Top

Adsorption

Published in:

03-02-2020

Synergic and competitive adsorption of Li–Na–MgCl₂ onto lithium–aluminum hydroxides

Authors: Huixiong Jiang, Shuiyi Zhang, Ying Yang, Jianguo Yu

Published in: Adsorption | Issue 7/2020

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Layered lithium–aluminum hydroxides have been used for the lithium adsorption for its high selectivity and cyclic stability. The adsorption performances of lithium and sodium in the mixing solution with abundant magnesium chloride were investigated using batch system at 303 K. The lithium adsorption capacity was increased from 5.02 to 5.69 mg/g (initial lithium concentration is 350 mg/L) with the increasing of initial chloride ions concentration from 200 to 350 mg/L, while the sodium decreased. Both the adsorption capacities of lithium and sodium were lower in Li–Na–MgCl₂ system than that’s in Li–MgCl₂ and Na–MgCl₂ system, which indicated the competitive effects between lithium and sodium ions. In addition, the Langmuir model could describe the isotherms of lithium and sodium well. Then, the homogeneous surface diffusion model (HSDM) was applied to represent the lithium adsorption kinetics. The surface diffusion coefficients of lithium were dependent on the initial concentration and affected by sodium ions. The Biot numbers were ranged from 25 to 40 confirming that the intraparticle diffusion is the limiting step. Breakthrough curves of lithium and sodium demonstrated the lithium could be enriched and obtained with fixed bed adsorption process, and verified the competitive adsorption phenomenon.

previous article Adsorption of hydrogen and carbon dioxide in zeolitic imidazolate framework structure with SOD topology: experimental and modelling studies

next article Low-cost novel silica@polyacrylamide composites: fabrication, characterization, and adsorption behavior for cadmium ion in aqueous solution

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Besserguenev, A.V., Fogg, A.M., Francis, R.J., Price, S.J., O'Hare, D., Tolochko, V.P.I.: Synthesis and structure of the gibbsite intercalation compounds [LiAl₂(OH)₆]X {X = Cl, Br, NO₃} and [LiAl₂(OH)₆]Cl·H₂O using synchrotron X-ray and neutron powder diffraction. Chem. Mater. 9(1), 241–247 (1997)CrossRef

Chabani, M., Amrane, A., Bensmaili, A.: Kinetic modelling of the adsorption of nitrates by ion exchange resin. Chem. Eng. J. 125(2), 111–117 (2006). https://doi.org/10.1016/j.cej.2006.08.014CrossRef

Chitrakar, R., Makita, Y., Ooi, K., Sonoda, A.: Synthesis of iron-doped manganese oxides with an ion-sieve property: lithium adsorption from bolivian brine. Ind. Eng. Chem. Res. 53(9), 3682–3688 (2014). https://doi.org/10.1021/ie4043642CrossRef

Choubey, P.K., Kim, M-s, Srivastava, R.R., Lee, J-c, Lee, J.-Y.: Advance review on the exploitation of the prominent energy-storage element: lithium. Part I: from mineral and brine resources. Miner. Eng. 89, 119–137 (2016). https://doi.org/10.1016/j.mineng.2016.01.010CrossRef

Choy KKH, McKay G (2005) Sorption of cadmium, copper, and zinc ions onto bone char using Crank diffusion model. Chemosphere 60(8):1141–1150. doi:https://doi.org/10.1016/j.chemosphere.2004.12.041CrossRefPubMed

Choy, K.K.H., Porter, J.F., McKay, G.: Intraparticle diffusion in single and multicomponent acid dye adsorption from wastewater onto carbon. Chem. Eng. J. 103(1–3), 133–145 (2004). https://doi.org/10.1016/j.cej.2004.05.012CrossRef

Dotto, G.L., Buriol, C., Pinto, L.A.A.: Diffusional mass transfer model for the adsorption of food dyes on chitosan films. Chem. Eng. Res. Des. 92(11), 2324–2332 (2014). https://doi.org/10.1016/j.cherd.2014.03.013CrossRef

Foo, K.Y., Hameed, B.H.: Insights into the modeling of adsorption isotherm systems. Chem. Eng. J. 156(1), 2–10 (2010)CrossRef

Frohlich, A.C., Ocampo Perez, R., Diaz Blancas, V., Salau, N.P.G., Dotto, G.L.: Three-dimensional mass transfer modeling of ibuprofen adsorption on activated carbon prepared by sonication. Chem. Eng. J. 341, 65–74 (2018). https://doi.org/10.1016/j.cej.2018.02.020CrossRef

Guo, X., Hu, S., Wang, C., Duan, H., Xiang, X.: Highly efficient separation of magnesium and lithium and high utilization of magnesium from salt lake brine by a reaction-coupled technology. Ind. Eng. Chem. Res. 57(19), 6618–6626 (2018). https://doi.org/10.1021/acs.iecr.8b01147CrossRef

Hao, H., Liu, Z., Zhao, F., Geng, Y., Sarkis, J.: Material flow analysis of lithium in China. Resour. Policy 51, 100–106 (2017). https://doi.org/10.1016/j.resourpol.2016.12.005CrossRef

Hong, H.J., Ryu, T., Park, I.S., Kim, M., Shin, J., Kim, B.G., Chung, K.S.: Highly porous and surface-expanded spinel hydrogen manganese oxide (HMO)/Al₂O₃ composite for effective lithium (Li) recovery from seawater. Chem. Eng. J. 337, 455–461 (2018). https://doi.org/10.1016/j.cej.2017.12.130CrossRef

Hu, S., Sun, Y., Pu, M., Yun, R., Xiang, X.: Determination of boundary conditions for highly efficient separation of magnesium and lithium from salt lake brine by reaction-coupled separation technology. Sep. Purif. Technol. (2019). https://doi.org/10.1016/j.seppur.2019.115813CrossRef

Ji, Z.Y., Yang, F.J., Zhao, Y.Y., Liu, J., Wang, N., Yuan, J.S.: Preparation of titanium–base lithium ionic sieve with sodium persulfate as eluent and its performance. Chem. Eng. J. 328, 768–775 (2017). https://doi.org/10.1016/j.cej.2017.07.047CrossRef

Jiang, H., Yang, Y., Sun, S., Yu, J.: Adsorption of lithium ions on lithium–aluminum hydroxides: equilibrium and kinetics. Can. J. Chem. Eng. (2019). https://doi.org/10.1002/cjce.23640CrossRef

Kotsupalo, N.P., Ryabtsev, A.D., Poroshina, I.A., Kurakov, A.A., Mamylova, E.V., Menzheres, L.T., Korchagin, M.A.: Effect of structure on the sorption properties of chlorine-containing form of double aluminum lithium hydroxide. Russ. J. Appl. Chem. 86(4), 482–487 (2013). https://doi.org/10.1134/s1070427213040046CrossRef

Kozlova, S.G., Gabuda, S.P., Isupov, V.P., Chupakhina, L.: Using NMR in structural studies of aluminum hydroxide intercalation compounds with lithium salts. J. Struct. Chem. 44(2), 198–205 (2003)CrossRef

Lawagon, C.P., Nisola, G.M., Mun, J., Tron, A., Torrejos, R.E.C., Seo, J.G., Kim, H., Chung, W.J.: Adsorptive Li + mining from liquid resources by H₂TiO₃: equilibrium, kinetics, thermodynamics, and mechanisms. J. Ind. Eng. Chem. 35, 347–356 (2016). https://doi.org/10.1016/j.jiec.2016.01.015CrossRef

Lin X, Huang Q, Qi G, Xiong L, Huang C, Chen X, Li H, Chen X (2017) Adsorption behavior of levulinic acid onto microporous hyper-cross-linked polymers in aqueous solution: Equilibrium, thermodynamic, kinetic simulation and fixed-bed column studies. Chemosphere 171:231–239. doi:https://doi.org/10.1016/j.chemosphere.2016.12.084CrossRefPubMed

Liu X, Zhong M, Chen X, Zhao Z (2018) Separating lithium and magnesium in brine by aluminum-based materials. Hydrometallurgy 176:73–77. doi:https://doi.org/10.1016/j.hydromet.2018.01.005CrossRef

Martin, G., Rentsch, L., Höck, M., Bertau, M.: Lithium market research—global supply, future demand and price development. Energy Storage Mater. 6, 171–179 (2017). https://doi.org/10.1016/j.ensm.2016.11.004CrossRef

Moazeni, M., Hajipour, H., Askari, M., Nusheh, M.: Hydrothermal synthesis and characterization of titanium dioxide nanotubes as novel lithium adsorbents. Mater. Res. Bull. 61, 70–75 (2015). https://doi.org/10.1016/j.materresbull.2014.09.069CrossRef

Narins, T.P.: The battery business: Lithium availability and the growth of the global electric car industry. Extract. Ind. Soc. 4(2), 321–328 (2017). https://doi.org/10.1016/j.exis.2017.01.013CrossRef

Ooi K, Sonoda A, Makita Y, Chitrakar R, Tasaki-Handa Y, Nakazato T (2017) Recovery of lithium from salt-brine eluates by direct crystallization as lithium sulfate. Hydrometallurgy 174:123–130. doi:https://doi.org/10.1016/j.hydromet.2017.10.007CrossRef

Ponnusami, V., Rajan, K.S., Srivastava, S.N.: Application of film-pore diffusion model for methylene blue adsorption onto plant leaf powders. Chem. Eng. J. 163(3), 236–242 (2010). https://doi.org/10.1016/j.cej.2010.07.052CrossRef

Ramakumar, S., Deviannapoorani, C., Dhivya, L., Shankar, L.S., Murugan, R.: Lithium garnets: synthesis, structure, Li + conductivity, Li + dynamics and applications. Prog. Mater. Sci. 88, 325–411 (2017). https://doi.org/10.1016/j.pmatsci.2017.04.007CrossRef

Ramesh, C., Yoji, M., Kenta, O., Akinari, S.: Lithium recovery from salt lake brine by H2TiO3. Dalton Trans. 43(23), 8933–8939 (2014)CrossRef

Ramos Suzaki, P.Y., Munaro, M.T., Triques, C.C., Kleinubing, S.J., Fagundes Klen, M.R., de Matos Jorge, L.M., Bergamasco, R.: Biosorption of binary heavy metal systems: phenomenological mathematical modeling. Chem. Eng. J. 313, 364–373 (2017). https://doi.org/10.1016/j.cej.2016.12.082CrossRef

Rengaraj, S., Joo, C.K., Kim, Y., Yi, J.: Kinetics of removal of chromium from water and electronic process wastewater by ion exchange resins: 1200H, 1500H and IRN97H. J. Hazard. Mater. 102(2–3), 257–275 (2003). https://doi.org/10.1016/s0304-3894(03)00209-7CrossRefPubMed

Ryu, T., Ryu, J.C., Shin, J., Lee, D.H., Kim, Y.H., Chung, K.-S.: Recovery of lithium by an electrostatic field-assisted desorption process. Ind. Eng. Chem. Res. 52(38), 13738–13742 (2013). https://doi.org/10.1021/ie401977sCrossRef

Souza, P.R., Dotto, G.L., Salau, N.P.G.: Detailed numerical solution of pore volume and surface diffusion model in adsorption systems. Chem. Eng. Res. Des. 122, 298–307 (2017). https://doi.org/10.1016/j.cherd.2017.04.021CrossRef

Souza, P.R., Dotto, G.L., Salau, N.P.G.: Statistical evaluation of pore volume and surface diffusion model in adsorption systems. J. Environ. Chem. Eng. 5(6), 5293–5297 (2017). https://doi.org/10.1016/j.jece.2017.10.012CrossRef

Sun, Y., Guo, X., Hu, S., Xiang, X.: Highly efficient extraction of lithium from salt lake brine by LiAl-layered double hydroxides as lithium-ion-selective capturing material. J. Energy Chem. 34, 80–87 (2019). https://doi.org/10.1016/j.jechem.2018.09.022CrossRef

Sun, Y., Yun, R., Zang, Y., Pu, M., Xiang, X.: Highly efficient lithium recovery from pre-synthesized chlorine-ion-intercalated LiAl-layered double hydroxides via a mild solution chemistry process. Materials (Basel, Switzerland) (2019). https://doi.org/10.3390/ma12121968CrossRefPubMedCentral

Vasiliu, S., Bunia, I., Racovita, S., Neagu, V.: Adsorption of cefotaxime sodium salt on polymer coated ion exchange resin microparticles: Kinetics, equilibrium and thermodynamic studies. Carbohydr. Polym. 85(2), 376–387 (2011). https://doi.org/10.1016/j.carbpol.2011.02.039CrossRef

Wang S, Li P, Zhang X, Zheng S, Zhang Y (2017) Selective adsorption of lithium from high Mg-containing brines using HxTiO₃ ion sieve. Hydrometallurgy 174:21–28. doi:https://doi.org/10.1016/j.hydromet.2017.09.009CrossRef

Xiao, J.L., Sun, S.Y., Wang, J., Li, P., Yu, J.G.: Synthesis and adsorption properties of Li_1.6Mn_1.6O₄ spinel. Ind. Eng. Chem. Res. 52(34), 11967–11973 (2013)CrossRef

Yao, C., Chen, T.: A new simplified method for estimating film mass transfer and surface diffusion coefficients from batch adsorption kinetic data. Chem. Eng. J. 265, 93–99 (2015)CrossRef

Zhang, Q., Sun, S., Li, S., Jiang, H., Yu, J.: Adsorption of lithium ions on novel nanocrystal MnO₂. Chem. Eng. Sci. 62, 4869–4874 (2007). https://doi.org/10.1016/j.ces.2007.01.016CrossRef

Zhang, Q.H., Li, S.P., Sun, S.Y., Yin, X.S., Yu, J.G.: Lithium selective adsorption on low-dimensional titania nanoribbons. Chem. Eng. Sci. 65(1), 165–168 (2010). https://doi.org/10.1016/j.ces.2009.06.001CrossRef

Title: Synergic and competitive adsorption of Li–Na–MgCl2 onto lithium–aluminum hydroxides
Authors: Huixiong Jiang
Shuiyi Zhang
Ying Yang
Jianguo Yu
Publication date: 03-02-2020
Publisher: Springer US
Published in: Adsorption / Issue 7/2020
Print ISSN: 0929-5607
Electronic ISSN: 1572-8757
DOI: https://doi.org/10.1007/s10450-020-00208-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 7/2020

Adsorption of CO2 in presence of NOx and SOx on activated carbon textile for CO2 capture in post-combustion conditions

Application of elevated temperature pressure swing adsorption in hydrogen production from syngas

Performance determination of high-purity N2-PSA-plants

Non-thermal plasma-assisted catalytic CO2 conversion over Zn-TCPP 2D catalyst

A priori predictions of type I and type V isotherms by the rigid adsorbent lattice fluid

Coupled gravimetric, manometric and calorimetric study of CO2, N2 and CH4 adsorption on zeolites for the assessment of classical equilibrium models

Premium Partners