Sorption of uranyl and arsenate on SiO₂, Al₂O₃, TiO₂ and FeOOH

Migration of uranium and arsenic in aquatic environments is often controlled by sorption on minerals present along the water flow path. To investigate the sorption behaviour, batch experiments were conducted for uranium and arsenic as single components and also solutions containing both uranium and arsenic in the presence of SiO₂, Al₂O₃, TiO₂ and FeOOH at a pH ranging from 3 to 9. In solutions containing only U(VI) or As(V) with the minerals, the sorption of U(VI) was low at acidic pH range and increases with increasing pH, whereas As(V) showed opposite sorption behaviour to Al₂O₃, TiO₂ and FeOOH from acidic pH range to alkaline condition. For the As(V)–SiO₂ system, the sorption was low for almost all pH. Sorption of U(VI) and As(V) on SiO₂ and FeOOH is almost similar in solutions containing either U(VI) or As(V) separately, or both together. In the U(VI)–As(V)–Al₂O₃ system, a significant retardation in uranyl sorption and an enhancement in arsenate sorption on Al₂O₃ were observed for a wide range of pH. The sorption behaviour of U(VI) and As(V) was changed when Al₂O₃ was replaced by TiO₂, where an increase in sorption was observed for both elements. The sorption behaviour of uranyl and arsenate in the U(VI)–As(V)–TiO₂ system gives evidence for the formation of uranyl–arsenate complexes. The change in sorption retardation/enhancement of U(VI) and As(V) could be explained by the formation of uranyl–arsenate complexes or due to the competitive sorption between uranyl and arsenate species.