Top

Published in:

2014 | OriginalPaper | Chapter

Proposal for an Architectural Solution for Economic and Environmental Global Eco-Cost Assessment: Model Combination Analysis

Authors : Nicolas Perry, Alain Bernard, Magali Bosch-Mauchand, Julien Le Duigou, Yang Xu

Published in: Technology and Manufacturing Process Selection

Publisher: Springer London

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This chapter highlights the complementarities of cost and environmental evaluation in a sustainable approach. Starting with the needs and limits for whole product lifecycle evaluation, this chapter begins with the modeling, data capture and performance indicator aspects. Next, the information issue, regarding the whole lifecycle of the product, is addressed. In order to go further than economical evaluation/assessment, the value concept (for a product or a service) is discussed. Value can combine functional requirements, cost objectives and environmental impact. Finally, knowledge issues are discussed, addressing the complexity of integrating multi-disciplinary expertise into the whole lifecycle of a product.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Life Cycle Engineering Framework for Technology and Manufacturing Processes Evaluation

next chapter The Ecodesign of Complex Electromechanical Systems: Prioritizing and Balancing Performance Fields, Contributors and Solutions

Amman K (2002) Product lifecycle management ‘empowering the future of business. Cimdata report, available at www.cimdata.com

Ammar-Khodja S, Perry N, Bernard A (2008) Processing knowledge to support knowledge-based engineering systems specification. Concurrent Eng Res Appl(CERA) 16(1):89–101. doi:101177/1063293X07084642 CrossRef

Bachimont B, Isaac A, Troncy R (2002) Semantic commitment for designing ontologies: a tool proposal. Lect Notes Comput Sci 2473:211–258. doi:10.1007/3-540-45810-7_14

Bernard A, Perry N (2003) Fundamental concepts of product/technology/process informational integration for process modeling and process planning. Int Journal of Comput Integr Manuf 16(7–8):557–565. doi:10.1080/0951192031000115723 CrossRef

Bernard A (2005) Virtual engineering: methods and tools. Proc Inst Mech Eng Part B–J Eng Manuf 219(5):413–421. ISSN 0954–4054

Bernard A, Labrousse M, Perry N (2005) LC universal model for the enterprise information system structure. Innovation in life cycle engineering and sustainable development, Springer, New York, p 429–448 doi:10.1007/1-4020-4617-0_30

Bernard A, Ammar Khodja S, Perry N, Laroche F (2007) Virtual engineering based on knowledge integration. Virtual Phys Prototyping 2(3):137–154 doi:10.1080/17452750701677509

Bernard A, Xu Y (2009) An integrated knowledge reference system for product development. CIRP Ann—Manuf Technol 58(1):119–122. doi:10.1016/j.cirp.2009.03.013 CrossRef

Bernard A, Tichkiewitch S (eds) (2008) Methods and tools for effective knowledge life-cycle-management. Springer, Berlin, p 586. ISBN: 978-3-540-78430-2

Bigand M, Bourey JP, Perry N, Mauchand M (2007) Case studies in model integration. Int J Comput Integr Manuf 20(7):619–626. doi:10.1080/09511920701566434 CrossRef

Blanchard BS (1978) Design and manage to life cycle cost. M/A Press, Oregon, p 255. ISBN 10-0930206002

Bouin X, Simon FX (2000) Les nouveaux visages du contrôle de gestion, Approches Techniques et Comportementales. Dunod, Paris, p 292. ISBN 2-10004887-2

Brissaud D, Lelah A (2010) A framework for the design of sustainable product-service systems. In: Conference on Advances in Production Management Systems, APMS 2010 Como, Italy. ISBN: 978886493007-7

Butz HJ, Goodstein L (1997) Measuring customer value: gaining the strategic advantage. Organ Dyn 24(3):63–77. ISBN 0090-2616

Coatanea E, Kuuva M, Makkonen P, Saarelainen T (2007) Early design evaluation of products artifacts’: an approach based on dimensional analysis for combined analysis of environmental, technical and cost requirements. In: Advances in life cycle engineering for sustainable manufacturing businesses–14th life cycle engineering CIRP Conference proceedings Part 4-C2:365–370. doi:10.1007/978-1-84628-935-4_63

Degos JG (1998) La comptabilité, Collection Dominos In: Serres M, Farouki N (eds) Flammarion, Paris. ISBN 2-08-035538-4 (in French)

Doumeingts G, Vallespir B, Chen D (2006) GRAI Grid decisional modelling. In: Handbook on architectures of information system, part one Springer, Berlin, pp 321–346. doi:10.1007/3-540-26661-5_14

Du Preez N, Perry N, Candlot A, Bernard A, Uys W, Louw L (2005) Customised high-value document generation. CIRP Ann 54(1):123–126. doi:10.1016/S0007-8506(07)60064-X CrossRef

Elhamdi G (2005) Modelisation et simulation de chaines de valeurs en entreprise : Une approche dynamique des systèmes et aide à la décision : SimulValor PHD thesis in Ecole Centrale Paris (in French)

EPA (2010) Defining Life Cycle Assessment (LCA), wwwgdrcorg/uem/lca/lca-definehtml (Nov 2010)

Fabrycky WJ, Blanchard BS (1991) Life-cycle cost and economic analysis. Prentice Hall, New Jersey, p 352. ISBN 0135383234

Viadiu FM, Fa MC, Saizarbitoria IH (2006) ISO 9000 and ISO 14000 standards: an international diffusion model. Int J Oper Prod Manage 26(2):141–165. doi:10.1108/01443570610641648 CrossRef

Gosselin M, Mevellec P (2003) Development of a cladogram of cost management systems, 6th manufacturing accounting research conference. Twente, The Netherlands

Guinee JB (2002) Handbook on life cycle assessment–Operational guide to the ISO standards. Kluwer Academic Publishers, Boston, p 692. ISBN 1-4020-0228-9

Hendrickson C, Horvath A, Joshi S, Lave L (1998) Economic input-output models for environmental life-cycle assessment. Policy Anal 32(7):184–191. doi:10.1021/es983471i

H’Mida F (2002) Contribution à l’estimation des coûts en production mécanique : l’approche entité-coût appliquée dans un contexte d’ingénierie intégrée, PhD Thesis of Metz University, mars 2002 (in French)

Innes J, Mitchell F, Sinclair D (2000) Activity-based costing in the UK′s largest companies: a comparison of 1994 and 1999 survey results. Manage Acc Res 11:349–362. doi:10.1006/mare.2000.0135 CrossRef

Johansson G (2001) Environmental performance requirements in product development: an exploratory study of two development projects. Ph.D Thesis of Linköping University

Jun HB, Kiritsis D, Xirouchakis P (2007) Closed-loop PLM, advanced manufacturing—an ICT and systems perspective. In: M.Taisch (ed) Taylor and Francis, London pp 79–87. ISBN 978-0-415-42612-2

Kaplinsky R (2004) Spreading the gains from globalization: what can be learned from value-chain analysis? Problems of Economic Transition, M.E.Sharpe 47(2):74–115

Kosanke K, Zelm M (1999) CIMOSA modelling processes. Comput Ind 40:141–153. doi:10.1016/S0166-3615(99)00020-2 CrossRef

Labrousse M, Bernard A, Véron P (2004) In: Horwvath I, Xirouchakis P (eds) Generic FBS concept for process/product/resource integration, tools and methods of competitive engineering, vol 1. Millpress, Rotterdam, pp 384–394. ISBN 90-5966-018-8

Le Duigou J, Bernard A, Perry N, Delplace JC (2009) Global approach for technical data management, application to ship equipment part families. CIRP J Manuf Sci Technol 1(3):185–190. doi:10.1016/j.cirpj.2008.10.005 CrossRef

Le Duigou J, Bernard A, Perry N (2011) Framework for product lifecycle management integration in small and medium enterprises networks. Compu-Aided Des Appl 8(4):531–544

Le Duigou J, Bernard A, Perry N, Delplace JC (2012) Generic PLM system for SMEs: application to an equipment manufacturer. Int J Product Lifecycle Manage 6(1):51–64. doi:10.1504/IJPLM.2012.046429 CrossRef

Mauchand M, Siadat A, Perry N, Bernard A (2010) VCS: value chains simulator, a tool for value analysis of manufacturing enterprise processes (a value-based decision support tool). J Intell Manuf . doi:10.1007/s10845-010-0452

Mevellec P, Lebas M (1998) Managing simultaneously cost and value: the challenge. The role of management accounting in creating value. IFAC Publication, New York, p 13–25

Mevellec P, Perry N (2006) Whole life cycle cost: a new approach. Int J Prod Lifecycle Manag Inderscience 1(4):400–414

Missikoff M, Navigli R, Velardi P (2002) Integrated approach to web ontology learning and engineering. Computer 35(11):60–63. doi:10.1109/MC.2002.1046976 CrossRef

Norman R, Ramirez R (1993) From value chain to value constellation: designing interactive strategy. Harvard Bus Rev 71(4):65–77

Perrin G (1963) Prix de revient et contrôle de gestion par la méthode GP (in French). Dunod, Paris

Perrin J (1996) Cohérence, pertinence et évaluation économique des activités de conception, in Cohérence Pertinence et Evaluation. Ecosip Economica, Paris. ISBN 2-71-783023-1

Perry N, Bernard A, Delplace JC (2007) Concurrent cost engineering for decisional and operational process enhancement in a foundry. Int J Prod Econ 109(1–2):2–11. doi.org/10.1016/j.ijpe.2006.11.001

Porter M (1998) Competitive advantage: creating and sustaining superior performance, Harvard Business Review. Free Press, New York. ISBN 0-684-84146-0

Ritzén S, Beskow C (2001) Actions for integrating environmental aspects into product development. J Sustain Prod Des 1:91–102. doi:10.1023/A:1014446421205 CrossRef

Satish J (1999) Product environmental life-cycle assessment using input-output techniques. J Ind Ecol 3(2–3):95–120

Scheer AW (1998) ARIS handbook on architectures of information systems. Springer, New York, pp 541–566

Seager TP, Theis TL (2004) A taxonomy of metrics for testing the industrial ecology hypotheses and application to design of freezer insulation. J Cleaner Prod 12(8–10):865–875. doi:10.1016/j.jclepro.2004.02.032 CrossRef

Szargut J, Morris DR, Steward FR (1988) Exergy analysis of thermal, chemical and metallurgical processes. Hemisphere Publishing, NY, p 322

Ventère J (1995) La qualité écologique des produits – Des écobilans aux écolabels, 166p (in French). Éditions Sang de la Terre, AFNOR, Paris

White SA (2004) Introduction to BPMN, http://wwwbpmnorg/

Williams TJ (1994) The purdue enterprise reference architecture. Comput Ind 24:141–158. doi:10.1016/0166-3615(94)90017-5 CrossRef

Wimmer W, Zust R, Lee KM (2004) Ecodesign Implementation: a systematic guidance on integrating environmental considerations into product development. Springer, Dordrecht, p 145. ISBN 1-4020-3070-3

Xu Y, Bernard A (2009) Knowledge organization through statistical computation: a new approach. Knowl Organ 36(4):227–239

Zeithaml VA (1988) Consumer perceptions of price quality, and value: a means-end model and synthesis of evidence. J Mark 52:2–22CrossRef

Title: Proposal for an Architectural Solution for Economic and Environmental Global Eco-Cost Assessment: Model Combination Analysis
Authors: Nicolas Perry
Alain Bernard
Magali Bosch-Mauchand
Julien Le Duigou
Yang Xu
Publisher: Springer London
Book: Technology and Manufacturing Process Selection
Print ISBN: 978-1-4471-5543-0

Electronic ISBN: 978-1-4471-5544-7

Copyright Year: 2014
DOI: https://doi.org/10.1007/978-1-4471-5544-7_12

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Springer Professional "Wirtschaft"

Premium Partners