Top

Metals and Materials International

Published in:

03-03-2020

Process Parameter Optimization to Achieve Higher Impact Strength in SS316 Wire-Mesh and SiCp Reinforced Aluminum Composite Laminates Produced by Explosive Cladding

Authors: Lalu Gladson Robin, Krishnamurthy Raghukandan, Somasundaram Saravanan

Published in: Metals and Materials International | Issue 9/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this research paper, an empirical relationship is developed to envisage the impact strength of stainless steel wire-mesh and SiCp reinforced aluminum composite laminates produced through the explosive cladding. The process parameters viz., stand-off distance, explosive loading ratio, wire-mesh orientation and wt% of SiCp were optimized in four factors, three levels Box–Behnken design with full appropriateness. Analysis of Variance indicates that the wt% of SiCp possess the greatest sway on impact strength, trailed by stand-off distance, explosive loading ratio and wire-mesh orientation. The interfacial microstructure of the optimized condition reveals the presence of silicon carbide (SiC) as the wt% of SiCp is increased from 0 to 3%. X-ray diffraction analysis of the clad interface shows the absence of brittle intermetallic compounds. The impact fracture faces of the optimized clad reveals a ductile manner of fracture with elevated impact strength.

Graphic Abstract

previous article Significance of Finite Element Models and Solid-State Phase Transformation on the Evaluation of Weld Induced Residual Stresses

next article Structure Modification of a Rheocast Aluminum–Zinc Alloy by Friction Stir Butt Welding: Microstructural Evolution

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

H. Ji, J. Wang, M. Li, Evolution of the bulk microstructure in 1100 aluminum builds fabricated by ultrasonic metal welding. J. Mater. Process. Technol. 214, 175–182 (2014). https://doi.org/10.1016/j.jmatprotec.2013.09.005CrossRef

N.R. Mandal, Solid state welding, in Ship Construction and Welding, ed. by N.R. Mandal (Springer, Singapore, 2017), pp. 221–234. https://doi.org/10.1007/978-981-10-2955-4_16CrossRef

S. Saravanan, K. Raghukandan, P. Kumar, Effect of wire mesh interlayer in explosive cladding of dissimilar grade aluminum plates. J. Cent. South Univ. 26, 604–611 (2019). https://doi.org/10.1007/s11771-019-4031-9CrossRef

A.K. Bhalla, J.D. Williams, Production of stainless steel wire-reinforced aluminium composite sheet by explosive compaction. J. Mater. Sci. 12, 522–530 (1977). https://doi.org/10.1007/BF00540277CrossRef

S. Saravanan, K. Raghukandan, Diffusion kinetics in explosive cladding of dissimilar alloys as described through the miedema model. Arch. Metall. Mater. 59, 1615–1618 (2014). https://doi.org/10.2478/amm-2014-0274CrossRef

M. Acarer, B. Demir, An investigation of mechanical and metallurgical properties of explosive welded aluminum-dual phase steel. Mater. Lett. 62, 4158–4160 (2008). https://doi.org/10.1016/j.matlet.2008.05.060CrossRef

M. Acarer, Electrical, corrosion, and mechanical properties of aluminum-copper joints produced by explosive welding. J. Mater. Eng. Perform. 21, 2375–2379 (2012). https://doi.org/10.1007/s11665-012-0203-6CrossRef

N. Zhang, W. Wang, X. Cao, J. Wu, The effect of annealing on the interface microstructure and mechanical characteristics of AZ31B/AA6061 composite plates fabricated by explosive welding. Mater. Des. 65, 1100–1109 (2015). https://doi.org/10.1016/j.matdes.2014.08.025CrossRef

F. Grignon, D. Benson, K.S.S. Vecchio, M.A.A. Meyers, Explosive welding of aluminum to aluminum: analysis, computations and experiments. Int. J. Impact Eng. 30, 1333–1351 (2004). https://doi.org/10.1016/j.ijimpeng.2003.09.049CrossRef

10.

J.H. Han, J.P. Ahn, M.C. Shin, Effect of interlayer thickness on shear deformation behavior of AA5083 aluminum alloy/SS41 steel plates manufactured by explosive welding. J. Mater. Sci. 38, 13–18 (2003). https://doi.org/10.1023/A:1021197328946CrossRef

11.

S. Saravanan, K. Raghukandan, K. Hokamoto, Improved microstructure and mechanical properties of dissimilar explosive cladding by means of interlayer technique. Arch. Civ. Mech. Eng. 16, 563–568 (2016). https://doi.org/10.1016/j.acme.2016.03.009CrossRef

12.

B. Gülenç, Y. Kaya, A. Durgutlu, İ.T.T. Gülenç, M.S.S. Yıldırım, N. Kahraman, Production of wire reinforced composite materials through explosive welding. Arch. Civ. Mech. Eng. 16, 1–8 (2016). https://doi.org/10.1016/j.acme.2015.09.006CrossRef

13.

I.A.A. Bataev, A.A.A. Bataev, V.I.I. Mali, D.V.V. Pavliukova, Structural and mechanical properties of metallic–intermetallic laminate composites produced by explosive welding and annealing. Mater. Des. 35, 225–234 (2012). https://doi.org/10.1016/j.matdes.2011.09.030CrossRef

14.

M. Torkaman, H. Danesh-Manesh, M.M. Moshksar, M. Hosseini, Microstructure, mechanical properties and formability of CP-Ti/low carbon steel bimetallic sheet fabricated by explosive welding. Mater. Res. Express 6, 076542 (2019). https://doi.org/10.1088/2053-1591/ab15b8CrossRef

15.

S. Saravanan, K. Raghukandan, K. Hokamoto, Effect of process parameters on microstructural and mechanical properties of Ti–SS 304L explosive cladding. J. Cent. South Univ. 24, 1245–1251 (2017). https://doi.org/10.1007/s11771-017-3528-3CrossRef

16.

K. Raghukandan, Analysis of the explosive cladding of cu-low carbon steel plates. J. Mater. Process. Technol. 139, 573–577 (2003). https://doi.org/10.1016/S0924-0136(03)00539-9CrossRef

17.

M. Honarpisheh, M. Mohammadi Jobedar, I. Alinaghian, Multi-response optimization on single-point incremental forming of hyperbolic shape Al-1050/Cu bimetal using response surface methodology. Int. J. Adv. Manuf. Technol. 96, 3069–3080 (2018). https://doi.org/10.1007/s00170-018-1812-5CrossRef

18.

R. Zare, H. Sharifi, M.R. Saeri, M. Tayebi, Investigating the effect of SiC particles on the physical and thermal properties of Al6061/SiCp composite. J. Alloys Compd. 801, 520–528 (2019). https://doi.org/10.1016/J.JALLCOM.2019.05.317CrossRef

19.

L.G. Robin, K. Raghukandan, S. Saravanan, Wire mesh/ceramic particle reinforced aluminium based composite using explosive cladding. Mater. Sci. Forum 910, 9–13 (2018). https://doi.org/10.4028/www.scientific.net/msf.910.9CrossRef

20.

L.G. Robin, K. Raghukandan, S. Saravanan, Effect of SS 316 Wire mesh and SiCp ceramic particles on explosive cladding of dissimilar aluminium Al 5052 and Al 1100 plates subjected to varied loading ratios. J. Manuf. Eng. 12, 185–190 (2017)

21.

S.L.C. Ferreira, R.E. Bruns, H.S. Ferreira, G.D. Matos, J.M. David, G.C. Brandão, E.G.P. da Silva, L.A. Portugal, P.S. dos Reis, A.S. Souza, W.N.L. dos Santos, Box–Behnken design: an alternative for the optimization of analytical methods. Anal. Chim. Acta 597, 179–186 (2007). https://doi.org/10.1016/j.aca.2007.07.011CrossRef

22.

D. Baş, İ.H. Boyacı, Modeling and optimization I: usability of response surface methodology. J. Food Eng. 78, 836–845 (2007). https://doi.org/10.1016/J.JFOODENG.2005.11.024CrossRef

23.

G. Shanthos Kumar, K. Raghukandan, S. Saravanan, N. Sivagurumanikandan, Optimization of parameters to attain higher tensile strength in pulsed Nd: YAG laser welded Hastelloy C-276–Monel 400 sheets. Infrared Phys. Technol. 100, 1–10 (2019). https://doi.org/10.1016/j.infrared.2019.05.002CrossRef

24.

F. Ortega-Celaya, M.I. Pech-Canul, J. López-Cuevas, J.C. Rendón-Ángeles, M.A. Pech-Canul, Microstructure and impact behavior of Al/SiCp composites fabricated by pressureless infiltration with different types of SiCp. J. Mater. Process. Technol. 183, 368–373 (2007). https://doi.org/10.1016/J.JMATPROTEC.2006.10.029CrossRef

25.

M. Acarer, B. Gülenç, F. Findik, The influence of some factors on steel/steel bonding quality on there characteristics of explosive welding joints. J. Mater. Sci. 39, 6457–6466 (2004). https://doi.org/10.1023/B:JMSC.0000044883.33007.20CrossRef

26.

M.M. Hoseini-Athar, B. Tolaminejad, Weldability window and the effect of interface morphology on the properties of Al/Cu/Al laminated composites fabricated by explosive welding. Mater. Des. 86, 516–525 (2015). https://doi.org/10.1016/j.matdes.2015.07.114CrossRef

27.

P. Tamilchelvan, K. Raghukandan, S. Saravanan, Kinetic energy dissipation in TI-SS explosive cladding with multi loading ratios. Iran. J. Sci. Technol. Trans. Mech. Eng. 38, 91–96 (2014)

28.

M.D. Chadwick, P.W. Jackson, Explosive welding in planar geometries, in Explosive Welding in Planar Geometries, ed. by T.Z. Blazynski (Springer, Berlin, 1983), pp. 219–287. https://doi.org/10.1007/978-94-011-9751-9_7CrossRef

29.

S. Saravanan, K. Raghukandan, Thermal kinetics in explosive cladding of dissimilar metals. Sci. Technol. Weld. Join. 17, 99–103 (2012). https://doi.org/10.1179/1362171811y.0000000080CrossRef

30.

A. Loureiro, R. Mendes, J.B. Ribeiro, R.M. Leal, Effect of explosive ratio on explosive welding quality of copper to aluminium. Cienc. e Tecnol. Dos Mater. 29, 46–50 (2017). https://doi.org/10.1016/j.ctmat.2016.06.012CrossRef

31.

C. Borchers, M. Lenz, M. Deutges, H. Klein, F. Gärtner, M. Hammerschmidt, H. Kreye, Microstructure and mechanical properties of medium-carbon steel bonded on low-carbon steel by explosive welding. Mater. Des. 89, 369–376 (2016). https://doi.org/10.1016/j.matdes.2015.09.164CrossRef

32.

W. Sun, X. Li, H. Yan, Underwater explosive welding of tool steel. Explos. Shock Waves 36, 107–112 (2016). https://doi.org/10.11883/1001-1455(2016)01-0107-06CrossRef

33.

X. Guo, Y. Ma, K. Jin, H. Wang, J. Tao, M. Fan, Effect of stand-off distance on the microstructure and mechanical properties of Ni/Al/Ni laminates prepared by explosive bonding. J. Mater. Eng. Perform. 26, 4235–4244 (2017). https://doi.org/10.1007/s11665-017-2890-5CrossRef

34.

Å. Öberg, N. Mårtensson, J.-Å. Schweitz, Fundamental aspects of formation and stability of explosive welds. Metall. Trans. A. 16, 841–852 (1985). https://doi.org/10.1007/BF02814835CrossRef

35.

G. Effenberg, S. Ilyenko, Al–Fe–Si (aluminium–iron–silicon), in Light Metal Systems Part 2. Selected Systems from Al–Cu–Fe to Al–Fe–Ti, ed. by G. Effenberg, S. Ilyenko (Springer, Berlin, 2005), pp. 359–409. https://doi.org/10.1007/10915967_23CrossRef

36.

M.F. Ibrahim, E.M. Elgallad, S. Valtierra, H.W. Doty, F.H. Samuel, Metallurgical parameters controlling the eutectic silicon charateristics in Be-treated Al–Si–Mg alloys. Mater. (Basel) 9, 78 (2016). https://doi.org/10.3390/ma9020078CrossRef

37.

N. Parvin, R. Assadifard, P. Safarzadeh, S. Sheibani, P. Marashi, Preparation and mechanical properties of SiC-reinforced Al6061 composite by mechanical alloying. Mater. Sci. Eng. A 492, 134–140 (2008). https://doi.org/10.1016/J.MSEA.2008.05.004CrossRef

Title: Process Parameter Optimization to Achieve Higher Impact Strength in SS316 Wire-Mesh and SiCp Reinforced Aluminum Composite Laminates Produced by Explosive Cladding
Authors: Lalu Gladson Robin
Krishnamurthy Raghukandan
Somasundaram Saravanan
Publication date: 03-03-2020
Publisher: The Korean Institute of Metals and Materials
Published in: Metals and Materials International / Issue 9/2021
Print ISSN: 1598-9623
Electronic ISSN: 2005-4149
DOI: https://doi.org/10.1007/s12540-020-00641-9

Springer Professional

Abstract

Graphic Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9/2021

Effect of Surface Condition on the Torsional Fatigue Behaviour of 20MnCr5 Steel

Microstructure Evolution Mechanism and Corrosion Behavior of Transient Liquid Phase Bonded 304L Stainless Steel

Effect of Discharge Energy of Magnetic Pulse Compaction on the Powder Compaction Characteristics and Spring Back Behavior of Copper Compacts

Comparative Study on Microstructure and Aluminum Distribution Between Laser Beam Welding and Electron Beam Welding of Ti–6Al–4V Alloy Plates

Influence of Phase with GP-I Zones Fillings on Slip Behavior and Cold Rolling Texture in AA2099

Effect of Melting Rate of Electroslag Rapid Remelting on the Microstructure and Carbides in a Hot Work Tool Steel

Premium Partners