Top

The International Journal of Advanced Manufacturing Technology

Published in:

18-11-2022 | ORIGINAL ARTICLE

Research on process simulation and surface quality of the thin-walled neck by precision boring

Authors: Zhongpeng Zheng, Jiajing Guo, Ruilin Gao, Xin Jin, Zhenwei Jiang, Chaojiang Li

Published in: The International Journal of Advanced Manufacturing Technology | Issue 11-12/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Thin-walled parts are critical structural components in the aircraft industry. However, because thin-walled parts have low stiffness, it is impossible to eliminate the elastic deformation generated by cutting force during the machining process, resulting in poor machining accuracy. In this paper, the simulation and surface roughness prediction model of thin-walled necks with ribbed constrained at both ends were constructed to understand the deformation mechanism and processing quality of thin-walled necks. The deformation mechanism of thin-walled necks with thin rib structures was revealed, and the deformation mode of the “S” shape to the “V” shape of fine boring thin-walled parts was analyzed. Then, the temperature field and the residual stress of the thin-walled neck with the spindle speed, feed, and depth of cut were revealed. Finally, the surface roughness prediction model for thin-walled parts is established using multiple regression functions. This study provides a theoretical foundation and technical assistance for managing the boring quality of thin-walled items by deeply understanding the machining deformation and cutting process mechanism.

previous article Heat input characteristics and weld bead formation in double-wire double-pulsed GMAW of aluminum alloy under different low-frequency phases

next article Tool wear prediction based on convolutional bidirectional LSTM model with improved particle swarm optimization

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Ge G, Xiao Y, Feng X, Du Z (2022) An efficient prediction method for the dynamic deformation of thin-walled parts in flank milling. CAD Comput Aided Des 152. https://doi.org/10.1016/j.cad.2022.103401

Balaji M, Mala C, Siva MS (2020) A Novel Method for Fault Tolerance Intelligence Advisor System (FT-IAS) for Mission Critical Operations. In: A Journey Towards Bio-inspired Techniques in Software Engineering. Springer, pp 29–46

Sushchenko O (2022) Modeling Dynamically Tuned Gyroscopes. In: 2022 IEEE 16th International Conference on Advanced Trends in Radioelectronics, Telecommunications and Computer Engineering (TCSET). pp 124–127

Dai M, Zhang C, Lu J (2019) In-field calibration method for DTG IMU including g-sensitivity biases. IEEE Sens J 19:4972–4981CrossRef

Junqueira FDC, de Barros EA (2004) Development of a Dynamically Tuned Gyroscope – Dtg. ABCM Symp Ser Mechatron 1:470–478

Jin X, Gao R, Li C et al (2022) On-machine measurement and temperature compensation method of NURBS surface interpolation for semicircular narrow neck thickness based on ultra-precision machine tool[J]. Meas Sci Technol 33(6):065008

Wang X, Ma P, Peng X, Ning S (2020) Study on vibration suppression performance of a flexible fixture for a thin-walled casing. Int J Adv Manuf Technol 106:4281–4291. https://doi.org/10.1007/s00170-019-04696-wCrossRef

Wang G, Li WL, Tong G, Pang CT (2017) Improving the machining accuracy of thin-walled parts by online measuring and allowance compensation. Int J Adv Manuf Technol 92:2755–2763. https://doi.org/10.1007/s00170-017-0358-2CrossRef

10.

Li B, Deng H, Hui D et al (2020) A semi-analytical model for predicting the machining deformation of thin-walled parts considering machining-induced and blank initial residual stress. Int J Adv Manuf Technol 110:139–161. https://doi.org/10.1007/s00170-020-05862-1CrossRef

11.

Ratchev S, Liu S, Huang W, Becker AA (2006) An advanced FEA based force induced error compensation strategy in milling. Int J Mach Tools Manuf 46:542–551. https://doi.org/10.1016/j.ijmachtools.2005.06.003CrossRef

12.

Xu J, Xu L, Geng Z et al (2020) 3D surface topography simulation and experiments for ball-end NC milling considering dynamic feedrate. CIRP J Manuf Sci Technol 31:210–223CrossRef

13.

Daniyan I, Fameso F, Ale F et al (2020) Modelling, simulation and experimental validation of the milling operation of titanium alloy (Ti6Al4V). Int J Adv Manuf Technol 109:1853–1866CrossRef

14.

Gupta MK, Korkmaz ME, Sarıkaya M et al (2022) In-process detection of cutting forces and cutting temperature signals in cryogenic assisted turning of titanium alloys: An analytical approach and experimental study. Mech Syst Signal Process 169:108772CrossRef

15.

Bolar G, Joshi SN (2018) Numerical Modeling and Experimental Validation of Machining of Low-Rigidity Thin-Wall Parts. In: Precision Product-Process Design and Optimization. Springer, pp 99–122

16.

Sun H, Fu S, Jin H, Fu Y (2018) Numerical Simulation of Workpiece Deformation in Thin-Wall Milling under Coupled Thermal-Mechanical Conditions. In: 2018 Eighth International Conference on Instrumentation \& Measurement, Computer, Communication and Control (IMCCC). pp 20–24

17.

Yi J, Xiang J, Yi F et al (2020) Prediction of mesoscale deformation in milling micro thin wall based on cantilever boundary. Int J Adv Manuf Technol 106:2875–2892CrossRef

18.

Liu H, Wang C, Han L et al (2021) The influence of ice-based fixture on suppressing machining-induced deformation of cantilever thin-walled parts: a novel and green fixture. Int J Adv Manuf Technol 117:329–341CrossRef

19.

Jia Z, Lu X, Gu H et al (2021) Deflection prediction of micro-milling Inconel 718 thin-walled parts. J Mater Process Technol 291:117003. https://doi.org/10.1016/j.jmatprotec.2020.117003CrossRef

20.

Gao H, Li X, Wu Q et al (2022) Effects of residual stress and equivalent bending stiffness on the dimensional stability of the thin-walled parts. Int J Adv Manuf Technol 119:4907–4924. https://doi.org/10.1007/s00170-021-08252-3CrossRef

21.

Wang X, Zhao B, Ding W et al (2022) A short review on machining deformation control of aero - engine thin - walled casings. Int J Adv Manuf Technol 2971–2985. https://doi.org/10.1007/s00170-022-09546-w

22.

Li Y, Cheng X, Ling S et al (2022) Study on deformation and compensation for micromilling of thin walls. Int J Adv Manuf Technol 120:2537–2546. https://doi.org/10.1007/s00170-022-08798-wCrossRef

23.

Hou Y, Zhang D, Zhang Y, Wu B (2021) The variable radial depth of cut in finishing machining of thin-walled blade based on the stable-state deformation field. Int J Adv Manuf Technol 113:141–158. https://doi.org/10.1007/s00170-020-06472-7CrossRef

24.

Dong H, Ji Y, Wang X, Bi Q (2021) Stability analysis of thin-walled parts end milling considering cutting depth regeneration effect. Int J Adv Manuf Technol 113:3319–3328. https://doi.org/10.1007/s00170-021-06610-9CrossRef

25.

Bolar G, Joshi SN (2014) 3D finite element modeling of thin-wall machining of aluminum 7075-T6 alloy. 5th Int 26th All India Manuf Technol Des Res Conf 135 (1–6)

26.

Zhuo Y, Han Z, An D, Jin H (2021) Surface topography prediction in peripheral milling of thin-walled parts considering cutting vibration and material removal effect. Int J Mech Sci 211:106797. https://doi.org/10.1016/j.ijmecsci.2021.106797CrossRef

27.

Weber D, Kirsch B, Jonsson JE et al (2022) Simulation based compensation techniques to minimize distortion of thin-walled monolithic aluminum parts due to residual stresses. CIRP J Manuf Sci Technol 38:427–441. https://doi.org/10.1016/j.cirpj.2022.05.016CrossRef

28.

Zheng Z, Ni C, Yang Y et al (2021) Numerical analysis of serrated chip formation mechanism with Johnson-Cook parameters in micro-cutting of Ti6Al4V. Metals (Basel) 11:1–22. https://doi.org/10.3390/met11010102CrossRef

29.

Artois K , Schutten G , Noordman B (2018) Correction method for thermomechanical strain in internal sting balances based on thermal modal analysis[C]// 11th International Symposium on Strain-Gauge Balances (ISSGB)

30.

Mabrouki T, Rigal JF (2006) A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning. J Mater Process Technol 176:214–221. https://doi.org/10.1016/j.jmatprotec.2006.03.159CrossRef

31.

Li C, Piao Y, Hu Y et al (2021) Modelling and experimental investigation of temperature field during fly-cutting of KDP crystals. Int J Mech Sci 210:106751. https://doi.org/10.1016/j.ijmecsci.2021.106751CrossRef

32.

Rajaguru J, Dwivedi M, Natarajan S et al (2022) Machining induced residual stress prediction during orthogonal cutting of super duplex stainless steel using CEL approach. J Manuf Process 82:474–487CrossRef

33.

Jiang X, Kong X, He S, Wu K (2021) Modeling the superposition of residual stresses induced by cutting force and heat during the milling of thin-walled parts. J Manuf Process 68:356–370CrossRef

34.

Wan M, Ye X-Y, Yang Y, Zhang W-H (2017) Theoretical prediction of machining-induced residual stresses in three-dimensional oblique milling processes. Int J Mech Sci 133:426–437CrossRef

35.

Akhtar W, Lazoglu I, Liang SY (2022) Prediction and control of residual stress-based distortions in the machining of aerospace parts: A review. J Manuf Process 76:106–122CrossRef

36.

Sarıkaya M, Gupta MK, Tomaz I et al (2021) A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys. CIRP J Manuf Sci Technol 35:624–658. https://doi.org/10.1016/j.cirpj.2021.08.005CrossRef

Title: Research on process simulation and surface quality of the thin-walled neck by precision boring
Authors: Zhongpeng Zheng
Jiajing Guo
Ruilin Gao
Xin Jin
Zhenwei Jiang
Chaojiang Li
Publication date: 18-11-2022
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 11-12/2022
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-10541-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11-12/2022

Theoretical and numerical studies of surface microstructural transformation in ultrasonic elliptical vibration cutting tungsten heavy alloys

Machinability analysis and optimisation of EDM in AA6082/3 wt% BN/1 wt% MoS2 hybrid composites using entropy method weights integrated with complex proportional assessment (COPRAS) method

A machine learning approach for ball milling of alumina ceramics

Research progress of low spatter CO2 welding technology

Milling optimization of GH4169 nickel–based superalloy under minimal quantity lubrication condition based on multi-objective particle swarm optimization algorithm

Design and development of a micro-LDH apparatus to determine formability of sheet metal under hot stamping conditions using Gleeble

Premium Partners