The Effects of Sample Position and Gas Flow Pattern on the Sintering of a 7xxx Aluminum Alloy

The effects of sample position and gas flow pattern on the sintering of a 7xxx aluminum alloy Al-7Zn-2.5Mg-1Cu in flowing nitrogen have been investigated both experimentally and numerically. The near-surface pore distribution and sintered density of the samples show a strong dependency on the sample separation distance over the range from 2 mm to 40 mm. The open porosity in each sample increases with increasing separation distance while the closed porosity remains essentially unchanged. A two-dimensional computational fluid dynamics (CFD) model has been developed to analyze the gas flow behavior near the sample surfaces during isothermal sintering. The streamlines, velocity profile, and volume flow rate in the cavity between each two samples are presented as a function of the sample separation distance at a fixed nitrogen flow rate of 6 L/min. The CFD modeling results provide essential details for understanding the near-surface pore distribution and density of the sintered samples. It is proposed that the different gas flow patterns near the sample surfaces result in variations of the oxygen content from the incoming nitrogen flow in the local sintering atmosphere, which affects the self-gettering process of the aluminum compacts during sintering. This leads to the development of different near-surface pore distributions and sintered densities.