Top

Strength of Materials

Published in:

01-11-2013

Study of the Effect of Water Intake by the Matrix on the Optimization of the Fiber Matrix Interface Damage for a Composite Material by Genetic Algorithms

Authors: H. Temimi Lahouari, M. Allel, N. Belkaid, A. Boutaous, R. Bouamrane

Published in: Strength of Materials | Issue 6/2013

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The objective of this paper is study the influence of the matrix swelling due to water on the damage of the fiber matrix interface of a composite material. The results obtained by a genetic approach based on Weibull probabilistic model, show good agreement between the simulation and the actual behavior of the two materials T300/914 and PEEK/APC2. Also the absorption of water by the matrix increases significantly the interface damage.

previous article Morphology and Mechanical Properties of PP/LLDPE Blends and Ternary PP/LLDPE/Nano-CaCO3 Composites

next article Study of the Effect of Different Industrial Coating with Microscale Thickness on the CK45 Steel by Experimental and Finite Element Methods

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

H. Aytac, J. Renard, and G. Verchery, “Mesure de l’endommagement dans les materiaux composites a matrice resine par absorption hydroscopique differentielle,” in: JNC 3 (Sept. 21–23, 1982, Paris), pp. 141–149.

J. Lemaitre and J. L. Chaboche, Mechanics of Solid Materials, Cambridge University Press (1994).

P. Ladevese and G. Lubineau, “Pont entre micro et meso mecaniques des composites stratifies,” Compos. Rendus Mecan., 331, 537–544 (2003).CrossRef

P. Ladevese and G. Lubineau, “On a damage mesomodel for laminates: micromechanics basis and improvement,” Mech. Mater., 35, 763–775 (2003).CrossRef

E. Brun, Vieillissement Hygrothermique d’un Composite Resine Epoxyde Silice et Impact sur sa Rigidite Dielectrique, These a l’Universite Joseph Fourier Grenoble I (2009).

G. Marque, Absorption de l’Eau par les Polymeres, These a l’Universite de Savoie (2009).

D. Bourega Ramoun, M. Djillali, L. Temimi, and A. Boutaous, “Contribution to the modeling of the thermoelastic behavior of composite materials,” Int. Rev. Phys., 6, No. 3, 254–260 (2012).

L. Temimi, D. Ramoun, N. Belkaid, and A. Boudghene Stambouli, “Study of the water intake by a damaged matrix composite subjected to a uniaxial compression,” Int. Rev. Phys., 2, No. 2, 49–55 (2012).

J. Gassan, “A study of fibre and interface parameters affecting the fatigue behaviour of natural fibre composites,” Composites: Part A, 33, 369–374 (2002).CrossRef

10.

R. Kahraman and M. Al-Harthi, “Moisture diffusion into aluminum powder filled epoxy adhesive in sodium chloride solutions,” Int. J. Adhes. Adhesiv., 25, No. 4, 337–341 (2005).CrossRef

11.

K. Derrien and P. Gilormini, “The effect of applied stresses on the equilibrium moisture content in polymer,” Sripta Mater., 56, No. 4, 297–299 (2007).CrossRef

12.

H. L. Cox, “The elasticity and strength of paper and other fibrous materials,” Brit. J. Appl. Phys., 12, 72–79 (1952).CrossRef

13.

A. Boutaous, B. Peseux, L. Gornet, and A. Belaidi, “A new modeling of plasticity coupled with the damage and identification for carbon fibre composites laminates,” Compos. Struct., 74, 1–9 (2006).CrossRef

14.

W. Weibull, “A statistical theory of the strength of materials,” Royal Swed. Acad. Eng. Sci. Proc., 151, 1–45 (1939).

15.

A. Boutaous, M. Elchikh, M. Abdelouahab, and A. Belaidi, “A computational strategy for the localization and fracture of laminated composites. Part 1. Development of a localization criterion adapted to model damage evolution time-delay,” Strength Mater., 43, No. 5, 519–525 (2011).CrossRef

16.

A. Boutaous, M. Elchikh, M. Abdelouahab, and A. Belaidi, “A computational strategy for the localization and fracture of laminated composites. Part 2. Life prediction by mesoscale modeling for composite structures,” Strength Mater., 43, No. 6, 645–653 (2011).CrossRef

Title: Study of the Effect of Water Intake by the Matrix on the Optimization of the Fiber Matrix Interface Damage for a Composite Material by Genetic Algorithms
Authors: H. Temimi Lahouari
M. Allel
N. Belkaid
A. Boutaous
R. Bouamrane
Publication date: 01-11-2013
Publisher: Springer US
Published in: Strength of Materials / Issue 6/2013
Print ISSN: 0039-2316
Electronic ISSN: 1573-9325
DOI: https://doi.org/10.1007/s11223-013-9509-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2013

A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars

Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density

Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 2. Studies on Flexural, Compression, and Impact Strength

Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading

Estimating the Generalized Exponential Distribution Parameters and the Acceleration Factor Under Constant-Stress Partially Accelerated Life Testing with Type-II Censoring

Orthotropic Material and Anisotropic Damage Mechanics Approach for Numerically Seismic Assessment of Arch Dam–Reservoir–Foundation System

Premium Partners