Skip to main content
Top

2015 | OriginalPaper | Chapter

Stripping Performance and Volumetric Properties Evaluation of Hot Mix Asphalt (HMA) Mix Design Using Natural Rubber Latex Polymer Modified Binder (NRMB)

Authors : E. Shaffie, J. Ahmad, A. K. Arshad, D. Kamarun, F. Kamaruddin

Published in: InCIEC 2014

Publisher: Springer Singapore

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Striping one of the most common pavement failure usually occurs in pavement structures. This failure reduced the service life of the pavement, reduced driver safety and increase cost of maintenance. Polymer modified binder has been conducted previously to find an alternative material in pavement construction that can be used as new improvement for asphalt mix design. This paper presents the stripping potential benefits of natural rubber (NR) for the asphalt mixtures used on pavement. This research evaluates the physical properties and stripping performance of dense graded Superpave-designed HMA mix. Two different types of dense graded Superpave HMA mix were developed consists of unmodified binder asphalt mix (UMB) and natural rubber polymer modified binder asphalt mix (NRMB). Natural rubber polymer modified binder was prepared from addition of 8 % of NR into asphalt binder. Stripping results from Modified Lottman test and Boiling Water test were determined to evaluate the performance of these mixtures. Results showed that all the mixes passed the Superpave volumetric properties criteria which indicate that these mixtures were good with respect to durability and flexibility. The Stripping result of NPMB demonstrates better resistance to stripping than those prepared using UMB mix. Addition of NR to the binder has certainly improved the binder properties significantly and hence increase the resistant to stripping of the asphalt mixture. The results also shows that the optimum NR obtained is 8 % by weight of asphalt binder is the most effective proportion that having potential to improve physical properties and the performance of polymer modified asphalt binder. Therefore, it can be concluded that the NR polymer is suitable to be used as a modifier to modified binder in order to enhance the properties of the binder and thus improves the performance of asphalt mixes.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference T. Kennedy, F. Roberts, K. Lee, in Evaluating Moisture Susceptibility of Asphalt Mixtures Using the Texas Boiling Test, Transportation Research Record 968, TRB, National Research Council, Washington, D.C., pp. 45–54, (1984) T. Kennedy, F. Roberts, K. Lee, in Evaluating Moisture Susceptibility of Asphalt Mixtures Using the Texas Boiling Test, Transportation Research Record 968, TRB, National Research Council, Washington, D.C., pp. 45–54, (1984)
2.
go back to reference F. Roberts, P. Kandhal, E. Brown, D. Lee, T. Kennedy, in Hot Mix Asphalt Materials Mixture Design and Construction, 2nd edn. (NAPA Education Foundation, Lanham, Maryland, 1996) F. Roberts, P. Kandhal, E. Brown, D. Lee, T. Kennedy, in Hot Mix Asphalt Materials Mixture Design and Construction, 2nd edn. (NAPA Education Foundation, Lanham, Maryland, 1996)
3.
go back to reference G. Polacco, Rheological properties of asphalt/SBS/clay blends. Eur. Polymer J. 44(11), 3512–3521 (2008)CrossRef G. Polacco, Rheological properties of asphalt/SBS/clay blends. Eur. Polymer J. 44(11), 3512–3521 (2008)CrossRef
4.
go back to reference M.J. Fernando, M. Nadarajah, in Use of Natural Rubber Latex in Road Construction, Polymer Modified Asphalt Binders, ASTM STP 1108, ed by. K. R. Wardlaw, S. Shuler (American Society for Testing and Material, Philadelphia, 1992) M.J. Fernando, M. Nadarajah, in Use of Natural Rubber Latex in Road Construction, Polymer Modified Asphalt Binders, ASTM STP 1108, ed by. K. R. Wardlaw, S. Shuler (American Society for Testing and Material, Philadelphia, 1992)
5.
go back to reference V. Nopparat, P. Jaratsri, N. Nuchanat, Modification of asphalt cement by natural rubber for pavement construction, Rubber Thai J. 1, 32–39, (2012). Journal home page: www.rubberthai.com V. Nopparat, P. Jaratsri, N. Nuchanat, Modification of asphalt cement by natural rubber for pavement construction, Rubber Thai J. 1, 32–39, (2012). Journal home page: www.​rubberthai.​com
6.
go back to reference T. Nrachai, P. Chayatan, L. Direk, The modification of asphalt with natural rubber latex. Proc. Eastern Asia Soc. Transp. Stud. 5, 679–694 (2005) T. Nrachai, P. Chayatan, L. Direk, The modification of asphalt with natural rubber latex. Proc. Eastern Asia Soc. Transp. Stud. 5, 679–694 (2005)
7.
go back to reference G.D. Airey, Rheological evaluation of ethylene vinyl acetate polymer modified bitumen. J. Constr. Build. Mater. 16, 473–487 (2002) G.D. Airey, Rheological evaluation of ethylene vinyl acetate polymer modified bitumen. J. Constr. Build. Mater. 16, 473–487 (2002)
8.
go back to reference E. Shaffie, J. Ahmad, K. Arshad, D. Kamarun, A. Shafie, Effect of blending interaction on physical properties of natural rubber latex (NRL) modified asphalt binder, National Postgraduate Seminar, (2013) E. Shaffie, J. Ahmad, K. Arshad, D. Kamarun, A. Shafie, Effect of blending interaction on physical properties of natural rubber latex (NRL) modified asphalt binder, National Postgraduate Seminar, (2013)
9.
go back to reference R.B. McGennis, R.M. Anderson, T.W. Kennedy, M. Solaimanian, in Background of SUPERPAVE asphalt mixture design and analysis. Publication No. FHWA-SA-1995-003 R.B. McGennis, R.M. Anderson, T.W. Kennedy, M. Solaimanian, in Background of SUPERPAVE asphalt mixture design and analysis. Publication No. FHWA-SA-1995-003
10.
go back to reference R.P. Lottman, in Predicting Moisture-Induced Damage to Asphaltic Concrete. TRB, National Research Council, Washington, D.C, NCHRP Report 192: (1978) R.P. Lottman, in Predicting Moisture-Induced Damage to Asphaltic Concrete. TRB, National Research Council, Washington, D.C, NCHRP Report 192: (1978)
Metadata
Title
Stripping Performance and Volumetric Properties Evaluation of Hot Mix Asphalt (HMA) Mix Design Using Natural Rubber Latex Polymer Modified Binder (NRMB)
Authors
E. Shaffie
J. Ahmad
A. K. Arshad
D. Kamarun
F. Kamaruddin
Copyright Year
2015
Publisher
Springer Singapore
DOI
https://doi.org/10.1007/978-981-287-290-6_76