Skip to main content
main-content
Top

Journal

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 1-4/2019

Issue 1-4/2019

Table of Contents ( 82 Articles )

18-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019

Prospects for using T-splines for the development of the STEP-NC-based manufacturing of freeform surfaces

Gang Zhao, Oleksandr Zavalnyi, Yazui Liu, Wenlei Xiao

18-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019

Research on multi-roll roll forming process of thick plate

Yan Wang, Xinqing Zhu, Qiang Wang, Ximin Cui

19-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019

Sustainable machining as a mean of reducing the environmental impacts related to the energy consumption of the machine tool: a case study of AISI 1045 steel machining

Carmita Camposeco-Negrete, Juan de Dios Calderón-Nájera

19-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019

Investigating the effect of carbon steel STKM 13a thermal and electrical properties during welding assembly of the lower brackets of a rail car

Ilesanmi Afolabi Daniyan, Khumbulani Mpofu, Adefemi Omowole Adeodu

19-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019

Investigating the effects of external magnetic field on machining characteristics of electrical discharge machining process, numerically and experimentally

Mohammad Reza Shabgard, Ahad Gholipoor, Mousa Mohammadpourfard

19-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019

Deburring of complex-shaped drilling intersections: a numerical method for modelling the tool path

Klaus Schützer, Eberhard Abele, Adrian Meinhard, Julia Donnelly

19-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019

A cascading fuzzy logic with image processing algorithm–based defect detection for automatic visual inspection of industrial cylindrical object’s surface

Mohammed A. H. Ali, Au Kai Lun

19-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019

On the quality and integrity of broached surfaces

A. Hosseini

22-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019 Open Access

High-strength steel S960QC welded with rare earth nanoparticle coated filler wire

Cyril Vimalraj, Paul Kah, Pavel Layus, Eric Mvola Belinga, Sergey Parshin

26-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019 Open Access

An accelerated springback compensation method for creep age forming

Yong Li, Qi Rong, Zhusheng Shi, Xiaoguang Sun, Lichun Meng, Jianguo Lin

28-12-2018 | ORIGINAL ARTICLE | Issue 1-4/2019

Modeling and multi-objective optimization for minimizing surface roughness, cutting force, and power, and maximizing productivity for tempered stainless steel AISI 420 in turning operations

Abderrahmen Zerti, Mohamed Athmane Yallese, Ikhlas Meddour, Salim Belhadi, Abdelkrim Haddad, Tarek Mabrouki

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Aggregate production planning under uncertainty: a comprehensive literature survey and future research directions

Aboozar Jamalnia, Jian-Bo Yang, Ardalan Feili, Dong-Ling Xu, Gholamreza Jamali

23-01-2019 | Correction | Issue 1-4/2019

Correction to: Aggregate production planning under uncertainty: a comprehensive literature survey and future research directions

Aboozar Jamalnia, Jian-Bo Yang, Ardalan Feili, Dong-Ling Xu, Gholamreza Jamali

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

A multi-source similar subparts based NC process fusion and regrouping approach

Changhong Xu, Shusheng Zhang, Zhanying Feng, Liu Zhang, Renche Wang

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

An initial point alignment method of narrow weld using laser vision sensor

Junfeng Fan, Fengshui Jing, Lei Yang, Teng Long, Min Tan

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

An intelligent CNC controller using cloud knowledge base

Wenbin Gao, Chengrui Zhang, Tianliang Hu, Yingxin Ye

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Comprehensive characterization and material modeling for ceramic injection molding simulation performance validations

Guido Tosello, David Maximilian Marhöfer, Aminul Islam, Tobias Müller, Klaus Plewa, Volker Piotter

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Minimizing drum-shaped inaccuracy in high-speed wire electrical discharge machining after multiple cuts

Cong Deng, Zhidong Liu, Ming Zhang, Yichao Ji, Hongwei Pan

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Modal identification of a machine tool structure during machining operations

Asia Maamar, Thien-Phu Le, Vincent Gagnol, Laurent Sabourin

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

A study on the control strategies of a series–parallel hybrid platform for blade polishing

Qiuwei He, Ji Zhao, Mei Feng, Chaopeng Zhang, Hangde Chen

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Modeling of cutting forces in curvilinear peripheral milling process

Haikel Mejri, Kamel Mehdi

02-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Experimental analysis of electro-assisted warm spin forming of commercial pure titanium components

Kai Jin, Jianhua Wang, Xunzhong Guo, Joseph Domblesky, Hui Wang, Xia Jin, Runze Ding

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Prediction of surface roughness in milling process using vibration signal analysis and artificial neural network

T. Y. Wu, K. W. Lei

15-02-2019 | Correction | Issue 1-4/2019 Open Access

Correction to: Prediction of surface roughness in milling process using vibration signal analysis and artificial neural network

T. Y. Wu, K. W. Lei

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Micro-machining with abrasive slurry-jets: effects of dissolved polymer concentration and nozzle design

E. van Wijk, D. F. James, M. Papini, J. K. Spelt

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Application of a wheel cleaning system during grinding of alumina with minimum quantity lubrication

José C. Lopes, Carlos E. H. Ventura, Lucas de M. Fernandes, André B. Tavares, Luiz E. A. Sanchez, Hamilton J. de Mello, Paulo R. de Aguiar, Eduardo C. Bianchi

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Experiment investigation of using wire electrochemical machining in deionized water to reduce the wire electrical discharge machining surface roughness

Xiaoyu Wu, Shujuan Li, Wen Zhao, Lin Tang, Zhipeng Li

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

A dynamic ant-colony genetic algorithm for cloud service composition optimization

Yefeng Yang, Bo Yang, Shilong Wang, Feng Liu, Yankai Wang, Xiao Shu

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Optimization of parameters for micro friction stir welding of aluminum 5052 using Taguchi technique

Yasir Sagheer-Abbasi, Shahid Ikramullah-Butt, Ghulam Hussain, Syed Husain Imran, Atif Mohammad-Khan, Raja Abdul Baseer

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

The effects of back-plate support and welded metal type on the characteristics of joints produced by magnetic pulse welding

M. A. Moghaddas, A. Abdollah-zadeh, M. Hajian

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Residual stress prediction in laser-assisted milling considering recrystallization effects

Yixuan Feng, Tsung-Pin Hung, Yu-Ting Lu, Yu-Fu Lin, Fu-Chuan Hsu, Chiu-Feng Lin, Ying-Cheng Lu, Steven Y. Liang

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Experimental investigation and thermo-mechanical modelling for tool life evaluation of photopolymer additively manufactured mould inserts in different injection moulding conditions

Ali Davoudinejad, Mohamad Bayat, David Bue Pedersen, Yang Zhang, Jesper Henri Hattel, Guido Tosello

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Cutting edge element modeling-based cutter-workpiece engagement determination and cutting force prediction in five-axis milling

Xianyin Duan, Fangyu Peng, Zerun Zhu, Guozhang Jiang

03-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Research on milling stability of thin-walled parts based on improved multi-frequency solution

Boling Yan, Lida Zhu

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Investigation on the effect of mandrels on hollow shafts in cross-wedge rolling

Xu Huang, Baoyu Wang, Yanhong Mu, Jinxia Shen, Junling Li, Jing Zhou

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

A thermo-mechanical model for simulating the temperature and stress distribution during laser cladding process

Zhe Zhang, Radovan Kovacevic

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

A novel material modeling technique in the single-point incremental forming assisted by the ultrasonic vibration of low carbon steel/commercially pure titanium bimetal sheet

M. R. Sakhtemanian, M. Honarpisheh, S. Amini

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Research on the matching relationship between ultrasonic-assisted grinding parameters and workpiece surface roughness

Siyuan Sun, Jinyuan Tang, Wen Shao, Changshun Chen, Yaoxi Liu

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Effect of the pressure on fracture behaviors of metal sheet punched by laser-induced shock wave

Min Li, Xingquan Zhang, Shengzhi Li, Huiting Wang, Bin Chen, Jinyu Tong, Guangwu Fang, Wei Wei

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Fiber orientations effect on process performance for wire cut electrical discharge machining (WEDM) of 2D C/SiC composite

Wenbin He, Shaotai He, Jinguang Du, Wuyi Ming, Jun Ma, Yang Cao, Xiaoke Li

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

The coupling effect and damage analysis when drilling GFRP laminates using candlestick drills

Jing Tian, Feng Wu, Pengpeng Zhang, Bin Lin, Tianshu Liu, Liping Liu

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Theoretical modeling for the exit-delamination morphology of the unidirectional CFRPs

Fei Su, Lei Zheng, Fujian Sun, Zhaohui Deng, Xinyi Qiu

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

A general model to estimate hole location deviation in drilling: the contribution of three error sources

Wilma Polini, Andrea Corrado

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Research on shaping law in electrochemical machining for the leading/trailing edge of the blade

Dong Zhu, Lingguo Yu, Jibin Zhao, Jia Liu, Zhengyang Xu

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Equivalent parameters-based residual thermal stress fields modeling and design for square coated indexable cutting inserts

Fengyun Wang, Kuanmin Mao, Hua Ying, Yamin Zhu, Ling Yin

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Study on the effect of force-thermal coupling error on the gear hobbing accuracy and its visualization

Xianguang Li, Yong Yang, Zheng Zou, Feng Deng, Li Wang, Qian Tang

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Experimental research on micro-milling force of a single-crystal nickel-based superalloy

Qi Gao, Xueye Chen

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Trajectory planning of abrasive belt grinding for aero-engine blade profile

Zhi Huang, Rui Song, Congbao Wan, Pengxuan Wei, Hongyan Wang

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Investigating the design and process parameters of folded perforated sheet metal

Muhammad Ali Ablat, Ala Qattawi

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Fuzzy multi-objective optimization for multi-site integrated production and distribution planning in two echelon supply chain

Gaurav Kumar Badhotiya, Gunjan Soni, M. L. Mittal

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Generating spiral tool path to machine free-form surface with complex topology based on fusing constraint mapping and enriched Voronoi diagram

Zhiping Liu, Xiongbing Li, Bing Yi

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

The mechanical analysis of flexible die drawing for spherical parts based on weight function

Xiang-dong Jia, Chang-cai Zhao

04-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Electric arc sweep milling of open channels

Ahmad Farhadi, Yingmou Zhu, Lin Gu, Wansheng Zhao

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Isothermal closed-die forming process of magnesium alloy upper receiver: numerical simulation and experiments

Qiang Chen, Xiaohua Zhang, Jun Lin, Hong Zhan, Zude Zhao, Zhiwen Xie, Baoguo Yuan

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Arc discharge and pressure characteristics in pulsed plasma gas of PAW

Shujun Chen, Zhaoyang Yan, Fan Jiang

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

A unified prediction model of 3D surface topography in face milling considering multi-error sources

Sun Jin, Shun Liu, Xueping Zhang, Kun Chen

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

The experimental investigation of water jet–guided laser cutting of CFRP

Dong Sun, Fuzhu Han, Weisheng Ying

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

A molecular dynamics simulation of wear mechanism of diamond tool in nanoscale cutting of copper beryllium

A. Sharma, D. Datta, R. Balasubramaniam

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Multi-step approach for automated scaling of photogrammetric micro-measurements

A. Frangione, A. J. Sanchez Salmeron, F. Modica, G. Percoco

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Multi-response parametric optimization of squeeze casting process for fabricating Al 6061-SiC composite

Muhammad Hassan Sarfraz, Mirza Jahanzaib, Wasim Ahmed, Salman Hussain

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Numerical investigation on plastic forming for heat transfer tube consisting of both dimples and protrusions

Zheng Liang, Shuai Xie, Jie Zhang, Liang Zhang, Yulin Wang, Hu Ding

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Comprehensive investigation of surface quality and mechanical properties in CO2 laser drilling of GFRP composites

Ali Solati, Mohsen Hamedi, Majid Safarabadi

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Reduction of geometric deviation by multi-pass incremental forming combined with tool path compensation for non-axisymmetric aluminum alloy component with stepped feature

Peipei Dai, Zhidong Chang, Meng Li, Jun Chen

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Influence of hot isostatic pressing on structure and properties of titanium cold-spray deposits

P. Petrovskiy, A. Sova, M. Doubenskaia, I. Smurov

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Incremental forming characteristics of hollow parts with grooves

Xunzhong Guo, Cheng Wang, Yong Xu, Ali Abd El-Aty, Shi-Hong Zhang

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Research on the double-sided incremental forming toolpath planning and generation based on STL model

Hu Zhu, Dongxuan Xiao, Jaeguan Kang

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Effects of pulse phase difference on metal transfer process and weld formation in the integrated circular triple-electrode GMAW

T. Xiang, H. Li, Y. Gao, S. Y. Zhao, L. Y. Lou, H. Wang

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Deformation behavior of saddle surface part during multi-point forming under normally full constraint condition

Bin-Bin Jia, Wei-Wei Wang, ShiJian Yuan

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Robot automation grinding process for nuclear reactor coolant pump based on reverse engineering

Hongyao Zhang, Lun Li, Jibin Zhao

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Novel epoxy-carbonized coconut shell nanoparticles composites for car bumper application

J. O. Agunsoye, A. K. Odumosu, O. Dada

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Energy efficiency evaluation of metal laser direct deposition based on process characteristics and empirical modeling

Wen Liu, Haiying Wei, Chu Huang, Fengbo Yuan, Yi Zhang

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Analysis of forming error during thread and spline synchronous rolling process based on motion characteristic

Da-Wei Zhang, Sheng-Dun Zhao, Yong-Dong Bi

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Research on forming process and forming accuracy using low-melting alloys for sheet metal forming based on FEA

Liyan Wang, Mingzhe Li, Liang Zhao, Zhuo Yi

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Feasibility analysis of hot incremental sheet forming process on thermoplastics

Giuseppina Ambrogio, Francesco Gagliardi, Romina Conte, Pietro Russo

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Effect of magnetic field on the electrochemical machining localization

Lilong, Ma Baoji, Peiyong Cheng, Kang Yun, Peili Yin

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Toward the temperature distribution on ball bearing inner rings during single-grit grinding

Guangwei Yu, Qing Wang, Zhuoyuan Song, Dangsheng Fang, Yinwei Li, Yuan Yao

05-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Effects of deposition variables on molten pool temperature during laser engineered net shaping of Inconel 718 superalloy

Zhichao Liu, Tao Li, Fuda Ning, Weilong Cong, Hoyeol Kim, Qiuhong Jiang, Hongchao Zhang

06-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Optimization of processing parameters and surface roughness of metallic sheets plastically deformed by incremental forming process

Mariem Dakhli, Atef Boulila, Pierre-Yves Manach, Zoubeir Tourki

06-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Heat distribution in electric hot incremental sheet forming

P. A. P. Pacheco, M. E. Silveira, J. A. Silva

06-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

Investigation of applying protective sheet metal die covers for hot forging dies on a cross-forging geometry

Yingyan Yu, Juliana Zottis, Martin Wolfgarten, Gerhard Hirt

06-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019 Open Access

Multi-state decision of unreliable machines for energy-efficient production considering work-in-process inventory

Junfeng Wang, Zicheng Fei, Qing Chang, Shiqi Li, Yan Fu

07-01-2019 | ORIGINAL ARTICLE | Issue 1-4/2019

A new Bio-CAD system based on the optimized KPCA for relevant feature selection

Syrine Neffati, Khaoula Ben Abdellafou, Okba Taouali, Kais Bouzrara

Current Publications

Premium Partner

    Image Credits