Skip to main content
Top
Published in: Metallurgical and Materials Transactions A 8/2013

01-08-2013

The Influence of Si and Mg Content on the Microstructure, Tensile Ductility, and Stretch Formability of 6xxx Alloys

Authors: Hao Zhong, Paul A. Rometsch, Yuri Estrin

Published in: Metallurgical and Materials Transactions A | Issue 8/2013

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In this study, the effect of Si and Mg content on the microstructure, tensile ductility, and stretch formability of naturally aged Al-Mg-Si alloys has been investigated using optical microscopy, scanning electron microscopy, tensile testing, forming limit diagram tests, and various modeling approaches. The results show that by raising the Si content in the alloy, the tensile ductility and stretch formability can be improved. By contrast, increasing the Mg content in the alloy has little influence on the tensile ductility and stretch formability. The results are discussed in terms of the effects of microstructural features such as solutes, clusters, and dispersoids on the work-hardening and strain rate-hardening behavior of the materials. Furthermore, thermodynamic modeling is employed to predict microstructures that could improve the stretch formability of the high Mg content alloy.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
1.
go back to reference S.M. Hirth, G.J. Marshall, S.A. Court and D.J. Lloyd: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 452–56. S.M. Hirth, G.J. Marshall, S.A. Court and D.J. Lloyd: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 452–56.
4.
go back to reference J.E. Bird and J. L. Duncan (1981) Metall. Trans. A, 12A, pp. 235–41. J.E. Bird and J. L. Duncan (1981) Metall. Trans. A, 12A, pp. 235–41.
6.
go back to reference A.K. Sachdev (1990) Metall. Trans. A 21A, pp. 165–75. A.K. Sachdev (1990) Metall. Trans. A 21A, pp. 165–75.
7.
go back to reference S.J. Murtha: SAE Tech. Paper Ser., no. 950718, 1995, pp. 657–66. S.J. Murtha: SAE Tech. Paper Ser., no. 950718, 1995, pp. 657–66.
8.
go back to reference J. Bottema, C. Lahaye, R. Baartman, L. Zhuang, P. De Smet, and F. Schoepen: SAE Tech. Paper Ser., no. 981007, 1998, pp. 1–8. J. Bottema, C. Lahaye, R. Baartman, L. Zhuang, P. De Smet, and F. Schoepen: SAE Tech. Paper Ser., no. 981007, 1998, pp. 1–8.
9.
go back to reference E. Brünger, O. Engler and J. Hirsch (2006) Virtual Fabrication of Aluminium Products: Microstructural Modeling in Industrial Aluminum Fabrication Processes. Wiley-VCH, Weinheim, , p. 55. E. Brünger, O. Engler and J. Hirsch (2006) Virtual Fabrication of Aluminium Products: Microstructural Modeling in Industrial Aluminum Fabrication Processes. Wiley-VCH, Weinheim, , p. 55.
10.
go back to reference D.V. Wilson, A.R. Mirshames and W.T. Roberts: Int. J. Mech. Sci., 1983, vol. 25, pp. 859–70.CrossRef D.V. Wilson, A.R. Mirshames and W.T. Roberts: Int. J. Mech. Sci., 1983, vol. 25, pp. 859–70.CrossRef
11.
go back to reference R. Pearce and D. Ganguli: J. Inst. Met., 1972, vol. 100, pp. 289–95. R. Pearce and D. Ganguli: J. Inst. Met., 1972, vol. 100, pp. 289–95.
12.
go back to reference P.W. Beaver and B.A. Parker: Mater. Sci. Eng., 1986, vol. 82, pp. 217–24.CrossRef P.W. Beaver and B.A. Parker: Mater. Sci. Eng., 1986, vol. 82, pp. 217–24.CrossRef
13.
go back to reference R.G. Kamat, J.F. Butler, Jr., S.J. Murtha and F.S. Bovard (2002) Mater. Sci. Forum 396–402, pp. 1591–96.CrossRef R.G. Kamat, J.F. Butler, Jr., S.J. Murtha and F.S. Bovard (2002) Mater. Sci. Forum 396–402, pp. 1591–96.CrossRef
16.
go back to reference M. Weiss, M.E. Dingle, B.F. Rolfe and P.D. Hodgson: J. Eng. Mater. Technol., 2007, vol. 129, pp. 530–37.CrossRef M. Weiss, M.E. Dingle, B.F. Rolfe and P.D. Hodgson: J. Eng. Mater. Technol., 2007, vol. 129, pp. 530–37.CrossRef
17.
go back to reference R.T. Dehoff and F.N. Rhines: Quantitative Microscopy, p. 46, McGraw-Hill, New York, 1968. R.T. Dehoff and F.N. Rhines: Quantitative Microscopy, p. 46, McGraw-Hill, New York, 1968.
18.
go back to reference L.M. Brown (1979) Strength of Metals and Alloys. Pergamon, Aachen, , p. 1551. L.M. Brown (1979) Strength of Metals and Alloys. Pergamon, Aachen, , p. 1551.
19.
go back to reference TTAL6: TT Al-Based Alloys Database, Version 6.0, ThermoTech Ltd., Surrey Technology Center, Guildford, U.K., 2007. TTAL6: TT Al-Based Alloys Database, Version 6.0, ThermoTech Ltd., Surrey Technology Center, Guildford, U.K., 2007.
20.
go back to reference N. C. W. Kuijpers, F. J. Vermolen, C. Vuik, P.T.G. Koenis, K.E. Nilsen, S. van der Zwaag (2005) Mater. Sci. Eng. A 394, pp. 9–19.CrossRef N. C. W. Kuijpers, F. J. Vermolen, C. Vuik, P.T.G. Koenis, K.E. Nilsen, S. van der Zwaag (2005) Mater. Sci. Eng. A 394, pp. 9–19.CrossRef
21.
go back to reference W. J. Poole, X. Wang, D. J. Lloyd, J. D. Embury: Philos. Mag., 2010, vol. 85, pp. 3113–35.CrossRef W. J. Poole, X. Wang, D. J. Lloyd, J. D. Embury: Philos. Mag., 2010, vol. 85, pp. 3113–35.CrossRef
22.
go back to reference K. Strobel, E. Sweet, M. Easton, JF Nie and M. Couper: Mater. Sci. Forum, 2010, vol. 654–656, pp. 926–29.CrossRef K. Strobel, E. Sweet, M. Easton, JF Nie and M. Couper: Mater. Sci. Forum, 2010, vol. 654–656, pp. 926–29.CrossRef
23.
go back to reference K.J. Kim, C.W. Kim, B.I. Choi, C.W. Sung, H.Y. Kim, S.T. Won, H.Y. RYU: J. Solid Mech. Mater. Eng., 2008, vol. 2, pp. 574–81.CrossRef K.J. Kim, C.W. Kim, B.I. Choi, C.W. Sung, H.Y. Kim, S.T. Won, H.Y. RYU: J. Solid Mech. Mater. Eng., 2008, vol. 2, pp. 574–81.CrossRef
24.
go back to reference P. M. Rodrigues: Sheet Met. Ind., 1984, vol. 6, pp. 492–95. P. M. Rodrigues: Sheet Met. Ind., 1984, vol. 6, pp. 492–95.
25.
go back to reference K. Campbell, L. Dover, T.R. Ramachandran and J.D. Embury: Met. Forum, 1979, vol. 2, pp. 229–35. K. Campbell, L. Dover, T.R. Ramachandran and J.D. Embury: Met. Forum, 1979, vol. 2, pp. 229–35.
26.
go back to reference A. Korbel, J.D. Embury, M. Hatherly, P.L. Martin and H.W. Erbsloh: Acta Metall., 1986, vol. 34, pp. 1999–2009.CrossRef A. Korbel, J.D. Embury, M. Hatherly, P.L. Martin and H.W. Erbsloh: Acta Metall., 1986, vol. 34, pp. 1999–2009.CrossRef
27.
28.
go back to reference L.R. Morris, R. Iricibar, J.D. Embury and J.L. Duncan: Aluminum transformation technology and applications, p. 549, ASM, Buenos Aires, 1982. L.R. Morris, R. Iricibar, J.D. Embury and J.L. Duncan: Aluminum transformation technology and applications, p. 549, ASM, Buenos Aires, 1982.
29.
30.
31.
go back to reference D.J. Lloyd: Metall. Trans. A, 1980, vol. 11A, pp. 1287–94. D.J. Lloyd: Metall. Trans. A, 1980, vol. 11A, pp. 1287–94.
32.
go back to reference L.M. Cheng, W.J. Poole, J.D. Embury, D.J. Lloyd: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2473–81.CrossRef L.M. Cheng, W.J. Poole, J.D. Embury, D.J. Lloyd: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2473–81.CrossRef
33.
go back to reference N.D. Alexopoulos and M. Tiryakioglu (2009) Mater. Sci. Eng. A 507:236–40.CrossRef N.D. Alexopoulos and M. Tiryakioglu (2009) Mater. Sci. Eng. A 507:236–40.CrossRef
34.
35.
go back to reference Y. Estrin and L.P. Kubin (1995) Continuum Models for Materials with Microstructure. Wiley, Chichester, p. 395. Y. Estrin and L.P. Kubin (1995) Continuum Models for Materials with Microstructure. Wiley, Chichester, p. 395.
37.
go back to reference L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697–708.CrossRef L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697–708.CrossRef
38.
39.
go back to reference W.F. Hosford: Mechanical behavior of materials, p. 162, Cambridge University Press, New York, 2005.CrossRef W.F. Hosford: Mechanical behavior of materials, p. 162, Cambridge University Press, New York, 2005.CrossRef
41.
42.
go back to reference S.A. Court, K.M. Gatenby and D. J. Lloyd: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 443–47. S.A. Court, K.M. Gatenby and D. J. Lloyd: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 443–47.
43.
go back to reference N. Yu. Zolotorevsky, A.N. Solonin, A.Yu. Churyum, V.S. Zolotorevsky (2009) Mater. Sci. Eng. A 502:111–17.CrossRef N. Yu. Zolotorevsky, A.N. Solonin, A.Yu. Churyum, V.S. Zolotorevsky (2009) Mater. Sci. Eng. A 502:111–17.CrossRef
44.
go back to reference C.R. Hutchinson, J.D.C. Teixeira, L. Bourgeois: The 11th International Conference on Al Alloys, p. 1647, Wiley-VCH GmbH & Co., Weinheim, 2008. C.R. Hutchinson, J.D.C. Teixeira, L. Bourgeois: The 11th International Conference on Al Alloys, p. 1647, Wiley-VCH GmbH & Co., Weinheim, 2008.
45.
go back to reference A.K. Gupta, D.J. Lloyd, S.A. Court: Mater. Sci. Eng. A, 2001, vol. 316, pp. 11–17.CrossRef A.K. Gupta, D.J. Lloyd, S.A. Court: Mater. Sci. Eng. A, 2001, vol. 316, pp. 11–17.CrossRef
46.
go back to reference J. O. Andersson, T. Helander, L. Höglund, P.F. Shi, B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.CrossRef J. O. Andersson, T. Helander, L. Höglund, P.F. Shi, B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.CrossRef
Metadata
Title
The Influence of Si and Mg Content on the Microstructure, Tensile Ductility, and Stretch Formability of 6xxx Alloys
Authors
Hao Zhong
Paul A. Rometsch
Yuri Estrin
Publication date
01-08-2013
Publisher
Springer US
Published in
Metallurgical and Materials Transactions A / Issue 8/2013
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-013-1740-9

Other articles of this Issue 8/2013

Metallurgical and Materials Transactions A 8/2013 Go to the issue

Premium Partners