Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
The International Journal of Advanced Manufacturing Technology
Published in: The International Journal of Advanced Manufacturing Technology 5-6/2020

30-05-2020 | ORIGINAL ARTICLE

Study on the influence of micro-textures on wear mechanism of cemented carbide tools

Authors: Junsheng Zhang, Haidong Yang, Shunhua Chen, Huohong Tang

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2020

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

Wear behavior of micro-textured insert with lubrication was studied. Micro-pits with different diameters (80–200 μm), depths (3–10 μm), and area occupancies (10–30%) were manufactured on the tool rake face near the main cutting edge. Experimental research was conducted to reveal the effect of micro-pits on tool-chip interface friction characteristics. Besides, the texture parameter with better tribological characteristics was selected to study the wear mechanism of textured insert. Scanning electron microscopy analysis was conducted on the worn area of rake face. The results confirmed that the micro-textures can effectively reduce the average shear strength of rake face and actual tool-chip contact length during machining. The best average friction coefficient can be obtained with texture diameter of 170 μm, depth of 7 μm, and area occupancy of 20%. Adhesive wear, diffusion wear, and oxidation wear appeared on the worn area of rake face. The micro-textures can effectively reduce the diffusion wear and suppress the built-up edge (BUE) by improving tool-chip interface friction characteristics. The findings are of significance for enhancing the application of textured insert with excellent tribological characteristics.
previous article Chemical mechanical polishing of the narrow channel of a channel-cut crystal
next article Chatter suppression in large overhang face milling using a toolholder with high dynamic performance

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Sharma V, Pandey PM (2016) Recent advances in turning with textured cutting tools: a review. J Clean Prod 137:701–715CrossRef
2.
Orra K, Choudhury SK (2018) Tribological aspects of various geometrically shaped micro-textures on cutting insert to improve tool life in hard turning process. J Manuf Process 31:502–513CrossRef
3.
Arslan A, Masjuki HH, Kalam MA, Varman M, Mufti RA, Mosarof MH, Khuong LS, Quazi MM (2016) Surface texture manufacturing techniques and tribological effect of surface texturing on cutting tool performance: a review. Crit Rev Solid State 41(6):447–481CrossRef
4.
Ghosh P, Pacella M (2020) Effect of laser texturing on the performance of ultra-hard single-point cutting tools. Int J Adv Manuf Technol 106:2635–2648CrossRef
5.
Qian XH, Duan XY, Zou JY (2020) Effects of different tool microstructures on the precision turning of titanium alloy TC21. Int J Adv Manuf Technol 106:5519–5526CrossRef
6.
Ge D, Deng J, Duan R, Liu Y, Li X, Yue H (2019) Effect of micro-textures on cutting fluid lubrication of cemented carbide tools. Int J Adv Manuf Technol 103:3887–3899CrossRef
7.
Liu X, Liu Y, Li L, Tian Y (2019) Performances of micro-textured WC-10Ni3Al cemented carbides cutting tool in turning of Ti6Al4V. Int J Refract Met H 84:104987CrossRef
8.
Duan R, Deng J, Lei S, Ge D, Liu Y, Li X (2019) Effect of derivative cutting on machining performance of micro textured tools. J Manuf Process 45:544–556CrossRef
9.
Duan R, Deng J, Ai X, Liu Y, Chen H (2017) Experimental assessment of derivative cutting of micro-textured tools in dry cutting of medium carbon steels. Int J Adv Manuf Technol 92:3531–3540CrossRef
10.
Wei Y, Kim MR, Lee DW, Park C, Park SS (2017) Effects of micro textured sapphire tool regarding cutting forces in turning operations. Int J Pr Eng Man-gt 4(2):141–147
11.
Kümmel J, Braun D, Gibmeier J, Johannes S, Greiner C, Schulze V, Wanner A (2015) Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation. J Mater Process Technol 215:62–70CrossRef
12.
Li W, Zhang Z (2019) Effect of cutting tool with micro-pits texture on wood cutting performance. PLoS One 14(4):e0214888CrossRef
13.
Liu X, Liu Y, Li L, Tian Y (2019) Optimization of the micro-textures on the cutting tool based on the penetration of the lubricant in the micro-textures. Int J Adv Manuf Technol 104:3173–3180CrossRef
14.
Ye D, Lijun Y, Bai C, Xiaoli W, Yang W, Hui X (2018) Investigations on femtosecond laser-modified microgroove-textured cemented carbide YT15 turning tool with promotion in cutting performance. Int J Adv Manuf Technol 96:4367–4379CrossRef
15.
Sun J, Zhou Y, Deng J, Zhao J (2016) Effect of hybrid texture combining micro-pits and micro-grooves on cutting performance of WC/co-based tools. Int J Adv Manuf Technol 86:3383–3394CrossRef
16.
Alagan NT, Zeman P, Hoier P, Beno T, Klement U (2019) Investigation of micro-textured cutting tools used for face turning of alloy 718 with high-pressure cooling. J Manuf Process 37:606–616CrossRef
17.
Durairaj S, Guo J, Aramcharoen A, Castagne S (2018) An experimental study into the effect of micro-textures on the performance of cutting tool. Int J Adv Manuf Technol 98:1011–1030CrossRef
18.
Pang M, Liu X, Liu K (2019) Effect of conical micro-grooved texture on tool-chip friction property and cutting performance of WC-TiC/co cemented carbide tools. P I Mech Eng J-J Eng 233(5):791–804
19.
Pang M, Nie Y, Ma L (2018) Effect of symmetrical conical micro-grooved texture on tool-chip friction property of WC-TiC/co cemented carbide tools. Int J Adv Manuf Technol 99:737–746CrossRef
20.
Gürgen S, Çakır F, Sofuoğlu M, Orak S, Kuşhan M, Li H (2019) Multi-criteria decision-making analysis of different non-traditional machining operations of Ti6Al4V. Soft Comput 23:5259–5272CrossRef
21.
Gajrani KK, Suresh S, Sankar MR (2018) Environmental friendly hard machining performance of uncoated and MoS2 coated mechanical micro-textured tungsten carbide cutting tools. Tribol Int 125:141–155CrossRef
22.
Gajrani KK, Reddy RPK, Sankar MR (2019) Tribo-mechanical and surface morphological comparison of untextured, mechanical micro-textured (MuT), and coated-MuT cutting tools during machining. P I Mech Eng J-J Eng 233(1):95–111
23.
Xing Y, Deng J, Wu Z, Liu L, Huang P, Jiao A (2018) Analysis of tool-chip interface characteristics of self-lubricating tools with nanotextures and WS2/Zr coatings in dry cutting. Int J Adv Manuf Technol 97:1637–1647CrossRef
24.
Sharma V, Pandey PM (2016) Comparative study of turning of 4340 hardened steel with hybrid textured self-lubricating cutting inserts. Mater Manuf Process 31:1904–1916CrossRef
25.
Feng Y, Zhang J, Wang L, Zhang W, Tian Y, Kong X (2017) Fabrication techniques and cutting performance of micro-textured self-lubricating ceramic cutting tools by in-situ forming of Al2O3-TiC. Int J Refract Met H 68:121–129CrossRef
26.
Kang Z, Fu Y, Chen Y, Ji J, Fu H, Wang S, Li R (2018) Experimental investigation of concave and convex micro-textures for improving anti-adhesion property of cutting tool in dry finish cutting. Int J Pr Eng Man-gt 5(5):583–591
27.
Song WL, Wang ZC, Wang SJ, Zhou K, Guo ZX (2017) Experimental study on the cutting temperature of textured carbide tool embedded with graphite. Int J Adv Manuf Technol 93:3419–3427CrossRef
28.
Arulkirubakaran D, Senthilkumar V, Dinesh S (2017) Effect of textures on machining of Ti-6Al-4V alloy for coated and uncoated tools: a numerical comparison. Int J Adv Manuf Technol 93:347–360CrossRef
29.
Sugihara T, Enomoto T (2017) Performance of cutting tools with dimple textured surfaces: a comparative study of different texture patterns. Precis Eng 49:52–60CrossRef
30.
Ozlu E, Budak E, Molinari A (2009) Analytical and experimental investigation of rake contact and friction behavior in metal cutting. Int J Mach Tool Manu 49:865–875CrossRef
31.
Budak E, Ozlu E (2008) Development of a thermomechanical cutting process model for machining process simulations. CIRP Ann Manuf Technol 57:97–100CrossRef
32.
Song W, Deng J, Zhang H, Yan P (2010) Study on cutting forces and experiment of MoS2/Zr-coated cemented carbide tool. Int J Adv Manuf Technol 49(9–12):903–909
Metadata
Title
Study on the influence of micro-textures on wear mechanism of cemented carbide tools
Authors
Junsheng Zhang
Haidong Yang
Shunhua Chen
Huohong Tang
Publication date
30-05-2020
Publisher
Springer London
Published in
The International Journal of Advanced Manufacturing Technology / Issue 5-6/2020
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-020-05530-4

Other articles of this Issue 5-6/2020

The International Journal of Advanced Manufacturing Technology 5-6/2020 Go to the issue

ORIGINAL ARTICLE

Accuracy improvement of robotic machining based on robot’s structural properties

ORIGINAL ARTICLE

Study on the magnetic abrasive finishing combined with electrolytic process—investigation of machining mechanism

ORIGINAL ARTICLE

Study on cutting speed and energy utilization rate in processing stainless steel with abrasive water jet

ORIGINAL ARTICLE

Analytical and experimental investigation of improved burr morphology prediction at the top edge in metal machining

ORIGINAL ARTICLE

Review of vibration devices for vibration-assisted machining

ORIGINAL ARTICLE

Selective laser melting (SLM) of AISI 316L—impact of laser power, layer thickness, and hatch spacing on roughness, density, and microhardness at constant input energy density

Premium Partners

    Image Credits