Top

The International Journal of Advanced Manufacturing Technology

Published in:

22-11-2019 | ORIGINAL ARTICLE

Study on the mechanism for sparks in cutting metal with abrasive suspension water jet

Authors: Chiheng Qiang, Liucan Li, Xinyong Wang, Chuwen Guo

Published in: The International Journal of Advanced Manufacturing Technology | Issue 1-2/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

As a cold processing method, water jet cutting method has the characteristic of no heat–affected zone compared with traditional cutting methods. It is especially suitable for processing materials sensitive to high temperature conditions. However, it is found that after adding abrasives, sparks often occur when water jet cutting some metals under certain conditions during the experiment. This phenomenon will inevitably restrict the development of abrasive suspension water jet (ASJ) cutting technology in mine and other dangerous working environments. In this paper, based on the experimental phenomena and the impact thermal characteristics of metals, the causes and critical conditions for sparks in cutting metal with ASJ were analyzed. The mathematical prediction model of the relationship between the maximum temperature of ASJ cutting metal and the jet parameters were established. Then, the critical conditions of sparks generation in ASJ cutting different metals under different jet parameters were deduced. And the model was preliminarily verified by cutting experiments of different metals.

previous article Cathode optimization and multi-physics simulation of pulse electrochemical machining for small inner-walled ring grooves

next article Roller burnishing of Ti6Al4V under different cooling/lubrication conditions and tool design: effects on surface integrity

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Hashish M (1991) Characteristics of surface machined with abrasive water jet. Trans. Asme J. Eng. Materials Tech 113:354–362

Hashish M (1988) Visualization of surfaces machined with abrasive water jet cutting process. Exp Mech 28:159–168CrossRef

Yang Z, Chen SM, Zhang YJ, Li M (2009) Development and application of high pressure water jet technology. Mech Manag Dev 24:87–90 (in Chinese with English abstract)

Feng YX (2007) Abrasive water jet milling ceramic materials processing technology research. Shandong University doctoral dissertation

Wang YW (2013) Abrasive water jet cutting titanium alloy experimental study. Xihua University master’s degree thesis

Rongrun R (2002) Current status and development trend of water jet processing technology. Aviation Precis Manuf Technol 38:12–14

Momber AW, Kovacevic R (1998) Principles of abrasive water jet machining. Springer London

Feng DC, Shi LL, Guo CW, Wang FC, Chen YQ (2018) Numerical and experimental study on the flow characteristics of abrasive slurry jet with polymer additives. Int J Adv Manuf Technol 95:3289–3299CrossRef

Kowsari K, Schwartzentruber J, Spelt JK (2017) Erosive smoothing of abrasive slurry-jet micro-machined channels in glass, PMMA, and sintered ceramics: experiments and roughness model. Precis Eng J Int Soc Precis Eng Nanotechnol 49:332–343

10.

Xia S, Guo CW, Wu NN (2010) Study on residual energy of abrasive water jet cutting in coal mine. Coal Eng 03:77–79 (in Chinese with English abstract)

11.

Gong YY, Feng B, Cai LB, Zhu HL (1993) Study on ignition characteristics of friction sparks with different material combinations. Fire Sci 01:44–50 (in Chinese with English abstract)

12.

Gong YY, Feng B, Cai LB, Zhu HL (1993) Photographic study of friction spark characteristics of metals. Prog Nat Sci 02:163–169+193 (in Chinese with English abstract)

13.

Zhang TF, Deng SS, Lei CC, Guan JF (2016) Experimental study on abrasive water jet cutting safety under oil and gas conditions. Nat Gas Oil 34(04):97–100+108+12 (in Chinese with English abstract)

14.

Schmolke S, Pude F, Kirsch L, Honl M, Schwieger K, Krömer S (2008) Wärmeentwicklung bei der Wasser-Abrasivstrahl-Osteotomie/temperature measurements during abrasive water jet osteotomy. Biomedical Engineering/Biomedizinische Technik 49CrossRef

15.

Tang WY, Hu JB, Jing FQ, Zhang RQ (1995) Measurement of metal impact temperature. J National Defense Univ Sci Technol 17(01):87–91 (in Chinese with English abstract)

16.

Dai CD, Tan H (2006) Radiometric measurement of metal impact temperature. J High Pressure Physics 20(2):113–121 (in Chinese with English abstract)

17.

Tan H, Dai CD (2006) Direct measurement of metal melting temperature under shock compression. National Symposium on Explosive Mechanics Experimental Technology (in Chinese with English abstract)

18.

Tang WY, Zhang RQ (1997) Theoretical calculation and analysis of impact temperature. China’s Space Sci Technol 8(02):56–63 (in Chinese with English abstract)

19.

Nie S (2010) Numerical simulation of flow field and pressure field in high pressure abrasive water jet process. New Chinese Technol New Product 23 (in Chinese with English abstract)

20.

Qiang CH, Wang FC, Guo CW (2018) Study on impact stress of abrasive slurry jet in cutting stainless steel. Int J Adv Manuf Technol 100(1-4):297–309CrossRef

21.

Wang FC, Xu QW, Feng DC, Guo CW (2018) Experiment study on performance of abrasive slurry jet with or without high polymer in stainless steel machining. Int J Adv Manuf Technol 95:2449–2456CrossRef

22.

McQueen RG, Marsh SP, Taylor JW, Fritz JN, Carter WJ (1970) The equation of state of solids from shock wave studies. In: Kinslow R (ed) High velocity impact phenomena. Academic, New York, pp 294–419

Title: Study on the mechanism for sparks in cutting metal with abrasive suspension water jet
Authors: Chiheng Qiang
Liucan Li
Xinyong Wang
Chuwen Guo
Publication date: 22-11-2019
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 1-2/2020
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-019-04620-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1-2/2020

Influence of welding parameters on macrostructural and thermomechanical properties in micro friction stir spot welded under high-speed tool rotation

Cathode optimization and multi-physics simulation of pulse electrochemical machining for small inner-walled ring grooves

Announcement of B. John Davies Prize for the best paper published in IJAMT in 2018

Impact of rapid thermal annealing on impurities removal efficiency from silicon carbide for optoelectronic applications

Wrinkling prediction of aluminum alloy tubes during reduced diameter compression forming

Study on influence of grinding depth and grain shape on grinding damage of K9 glass by SPH simulation

Premium Partners