Top

International Journal of Material Forming

Published in:

01-05-2024 | Original Research

Simulation and automation of aluminum panel shot peen forming

Authors: Vladislav Sushitskii, Pierre-Olivier Dubois, Hong Yan Miao, Martin Lévesque, Frédérick Gosselin

Published in: International Journal of Material Forming | Issue 3/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

We present a methodology for automated forming of metal plates into freeform shapes using shot peening. The methodology is based on a simulation software that computes the peening pattern and simulates the effect of its application. The pattern generation requires preliminary experimental characterization of the treatment. The treatment is applied by a shot peening robot. The program for the robot is generated automatically according to the peening pattern. We validate the methodology with a series of tests. Namely, we form nine aluminum plates into doubly curved shapes and we also shape model airplane wing skins. The article describes the complete workflow and the experimental results.

previous article Numerical simulation of 3D angle-interlock woven fabric forming and compression processes

next article Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Ramati S, Kennerknecht S, Levasseur G (1999) Single piece wing skin utilization via advanced peen forming technologies. Proceedings of the ICSP7, Warsaw

Merino J, Patzelt A, Steinacher A, Windisch M, Heinrich G, Forster R, Bauer C (2017) Ariane 6-tanks and structures for the new european launcher

Yan A-M, Klappka I (2008) Springback in stretch forming process of aeronautic panel production by finite element simulation. Int J Mater Forming 1:201–204. https://doi.org/10.1007/s12289-008-0026-z

Kurukuri S, Miroux A, Wisselink H, Van den Boogaard T (2011) Simulation of stretch forming with intermediate heat treatments of aircraft skins: A physically based modeling approach. Int J Mater Forming 4. https://doi.org/10.1007/s12289-010-1013-8

Russig C, Bambach M, Hirt G, Holtmann N (2014) Shot peen forming of fiber metal laminates on the example of glare (r). Int J Mater Forming 7. https://doi.org/10.1007/s12289-013-1137-8

Wüstefeld F, Linnemann W, Kittel S (2006) Towards peen forming process automation. Shot Peening, 44

Miao HY, Faucheux PA, levesque M, Gosselin F (2021) Residual stress measurements of conventional and stress peen formed 2024-T3 aluminum sheets. engrXiv. https://doi.org/10.31224/osf.io/c5t9r

Friese A (2006) Ksa develops new automated peen forming for wing skins. Shot Peener Magazine 16

Chen Z, Yang F, Meguid S (2014) Realistic finite element simulations of arc-height development in shot-peened almen strips. J Eng Mater Technol 136:041002. https://doi.org/10.1115/1.4028006

10.

Mura T (1987) Micromechanics of defects in solids. vol. 3. Springer Sci & Business Media 580:21

11.

Korsunsky A (2005) The modelling of residual stresses due to surface peening using eigenstrain distributions. J Strain Anal Eng Design 40:817–824. https://doi.org/10.1243/030932405X30984

12.

Faucheux PA, Gosselin FP (2018) Lévesque M: Simulating shot peen forming with eigenstrains. J Mater Process Technol 254:135–144. https://doi.org/10.1016/j.jmatprotec.2017.11.036

13.

Korsunsky A (2006) Residual elastic strain due to laser shock peening: Modelling by eigenstrain distribution. J Strain Anal Eng Design 41:195–204. https://doi.org/10.1243/03093247JSA141

14.

Siguerdidjane W, Khameneifar F, Gosselin FP (2020) Efficient planning of peen-forming patterns via artificial neural networks. Manufact Lett 25:70–74. https://doi.org/10.1016/j.mfglet.2020.08.001

15.

van Rees WM, Matsumoto EA, Gladman AS, Lewis JA (2018) Mahadevan L: Mechanics of biomimetic 4d printed structures. Soft Matter 14(43):8771–8779. https://doi.org/10.1039/C8SM00990B

16.

Sushitskii V, van Rees WM, Levesque M, Gosselin FP (2022) Determination of optimal shot peen forming patterns using the theory of non-Euclidean plates. J Manufact Sci Eng 145(3). https://doi.org/10.1115/1.4056072

17.

Kang X, Wang T, Platts J (2010) Multiple impact modelling for shot peening and peen forming. Proceedings of the Institution of Mechanical Engineers, Part B: J Eng Manufact 224:689–697. https://doi.org/10.1243/09544054JEM1672

18.

Fitzpatrick ME, Fry AT (2005) Holdway P, Kandil F, Shackleton J. Determination of residual stresses by x-ray diffraction, Suominen L

19.

Zhang S, Venter A, Vorster W, Korsunsky A (2008) High-energy synchrotron x-ray analysis of residual plastic strains induced in shot-peened steel plates. J Strain Anal Eng Design 43(4):229–241. https://doi.org/10.1243/03093247JSA341

20.

Levers A, Prior A (1998) Finite element analysis of shot peening. J Mater Process Technol 80–1:304–308. https://doi.org/10.1016/S0924-0136(98)00188-5

21.

Wang T, Platts MJ, Levers A (2006) A process model for shot peen forming. J Mater Process Technol 172:159–162. https://doi.org/10.1016/j.jmatprotec.2005.09.006

22.

Prime MB (2017) Amplified effect of mild plastic anisotropy on residual stress and strain anisotropy. Int J Solids Structures 118-119:70–77. https://doi.org/10.1016/j.ijsolstr.2017.04.022

23.

Barnwal VK, Tewari A, Narasimhan K, Mishra SK (2016) Effect of plastic anisotropy on forming behavior of aa-6061 aluminum alloy sheet. The Journal of Strain Analysis for Engineering Design 51(7):507–517. https://doi.org/10.1177/0309324716655727

24.

Bron F, Besson J (2004) A yield function for anisotropic materials application to aluminum alloys. Int J Plasticity 20:937–963. https://doi.org/10.1016/j.ijplas.2003.06.001

25.

Faucheux PA (2019) Simulating shot peen forming with eigenstrains. PhD thesis, Polytechnique Montreal (December 2019)

26.

Miao HY, levesque M, Gosselin F (2021) Peen forming and stress peen forming of 2024-T3 aluminum sheets. Part 2: eigenstrain analysis. engrXiv. https://doi.org/10.31224/osf.io/kwbj6

27.

Han K, Owen D, Peric D (2002) Combined finite/discrete element and explicit/implicit simulations of peen forming process. Eng Computations. https://doi.org/10.1108/02644400210413667

28.

VanLuchene R, Cramer E (1996) Numerical modeling of a wing skin peen forming process. J Mater Eng Performance 5(6):753–760. https://doi.org/10.1007/BF02646910

29.

Miao HY, Lévesque M, Gosselin FP (2022) Shot peen forming pattern optimization to achieve cylindrical and saddle target shapes: The inverse problem. CIRP J Manufac Sci Technol 36:67–77. https://doi.org/10.1016/j.cirpj.2021.11.003

30.

van Rees WM (2017) Vouga E, Mahadevan L: Growth patterns for shape-shifting elastic bilayers. Proceedings of the National Academy of Sciences 114(44):11597–11602. https://doi.org/10.1073/pnas.1709025114

31.

Ciarlet PG (2005) An introduction to differential geometry with applications to elasticity. J Elasticity 78(1):1–215. https://doi.org/10.1007/s10659-005-4738-8

32.

O’neill B (2006) Elementary Differential Geometry. Elsevier, Academic Press

33.

Do Carmo MP (2016) Differential Geometry of Curves and Surfaces: Revised and Updated Second Edition. Courier Dover Publications, New York

34.

Liu DC (1989) Nocedal J: On the limited memory bfgs method for large scale optimization. Math Program 45(1):503–528. https://doi.org/10.1007/BF01589116

35.

Tamstorf R, Grinspun E (2013) Discrete bending forces and their jacobians. Graphical Models 75:362–370. https://doi.org/10.1016/j.gmod.2013.07.001

36.

Lévy B, Petitjean S, Ray N, Maillot J (2002) Least squares conformal maps for automatic texture atlas generation. ACM Trans Graph (TOG) 21(3):362–371

37.

Garg G, Kuts V, Anbarjafari G (2021) Digital twin for fanuc robots: Industrial robot programming and simulation using virtual reality. Sustainability 13:10336. https://doi.org/10.3390/su131810336CrossRef

38.

Rockafellar RT, Wets RJ-B (2009) Variational Analysis vol. 317. Springer, Berlin, Heidelberg

39.

Umeyama S (1991) Least-squares estimation of transformation parameters between two point patterns. IEEE Trans Pattern Anal Mach Intell 13(4):376–380. https://doi.org/10.1109/34.88573

40.

Test strip, holder, and gage for shot peening. Standard SAE J442, SAE International (2009)

41.

Kirk D (2018) The curvature of peened almen strips and its applications. Shot Peener Mag 32(4)

42.

Li H, Lu Y, Han Z, Guo X, Xu Y, Xu X, Tao J (2019) The shot peen forming of fiber metal laminates based on the aluminum-lithium alloy: Deformation characteristics. Composites Part B: Eng 158:279–285. https://doi.org/10.1016/j.compositesb.2018.09.085CrossRef

43.

Kirk D (1999) Shot peening. Aircraft engineering and aerospace technology

44.

Moran J (2003) An Introduction to Theoretical and Computational Aerodynamics. Courier Corporation, New York

45.

Wang M, Zeng Y, Bai X, Huang X (2017) Shot peen forming on aluminum alloy saddle shape integral panels with stiffeners. Proceedings of the ICSP-13, Montreal

46.

Chaise T, Li J, Nélias D, Kubler R, Taheri S, Douchet G, Robin V (2012) Gilles P Modelling of multiple impacts for the prediction of distortions and residual stresses induced by ultrasonic shot peening (usp). J Mater Process Technol 212(10):2080–2090. https://doi.org/10.1016/j.jmatprotec.2012.05.005CrossRef

Title: Simulation and automation of aluminum panel shot peen forming
Authors: Vladislav Sushitskii
Pierre-Olivier Dubois
Hong Yan Miao
Martin Lévesque
Frédérick Gosselin
Publication date: 01-05-2024
Publisher: Springer Paris
Published in: International Journal of Material Forming / Issue 3/2024
Print ISSN: 1960-6206
Electronic ISSN: 1960-6214
DOI: https://doi.org/10.1007/s12289-024-01826-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2024

Numerical simulation of friction extrusion: process characteristics and material deformation due to friction

Uncertainties on the mechanical behaviour of bronze sheets: influence on the failure in bending

Investigation on the forming process of polylactic acid in material extrusion additive manufacturing technique

Determination of the onset of yielding and the Young’s modulus after a change in the loading direction

Anisotropic plasticity deformation during micro-deep drawing of 304 foils: An experimental and numerical investigation

Rotary compression test for determination of critical value of hybrid damage criterion for railway steel EA1T

Premium Partners