Skip to main content
Top
Published in: Tribology Letters 3/2012

01-12-2012 | Original Paper

Sliding Wear Behaviour of Nanocrystalline Fe88Si12 Alloy Under Low Load and Speed

Authors: Licai Fu, Jun Yang, Qinling Bi, Hongbo Zeng, Weimin Liu

Published in: Tribology Letters | Issue 3/2012

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Sliding wear behaviour of nanocrystalline Fe88Si12 alloys with different grain sizes has been investigated under low load and speed. The friction coefficient of the Fe88Si12 alloy changes slightly with the grain size, but the wear resistance improves as the grain size decreases. The reduction of the grain size of the Fe88Si12 alloy not only results in the hardness increase, but also is beneficial to form Fe2SiO4 film on the worn surface. The Fe2SiO4 layer can form on the worn surface of the Fe88Si12 alloy even under smaller applied load when the grain size decreases.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Meyers, M.A., Mishra, A., Benson, D.: Mechanical properties of nanocrystalline materials. Prog. Mater. Sci. 51, 427–556 (2006)CrossRef Meyers, M.A., Mishra, A., Benson, D.: Mechanical properties of nanocrystalline materials. Prog. Mater. Sci. 51, 427–556 (2006)CrossRef
2.
go back to reference Jeong, D.H., Gonzalez, F., Palumbo, G., Aust, K.T., Erb, U.: The effect of grain size on the wear properties of electrodeposited nanocrystalline nickel coatings. Scripta Mater. 44, 493–499 (2001)CrossRef Jeong, D.H., Gonzalez, F., Palumbo, G., Aust, K.T., Erb, U.: The effect of grain size on the wear properties of electrodeposited nanocrystalline nickel coatings. Scripta Mater. 44, 493–499 (2001)CrossRef
3.
go back to reference Sriraman, K.R., Raman, S., Seshadri, S.K.: Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline Ni–W alloys. Mater. Sci. Eng. A 418, 303–311 (2006)CrossRef Sriraman, K.R., Raman, S., Seshadri, S.K.: Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline Ni–W alloys. Mater. Sci. Eng. A 418, 303–311 (2006)CrossRef
4.
go back to reference Wang, L., Ma, J., Yang, J., Bi, Q., Fu, L., Liu, W.: Dry-sliding tribological properties of a nano-eutectic Fe1.87C0.13 alloy. Wear 268, 991–995 (2010)CrossRef Wang, L., Ma, J., Yang, J., Bi, Q., Fu, L., Liu, W.: Dry-sliding tribological properties of a nano-eutectic Fe1.87C0.13 alloy. Wear 268, 991–995 (2010)CrossRef
5.
go back to reference Yang, J., Ma, J., Bi, Q., Liu, W., Xun, Q.: Tribological properties of Fe3Al material under water environment. Mater. Sci. Eng. A 490, 90–94 (2008)CrossRef Yang, J., Ma, J., Bi, Q., Liu, W., Xun, Q.: Tribological properties of Fe3Al material under water environment. Mater. Sci. Eng. A 490, 90–94 (2008)CrossRef
6.
go back to reference Rupert, T., Schuh, C.: Sliding wear of nanocrystalline Ni–W: structural evolution and the apparent breakdown of Archard scaling. Acta Mater. 58, 4137–4148 (2010)CrossRef Rupert, T., Schuh, C.: Sliding wear of nanocrystalline Ni–W: structural evolution and the apparent breakdown of Archard scaling. Acta Mater. 58, 4137–4148 (2010)CrossRef
7.
go back to reference Archard, J.F.: Contact and rubbing of flat surfaces. J. Appl. Phys. 24, 981–988 (1953)CrossRef Archard, J.F.: Contact and rubbing of flat surfaces. J. Appl. Phys. 24, 981–988 (1953)CrossRef
8.
go back to reference Zhang, Y.S., Han, Z., Wang, K., Lu, K.: Friction and wear behaviors of nanocrystalline surface layer of pure copper. Wear 260, 942–948 (2006)CrossRef Zhang, Y.S., Han, Z., Wang, K., Lu, K.: Friction and wear behaviors of nanocrystalline surface layer of pure copper. Wear 260, 942–948 (2006)CrossRef
9.
go back to reference Sun, H.Q., Shi, Y.N., Zhang, M.: Sliding wear-induced microstructure evolution of nanocrystalline and coarse-grained AZ91D Mg alloy. Wear 266, 666–670 (2009)CrossRef Sun, H.Q., Shi, Y.N., Zhang, M.: Sliding wear-induced microstructure evolution of nanocrystalline and coarse-grained AZ91D Mg alloy. Wear 266, 666–670 (2009)CrossRef
10.
go back to reference Henry, S.: Friction, Lubrication, and Wear Technology. ASM Handbook, Materials Park (1992) Henry, S.: Friction, Lubrication, and Wear Technology. ASM Handbook, Materials Park (1992)
11.
go back to reference Myung, J., Lim, H., Kang, S.: Oxidation behavior of nanocrystalline Al alloys containing 5 and 10 at.% Ti. Oxid. Met. 51, 79–85 (1999)CrossRef Myung, J., Lim, H., Kang, S.: Oxidation behavior of nanocrystalline Al alloys containing 5 and 10 at.% Ti. Oxid. Met. 51, 79–85 (1999)CrossRef
12.
go back to reference Han, Z., Lu, L., Zhang, H.W., Yang, Z.Q., Wang, F.H., Lu, K.: Comparison of the oxidation behavior of nanocrystalline and coarse-grain copper. Oxid. Met. 63, 261–275 (2005)CrossRef Han, Z., Lu, L., Zhang, H.W., Yang, Z.Q., Wang, F.H., Lu, K.: Comparison of the oxidation behavior of nanocrystalline and coarse-grain copper. Oxid. Met. 63, 261–275 (2005)CrossRef
13.
go back to reference Ma, G., Xu, B., Wang, H., Si, H., Yang, D.: Effect of surface nanocrystallization on the tribological properties of 1Cr18Ni9Ti stainless steel. Mater. Lett. 65, 1268–1271 (2011)CrossRef Ma, G., Xu, B., Wang, H., Si, H., Yang, D.: Effect of surface nanocrystallization on the tribological properties of 1Cr18Ni9Ti stainless steel. Mater. Lett. 65, 1268–1271 (2011)CrossRef
14.
go back to reference Fu, L., Yang, J., Bi, Q., Ma, J., Liu, W.: Combustion synthesis and characterization of bulk nanocrystalline Fe88Si12 alloy. IEEE Trans. Nanotechnol. 9, 218–222 (2010)CrossRef Fu, L., Yang, J., Bi, Q., Ma, J., Liu, W.: Combustion synthesis and characterization of bulk nanocrystalline Fe88Si12 alloy. IEEE Trans. Nanotechnol. 9, 218–222 (2010)CrossRef
15.
16.
go back to reference Kragel’skii, I.V., Silin, A.: The design of low-wear friction materials. Mech. Compos. Mater. 5, 245–248 (1969) Kragel’skii, I.V., Silin, A.: The design of low-wear friction materials. Mech. Compos. Mater. 5, 245–248 (1969)
17.
go back to reference Toru, Y., Peter, H.: Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials. Appl. Surf. Sci. 254, 2441–2449 (2008)CrossRef Toru, Y., Peter, H.: Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials. Appl. Surf. Sci. 254, 2441–2449 (2008)CrossRef
18.
go back to reference Aghdam, A.B., Khonsari, M.M.: On the correlation between wear and entropy in dry sliding contact. Wear 270, 781–790 (2011)CrossRef Aghdam, A.B., Khonsari, M.M.: On the correlation between wear and entropy in dry sliding contact. Wear 270, 781–790 (2011)CrossRef
19.
go back to reference Lashin, A., Schneeweiss, O., Houbaert, Y.: Effect of ambient air pressure on the oxidation kinetics of Fe-6 at.% Si alloy. Corros. Sci. 50, 2580–2587 (2008)CrossRef Lashin, A., Schneeweiss, O., Houbaert, Y.: Effect of ambient air pressure on the oxidation kinetics of Fe-6 at.% Si alloy. Corros. Sci. 50, 2580–2587 (2008)CrossRef
20.
go back to reference Palumbo, G., Aust, K.T.: Structure-dependence of intergranular corrosion in high purity nickel. Acta Met. Mater. 24, 2343–2352 (1990)CrossRef Palumbo, G., Aust, K.T.: Structure-dependence of intergranular corrosion in high purity nickel. Acta Met. Mater. 24, 2343–2352 (1990)CrossRef
21.
go back to reference Wolff, U., Schneider, F., Mummert, K., Schultz, L.: Stability and electrochemical properties of passive layers on Fe–Si alloys. Corrosion 56, 1195–1201 (2000)CrossRef Wolff, U., Schneider, F., Mummert, K., Schultz, L.: Stability and electrochemical properties of passive layers on Fe–Si alloys. Corrosion 56, 1195–1201 (2000)CrossRef
22.
go back to reference Koch, C.C., Ovidko, I.A., Seal, S., Veprek, S.: Structural Nanocrystalline Materials. Fundamentals and Applications. Cambridge University Press, New York (2007)CrossRef Koch, C.C., Ovidko, I.A., Seal, S., Veprek, S.: Structural Nanocrystalline Materials. Fundamentals and Applications. Cambridge University Press, New York (2007)CrossRef
23.
go back to reference Lejcek, P., Schneeweiss, O., Fraczkiewicz, A.: Grain boundary segregation in an ordered Fe-24 at.% Si alloy. Surf. Sci. 566–568, 826–831 (2004)CrossRef Lejcek, P., Schneeweiss, O., Fraczkiewicz, A.: Grain boundary segregation in an ordered Fe-24 at.% Si alloy. Surf. Sci. 566–568, 826–831 (2004)CrossRef
Metadata
Title
Sliding Wear Behaviour of Nanocrystalline Fe88Si12 Alloy Under Low Load and Speed
Authors
Licai Fu
Jun Yang
Qinling Bi
Hongbo Zeng
Weimin Liu
Publication date
01-12-2012
Publisher
Springer US
Published in
Tribology Letters / Issue 3/2012
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI
https://doi.org/10.1007/s11249-012-0028-3

Other articles of this Issue 3/2012

Tribology Letters 3/2012 Go to the issue

Premium Partners