Top

Journal of Materials Science

Published in:

01-09-2010 | Ultrafine Grained Materials

Tensile and compressive test in nanocrystalline and ultrafine carbon steel

Authors: R. Rodríguez-Baracaldo, J. A. Benito, J. M. Cabrera

Published in: Journal of Materials Science | Issue 17/2010

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Plastic deformation behavior was investigated in near fully dense nanostructured and ultrafine-grained bulk samples of carbon steel (0.55 wt% C) under compression and tension tests. The specimens were obtained by hot pressure from mechanically milled powder at 400 and 500 °C. Subsequent heat treatments at temperatures going from 600 to 900 °C produced samples with ferrite grain sizes from 30 nm to 17 μm. Nanocrystalline grained steel samples presented very high strength with low ductility. Once, in the ultrafine range, as the ferritic grain size was increased, the strength was decreased and the ductility was improved. The porosity and carbon atoms within the structure were analyzed in order to explain the results of strength and strain obtained.

previous article Effect of grain size on strain rate sensitivity of cryomilled Al–Mg alloy

next article The ductile to brittle transition of ultrafine-grained Armco iron: an experimental study

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Song R, Ponge D, Raabe D, Speer JG, Matlock DK (2006) Mater Sci Eng A 441:1CrossRef

Liu ZG, Fecht HJ, Umemoto M (2004) Mater Sci Eng A 375–377:839

Han BQ, Yue S (2003) J Mater Proc Technol 136:100CrossRef

Wang YM, Chen M, Zhou F, Ma E (2002) Nature 419:912CrossRefADSPubMed

Han BQ, Lavernia EJ, Mohamed FA (2005) Rev Adv Mater Sci 9:1CrossRef

Lesuer DR, Syn CK, Sherby OD (2005) Mater Sci Eng A 410–411:222

Zhao YH, Liao XZ, Cheng S, Ma E, Zhu YT (2006) Adv Mater 18:2280CrossRef

Zhao MC, Nahamura T, Qiu H, Nagai K, Yang K (2006) Scripta Mater 54:1193CrossRef

Dieter GE (1988) Mechanical metallurgy SI metric. McGraw-Hill, London, UK

10.

Carsley JE, Fisher A, Milligan WW, Aifantis EC (1998) Metall Mater Trans A 29A:2261CrossRef

11.

Jia D, Ramesh KT, Ma E (2000) Scripta Mater 42:73

12.

Jia D, Ramesh KT, Ma E (2003) Acta Mater 51:3495CrossRef

13.

Ma E (2003) Scripta Mater 49:663CrossRef

14.

Wang YM, Ma E (2004) Mater Sci Eng A 375–377:46

15.

Wei Q, Kecskes L, Jiao T, Hartwig KT, Ramesh KT, Ma E (2004) Acta Mater 52:1859CrossRef

16.

Kimura Y, Takaki S (1995) Mater Trans 36(2):289

17.

Yin J, Umemoto M, Liu ZG, Tsuchiya K (2001) ISIJ Int 41:1389CrossRef

18.

Malow TR, Koch CC (1998) Metall Mater Trans A 9A:2285CrossRefADS

19.

Xu Y, Umemoto M, Tsuchiya K (2002) Mater Trans 43:2205CrossRef

20.

Sakai Y, Ohtaguchi M, Kimura Y (2000) In: Symposium on ultrafine grained materials at the 2000 TMS Annual Meeting, p 361

21.

Belyakov A, Sakai Y, Hara T, Kimura Y, Tsuzaki K (2001) Scripta Mater 45:1213CrossRef

22.

Belyakov A, Sakai Y, Hara T, Kimura Y, Tsuzaki K (2003) Scripta Mater 48:1111CrossRef

23.

Takaki S, Kawasaki K, Kimura Y (2001) J Mater Proc Technol 117:359CrossRef

24.

Khan AS, Zhang H, Takacs L (2000) Int J Plast 16:1459CrossRef

25.

Lillo T, Korth G (1998) Nanostruct Mater 10:95

26.

Livne Z, Munitz A, Rawers JC, Fields RJ (1998) Nanostruct Mater 10:503CrossRef

27.

Lesuer DR, Syn CK, Sherby OD (2006) Mater Trans 47(6):1508CrossRef

28.

Kimura Y, Kawasaki K, Goto HY, Takaki S (2000) In: Symposium on ultrafine grained materials at the 2000 TMS Annual Meeting

29.

Belyakov A, Sakai Y, Hara T, Kimura Y, Tsuzaki K (2004) Mater Trans 45(7):2252CrossRef

30.

Korznikov AV, Ivanisenko YV, Safarov LM, Valiev RZ (1994) Nanostruct Mater 4(2):159CrossRef

31.

Todaka Y, Umemoto M, Yin J, Liu Z, Tsuchiya K (2007) Mater Sci Eng A 462:264CrossRef

32.

Umemoto M (2003) Mater Trans 44(10):1900CrossRef

33.

Zhang HW, Gopalan R, Mukai T, Hono K (2005) Scripta Mater 53:863CrossRef

34.

Oh-ishi K, Zhang HW, Ohkubo T, Hono K (2007) Mater Sci Eng A 456:20CrossRef

35.

Srinivasarao B, Oh-ishi K, Ohkubo T, Hono K (2008) Scripta Mater 58:759CrossRef

36.

Malow TR, Koch CC (1997) Acta Mater 45(5):2177CrossRef

37.

Rawers J (1999) Nanostruct Mater 11:1055CrossRef

38.

Park KT, Kim YS, Lee JG, Shin DH (2000) Mater Sci Eng A 293:165CrossRef

39.

Shin DH, Park KT (2005) Mater Sci Eng A 410–411:299

40.

Ohmori A, Torizuka S, Nagai K (2004) ISIJ Int 44(6):1063CrossRef

41.

Torizuka S, Muramatsu E, Murty NS, Nagai K (2006) Scripta Mater 55:751CrossRef

42.

Liu MY, Shi B, Wang C, Ji SK, Cai X, Song HW (2003) Mater Lett 57:2798

43.

Zhao M, Hanamura T, Qiu H, Nagai K, Yang K (2006) Scripta Mater 54:1385CrossRef

44.

Kimura Y, Kawasaki K, Futamura Y, Takaki S (2006) Mater Sci Forum 503–504:317

45.

Liu ZG, Fecht HJ, Xu Y, Yin J, Tsuchiya K, Umemoto M (2003) Mater Sci Eng A 362:322CrossRef

46.

Ohsaki S, Hono K, Hidaka H, Takaki S (2005) Scripta Mater 52:271CrossRef

47.

Rodriguez Baracaldo R, Benito JA, Cabrera JM, Prado JM (2008) Mater Sci Eng A 493:215CrossRef

48.

Wei Q, Cheng S, Ramesh KT, Ma E (2004) Mater Sci Eng A 381:71CrossRef

49.

Munitz A, Livne Z, Rawers JC, Adams JS, Fields RJ (1999) Nanostruct Mater 11:159CrossRef

50.

Srinivasarao B, Oh-ishi K, Ohkubo T, Hono K (2009) Acta Mater 57:3277CrossRef

51.

Tejedor R, Rodriguez Baracaldo R, Benito JA, Cabrera JM (2008) Scripta Mater 59:631CrossRef

52.

Song R, Ponge D, Raabe D (2005) Scripta Mater 52:1075CrossRef

53.

Tomota Y, Narui A, Tsuchida N (2008) ISIJ Int 48:1107CrossRef

54.

Cheng S, Milligan WW, Wang X, Choo H, Liaw PK (2008) Mater Sci Eng A 493:226CrossRef

55.

Wei H, Hibbard GD, Palumbo G, Erb U (2007) Scripta Mater 57:996CrossRef

56.

Zhao YH, Guo YZ, Wei Q, Topping TD, Dangelewicz AM, Zhu YT, Langdon TG, Lavernia EJ (2009) Mater Sci Eng A 525:68CrossRef

Title: Tensile and compressive test in nanocrystalline and ultrafine carbon steel
Authors: R. Rodríguez-Baracaldo
J. A. Benito
J. M. Cabrera
Publication date: 01-09-2010
Publisher: Springer US
Published in: Journal of Materials Science / Issue 17/2010
Print ISSN: 0022-2461
Electronic ISSN: 1573-4803
DOI: https://doi.org/10.1007/s10853-010-4600-7

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 17/2010

Information on deformation mechanisms in nanocrystalline Pd–10% Au inferred from texture analysis

Grain refinement and mechanical behavior of a magnesium alloy processed by ECAP

Hardness measurements of accumulative roll-bonded Mo foils

EBSD characterization of an ECAP deformed Nb single crystal

Ultrahigh strength of nanocrystalline iron-based alloys produced by high-pressure torsion

Microstructure evolution of CuZr polycrystals processed by high-pressure torsion

Premium Partners