Top

Published in:

2011 | OriginalPaper | Chapter

58. Recycling and Environmental Aspects

Author : Prof. Chiaki Sato

Published in: Handbook of Adhesion Technology

Publisher: Springer Berlin Heidelberg

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Recycling and environmental aspects of adhesion technology are discussed in this chapter. Adhesively bonded adherends should be often separated before they can be recycled. For this purpose, dismantlable adhesives, which can be separated with stimulations, have been developed recently. There are lots of technical processes to realize such adhesives. For example, softening of adhesive, expansion force due to blowing agents or thermally expandable microcapsules, chemical degradation, electrochemical reaction, and taking advantage of interfacial phenomena can be applied to dismantlable adhesives. These adhesives have many applications such as temporary joints of work materials, shoe making, integrated circuits (IC) chip fabrication, electronics, housing construction, car fabrication, and so on. The most used trigger to start the separation of these adhesives is heating. Many kinds of methods including infrared, induction, and microwave heating are recently available. In addition, novel dismantlable adhesives, which have anisotropy in strength or are triggered by electric currents, have been presented.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Adhesion in Medicine

next chapter Adhesion Technology Recap – Current and Emerging Areas

Alcorta J, Papon E et al (2004) WO Patent 2004/087829

Bain PS, Manfre G (2000) WO Patent 2000/75254

Chang EP (1991) Viscoelastic windows of pressure-sensitive adhesives. J Adhes 34:189CrossRef

Chino K (2006) Thermoreversible crosslinking rubber using supramolecular hydrogen bonding networks. Kautschuk Gummi Kunststotte 2006, April:158

Chino K, Ashiura M (2001) Themoreversible cross-linking rubber using supramolecular hydrogen-bonding networks. Macromolecules 34:9201CrossRef

Chino K, Ashiura M et al (2002) Thermo reversible crosslinking rubber using supramolecular hydrogen bonding networks. Rubber Chem Technol 75:713CrossRef

Fay P (2005) History of adhesive bonding. In: Adams R (ed) Adhesive bonding – science, technology and applications. Woodhead, Cambridge, pp 3–22CrossRef

Horner M, Boerio J (1990) Cathodic delamination of an epoxy/polyamide coating from steel. J Adhes 32:141CrossRef

Ishikawa H, Seto K et al (2004) Dismantlable adhesive and evaluation of practical uses for building materials. J Soc Mater Sci Japan 53:1143 (in Japanese)CrossRef

Ishikawa H, Seto K et al (2005) Bond strength and disbonding behavior of elastomer and emulsion-type dismantlable adhesives used for building materials. Int J Adhes Adhes 25:193CrossRef

Jos H, Leite L (2007) MSc thesis, Faculty of Engineering of the University of Porto (in Portuguese)

Kadota J, Hasegawa K et al (2004) Adhesive of lignophenols/polyacrylate for wood. J Adhes Soc Japan 40:101 (in Japanese)

Kishi H, Inada Y et al (2006) Design of dismantlable structural adhesives with high temperature performance. J Adhes Soc Japan 42:356 (in Japanese)

Krawinkel Th (2003) In: Proceedings of Swiss Bonding 03, Rapperswill, Switzerland, pp 225–233 (in German)

Lee H, Lee B et al (2007) A reversible wet/dry adhesive inspired by mussels and geckos. Nature 448:338CrossRef

Matsumoto A, Taketani S (2006) Regiospecific radical polymerization of a tetra-substituted ethylene monomer with molecular oxygen for the synthesis of a new degradable polymer. J Am Chem Soc 128:4566CrossRef

Mori S, Harano K (2009) Shuzu no seikei kakou. Seikei kakou 21:305 (in Japanese)

Nishida H, Hirayama N (2006) PCT/JP2006/309543 Patent

Nishiyama Y, Sato C (2005) Behavior of dismantlable adhesives including thermally expansive microcapsules. In: Possart W (ed) Adhesion – current research and applications. Wiley, New York, pp 555–568

Nishiyama Y, Uto N et al (2003) Dismantlement behavior and strength of dismantlable adhesive including thermally expansive particles. Int J Adhes Adhes 23:377CrossRef

Papon E, Olive M et al (2008) In: Proceedings of the 31st annual meeting of the adhesion society, Austin, USA, pp 296–297

Ratna D, Banthia A (2000) Epoxidized soybean oil toughened epoxy adhesive. J Adhes Sci Tech 14:15CrossRef

Sauer H, Spiekermann S et al (2004) Accelerated curing with microwaves and nanoferrites. Adhesion. Adhes & Sealants 2003/2004:48–50

Sekine T, Tomita H et al (2009) An induction heating method with traveling magnetic field for long structure metal. Electr Eng Japan 168:32CrossRef

Shiote H, Ohe M et al (2009) Effects of electrical treatment conditions on dismantlable properties of joints bonded with electrically disbanding adhesive. J Adhes Soc Japan 45:376 (in Japanese)

Sprenger S, Eger C et al (2004) Nano-modified ambient temperature curing epoxy adhesives. Adhesion. Adhes & Sealants 2003/2004:20–23

Umemura K, Inoue A et al (2003) Development of new natural polymer-based wood adhesives I: dry bond strength and water resistance of konjac glucomannan, chitosan, and their composites. J Wood Sci 49:221CrossRef

Viljanmaa M, Sodergard A et al (2002) Lactic acid based polymers as hot melt adhesives for packaging applications. Int J Adhes Adhes 22:219CrossRef

Welsh J, Higgins J et al (2003) Evaluation of electrically disbonding adhesive properties for use as separation systems. In: AIAA 2003-1436 (44th AIAA/ASME/ASCE/AHS structures, structural dynamics, and materials conference), Norfolk, USA, pp 1–3

Yamada K, Chen T et al (2000) Chitosan based water-resistant adhesive. Analogy to mussel glue. Biomacromolecules 1:252CrossRef

Title: Recycling and Environmental Aspects
Author: Prof. Chiaki Sato
Publisher: Springer Berlin Heidelberg
Book: Handbook of Adhesion Technology
Print ISBN: 978-3-642-01168-9

Electronic ISBN: 978-3-642-01169-6

Copyright Year: 2011
DOI: https://doi.org/10.1007/978-3-642-01169-6_58

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners