Top

European Journal of Wood and Wood Products

Published in:

02-03-2023 | Original Article

Response surface methodology approach for dyeing process optimization of Ayous (Triplochiton scleroxylon) wood with acid dye

Authors: Shiqian Wu, Limin Peng, Feng Fu, Yun Feng, Jinrong He, Huishan Wang

Published in: European Journal of Wood and Wood Products | Issue 4/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Dyeing of wood is an important value-adding process. An important indicator in the assessment of the performance of wood dyeing process is the dye penetration. In the present study, the existing method of response surface methodology was extended to study the dyeing process optimization of Ayous (Triplochiton scleroxylon) wood with acid dye using the radial dye penetration percentage as an indicator. The experiments were carried out on the basis of a single factor experiment, and the optimal condition was determined by means of the Box–Behnken Design of response surface methodology. The effects of temperature, dye concentration, dyeing time and accelerant mass fraction on the radial dye penetration percentage of Ayous wood were optimized. The experimental results showed that the maximum radial dye permeability can be achieved under optimum dyeing temperature (86.03 °C), dye concentration (0.31%), dyeing time (8 h), and accelerant mass fraction (2.23%). Under these conditions, the maximum dye-uptake and radial dye penetration percentage were found to be 14.28% and 22.34%, respectively. The results of analysis of variance indicated that the mathematical model proposed in this study can be used to predict the dye-uptake and radial dye penetration percentage of acid dye on Ayous wood by changing the process parameters.

previous article Transitioning to data-driven quality control in industrial veneer drying: a case study

next article The use of enzymatic pre-treatment to facilitate and reduce the energy consumption of unbleached cellulose micro/nanofibrils production from Eucalyptus spp. and Pinus spp. kraft pulps

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 340 Zeitschriften

aus folgenden Fachgebieten:

Bauwesen + Immobilien
Business IT + Informatik
Finance + Banking
Management + Führung
Marketing + Vertrieb
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Ahmad AA, Hameed BH (2010) Effect of preparation conditions of activated carbon from bamboo waste for real textile wastewater. J Hazard Mater 173(1):487–493. https://doi.org/10.1016/j.jhazmat.2009.08.111CrossRefPubMed

Amini M, Younesi H (2009) Biosorption of Cd(II), Ni(II) and Pb(II) from aqueous solution by dried biomass of Aspergillus niger: application of response surface methodology to the optimization of process parameters. CLEAN Soil Air Water 37(10):776–786. https://doi.org/10.1002/clen.200900090CrossRef

Antony J (2014) Design of experiments for engineers and scientists. Elsevier, London

Anupam K, Dutta S, Bhattacharjee C, Datta S (2011) Adsorptive removal of chromium (VI) from aqueous solution over powdered activated carbon: optimisation through response surface methodology. Chem Eng J 173(1):135–143. https://doi.org/10.1016/j.cej.2011.07.049CrossRef

Azargohar R, Dalai AK (2005) Production of activated carbon from Luscar char: experimental and modeling studies. Microporous Mesoporous Mater 85(3):219–225. https://doi.org/10.1016/j.micromeso.2005.06.018CrossRef

Bao M, Huang X, Zhang Y, Yu W, Yu Y (2016) Effect of density on the hygroscopicity and surface characteristics of hybrid poplar compreg. J Wood Sci 62(5):441–451. https://doi.org/10.1007/s10086-016-1573-4CrossRef

Borrega M, Ahvenainen P, Serimaa R, Gibson L (2015) Composition and structure of balsa (Ochroma pyramidale) wood. Wood Sci Technol 49(2):403–420. https://doi.org/10.1007/s00226-015-0700-5CrossRef

Box GEP, Wilson KB (1951) On the experimental attainment of optimum conditions. J Roy Stat Soc Ser B Method 13(1):1–45

Chen Y, Wu Z (2015) Wood bleaching and dyeing. China Forestry Publishing House, Beijing

Chen Y, Lu R, Zheng R (2000) Effects of Paulownia veneer dyeing factors to the chromatism. China Wood Ind 14(4):10–12

Comstock GL (2007) Directional permeability of softwoods. Wood Fiber Sci 1:283–289

Convert R, Schacher L, Viallier P (2000) An expert system for the dyeing recipes determination. J Intell Manuf 11(2):145–155. https://doi.org/10.1023/A:1008986732187CrossRef

Danish M, Hashim R, Ibrahim MNM, Sulaiman O (2014a) Optimized preparation for large surface area activated carbon from date (Phoenix dactylifera L.) stone biomass. Biomass Bioenerg 61:167–178. https://doi.org/10.1016/j.biombioe.2013.12.008CrossRef

Danish M, Hashim R, Mohamad Ibrahim MN, Sulaiman O (2014b) Response surface methodology approach for methyl orange dye removal using optimized Acacia mangium wood activated carbon. Wood Sci Technol 48(5):1085–1105. https://doi.org/10.1007/s00226-014-0659-7CrossRef

Danish M, Khanday WA, Hashim R, Sulaiman NSB, Akhtar MN, Nizami M (2017) Application of optimized large surface area date stone (Phoenix dactylifera) activated carbon for rhodamin B removal from aqueous solution: Box–Behnken design approach. Ecotoxicol Environ Saf 139:280–290. https://doi.org/10.1016/j.ecoenv.2017.02.001CrossRefPubMed

Das A, Mishra S (2017) Removal of textile dye reactive green-19 using bacterial consortium: process optimization using response surface methodology and kinetics study. J Environ Chem Eng 5(1):612–627. https://doi.org/10.1016/j.jece.2016.10.005CrossRef

Deng H, Liu Y (2010) Study on environmental-friendly dyeing processes of fast-growing plantation veneers. In: 2010 4th international conference on bioinformatics and biomedical engineering, 18–20 June 2010, pp 1–4

Deng S, Wang C, Lin J, Chen X (2019) Optimization of the freeze-thaw cycle pretreatment process of Chinese fir wood using the response surface method. J For Environ 39(06):647–653. https://doi.org/10.13324/j.cnki.jfcf.2019.06.013CrossRef

Duan X (2002) Wood color control technology. China Building Materials Press, Beijing

Ghaedi M, Khafri HZ, Asfaram A, Goudarzi A (2016) Response surface methodology approach for optimization of adsorption of Janus Green B from aqueous solution onto ZnO/Zn(OH)2-NP-AC: kinetic and isotherm study. Spectrochim Acta A Mol Biomol Spectrosc 152:233–240. https://doi.org/10.1016/j.saa.2015.06.128CrossRefPubMed

Hazir E, Ozcan T (2019) Response surface methodology integrated with desirability function and genetic algorithm approach for the optimization of CNC machining parameters. Arab J Sci Eng 44(3):2795–2809. https://doi.org/10.1007/s13369-018-3559-6CrossRef

Hu J, Fan W, Li L, Guo H (2016) Optimal dyeing process for maple veneer. J Northeast For Univ 44(08):68–72

Hu J, Liu Y, Wu Z (2020) Structural color for wood coloring: a review. Bioresources 15(4):9917–9934CrossRef

Jardine DI, Blanc-Jolivet C, Dixon RRM, Dormontt EE, Dunker B, Gerlach J et al (2016) Development of SNP markers for Ayous (Triplochiton scleroxylon K. Schum) an economically important tree species from tropical West and Central Africa. Conserv Genet Resour 8(2):129–139. https://doi.org/10.1007/s12686-016-0529-8CrossRef

Jaxel J, Amer H, Bacher M, Roller A, Guggenberger M, Zwirchmayr NS et al (2020) Facile synthesis of 1-butylamino- and 1,4-bis(butylamino)-2-alkyl-9,10-anthraquinone dyes for improved supercritical carbon dioxide dyeing. Dyes Pigments 173:107991. https://doi.org/10.1016/j.dyepig.2019.107991CrossRef

Khataee AR, Kasiri MB, Alidokht L (2011) Application of response surface methodology in the optimization of photocatalytic removal of environmental pollutants using nanocatalysts. Environ Technol 32(15):1669–1684. https://doi.org/10.1080/09593330.2011.597432CrossRef

Knudson R, Brunette G (2015) Evaluation of Canadian Prairie-grown hybrid poplar for high value solid wood products. For Chron 91(02):141–149. https://doi.org/10.5558/tfc2015-025CrossRef

Li Y, Liu Y, Wang F, Gang G (2011) Controlling factors of wood permeability and its improving measures. Sci Silv Sin 47(5):131–139

Li M, Yao J, Cui S (2013) New technology of dyeing and finishing. Science Press, Beijing

Liu Y, Hu J, Gao J, Guo H, Chen Y, Cheng Q et al (2015) Wood veneer dyeing enhancement by ultrasonic-assisted treatment (review). Bioresources 10(1):1198–1212CrossRef

Liu Y, Yu Z, Zhang Y, Qi C, Tang R, Zhao B et al (2020) Microbial dyeing-infection behavior and influence of Lasiodiplodia theobromae in poplar veneer. Dyes Pigments 173:107988. https://doi.org/10.1016/j.dyepig.2019.107988CrossRef

Liu M, Lyu S, Peng L, Cai L, Huang Z, Lyu J (2021a) Improvement of toughness and mechanical properties of furfurylated wood by biosourced epoxidized soybean oil. ACS Sustain Chem Eng 9(24):8142–8155. https://doi.org/10.1021/acssuschemeng.1c01358CrossRef

Liu M, Lyu S, Peng L, Lyu J, Huang Z (2021b) Radiata pine fretboard material of string instruments treated with furfuryl alcohol followed by tung oil. Holzforschung 75(5):480–493. https://doi.org/10.1515/hf-2020-0048CrossRef

López G, Basterra L-A, Acuña L (2018) Infrared thermography for wood density estimation. Infrared Phys Technol 89:242–246. https://doi.org/10.1016/j.infrared.2018.01.015CrossRef

Lv J, Bao F, Jiang X, Zhao M (1994) Effect of steaming on the permeability of wood. Sci Silv Sin 30(4): 352–357, 386–388

Machová D, Baar J, Paschová Z, Pařil P, Křenková J, Kúdela J (2019) Color changes and accelerated ageing in oak wood treated with ammonia gas and iron nanoparticles. Eur J Wood Prod 77(4):705–716. https://doi.org/10.1007/s00107-019-01406-xCrossRef

Meng F, Wu B, Yu Y, Yu W (2016a) Effect of thicker veneers on properties of laminated veneer lumber. China Wood Ind 30(03):5–8

Meng F, Wu B, Yu Y, Yu W (2016b) Manufacturing technology and application of laminated veneer lumber made with thicker veneers. China Wood Ind 30(04):13–16

Mikhailovskaya AP, Dashchenko NV, Dyankova TY, Dmitrieva IB (2001) Enhancing the effect of surfactants in dyeing of aramid fibres. Fibre Chem 33(4):271–274CrossRef

Ndukwu MC, Bennamoun L, Simo-Tagne M, Ibeh MI, Abada UC, Ekop IE (2021) Influence of drying applications on wood, brick and concrete used as building materials: a review. J Build Pathol Rehabil 6(1):24. https://doi.org/10.1007/s41024-021-00119-0CrossRef

Nguyen N, Ozarska B, Fergusson M, Vinden P (2018a) Comparison of two dye uptake measurement methods for dyed wood veneer assessment. Eur J Wood Prod 76(6):1757–1759. https://doi.org/10.1007/s00107-018-1344-6CrossRef

Nguyen NB, Ozarska B, Fergusson M, Vinden P (2018) Investigation into the optimal dyeing method for Bluegum (Eucalyptus globulus) veneer. Bioresources 13(3):6444–6464CrossRef

Nouemsi Soubgui E, Tene Fongang RT, Kamseu E, Oum Lissouck R, Andreola F, Boubakar L et al (2021) Microstructure and physico-chemical transformation of some common woods from Cameroon during drying. J Therm Anal Calorim 145(6):3003–3018. https://doi.org/10.1007/s10973-020-09890-7CrossRef

Rowell RM (2012) Handbook of wood chemistry and wood composites. CRC Press, Boca Raton

Ryan TP (2007) Modern experimental design. John Wiley & Sons Inc, New YorkCrossRef

Singh V, Soni A, Singh R (2016) Process optimization studies of malachite green dye adsorption onto eucalyptus (Eucalyptus globulus) wood biochar using response surface methodology. Orient J Chem 32(5):2621–2631. https://doi.org/10.13005/ojc/320534CrossRef

Song X, Shen Y (2009) Dyeing with the reactive dyes. China Textile Press, Beijing

Tang S (1990) Colorimetry. Beijing Institute of Technology Press, Beijing

Togue Kamga F (2018) Modeling adsorption mechanism of paraquat onto Ayous (Triplochiton scleroxylon) wood sawdust. Appl Water Sci 9(1):1. https://doi.org/10.1007/s13201-018-0879-3CrossRef

Vakhitova NA, Safonov VV (2003) Effect of chitosan on the efficiency of dyeing textiles with active dyes. Fibre Chem 35(1):27–28. https://doi.org/10.1023/A:1023819521538CrossRef

Wang X, Zhang Y, Yu Z, Qi C (2017) Properties of fast-growing poplar wood simultaneously treated with dye and flame retardant. Eur J Wood Prod 75(3):325–333. https://doi.org/10.1007/s00107-016-1142-yCrossRef

Wang C, Deng S, Lin J (2018a) Dyeing properties of Cunninghamia lanceolata wood with acid dye. J For Environ 38(1):111–117. https://doi.org/10.13324/j.cnki.jfcf.2018.01.018CrossRef

Wang X, Yu Z, Zhang Y, Qi C, Chang W-L (2018b) Evaluation of ultrasonic-assisted dyeing properties of fast-growing poplar wood treated by reactive dye based on grey system theory analysis. J Wood Sci 64(6):861–871. https://doi.org/10.1007/s10086-018-1768-yCrossRef

Witek-Krowiak A, Chojnacka K, Podstawczyk D, Dawiec A, Pokomeda K (2014) Application of response surface methodology and artificial neural network methods in modelling and optimization of biosorption process. Biores Technol 160:150–160. https://doi.org/10.1016/j.biortech.2014.01.021CrossRef

Wu SQ, Song XZ, Lei YF, Zhu MQ (2018) Characterizations and properties of torrefied Quercus Vriabilis cork. Wood Res 63(6):947–957

Yang L, Liu H, Cai Y, Wu Z (2019) A novel method of studying the collapsed cell of eucalyptus wood using X-ray CT scanning. Drying Technol 37(12):1597–1604. https://doi.org/10.1080/07373937.2018.1519572CrossRef

Yu Z, Zhao L, Li W (2002) Study on permeable mechanism with dyestuff during wood dyeing. J Beijing For Univ 24:79–82

Yuan S (2019) Study on the preparation technology and dyeing mechanism of wood imitation bamboo scrimber. PhD thesis, Nanjing Forestry University

Yusop MFM, Ahmad MA, Rosli NA, Manaf MEA (2021) Adsorption of cationic methylene blue dye using microwave-assisted activated carbon derived from acacia wood: optimization and batch studies. Arab J Chem 14(6):103122. https://doi.org/10.1016/j.arabjc.2021.103122CrossRef

Zhang Y, Yu Z, Wu X (2015) Comparison among parameters affecting vertical vacuum dyeing of Populus cathayana Rehd. For Products J 65(3–4):123–128. https://doi.org/10.13073/FPJ-D-14-00064CrossRef

Zhao G, Wang D, Li X, He L, Shi W, Zhao G et al (1993) The permeation process of dye liquor in wood. J Northeast For Univ 21(5):54–59

Zhu T, Sheng J, Chen J, Ren K, Wu Z, Wu H et al (2021) Staining of wood veneers with anti-UV property using the natural dye extracted from Dalbergia cohinchinensis. J Clean Prod 284:124770. https://doi.org/10.1016/j.jclepro.2020.124770CrossRef

Title: Response surface methodology approach for dyeing process optimization of Ayous (Triplochiton scleroxylon) wood with acid dye
Authors: Shiqian Wu
Limin Peng
Feng Fu
Yun Feng
Jinrong He
Huishan Wang
Publication date: 02-03-2023
Publisher: Springer Berlin Heidelberg
Published in: European Journal of Wood and Wood Products / Issue 4/2023
Print ISSN: 0018-3768
Electronic ISSN: 1436-736X
DOI: https://doi.org/10.1007/s00107-023-01939-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Wirtschaft"

Springer Professional "Technik"

Other articles of this Issue 4/2023

Matching method for mutated veneer sheet images using gray-level co-occurrence matrix features

Physico-mechanical and microstructural characteristics of Entandrophragma angolense (edinam) logging residues from different forest sites and their correlations

Experimental and theoretical analyses on the mechanical properties of prestressed glulam continuous beam joints

The durability of acetylated beech (Fagus sylvatica L.) laminated veneer lumber (LVL) against wood-destroying basidiomycetes

Non-audible acoustic emission characterization of Reticulitermes termites in pine wood

Evaluation of wood treated with Paraloid B72® and boric acid: thermal behavior, water absorption and mold resistance