Top

Steel in Translation

Published in:

01-02-2023

Study of the Kinetics of the Flow of Epoxy Binders over the Surface of a Carbon Fiber with a Metal Coating

Authors: D. E. Grechushkina, V. A. Nelyub

Published in: Steel in Translation | Issue 2/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The results of experimental studies of kinetics of spreading processes of epoxy binders on the surface of a carbon (cloth) tape depending on a reinforcement pattern are presented. A copper coating of 100 nm thickness was deposited on reinforced materials by magnetron sputtering. It has been found out that a metal coating on the surface of a carbon tape and cloth leads to a considerable increase in the rate of spreading processes only for the laying-out pattern 0°, when binder movement in capillaries is provided. The deposition of a copper coating on the surface of the carbon tape and cloth has considerably the bigger influence on kinetics of the spreading processes, increasing it by 35%.

previous article Some Assessments for the Technical State of Metal Products and Determination of Their Safe Operation Periods Based on Criterion Control

next article The Influence of Conservative Compounds on the Service Life of Seasonal Equipment

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Baurova, N.I. and Zorin, V.A., Primenenie polimernykh kompozitsionnykh materialov pri proizvodstve i remonte mashin (Application of Composite Materials in Production and Repair of Machines), Moscow: Mosk. Avtodorozhnyi Inst., 2016.

Baurova, N.I. and Zorin, V.A., Tekhnologicheskaya nasledstvennost’ pri proizvodstve detalei iz polimernykh kompozitsionnykh materialov (Technological Inheritance at Production of Elements Made of Polymer Composite Materials), Moscow: Mosk. Avtodorozhnyi Inst., 2018.

Kalinchev, V.A. and Yagodnikov, D.A., Tekhnologiya proizvodstva raketnykh dvigatelei tverdogo topliva (Technology for Production of Solid-Fuel Rocket Engines), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2011.

Petrova, A.P. and Malysheva, G.V., Klei, kleevye svyazuyushchie i kleevye prepregi (Glue, Adhesive Bonds, and Adhesive Prepregs), Kablov, E.N., Ed., Moscow: Vseross. Inst. Aviats. Mater., 2017.

Kryzhanovskii, V.K., Kerber, M.L., Burlov, V.V., and Panimatchenko, A.D., Proizvodstvo izdelii iz polimernykh materialov (Fabrication of Products of Polymer Materials), St. Petersburg: Professiya, 2004.

Bazhenov, S.L., Berlin, A.A., Kul’kov, A.A., and Oshmyan, V.G., Polimernye kompozitsionnye materialy (Polymer Composite Materials), Dolgoprudnyi, Moscow oblast: Intellekt, 2010.

Berlin, E.V. and Seidman, L.A., Ionno-plazmennye protsessy v tonkoplenochnoi tekhnologii (Ionic-Plasma Processes in Thin-Film Technology), Moscow: Tekhnosfera, 2010.

Nelyub, V.A., Berlin, A.A., and Gorberg, B.L., Method of producing compositve material based on carbon fibers, RF Patent no. 2698809, 2019.

Nelyub, V.A., Assessment of mechanical characteristics of carbon tapes after drawing on their surface of metal coatings, Sovrem. Naukoemkie Tekhnol., 2019, no. 12-2, pp. 330–336.

10.

Babaevskii, P.G., Chalykh, A.E., Zhavoronok, E.S., and Sotnikova, E.F., Rheological properties of glycidyl ethers of bisphenol A, oligopropylentriol and their blends in initial state and in hardening process with using of diamine, Vestn. Mosk. Aviats. Inst., 2007, no. 12, pp. 39–43.

11.

Kolesnikova, E.F., Babaevskii, P.G., Zhavoronok, E.S., and Chalykh, A.E., Effect of thermodynamic state of diane and aliphatic epoxy oligomers on the temperature dependences of Newtonian liquid, Plast. Massy, 2009, no. 4, pp. 34–40.

Title: Study of the Kinetics of the Flow of Epoxy Binders over the Surface of a Carbon Fiber with a Metal Coating
Authors: D. E. Grechushkina
V. A. Nelyub
Publication date: 01-02-2023
Publisher: Pleiades Publishing
Published in: Steel in Translation / Issue 2/2023
Print ISSN: 0967-0912
Electronic ISSN: 1935-0988
DOI: https://doi.org/10.3103/S0967091223020079

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 2/2023

Elaboration of the Load-Equalization System of the Electric Drive of the Main Hoist of a Bridge Crane

Simulated and Experimental Study of Structure Formation upon Thermal Treatment of Steel 20Kh2G2SNMA

Some Assessments for the Technical State of Metal Products and Determination of Their Safe Operation Periods Based on Criterion Control

Phase Diagram of Fe–100% C Alloys. Part One. Basic Inconsistencies of Fe–Fe3C Alloy Phase Diagram

Repair of Parts of Road-Building Machines Operating in a Wet Environment

Study of the Influence of Finely Dispersed Powder Materials on the Properties of Protective Coatings for Agricultural Machines

Premium Partners