Top

International Journal of Steel Structures

Published in:

03-05-2018

Static Experiment on Mechanical Behavior of Innovative Flat Steel Plate-Concrete Composite Slabs

Authors: Yong Yang, Ruyue Liu, Xudong Huo, Xianwei Zhou, Charles W. Roeder

Published in: International Journal of Steel Structures | Issue 2/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A new type of composite slab is introduced in this paper, which is composed of normal flat steel plates and concrete slabs, connected and interacted by perfobond shear connectors (PBL shear connectors). Experiments on six specimens of this type of composite slab, loaded at two symmetric two-points, were described in this paper to get mechanical behaviors under bending moments. During the experiments, the crack patterns, failure modes, failure mechanism and ultimate bending capacity of specimens with composite slab were investigated, and the strains of concrete and flat steel plates were also measured and recorded in order to obtain the moment action. From the experimental results, it was found that composite interaction between the steel plate and the concrete fully developed, and such composite slab was verified to have good mechanical performance with high bending capacity, substantial flexural rigidity and good ductility. Plane section assumption was also verified and moreover, a design approach including calculation methods of bending capacity and flexural rigidity was established and proposed based on the experimental results, and the calculation methods were also verified and revised on the basis of comparisons of the calculated results and experimental results. Results from this paper provide references for the application of this new type composite slab.

previous article Post-fire Behavior of Welded Hollow Spherical Joints Subjected to Eccentric Loads

next article Experimental Investigation of T-Stub Link-to-Column Connections in Eccentrically Braced Frames

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Allahyari, H., Dehestani, M., Beygi, M. H., Neya, B. W., & Rahmani, E. (2014). Mechanical behavior of steel-concrete composite decks with perfobond shear connectors. Steel and Composite Structures, 17(3), 339–358.CrossRef

Egilmez, O. O., Helwig, T. A., Jetann, C. A., & Lowery, R. (2007). Stiffness and strength of metal bridge deck forms. Journal of Bridge Engineering, 12(4), 429–437.CrossRef

Hu X. L., Lin Y., & Wang Q. Y. (2013). Experimental analysis of perfonbond shear connection between steel and pre-stressed concrete. In The 2013 world congress on advances in structural engineering and mechanics (pp. 190–198). Jeju, Korea.

Johnson, R. P. (2004). Prediction of shear resistance of headed studs in troughs of profiled sheeting. Oxford: Blackwell Pub.

Johnson R. P. (2011). Composite structures of steel and concrete: beams, slabs, columns, and frames for buildings. Composite Construction in Steel and Concrete VI, pp. 1–13.

Kozioł, P. (2015). Modern design of steel-concrete composite structures. Modern design of steel-concrete composite structures, 21(171), 118–127.

Leon, R. T. (2004). Composite construction in steel and concrete V. In Proceedings of the 5th international conference, July 18–23, Kruger National Park, Berg-en-Dal, Mpumalanga, South Africa.

Leon, R. T. (2008). Composite construction in steel and concrete VI. In Proceedings of the 2008 composite construction in steel and concrete conference, July 20–24, Tabernash, Colorado.

Li, S. Q., Wan, S., & Chen, J. B. (2009). Test study of a new type of shear connector. International Journal of Bridge Construction, 2009(04), 17–19.

Nie, J. G., Yi, W. H. J., & Lei, L. Y. (2003). Rigidity calculation of closed profiled sheeting-concrete composite slabs. Industrial Construction, 33(12), 19–21.

Nishiumi, K., & Okimoto, M. (1999). Shear strength of perfobond rib shear connector under the confinement. International Journal of Japanese Society of Civil Engineering, 633, 193–203.

Oehlers, D. J., & Bradford, M. A. (1995). composite steel and concrete structural members-fundamental behavior. Pergamon, Oxford: Elsevier Science.

Papastergiou, D., & Lebet, J. P. (2014). Investigation of a new steel-concrete connection for composite bridges. Steel and Composite Structures, 17(5), 573–599.CrossRef

Rackham, J. W., Couchman, G. H., & Hicks, S. J. (2009). Composite slabs and beams using steel decking: Best practice for design and construction. UK: Steel Construction Institute.

Ren, J. (2006). Experimental study on fatigue behaviors of steel-concrete composite structures. Master. Dissertation, Southwest Jiaotong University, China. (in Chinese).

Uy, B., & Bradford, M. A. (1994). Inelastic local buckling behavior of thin steel plates in profiled composite beams. The Structural Engineer, 72(16), 259–267.

Wang, W. A., Li, Q., Zhao, C. H., & Zhuang, W. L. (2014). Experimental study on bearing capacity of PBL shear connector group in hybrid structures. China Civil Engineering Journal, 47(6), 109–117. (in Chinese).

Wen, X., Ye, J. S., Gai, X. M., & Cai, C. S. (2013). Mechanical performance and design optimization of rib-stiffened super-wide bridge deck with twin box girders in concrete. Structural Engineering and Mechanics, 48(3), 395–414.CrossRef

Wu, H., & Hosain, M. U. (2002).Composite beams with parallel wide ribbed metal deck. Composite Construction in Steel and Concrete VI, pp. 415–425.

Yang, Y., & Huo, X. D. (2011). Experimental study on fatigue behavior of steel plate-concrete composite bridge decks. Engineering Mechanics, 28(8), 37–45. (in Chinese).

Yang, Y., Liu, J. B., Fan, J. S., & Nie, X. (2013). Experimental study on flexural capacity of steel plate-concrete composite slabs. Journal of Building Structures, 34(10), 24–31. (in Chinese).

Yang, Y., Yu, Y. L., Zhou, X. W., Roeder, C. W., & Huo, X. D. (2016). Study on mechanism performance of composite beam with innovative composite slabs. Steel and Composite Structures, 21(3), 537–551.CrossRef

Yang, Y., Zhou, X. W., Xue, J. Y., & Huo, X. D. (2012). Experimental study on fatigue behavior of composite girders with steel plate-concrete composite decks. China Civil Engineering Journal, 45(6), 135–141. (in Chinese).

Yang, Y., Zhu, G., Zhou, P. J., Nie, J. G., et al. (2009). Experimental study on the mechanical behavior and design method of plane steel-plate and concrete composite bridge decks. China Civil Engineering Journal, 42(12), 135–141. (in Chinese).

Yeol, H., & Jeong, Y. J. (2006). Experimental investigation on behavior of steel–concrete composite bridge decks with perfobond ribs. Journal of Construction Steel Research, 62(5), 463–471.MathSciNetCrossRef

Zhan, Y. L., & Zhao, R. D. (2006). Experimental study and theoretical analysis on steel-concrete composite bridge decks. Journal of Southwest Jiaotong University, 41(3), 360–365. (in Chinese).

Title: Static Experiment on Mechanical Behavior of Innovative Flat Steel Plate-Concrete Composite Slabs
Authors: Yong Yang
Ruyue Liu
Xudong Huo
Xianwei Zhou
Charles W. Roeder
Publication date: 03-05-2018
Publisher: Korean Society of Steel Construction
Published in: International Journal of Steel Structures / Issue 2/2018
Print ISSN: 1598-2351
Electronic ISSN: 2093-6311
DOI: https://doi.org/10.1007/s13296-018-0012-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2018

Experimental and Numerical Study on Buckling Behavior of a Rigidly Stiffened Plate with Tee Ribs

Multi-Index Seismic Capacity Evaluation of Buckling-Restrained Braced Frames

Analysis and Design of Elliptical Concrete-Filled Thin-Walled Steel Stub Columns Under Axial Compression

FEM and Experimental Study on Mechanical Property of Integrated Container Building

Experimental Investigation of Aluminum Alloy and Steel Core Buckling Restrained Braces (BRBs)

Study on Dynamic Behavior of Single-Layer Reticulated Dome by Shaking Table Test

Premium Partners