Skip to main content
Top

2021 | OriginalPaper | Chapter

The Effect of Curing Duration on Restrained Shrinkage Cracking of Concrete Containing Macro Polymeric Fibers

Authors : Alireza Bagheri, Armin Jamali, Mina Pourmir, Hamed Zanganeh

Published in: International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures

Publisher: Springer International Publishing

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The positive influence of longer duration of wet curing in improving the mechanical and durability properties of concrete is fairly well established. However, it is increasingly becoming apparent that longer duration of wet curing, unfavorably affects the drying shrinkage characteristics of concrete, resulting in both increased amount of shrinkage and also increased cracking potential under restrained conditions. Various types of fibers have been developed and used to enhance the durability of concrete structures by controlling the restrained shrinkage cracking. However, the influence of longer duration of wet curing on the age at cracking and crack characteristics of concrete containing macro polymeric fibers has not been previously determined. In this research, the effects of three different curing durations on strength characteristics and free and restrained drying shrinkage performance of mixes with and without macro polymeric fibers were studied. The results show that drying shrinkage and cracking potential of the control mixes increased with longer duration of wet curing, confirming the trend reported by recent literature. Interestingly the mixes containing fibers also showed the same trend and both the amount of free shrinkage and the restrained shrinkage potential increased with increased duration of wet curing. With regards to crack widths, the results show that with longer wet curing, the width of the single crack for the control mixes increased significantly while the cumulative width of the multiple cracks of the mixes with polymeric fibers increased only modestly.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Springer Professional "Wirtschaft"

Online-Abonnement

Mit Springer Professional "Wirtschaft" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 340 Zeitschriften

aus folgenden Fachgebieten:

  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Versicherung + Risiko




Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference Mindess, S., Young, J.F., Darwin, D.: Concrete, 2nd-ed. Prentice-Hall, Englewood Cliffs, NJ (2003) Mindess, S., Young, J.F., Darwin, D.: Concrete, 2nd-ed. Prentice-Hall, Englewood Cliffs, NJ (2003)
2.
go back to reference Akhavan, A., Shafaatian, S.M.H., Rajabipour, F.: Quantifying the effects of crack width, tortuosity, and roughness on water permeability of cracked mortars. Cem. Concr. Res. 42, 313–320 (2012)CrossRef Akhavan, A., Shafaatian, S.M.H., Rajabipour, F.: Quantifying the effects of crack width, tortuosity, and roughness on water permeability of cracked mortars. Cem. Concr. Res. 42, 313–320 (2012)CrossRef
3.
go back to reference Passuello, A., Moriconi, G., Shah, S.P.: Cracking behavior of concrete with shrinkage reducing admixtures and PVA fibers. Cement Concr. Compos. 31(10), 699–704 (2009)CrossRef Passuello, A., Moriconi, G., Shah, S.P.: Cracking behavior of concrete with shrinkage reducing admixtures and PVA fibers. Cement Concr. Compos. 31(10), 699–704 (2009)CrossRef
4.
go back to reference Sant, G., Eberhardt, A., Bentz, D., Weiss, J.: The influence of shrinkage-reducing admixtures on moisture absorption in cementitious materials at early ages. J. Mater. Civ. Eng. 22(3), 277–286 (2010)CrossRef Sant, G., Eberhardt, A., Bentz, D., Weiss, J.: The influence of shrinkage-reducing admixtures on moisture absorption in cementitious materials at early ages. J. Mater. Civ. Eng. 22(3), 277–286 (2010)CrossRef
5.
go back to reference Lura, P., Pease, B., Mazzotta, G.B., Rajabipour, F., Weiss, J.: Influence of shrinkage-reducing admixtures on the development of plastic shrinkage cracks. ACI Mater. J. 104(2), 187–194 (2007) Lura, P., Pease, B., Mazzotta, G.B., Rajabipour, F., Weiss, J.: Influence of shrinkage-reducing admixtures on the development of plastic shrinkage cracks. ACI Mater. J. 104(2), 187–194 (2007)
6.
go back to reference Bagheri, A., Jamali, A., Pourmir, M., Zanganeh, H.: The influence of curing time on restrained shrinkage cracking of concrete with shrinkage reducing admixture. Adv. Civ. Eng. Mater. 8(1), 596–610 (2019) Bagheri, A., Jamali, A., Pourmir, M., Zanganeh, H.: The influence of curing time on restrained shrinkage cracking of concrete with shrinkage reducing admixture. Adv. Civ. Eng. Mater. 8(1), 596–610 (2019)
7.
go back to reference Bagheri, A., Jamali, A., Gorgani-Firoozjah, M., Zanganeh, H.: Comparison of the performance of macro-polymeric fibers and steel fibers in controlling drying shrinkage cracks of concrete. Int. J. Struct. Civ. Eng. Res. 7(4), 302–308 (2018)CrossRef Bagheri, A., Jamali, A., Gorgani-Firoozjah, M., Zanganeh, H.: Comparison of the performance of macro-polymeric fibers and steel fibers in controlling drying shrinkage cracks of concrete. Int. J. Struct. Civ. Eng. Res. 7(4), 302–308 (2018)CrossRef
8.
go back to reference Shen, D., Wena, C., Kang, J., Shi, H., Xu, Z.: Early-age stress relaxation and cracking potential of high-strength concrete reinforced with barchip fiber. Constr. Build. Mater. 258, 119538 (2020)CrossRef Shen, D., Wena, C., Kang, J., Shi, H., Xu, Z.: Early-age stress relaxation and cracking potential of high-strength concrete reinforced with barchip fiber. Constr. Build. Mater. 258, 119538 (2020)CrossRef
9.
go back to reference Yousefieh, N., Joshaghani, A., Hajibandeh, E., Shekarchi, M.: Influence of fibers on drying shrinkage in restrained concrete. Constr. Build. Mater. 148, 833–845 (2017)CrossRef Yousefieh, N., Joshaghani, A., Hajibandeh, E., Shekarchi, M.: Influence of fibers on drying shrinkage in restrained concrete. Constr. Build. Mater. 148, 833–845 (2017)CrossRef
10.
go back to reference Guide to external curing of concrete, ACI 308R-16, (2016) Guide to external curing of concrete, ACI 308R-16, (2016)
11.
go back to reference Khanzadeh-Moradllo1, M., Meshkini, M.H., Eslamdoost, E., Sadati, S., Shekarchi, M.: Effect of wet curing duration on long-term performance of concrete in tidal zone of marine environment. Int. J. Concr. Struct. Mater. 9(4), 487–498 (2015) Khanzadeh-Moradllo1, M., Meshkini, M.H., Eslamdoost, E., Sadati, S., Shekarchi, M.: Effect of wet curing duration on long-term performance of concrete in tidal zone of marine environment. Int. J. Concr. Struct. Mater. 9(4), 487–498 (2015)
12.
go back to reference Beushausen, H., Bester, N.: The influence of curing on restrained shrinkage cracking of bonded concrete overlays. Cem. Concr. Res. 87, 87–96 (2016)CrossRef Beushausen, H., Bester, N.: The influence of curing on restrained shrinkage cracking of bonded concrete overlays. Cem. Concr. Res. 87, 87–96 (2016)CrossRef
13.
go back to reference Samouh, H., Rozière, E., Wisniewski, W., Loukili, A.: Consequences of longer sealed curing on drying shrinkage, cracking and carbonation of concrete. Cem. Concr. Res. 95, 117–131 (2017)CrossRef Samouh, H., Rozière, E., Wisniewski, W., Loukili, A.: Consequences of longer sealed curing on drying shrinkage, cracking and carbonation of concrete. Cem. Concr. Res. 95, 117–131 (2017)CrossRef
14.
go back to reference Hajibabaee, A., Grasley, Z., Ley, M.T.: Mechanisms of dimensional instability caused by differential drying in wet cured cement paste. Cem. Concr. Res. 79, 151–158 (2016)CrossRef Hajibabaee, A., Grasley, Z., Ley, M.T.: Mechanisms of dimensional instability caused by differential drying in wet cured cement paste. Cem. Concr. Res. 79, 151–158 (2016)CrossRef
15.
go back to reference Hajibabaee, A., Ley, M.T.: The impact of wet curing on curling in concrete caused by drying shrinkage. Mater. Struct. 49(5), 1629–1639 (2016)CrossRef Hajibabaee, A., Ley, M.T.: The impact of wet curing on curling in concrete caused by drying shrinkage. Mater. Struct. 49(5), 1629–1639 (2016)CrossRef
16.
go back to reference Deboodt, T., Fu, T., Ideker, J.H.: Evaluation of FLWA and SRAs on autogenous deformation and long-term drying shrinkage of high performance concrete. Constr. Build. Mater. 119, 53–60 (2016)CrossRef Deboodt, T., Fu, T., Ideker, J.H.: Evaluation of FLWA and SRAs on autogenous deformation and long-term drying shrinkage of high performance concrete. Constr. Build. Mater. 119, 53–60 (2016)CrossRef
17.
go back to reference Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete, ACI 209.2R-08, Farmington Hills, MI: American Concrete Institute (2008) Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete, ACI 209.2R-08, Farmington Hills, MI: American Concrete Institute (2008)
18.
go back to reference Testing Hardened Concrete: Part3: Compressive Strength of Test Specimens, BS EN 12390–3. British Standards Institute, London (2019) Testing Hardened Concrete: Part3: Compressive Strength of Test Specimens, BS EN 12390–3. British Standards Institute, London (2019)
19.
go back to reference Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM C496/C496M, West Conshohocken, PA: ASTM International, approved October 1 (2017) Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM C496/C496M, West Conshohocken, PA: ASTM International, approved October 1 (2017)
20.
go back to reference Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, ASTM C157/C157M, West Conshohocken, PA: ASTM International, approved August 15 (2017) Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, ASTM C157/C157M, West Conshohocken, PA: ASTM International, approved August 15 (2017)
21.
go back to reference Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage, ASTM C1581/C1581M, West Conshohocken, PA: ASTM International, approved July 1 (2018) Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage, ASTM C1581/C1581M, West Conshohocken, PA: ASTM International, approved July 1 (2018)
22.
go back to reference Guide for specifying, proportioning and production of fiber reinforced concrete, ACI 544-3, pp. 4–8 (2008). ISBN 978-0-87031-311-0 Guide for specifying, proportioning and production of fiber reinforced concrete, ACI 544-3, pp. 4–8 (2008). ISBN 978-0-87031-311-0
23.
go back to reference Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement, ASTM C596, West Conshohocken, PA: ASTM International, approved December 1 (2018) Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement, ASTM C596, West Conshohocken, PA: ASTM International, approved December 1 (2018)
24.
go back to reference Hobbs, D.W.: Influence of specimen geometry upon weight change and shrinkage of air-dried concrete specimens. Mag. Concr. Res. 29(99), 70–80 (1977)CrossRef Hobbs, D.W.: Influence of specimen geometry upon weight change and shrinkage of air-dried concrete specimens. Mag. Concr. Res. 29(99), 70–80 (1977)CrossRef
Metadata
Title
The Effect of Curing Duration on Restrained Shrinkage Cracking of Concrete Containing Macro Polymeric Fibers
Authors
Alireza Bagheri
Armin Jamali
Mina Pourmir
Hamed Zanganeh
Copyright Year
2021
DOI
https://doi.org/10.1007/978-3-030-72921-9_15