Top

Steel in Translation

Published in:

01-10-2019

Temperature Field Calculation at Incomplete Hot Processing of Metal Alloys

Authors: G. M. Zhuravlev, D. N. Romanenko, A. E. Gvozdev, O. M. Gubanov, S. N. Kutepov

Published in: Steel in Translation | Issue 10/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this study, we performed calculations based on the cooling of parts causing plastic deformation and formation changes to its mechanical properties. A change in the temperature field of plastic processing leads to the emergence of temperature stresses and strains that form the final mechanical properties of the metal part. A mathematical description of the cooling process is constructed by solving a system of differential equations. The components of the stress tensor at the time of complete cooling are residual stresses and characterize the mechanical properties. An example is given showing the calculation of air cooling a metal alloy part of the plastic deformation zone after pressing with distribution.

previous article Study of Strain and Structural Peculiarities in Different Stages of Two- and Three-High Screw Rolling

next article Research of the Microstructure of Fe30Cu70 Alloy Obtained by Different Technologies

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Zhuravlev, G.M., Nepolnaya goryachaya obrabotka metallov (Incomplete Hot Processing of Metals), Tula: Tul’sk. Gos. Univ., 2016.

Novatskii, V., Teoriya uprugosti (The Theory of Elasticity), Moscow: Mir, 1975.

Del’, G.D., Opredelenie napryazhenii v plasticheskoi oblasti po raspredeleniyu tverdosti (Determination of Stresses in Plastic Area by Distribution of Hardness), Moscow: Mashinostroenie, 1971.

Korkha, V.A., Uprochnenie metallov pri kholodnoi plasticheskoi deformatsii: spravochnik (Hardening of Metals by Cold Plastic Deformation: Handbook), Moscow: Mashinostroenie, 1980.

Gvozdev, A.E., Breki, A.D., Tsoi, E.V., et al., RF Inventor’s Certificate no. 2018663400, 2018.

Tutyshkin, N.D., Gvozdev, A.E., Tregubov, V.I., et al., Kompleksnye zadachi teorii plastichnosti (Complex Tasks in the Theory of Plasticity), Tutyshkin, N.D. and Gvozdev, A.E., Eds., Tula: Tul’sk. Gos. Univ., 2015, 2nd ed.

Gvozdev, A.E., Sergeyev, N.N., Minayev, I.V., et al., Temperature distribution and structure in the heat-affected zone for steel sheets after laser cutting, Inorg. Mater.: Appl. Res., 2017, vol. 8, no. 1, pp. 148–152.CrossRef

Zhuravlev, G.M., Gvozdev, A.E., Sergeev, N.N., and Provotorov, D.A., Calculation of maximum hardening of low-carbon steels during plastic deformations, Proizvod. Prokata, 2016, no. 7, pp. 9–13.

Kablov, E.N., Innovative developments of the All-Russian Scientific Research Institute of Aviation Materials within the project “Strategic development of materials and technologies of their recycling until 2030,” Aviats. Mater. Tekhnol., 2015, no. 1 (34), pp. 3–33. https://doi.org/10.18577/2071-9140-2015-0-1-3-33

10.

Kablov, E.N., Ospennikova, O.G., and Vershkov, A.V., Rare metals and rare earth elements are the materials of modern and future high technologies, Aviats. Mater. Tekhnol., 2013, suppl. 2, pp. 3–10.

11.

Kablov, E.N., Materials for the BURAN product: innovative solutions for the formation of the sixth technological order, Aviats. Mater. Tekhnol., 2013, suppl. 1, pp. 3–9.

12.

Kablov, E.N. and Startsev, O.V., Fundamental and applied studies of corrosion and aging of materials in climatic conditions (a review), Aviats. Mater. Tekhnol., 2015, no. 4. (37), pp. 38–52. https://doi.org/10.18577/2071-9140-2015-0-4-38-52 CrossRef

13.

Dao Tien Toi, Pressing with distribution in the semi-hot stamping mode, Cand. Sci. (Eng.) Dissertation, Tula, 2013.

Title: Temperature Field Calculation at Incomplete Hot Processing of Metal Alloys
Authors: G. M. Zhuravlev
D. N. Romanenko
A. E. Gvozdev
O. M. Gubanov
S. N. Kutepov
Publication date: 01-10-2019
Publisher: Pleiades Publishing
Published in: Steel in Translation / Issue 10/2019
Print ISSN: 0967-0912
Electronic ISSN: 1935-0988
DOI: https://doi.org/10.3103/S0967091219100140

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2019

Changes in Pipe Geometry in the Course of Sequential Creation of Stresses on the Inner Surface under External Thermomechanical Impacts

Numerical Simulation of Metal Filling into a CCM Mold Equipped with a Deflector

Study of Strain and Structural Peculiarities in Different Stages of Two- and Three-High Screw Rolling

Production of Complex Calcium-Containing Ferrous Alloys of Waste Smelter Slags and High-Ash Coals

Effect of Electrolytic-Plasma Nitrocarburizing on the Structural and Phase State of Ferrite-Pearlitic Steels

Surface Finish Enhancement of Hot-Rolled Strips on the 2000 Wide-Strip Rolling Mill Using Mathematical Modeling at Novolipetsk Steel

Premium Partners