Top

Published in:

01-11-2023

Study of Wear Resistance of Mandrels upon Piercing Workpieces Made of Steel 20Kh13

Authors: A. A. Korsakov, D. V. Mikhalkin, A. V. Krasikov, A. S. Aleschenko, Yu. V. Gamin, A. I. Bannikov, Ya. A. Chemaeva, E. Yu. Mikhalkina

Published in: Steel in Translation | Issue 11/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The results of an experimental study regarding the influence of the material and calibration of the piercing mill mandrel on its wear resistance upon piercing workpieces made of steel 20Kh13 have been presented. To carry out the study, mandrels made of four grades of steel (4Kh5MFS, 5Kh3V3MFS, 20Kh2N4A, 3Kh3M3F) and two types of calibrations have been used: with a smooth working surface and a specially designed one that ensures fractional deformation in the source during piercing by applying a periodic variable profile to the working surface, representing longitudinal grooves. The effectiveness of using a mandrel with longitudinal recesses on the working surface to increase its durability is confirmed by the results of computer modeling using the finite element method in the QForm 2D/3D software product. The experimental study was carried out on a two-roll piercing screw rolling mill MISIS-130D with barrel-shaped rolls and a guide tool in the form of fixed rulers. The durability of the mandrel was assessed by visual inspection of the quality of the working surface and by determining the change in mass after each pass upon piercing workpieces made of steel 20Kh13. According to the results of the work, it was found that the wear of all types of mandrels is predominantly adhesive in nature (there are traces of metal adhesion and tearing out on the mandrels). The best results in terms of durability were shown by a mandrel made of steel 20Kh2N4A.

previous article Modern Methods Analysis of Longitudinally Welded Pipes Production in the Continuous Forming Mill TESA10-50 (Pipe Electrical Welding Unit) of the Different Types of Configurations

next article Determination of Optimal Parameters of Hot Die Forging of Piercing Mill Mandrel by Modeling in QForm Suite

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Korol’, A.V., Zvonarev, D.Yu., Kuryatnikov, A.V., Khudyakov, N.K., and Sapunov, S.Yu., Mandrel life in Disher piercing mill, Steel Transl., 2011, vol. 41, no. 2, pp. 143–146. https://doi.org/10.3103/S0967091211020100CrossRef

Sherkunov, V.G. and Korsakov, A.A., Influence of shape and size of the tip of the piercing mill mandrel on the formation of internal defects in shells and application of continuously cast billets for pipe diameters of less than 121 mm, Vestn. Yuzhno-Ural. Gos. Univ., Ser. Metall., 2015, vol. 15, no. 4, pp. 116–121. https://doi.org/10.14529/met150415CrossRef

Vavilkin, N.M., Belevich, A.V., Izotov, D.G., Bodrov, D.V., and Goncharov, V.S., Studying the thermostressed state of water-cooled piercing mills, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 2010, no. 9, pp. 35–38.

Chubukov, M.Yu., Rutskii, D.V., Zyuban, N.A., Uskov, D.P., and Palatkina, L.V., Change in the surface oxide layer of piercing-mill mandrels over time, Steel Transl., 2016, vol. 46, no. 11, pp. 818–822. https://doi.org/10.3103/s0967091216110036CrossRef

Aleshchenko, A.S., Wear features of working tools during piercing of high-temperature alloys, Chern. Met., 2018, no. 8, pp. 63–70.

Gerasimov, Yu.L., Avdeev, S.V., and Bobarikin, Yu.L., Studying the influence of features of the oxidized coating of piercing mandrels on their durability, Chern. Met., 2017, no. 7, pp. 46–49.

Vydrin, A.V., Korol’, A.V., Korsakov, A.A., and Mikhalkin, D.V., Research of new shape for piercer plug work surface, Truby-2014: Trudy mezhdunarodnoi nauchno-prakticheskoi konferentsii (Truby-2014: Proc. Int. Sci.-Pract. Conf.), Chelyabinsk: Ross. Nauchn.-Issled. Inst. Trubnoi Prom-sti., vol. 2, pp. 156–159.

Khavkin, G.O., Brodskiy, V.M., and Lisovaya, G.V., Comparative characteristics of water-cooled plug of a piercing mill made by various methods, Steel Transl., 2004, vol. 8, pp. 60–62.

Romantsev, B.A., Matyko, O.K., Goncharuk, A.V., Aleshchenko, A.S., and Polivets, A.V., Improving the wear resistance of piercing-mill mandrels, Steel Transl., 2008, vol. 38, no. 11, pp. 897–899. https://doi.org/10.3103/S096709120811003XCrossRef

10.

Korsakov, A.A., Kuryatnikov, A.V., Zvonarev, D.Yu., Korol’, A.V., and Korsakov, A.A., Analysis of technology solutions intended to increase the durability of piercing mandrels, Proizv. Prokata, 2012, no. 5, pp. 27–35.

11.

Derazkola, H.A., Garcia, E., and Murillo-Marrodán, A., Effects of tool–workpiece interfaces friction coefficient on power and energy consumption during the piercing phase of seamless tube production, J. Mater. Res. Technol., 2022, vol. 19, pp. 3172–3188. https://doi.org/10.1016/j.jmrt.2022.06.071CrossRef

12.

Serin, K. and Pehle, H.J., Improved service life of hot working tools in seamless tube plants, Stahl Eisen, 2014, vol. 134, no. 11, pp. 161–174.

13.

Konovalov, M.S., On the choice of material, structure, and method for manufacturing mandrels for piercing workpieces made of corrosion-resistant steels, Innovatsionnaya Nauka, 2015, nos. 12–2, pp. 70–73.

14.

Zorin, I.V., Sokolov, G.N., Dubtsov, Yu.N., Lysak, V.I., and Bobkov, A.S., Welding deposit of pipe piercing mandrels by Ni3Al alloy in nickel using composite wire, Svarka Diagn., 2016, no. 2, pp. 20–23.

15.

Dotsenko, G.E., Ostrobrod, S.B., Novoselova, T.V., and Tolmachiova, L.V., Increasing the durability of mandrels of piercing mill by improving the welding deposit and heat treatment technology, Aktual’nye Napravleniya Nauchnykh Issledovanii: Perspektivy Razvitiya (Relevant Lines of Scientific Research: Theory and Practice), Shirokov, O.N., Ed., Cheboksary: Interaktiv Plus, 2020, pp. 121–124. https://doi.org/10.21661/r-552236CrossRef

16.

Alyutina, E.V., Korsakov, A.A., Mikhalkin, D.V., Korol’, A.V., Ul’yanov, A.G., and Niklyaev, A.V., Neural-network analysis of mandrel life in a piercing mill, Steel Transl., 2019, vol. 49, no. 2, pp. 134–136. https://doi.org/10.3103/s0967091219020025CrossRef

17.

Pyshmintsev, I.Yu., Ananyan, V.V., Lokhanov, D.V., Niklyaev, A.V., and Blagoveshchenskii, S.I., Working tools of screw roller piercing mill, RF Patent 2496590, Byull. Izobret., 2013, no. 30.

Title: Study of Wear Resistance of Mandrels upon Piercing Workpieces Made of Steel 20Kh13
Authors: A. A. Korsakov
D. V. Mikhalkin
A. V. Krasikov
A. S. Aleschenko
Yu. V. Gamin
A. I. Bannikov
Ya. A. Chemaeva
E. Yu. Mikhalkina
Publication date: 01-11-2023
Publisher: Pleiades Publishing
Published in: Steel in Translation / Issue 11/2023
Print ISSN: 0967-0912
Electronic ISSN: 1935-0988
DOI: https://doi.org/10.3103/S096709122311013X

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 11/2023

Studies on Thermochemical Processes Occurring under the Roasting of Siderite Ores

Analysis of Thermal Processes in Steels during Laser Heating

Modern Methods Analysis of Longitudinally Welded Pipes Production in the Continuous Forming Mill TESA10-50 (Pipe Electrical Welding Unit) of the Different Types of Configurations

Influence of Various Kinds of Ultrasonic Treatment on Surface Geometry

Finite-Element Analysis of Stress-Strain State of Steel Reinforcement in Stretching–Bending–Rebending (Cold Stretching)

Improving Corrosion-Resistant Properties of Heat-Resistant Structural Steel by a Low-Temperature Chemicothermal Treatment Based on Nitriding and Nicotriding Processes

Premium Partners