Top

Strength of Materials

Published in:

21-07-2023

The Ductile-Brittle Transition Mechanism of 15MnTi Steel Under Dynamic Loading

Authors: Y. L. Li, D. Yao, Z. W. Liu, J. C. Luo, H. W. Qiao, L. Sun, X. S. Jiang, P. Z. Li

Published in: Strength of Materials | Issue 3/2023

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This work studied the ductile-brittle transition process of 15MnTi steel under different dynamic loading conditions. The strength of 15MnTi steel increased with strain rate because dislocation movement and element diffusion were inhibited. The fracture mode was different under different loading speeds. When the loading speed was lower than 0.025 m/s, the fracture mode was complete ductile fracture; when the loading speed was 0.1 –0.4 m/s, the fracture mode was ductile-brittle fracture; and when the loading speed was higher than 0.5 m/s, the fracture mode was a brittle fracture. In the three-point bending test, the dynamic brittle fracture rate of 15MnTi steel decreased with increasing crack tip constraint, and the brittle fracture resistance decreased with increasing loading rate. In the Charpy impact test, the fracture mode of the prefabricated crack specimens was a ductile fracture. In addition, when the loading rate was 0.1 m/s, the toughness characteristics were not obvious. The fracture had tear dimples at loading rates ranging from 1 to 3.5 m/s, showing certain ductile fracture characteristics. There were many dislocations in the matrix, and TiC was distributed in the matrix. Plenty of dislocations accumulated around the particles, which improved the strength by hindering the movement of the dislocations.

previous article Application of Dynamic Elastic Modulus Targeted Testing Methods for Old Concrete Aqueducts

next article Mechanical Properties of Recycled Concrete with Brick Blocks Under Different Compression Conditions

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Y. Li, D. Yao, H. Qiao, et al., “Dynamic ductile-brittle transition and fracture toughness measurement of metal under intermediate-low loading velocities,” Acta Mech Sin, 53, No. 2, 424–436 (2021). https://doi.org/10.6052/0459-1879-20-304CrossRef

S. Paul, S. Bhattacharjee, S. K. Acharyya, and P. Sahoo, “Finite element simulation of fracture toughness testing of 20MnMoNi55 steel and the effect of loading rate on reference temperature,” P I Mech Eng L-J Mat, 235, No. 1, 162–175 (2020). https://doi.org/10.1177/1464420720956673CrossRef

R. Chaouadi and J. L. Puzzolante, “Loading rate effect on ductile crack resistance of steels using precracked Charpy specimens,” Int J Pres Ves Pip, 85, No. 11, 752–761 (2008). https://doi.org/10.1016/j.ijpvp.2008.08.004CrossRef

Q. Tong and S. Li, “A concurrent multiscale study of dynamic fracture,” Comput Meth Appl M, 366, 113075 (2020). https://doi.org/10.1016/j.cma.2020.113075

Z. J. Xu, Y. L. Li, and M. Kikuchi, “Research on Mode I and Mode II dynamic fracture in high strength steels under high loading rates,” Adv Mater Res, 33-37, 351–356 (2008). https://doi.org/10.4028/www.scientific.net/AMR.33-37.351

H. Chen, C. Zhang, H. Chen, et al., “Understanding microstructure-evolution-dependent fracture behaviors in pearlitic steels,” J Iron Steel Res Int, 27, No. 3, 334–341 (2020). https://doi.org/10.1007/s42243-019-00324-9CrossRef

Q. L. Niu, W. W. Ming, M. Chen, et al., “Dynamic mechanical behavior of ultra high strength steel 30CrMnSiNi2A at high strain rates and elevated temperatures,” J Iron Steel Res Int, 24, No. 7, 724–729 (2017). https://doi.org/10.1016/S1006-706X(17)30109-7CrossRef

C. H. Guo, F. C. Jiang, R. T. Liu, and Y. Yang, “Effect on the contact between fracture specimen and supports in Hopkinson bar loaded fracture test,” Int J Fracture, 169, No. 1, 77–84 (2011). http://dx.doi.org/https://doi.org/10.1007/s10704-011-9588-8CrossRef

F. Dai, R. Chen, and K. Xia, “A semi-circular bend technique for determining dynamic fracture toughness,” Exp Mech, 50, No. 6, 783–791 (2010). http://dx.doi.org/https://doi.org/10.1007/s11340-009-9273-2CrossRef

10.

Z. Xu, Y. Li, and F. Huang, “Application of split Hopkinson tension bar technique to the study of dynamic fracture properties of materials,” Acta Mech Sin, 28, No. 2, 424–431 (2012). http://dx.doi.org/https://doi.org/10.1007/s10409-012-0046-2CrossRef

11.

D. Z. Li, Y. H. Wei, C.Y. Liu, et al., “Effects of high strain rate on properties and microstructure evolution of twip steel subjected to impact loading,” J Iron Steel Res Int, 17, No. 6, 67–73 (2010). http://doi.org/https://doi.org/10.1016/S1006-706X (10)60116-1CrossRef

12.

I. V. Varfolomeev and J. R. Klepaczko, “Effect of strain rate on the geometry of the plastic zone near a Mode II crack tip. Parametric analysis,” Strength Mater, 27, No. 3, 138–145 (1995). https://doi.org/10.1007/BF02209479CrossRef

13.

J. F. Kalthoff, “Fracture behavior under high rates of loading,” Eng Fract Mech, 23, No. 1, 289–298 (1986). https://doi.org/10.1016/0013-7944(86)90193-1CrossRef

14.

M. L. Wilson, R. H. Hawley, and J. Duffy, “The effect of loading rate and temperature on fracture initiation in 1020 hot-rolled steel,” Eng Fract Mech, 13, No. 2, 371–385 (1980). https://doi.org/10.1016/0013-7944(80)90066-1CrossRef

15.

S. Henschel and L. Kruger, “Effect of inhomogeneous distribution of non-metallic inclusions on crack path deflection in G42CrMo4 steel at different loading rates,” Int J Fracture, 9, No. 34, 326–333 (2015). https://doi.org/10.3221/IGF-ESIS.34.35CrossRef

16.

R. G. Davies and C. L. Magee, “The effect of strain-rate upon the tensile deformation of materials,” J Eng Mater Tech, 97, No. 2, 151–155 (1975). https://doi.org/10.1115/1.3443275CrossRef

17.

J. Y. Zhang, P. Jiang, Z. L. Zhu, et al., “Tensile properties and strain hardening mechanism of Cr-Mn-Si-Ni alloyed ultra-strength steel at different temperatures and strain rates,” J Alloy Compd, 842, No. 25, 155856 (2020). https://doi.org/10.1016/j.jallcom.2020.155856

18.

F. Chen, Z. Cui, and S. Chen, “Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: Dynamic recrystallization,” Mater Sci Eng A, 528, No. 15, 5073–5080 (2011). https://doi.org/10.1016/j.msea.2011.03.008CrossRef

19.

M. Itabashi and K. Kawata, “Carbon content effect on high-strain-rate tensile properties for carbon steels,” Int J Impact Eng, 24, No. 2, 117–131 (2000). https://doi.org/10.1016/S0734-743X(99)00050-0CrossRef

20.

S. Lee, S. Kim, B. Hwang, et al., “Effect of carbide distribution on the fracture toughness in the transition temperature region of an SA 508 steel,” Acta Mater, 50, No. 19, 4755–4762 (2002). https://doi.org/10.1016/S1359-6454(02)00313-0CrossRef

21.

H. Kim, M. Kang, H. J. Jung, et al., “Mechanisms of toughness improvement in Charpy impact and fracture toughness tests of non-heat-treating cold-drawn steel bar,” Mater Sci Eng A, 571, No. 1, 38–48 (2013). https://doi.org/10.1016/j.msea.2013.02.011CrossRef

22.

A. Inoue, T. Ogura, and T. Masumoto, “Burgers vectors of dislocations in cementite crystal,” Scripta Metall, 11, No. 1, 1-5 (1977). https://doi.org/10.1016/0036-9748(77)90002-3CrossRef

23.

Z. Zhang and D. L. Chen, “Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength,” Scripta Mater, 54, No. 7, 1321–1326 (2006). https://doi.org/10.1016/j.scriptamat.2005.12.017CrossRef

24.

W. T. Yu, J. Li, C. B. Shi, and Q. T. Zhu, “Effect of titanium on the microstructure and mechanical properties of high-carbon martensitic stainless steel 8Cr13MoV,” Metals, 6, No. 8, 193–208 (2016). https://doi.org/10.3390/met6080193CrossRef

25.

R. P. Todorov and K. G. Khristov, “Widmanstatten structure of carbon steels,” Met Sci Heat Treat, 46, Nos. 1–2, 49–53 (2004). https://doi.org/10.1023/B:MSAT.0000029601.58461.bdCrossRef

Title: The Ductile-Brittle Transition Mechanism of 15MnTi Steel Under Dynamic Loading
Authors: Y. L. Li
D. Yao
Z. W. Liu
J. C. Luo
H. W. Qiao
L. Sun
X. S. Jiang
P. Z. Li
Publication date: 21-07-2023
Publisher: Springer US
Published in: Strength of Materials / Issue 3/2023
Print ISSN: 0039-2316
Electronic ISSN: 1573-9325
DOI: https://doi.org/10.1007/s11223-023-00556-x

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2023

Determination of the Reliability of Mine Support Equipment Considering Its Deformation Risks

French Line Prediction for Steels Using Experimental Data to Construct a Fatigue Curve. Part 1. Literature Survey and Development of the Computational Method for Constructing the French Line

Wear Resistance of Titanium Carbide-Modified 25Kh5FMS Deposited Metal

Design of Flexible Drill Pipe with Ultra-Short Radius in Sidetrack Horizontal Well Based on the Snake Bone Directional Variability

Effect of the Impacting Electrode Shape on the Stress-Strain State of a Plate After Using the Dynamic Component of Electrodynamic Treatment

Fracture Toughness Assessment of 15Kh2NMFA-A Steel Based on Local Fracture Models

Premium Partners