Skip to main content
Top

2022 | OriginalPaper | Chapter

Prediction of the Bending Moments in Columns of Concentrically Braced Frames in the Chevron Configuration

Authors : Melina Bosco, Andrea Floridia, Edoardo Marino, Pier Paolo Rossi

Published in: Proceedings of the 10th International Conference on Behaviour of Steel Structures in Seismic Areas

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Several studies have shown that the application rules of the capacity design principle suggested for chevron braced frames are often not effective in preventing yielding or buckling of the columns of the braced frame. Indeed, the design procedures available in literature or in seismic codes either neglect or significantly underestimate bending moments in columns.
These bending moments are negligible when braces are in the elastic range of behaviour, but they may become significant because of concentration of the interstorey displacement demand when the braced frame overcomes its elastic range of behaviour and braces of a few stories experience large inelastic deformations. The high values of bending moments undermine the seismic performance of concentrically braced frames if yielding or buckling of the columns occurs prior to the full exploitation of the ductility capacity of braces.
A simple procedure has been recently proposed by the authors to estimate the bending moments in columns of braced frames at the achievement of the ductility capacity of braces. In this paper, the abovementioned procedure is applied to predict bending moments in columns of concentrically braced frames in the chevron configuration designed according to different design procedures available in literature. To assess the effectiveness of the procedure, the predicted values of bending moments are compared to those obtained by nonlinear dynamic analyses with reference to peak ground accelerations leading the structure to either significant damage or near collapse limit state.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Costanzo S, D’Aniello M, Landolfo R (2017) Seismic design criteria for chevron CBFs: proposal for the next EC8 (part-2). J Constr Steel Res 138:17–37CrossRef Costanzo S, D’Aniello M, Landolfo R (2017) Seismic design criteria for chevron CBFs: proposal for the next EC8 (part-2). J Constr Steel Res 138:17–37CrossRef
2.
go back to reference Marino EM, Nakashima M (2005) Seismic performance and new design procedure for chevron-braced frames. Earthquake Eng Struct Dynam 35(4):433–452CrossRef Marino EM, Nakashima M (2005) Seismic performance and new design procedure for chevron-braced frames. Earthquake Eng Struct Dynam 35(4):433–452CrossRef
3.
go back to reference Barbagallo F, Bosco M, Marino EM, Rossi PP (2021) Proposal and validation of a design procedure for concentrically braced frames in the chevron configuration. Earthquake Eng Struct Dyn 50:3041–3063CrossRef Barbagallo F, Bosco M, Marino EM, Rossi PP (2021) Proposal and validation of a design procedure for concentrically braced frames in the chevron configuration. Earthquake Eng Struct Dyn 50:3041–3063CrossRef
4.
go back to reference D’Aniello M, Costanzo S, Landolfo R (2015) The influence of beam stiffness on seismic response of chevron concentric braces. J Constr Steel Res 112:305–324CrossRef D’Aniello M, Costanzo S, Landolfo R (2015) The influence of beam stiffness on seismic response of chevron concentric braces. J Constr Steel Res 112:305–324CrossRef
5.
go back to reference Tan Q, Lehman DE, Roeder CW, Berman JW, Sen AD, Wu B (2021) Design-parameter study on seismic performance of chevron-configured SCBFs with yielding beams. J Constr Steel Res 179:106561CrossRef Tan Q, Lehman DE, Roeder CW, Berman JW, Sen AD, Wu B (2021) Design-parameter study on seismic performance of chevron-configured SCBFs with yielding beams. J Constr Steel Res 179:106561CrossRef
6.
go back to reference Longo A, Montuori R, Piluso V (2008) Plastic design of seismic resistant V-braced frames. J Earthquake Eng 12:1246–1266CrossRef Longo A, Montuori R, Piluso V (2008) Plastic design of seismic resistant V-braced frames. J Earthquake Eng 12:1246–1266CrossRef
7.
go back to reference Bosco M, Ghersi A, Marino EM, Rossi PP (2014) A capacity design procedure for columns of steel structures with diagonal braces. Open Constr Build Technol J 8(1):196–207CrossRef Bosco M, Ghersi A, Marino EM, Rossi PP (2014) A capacity design procedure for columns of steel structures with diagonal braces. Open Constr Build Technol J 8(1):196–207CrossRef
8.
go back to reference Kumar PCA, Anand S, Sahoo DR (2017) Modified seismic design of concentrically braced frames considering flexural demand on columns. Earthquake Eng Struct Dynam 46(10):1559–1580CrossRef Kumar PCA, Anand S, Sahoo DR (2017) Modified seismic design of concentrically braced frames considering flexural demand on columns. Earthquake Eng Struct Dynam 46(10):1559–1580CrossRef
9.
go back to reference (2004) CEN. EN 1998–1. EuroCode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings. Bruxelles: European Committee for Standardization (2004) CEN. EN 1998–1. EuroCode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings. Bruxelles: European Committee for Standardization
10.
go back to reference (2014) CSA. Design of Steel Structures, CSA-S16–14. Toronto: Canadian Standards Association (2014) CSA. Design of Steel Structures, CSA-S16–14. Toronto: Canadian Standards Association
11.
go back to reference Barbagallo F, Bosco M, Marino EM, Rossi PP (2021) Seismic performance and cost comparative analysis of steel braced frames designed in the framework of EC8. Eng Struct 240:112379CrossRef Barbagallo F, Bosco M, Marino EM, Rossi PP (2021) Seismic performance and cost comparative analysis of steel braced frames designed in the framework of EC8. Eng Struct 240:112379CrossRef
12.
go back to reference Marino EM (2014) A unified approach for the design of high ductility steel frames with concentric braces in the framework of Eurocode 8. Earthquake Eng Struct Dynam 43:97–118CrossRef Marino EM (2014) A unified approach for the design of high ductility steel frames with concentric braces in the framework of Eurocode 8. Earthquake Eng Struct Dynam 43:97–118CrossRef
13.
go back to reference Tremblay R, Archambault MH, Filiatrault A (2003) Seismic response of concentrically braced steel frames made with rectangular hollow bracing members. J Struct Eng ASCE 129(12):1626–1636CrossRef Tremblay R, Archambault MH, Filiatrault A (2003) Seismic response of concentrically braced steel frames made with rectangular hollow bracing members. J Struct Eng ASCE 129(12):1626–1636CrossRef
14.
go back to reference Uriz P, Filippou FC, Mahin SA (2008) Model for cyclic inelastic buckling of steel braces. J Struct Eng ASCE 134(4):619–628CrossRef Uriz P, Filippou FC, Mahin SA (2008) Model for cyclic inelastic buckling of steel braces. J Struct Eng ASCE 134(4):619–628CrossRef
Metadata
Title
Prediction of the Bending Moments in Columns of Concentrically Braced Frames in the Chevron Configuration
Authors
Melina Bosco
Andrea Floridia
Edoardo Marino
Pier Paolo Rossi
Copyright Year
2022
DOI
https://doi.org/10.1007/978-3-031-03811-2_118

Premium Partners