Skip to main content
main-content
Top

Journal

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 1-4/2018

Issue 1-4/2018

Table of Contents ( 120 Articles )

16-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Improving the quality of continuously cast slabs: by means of the pinch roll drive of the horizontal part of a continuous casting machine

A. E. Vasiliev, S. I. Lukyanov, O. S. Logunova, A. L. Karyakin

16-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Real-time product quality control system using optimized Gabor filter bank

Şaban Öztürk, Bayram Akdemir

17-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Advance on friction of stamping forming

Gui Li, Xiaoyu Long, Peng Yang, Zhongkai Liang

17-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A next-generation IoT-based collaborative framework for electronics assembly

Rajesh Krishnamurthy, J. Cecil

17-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Optimal riser design method based on geometric reasoning method and fruit fly optimization algorithm in CAD

Tong Wang, Yajun Yin, Jianxin Zhou, Xu Shen, Min Wang

17-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Tool condition monitoring of aluminum oxide grinding wheel using AE and fuzzy model

Felipe Aparecido Alexandre, Wenderson Nascimento Lopes, Fábio R. Lofrano Dotto, Fábio Isaac Ferreira, Paulo Roberto Aguiar, Eduardo Carlos Bianchi, José Cláudio Lopes

18-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Investigation of temperature distribution in orthogonal cutting through dual-zone contact model on the rake face

Esin Cakir, Emre Ozlu, Mustafa Bakkal, Erhan Budak

18-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Development and analysis of energy consumption map for high-speed machining of Al 6061-T6 alloy

Salman Sagheer Warsi, Syed Husain Imran Jaffery, Riaz Ahmad, Mushtaq Khan, Mujtaba Hassan Agha, Liaqat Ali

18-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Technology of ablation milling by fast-moving electrode

Donglei Yang, Mingbo Qiu, Yunxiao Han, Linglei Kong, Weiwei Zhou, Zhidong Liu

18-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Combined machining of SiC/Al composites based on blasting erosion arc machining and CNC milling

Jipeng Chen, Lin Gu, Xiao Liu, Wansheng Zhao

19-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Study of reliability index for high-density polyethylene based on pipe standard dimension ratio and fracture toughness limits

Latifa Alimi, Kamel Chaoui, Abdelaziz Amirat, Salaheddine Azzouz

19-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Prediction of cutting force in five-axis flat-end milling

Z. C. Wei, M. L. Guo, M. J. Wang, S. Q. Li, S. X. Liu

19-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Fabrication and characterization of a bimetallic Al/Cu tube using the tube sinking process

Jalil Salehi, Ahmad Rezaeian, Mohammad Reza Toroghinejad

19-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A staged haptic rendering approach for virtual assembly of bolted joints in mechanical assembly

Jing-Rong Li, Jia-Wu Liu, Qing-Hui Wang, Guang-Hua Hu

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Ultra-precision diamond turning of optical silicon—a review

Lukman N. Abdulkadir, Khaled Abou-El-Hossein, Abubakar I. Jumare, Peter B. Odedeyi, Muhammad M. Liman, Tirimisiyu A. Olaniyan

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Effect of droplet impact on molten pool dynamics in hybrid laser-MIG welding of aluminum alloy

Xuyang Chen, Gang Yu, Xiuli He, Shaoxia Li, Haibin Miao

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Build orientation optimization for additive manufacturing of functionally graded material objects

Prakhar Jaiswal, Jayankumar Patel, Rahul Rai

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Development of a tool-workpiece thermocouple system for comparative study of the cutting temperature when high-speed ultrasonic vibration cutting Ti-6Al-4V alloys with and without cutting fluids

Xiangyu Zhang, Zhenghui Lu, Zhenlong Peng, He Sui, Deyuan Zhang

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Theoretical modeling and analysis for tensioning stress formation mechanism of laser shock tensioning process

Bo Li, Zhankuan Zhang

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Optimum manufacturing parameters in selective laser sintering of PA12 with white cement additives

Saleh Ahmed Aldahash

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A STEP-based machining data model for autonomous process generation of intelligent CNC controller

Wendan Zhu, Tianliang Hu, Weichao Luo, Yan Yang, Chengrui Zhang

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A novel approach for chatter online monitoring using coefficient of variation in machining process

Jian Ye, Pingfa Feng, Chao Xu, Yuan Ma, Shuanggang Huang

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Effect of heat input on failure mode and connection mechanism of parallel micro-gap resistance welding for copper wire

S. Cong, W. W. Zhang, Y. S. Wang, Z. J. Wen, Y. H. Tian

21-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Torsion analysis of the anisotropic behavior of FDM technology

Cesar Omar Balderrama-Armendariz, Eric MacDonald, David Espalin, David Cortes-Saenz, Ryan Wicker, Aide Maldonado-Macias

21-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Die structure and its trial manufacture for thread and spline synchronous rolling process

Da-Wei Zhang

21-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Experimental study on hybrid machining of laser irradiation and grinding for sharpening of a CVD diamond micro-milling tool

Kaihua Yang, Yi Xia, Liang Li, Ning He, Yu Zhang, Tianchun Zhang, Yuqi Wang

22-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Part re-registration during process interruption of electron beam melting additive manufacturing

Mohammad Shojib Hossain, Jorge Mireles, Philip Morton, Yirong Lin, Cesar A. Terrazas, Ryan B. Wicker

22-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Effect of ultrasound vibration on the ejection friction in microinjection molding

Davide Masato, Marco Sorgato, Giovanni Lucchetta

22-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Effects of process parameters on electromagnetic sheet free forming of aluminium alloy

Huijuan Ma, Liang Huang, Jianjun Li, Xuecheng Duan, Fei Ma

22-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Hot compression behavior and microstructure of selectively laser-melted IN718 alloy

Ahmad Mostafa, Davood Shahriari, Ignacio Picazo Rubio, Vladimir Brailovski, Mohammad Jahazi, Mamoun Medraj

22-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Ultrasonic assisted high rotational speed diamond machining of dental glass ceramics

Xiao-Fei Song, Jia-Jun Yang, Hai-Tao Ren, Bin Lin, Yoshitaka Nakanishi, Ling Yin

23-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Analysis-effective induction efficiency of laser in pulse laser-GTA welding of titanium alloy

Liming Liu, Jipeng Shi, Xinkun Xu

23-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Influence of electrochemical micromachining process parameters during fabrication of varactor micropattern

Sandip Kunar, Subrata Mahata, B. Bhattacharyya

23-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Elimination of 3D micro-electrode’s step effect and applying it in micro-EDM

Bin Xu, Xiao-yu Wu, Jian-guo Lei, Hang Zhao, Xiong Liang, Rong Cheng, Deng-ji Guo

23-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Fatigue reliability prediction of rubber parts based on Wöhler diagrams

S. Belkhiria, R. Seddik, A. Atig, R. Ben Sghaier, A. Hamdi, R. Fathallah

23-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Uniform concentrating design and mold machining of Fresnel lens for photovoltaic systems

Xing Gao, Yong Li, Quancun Kong, Qifeng Tan, Chaojiang Li

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

The thermal-mechanical behavior of WTaMoNb high-entropy alloy via selective laser melting (SLM): experiment and simulation

Hang Zhang, Wang Xu, Yunjing Xu, Zhongliang Lu, Dichen Li

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A review on laser beam welding of copper alloys

S. T. Auwal, S. Ramesh, F. Yusof, S. M. Manladan

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Effects of processing parameters on underfill defects in deep penetration laser welding of thick plates

Mingjun Zhang, Kun Tang, Jian Zhang, Cong Mao, Yongle Hu, Genyu Chen

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A novel method towards approximation of the temperature distribution in electric discharge machining of Ti-6Al-4V by up-scaling approach

Hamid Reza Fazli Shahri, Ramezanali Mahdavinejad

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

An adaptive direct slicing method based on tilted voxel of two-photon polymerization

Xu Zheng, Kai Cheng, Xiaoqin Zhou, Jieqiong Lin, Xian Jing

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A Nash bargaining model for flow shop scheduling problem under uncertainty: a case study from tire manufacturing in Iran

Ghasem Safari, Ashkan Hafezalkotob, Mohammad Khalilzadeh

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A novel dynamic contour error estimation and control in high-speed CNC

Shiwei Pi, Qiang Liu, Qitong Liu

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Numerical study on the effect of mechanical properties variability in sheet metal forming processes

P. A. Prates, A. S. Adaixo, M. C. Oliveira, J. V. Fernandes

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Cyber acoustic analysis of additively manufactured objects

Thomas Mativo, Colleen Fritz, Ismail Fidan

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

The feasibility research on shot-peen forming of the novel fiber metal laminates based on aluminum-lithium alloy

Huaguan Li, Wei Zhang, Wei Jiang, Xiaoge Hua, Xunzhong Guo, Xuelong Fu, Jie Tao

24-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Prediction and verification analysis of grinding force in the single grain grinding process of fused silica glass

Yunhua Su, Bin Lin, Zhongchen Cao

25-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Experiment and analytical model of laser milling process in soluble oil

Viboon Tangwarodomnukun, Chaiya Dumkum

25-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

The propagation and accumulation of dimensional shrinkage for ring-to-ring structure in investment casting

Donghong Wang, Anping Dong, Guoliang Zhu, Da Shu, Fei Li

25-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Plastic deformation-based energy consumption modelling for machining

Yue Meng, Lihui Wang, Chen-Han Lee, Wei Ji, Xianli Liu

25-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Three-dimensional oblique cutting model for sub-surface damage analysis in CFRP/Ti stack composite machining

Zhen-yuan Jia, Chen Chen, Fu-ji Wang, Jian-wei Ma, Fan Yang

26-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Material removal mechanism of two-dimensional ultrasonic vibration assisted polishing Inconel718 nickel-based alloy

Tianbiao Yu, Xiaozhe Yang, Jiuhe An, Xiaoming Yu, Ji Zhao

26-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Ultrasound used to guarantee process control in the manufacture of components. A case study

M. A. Jiménez, A. Mexicano, F. García, M. Osorio, I. Garza, A. Azuara, R. Echartea

26-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Thermal processes, microstructure, and mechanical properties near weld toe in double-sided double gas tungsten arc backing welding joint of 10CrNi3MoV steel

Kang Peng, Chunli Yang, Chenglei Fan, Sanbao Lin

26-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Automatic gap tracking during high power laser welding based on particle filtering method and BP neural network

Yan-xi Zhang, De-yong You, Xiang-dong Gao, Suck-Joo Na

27-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A study of the material removal mechanism of polycrystalline diamond in electrical discharge machining based on spectroscopic measurement

Jialin Liu, Fuming Deng, Xuejun Lu, Wenli Deng

29-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Model development for estimating the aging behaviors of gray cast iron (GCI) alloy at different times and temperatures

A. Oyetunji, A. I. Opaluwa

29-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

The influence of Fe2O3 nano-reinforced SAC lead-free solder in the ultra-fine electronics assembly

F. Che Ani, A. Jalar, A. A. Saad, C. Y. Khor, R. Ismail, Z. Bachok, M. A. Abas, N. K. Othman

29-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Additive manufacturing—a revolution in progress? Insights from a multiple case study

Magnus Simons

29-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Influence of cutting parameters on surface hardening of 52100 steel in flat grinding process

Marcelo Oliveira Gomes, Luiz Mauricio Gonçalves Neto, Robson Bruno Dutra Pereira, Carlos Henrique Lauro, Lincoln Cardoso Brandão

29-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Study of temperature field for UVAG of CFRP based on FBG

Tao Chen, Mengli Ye, Yan Deng, Shuliang Liu

29-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Optimization of cutting parameters with a sustainable consideration of electrical energy and embodied energy of materials

Xingzheng Chen, Congbo Li, Yan Jin, Li Li

29-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Enhancement of corrosion protection performance of SUS304/Q235B dissimilar metals lap joint through fiber laser

Jiang-Zhe Liu, Lin-Jie Zhang, Han-Xin Yang, Miao-Xia Xie, Xiang-Tao Shang, Jian-Xun Zhang

30-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Development and trend of condition monitoring and fault diagnosis of multi-sensors information fusion for rolling bearings: a review

Zhihe Duan, Tonghai Wu, Shuaiwei Guo, Tao Shao, Reza Malekian, Zhixiong Li

30-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Tool runout and single-edge cutting in micro-milling

Xiang Zhang, Xudong Pan, Guanglin Wang, Dong Zhou

31-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

RCSA-based prediction of chatter stability for milling process with large axial depth of cut

Zhongqun Li, Zhikang Wang, Xiaofang Shi, Wen Li

31-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

High-pressure water-jet-assisted machining of Ti555-3 titanium alloy: investigation of tool wear mechanisms

Y. Ayed, G. Germain

31-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Grinding performance of a new micro-crystalline corundum wheel when form-grinding automobile gears

Lijun Yang, Long Wang, Qian Liu, Xinli Tian

01-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Adaptive process control of wire and arc additive manufacturing for fabricating complex-shaped components

Fang Li, Shujun Chen, Zhaoyang Wu, Zhihong Yan

01-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018 Open Access

Colour quality of facial prostheses in additive manufacturing

Ali Sohaib, Kinjiro Amano, Kaida Xiao, Julian M. Yates, Charles Whitford, Sophie Wuerger

01-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Experimental investigation on cross wedge rolling of composite 42CrMo/Q235 laminated shaft

Baoshou Sun, Jingyu Xu, Wenfei Peng, Xuedao Shu, Anmin Yin, Guangxin Huang

01-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Inverse analysis of the cutting force in laser-assisted milling on Inconel 718

Yixuan Feng, Yu-Ting Lu, Yu-Fu Lin, Tsung-Pin Hung, Fu-Chuan Hsu, Chiu-Feng Lin, Ying-Cheng Lu, Steven Y. Liang

02-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Modular recycling supply chain under uncertainty: a robust optimisation approach

Shahrooz Shahparvari, Prem Chhetri, Caroline Chan, Hossein Asefi

02-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Finite element analysis of TC17 Ti alloy under high-speed cutting based on its friction model of deformation zone

Zhang Ping, Wang Youqiang, Liu Wenhui

03-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Exploitation of a novel thermo-invariant multi-feature bar for high-precision CMMs and machine tool testing

F. Viprey, H. Nouira, S. Lavernhe, C. Tournier

03-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Investigation on flow field of ultrasonic-assisted abrasive waterjet using CFD with discrete phase model

Zhe Lv, Rongguo Hou, Yebing Tian, Chuanzhen Huang, Hongtao Zhu

03-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Novel strategies to reduce the springback for double-sided incremental forming

Hongyan Wang, Runfeng Zhang, Huan Zhang, Qi Hu, Jun Chen

03-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Hydroabrasive disintegration of rotating Monel K-500 workpiece

Ján Cárach, Sergej Hloch, Jana Petrů, Akash Nag, Miroslav Gombár, Monika Hromasová

03-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Development of injection molding tooling with conformal cooling channels fabricated by optimal process parameters

Chil-Chyuan Kuo, Zheng-Yan You

04-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Measurement of directional anisotropy coefficients for AA7020-T6 tubes and prediction of forming limit curve

F. Mousavi, R. Hashemi, R. Madoliat

04-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Study on the evolution of residual stress in successive machining process

Yuan Ma, Jianfu Zhang, Pingfa Feng, Dingwen Yu, Chao Xu

05-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A shrinkage prediction method of investment casting based on geometric parameters

Guo-liang Tian, Kun Bu, Dan-qing Zhao, Ya-li Zhang, Fei Qiu, Xian-dong Zhang, Shuai-jun Ren

05-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Investigation of dimensional accuracy in forming of metallic bipolar plates with serpentine flow field

Majid Elyasi, Hossein Talebi Ghadikolaee, Morteza Hosseinzadeh

05-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Dissimilar metal welding of Ti6Al4V and Inconel 718 through pulsed laser welding-induced eutectic reaction technology

Xiao-Long Gao, Jing Liu, Lin-Jie Zhang

05-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Machining behaviors of vibration-assisted electrical arc machining of W9Mo3Cr4V

Guang Zhu, Min Zhang, Qinhe Zhang, ZhenChao Song, Kan Wang

06-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Trade-off between process scheduling and production cost in cyclic flexible robotic cells

Mazyar Ghadiri Nejad, Seyed Mahdi Shavarani, Béla Vizvári, Reza Vatankhah Barenji

06-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Toward the optimal selective maintenance for multi-component systems using observed failure: applied to the FMS study case

Mohamed Ali Kammoun, Nidhal Rezg

06-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Multi-responses optimization in dry turning of a stainless steel as a key factor in minimum energy

Salem Abdullah Bagaber, Ahmad Razlan Yusoff

07-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Molecular dynamics simulation and experiment research of cutting-tool wear mechanism for cutting aluminum alloy

Guojun Dong, Xin Wang, Shengdong Gao

07-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Characteristics of drawing process of AA5182 aluminum alloy sheet during rubber-pad forming

Junrui Xu, Jing Zhang, Junjia Cui, Xu Zhang

07-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Digital twin-based smart production management and control framework for the complex product assembly shop-floor

Cunbo Zhuang, Jianhua Liu, Hui Xiong

07-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Effect of rolling passes on thermal parameters and microstructure evolution via ring-rolling process of GH4738 superalloy

Yang Hu, Dong Liu, Xinglin Zhu, Yanhui Yang, Jianguo Wang, Haiping Wang

07-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Vibratory finishing co-simulation based on ADAMS-EDEM with experimental validation

Xiuzhi Wang, Shengqiang Yang, Wenhui Li, Yanqing Wang

07-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Tensile behavior in selective laser melting

Cesar Ortiz Rios, Tarak Amine, Joseph W. Newkirk

08-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Multi-objective process route optimization considering carbon emissions

Guang-hui Zhou, Chang-le Tian, Jun-jie Zhang, Feng-tian Chang, Qi Lu

08-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Effects of different chamfered cutting edges of micro end mill on cutting performance

Peng Gao, Zhiqiang Liang, Xibin Wang, Shidi Li, Tianfeng Zhou

08-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Mechanical surface treatments to optimize the fatigue behavior of quenched and tempered high strength steels

E. Segurado, F. J. Belzunce, I. Fernández Pariente

09-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Orbital friction stir lap welding of AA5456-H321/AA5456-O aluminum alloys under varied parameters

V. Ebrahimzadeh, M. Paidar, M. A. Safarkhanian, O. Oladimeji Ojo

09-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Study on surface modification of aluminum 6061 by multiple ultrasonic impact treatments

Liang Li, Miru Kim, Seungjun Lee, Jongman Kim, Hyunse Kim, Deugwoo Lee

09-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Applying multivariate analysis to analyze and improve component rejection by pick and place machines

Chien-Yi Huang

10-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A robust and self-tuning speed control for permanent magnet synchronous motors via meta-heuristic optimization

Lucio Ciabattoni, Francesco Ferracuti, Gabriele Foresi, Alessandro Freddi, Andrea Monteriù, Daniele Proietti Pagnotta

10-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Predictive cutting force model for a cryogenic machining process incorporating the phase transformation of Ti-6Al-4V

Do Young Kim, Dong Min Kim, Hyung Wook Park

10-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Design and wear analysis of tool for high-efficiency disk milling roughing of aero-engine blisk channels

Yaonan Cheng, Jinlong Yang, Tianqi Chen, Ming Xu

11-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Electric discharge machining of titanium and its alloys: review

Jaber E. Abu Qudeiri, Abdel-Hamed I. Mourad, Aiman Ziout, Mustufa Haider Abidi, Ahmed Elkaseer

12-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

A sample average approximation algorithm for selective disassembly sequencing with abnormal disassembly operations and random operation times

Hyung-Won Kim, Dong-Ho Lee

12-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Effect of inter layer idle time on thermal behavior for multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing

Yangyang Lei, Jun Xiong, Rong Li

12-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Influence of pulse waveform on machining accuracy in electrochemical machining

Wei Chen, Fuzhu Han, Junhua Wang

12-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Evaluating the effects of as-casted and aged overcasting of Al-Al joints

Muhammad Asad Ali, Mirza Jahanzaib, Ahmad Wasim, Salman Hussain, Nazeer Ahmad Anjum

12-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Study on distribution characteristics of diamond particles under high-voltage electrostatic field

Fengjun Chen, Lei Zhang, Shaohui Yin, Shuai Huang, Qingchun Tang

13-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

The micro-cutting performance of cermet and coated WC micro-mills in machining of TC4 alloy micro-grooves

Yishun Wang, Bin Zou, Chuanzhen Huang, Zhanqiang Liu, Peng Yao

13-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Prediction of flexible cutting forces and tool deflections for general micro end mill considering tool run-out and deflection feedback

Lin Zhou, Cencen Yang, Fangyu Peng, Rong Yan, Ben Deng, Ming Liu

13-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Investigation of wire electric discharge machining of stainless-clad steel for optimization of cutting speed

Kashif Ishfaq, Nadeem Ahmad Mufti, Mohammad Pervez Mughal, Muhammad Qaiser Saleem, Naveed Ahmed

13-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Cutting force and surface roughness depend on the tool path used in side milling: an experimental investigation

Rodrigo Henriques Lopes da Silva, Amauri Hassui

13-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Investigation on the generation of the waviness errors along feed-direction on flycutting surfaces

Chenhui An, Congying Deng, Jianguo Miao, Deping Yu

13-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

An experimental investigation into the defects of laser-drilled holes in thermal barrier coated Inconel 718 superalloys

Rujia Wang, Kedian Wang, Xia Dong, Zhengjie Fan, Wenqiang Duan, Xuesong Mei, Wenjun Wang, Jianlei Cui, Shuai Zhang

13-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Investigation on initial grain size and laser power density effects in laser shock bulging of copper foil

Chao Zheng, Xiu Zhang, Zheng Liu, Zhong Ji, Xiao Yu, Libin Song

13-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Impact of shoulder concavity on non-tool-tilt friction stir welding of 5052 aluminum alloy

H. J. Zhang, M. Wang, Z. Zhu, X. Zhang, T. Yu, Z. Q. Wu

14-02-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

Dynamic simulation of powder packing structure for powder bed additive manufacturing

Y. S. Lee, P. Nandwana, W. Zhang

20-01-2018 | ORIGINAL ARTICLE | Issue 1-4/2018

An improved adaptive sampling strategy for freeform surface inspection on CMM

Gaiyun He, Yicun Sang, Kairui Pang, Guangming Sun

27-02-2018 | Correction | Issue 1-4/2018

Correction to: An improved adaptive sampling strategy for freeform surface inspection on CMM

Gaiyun He, Yicun Sang, Kairui Pang, Guangming Sun

Current Publications

Premium Partner

    Image Credits