Skip to main content
main-content
Top

Journal

The International Journal of Advanced Manufacturing Technology

The International Journal of Advanced Manufacturing Technology 9-12/2019

Issue 9-12/2019

Table of Contents ( 120 Articles )

06-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

μED milling of Ti-6Al-4V using cryogenic-treated Wc tool and nano-graphene powder-mixed dielectricat different discharge energy regimes

K. V. Arun Pillai, P. Hariharan, J. M. Jafferson

06-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Assembly sequence plan generation of heavy machines based on the stability criterion

Akram Bedeoui, Riadh Ben Hadj, Moncef Hammadi, Moez Trigui, Nizar Aifaoui

06-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Characterization of the chips generated by the nanomachining of germanium for X-ray crystal optics

Zdenko Zápražný, Dušan Korytár, Matej Jergel, Yuriy Halahovets, Mário Kotlár, Igor Maťko, Jakub Hagara, Peter Šiffalovič, Jozef Kečkéš, Eva Majková

06-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Rapid electrolyte wetting of lithium-ion batteries containing laser structured electrodes: in situ visualization by neutron radiography

Jan Bernd Habedank, Florian J. Günter, Nicolas Billot, Ralph Gilles, Tobias Neuwirth, Gunther Reinhart, Michael F. Zaeh

06-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Mechanical property of FDM printed ABS: influence of printing parameters

M. Samykano, S. K. Selvamani, K. Kadirgama, W. K. Ngui, G. Kanagaraj, K. Sudhakar

06-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Comparison of between direct and peck drilling for large aspect ratio in Ti-6Al-4V alloy

Abdelkrem Eltaggaz, Ibrahim Deiab

06-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Evaluation of surface topography of SiCp/Al composite in grinding

Chuanmin Zhu, Peng Gu, Dinghao Liu, Xiao Hu, Yinyue Wu

06-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

An efficient tapered tool having multiple blades for manufacturing cylindrical gears with power skiving

Erkuo Guo, Naifei Ren, Xudong Ren, Chenxi Liu

07-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Millisecond fibre laser trepanning drilling of angular holes

S. Marimuthu, M. Antar, J. Dunleavey, P. Hayward

07-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A review on dissimilar metals’ welding methods and mechanisms with interlayer

Yongjian Fang, Xiaosong Jiang, Defeng Mo, Degui Zhu, Zhiping Luo

07-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Inverse identification of Johnson-Cook material constants based on modified chip formation model and iterative gradient search using temperature and force measurements

Jinqiang Ning, Steven Y. Liang

07-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts

Zengguang Liu, Yanqing Wang, Beicheng Wu, Chunzhi Cui, Yu Guo, Cheng Yan

07-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Impact of surface machining complexity on energy consumption and efficiency in CNC milling

Junhua Zhao, Li Li, Yue Wang, John W. Sutherland

07-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Effect of microstructure and precipitation phenomena on the mechanical behavior of AA6061-T6 aluminum alloy weld

Maamar Hakem, Soltane Lebaili, Stephane Mathieu, Djamel Miroud, Abdelatif Lebaili, Billel Cheniti

07-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

The effect of beam oscillations on the microstructure and mechanical properties of electron beam welded steel joints

Krishna Komerla, Stefan Gach, Thomas Vossel, Alexander Schwedt, Andreas Bührig-Polaczek, Uwe Reisgen, Wolfgang Bleck

07-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Flexibility improvement in two-point incremental forming by implementing multi-point die

Amir Ali Nourmohammadi, Majid Elyasi, Mohammad Javad Mirnia

08-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Investigation of performance and cutting properties of carbide tool with nanostructured multilayer Zr-ZrN-(Zr0.5,Cr0.3,Al0.2)N coating

Alexey Vereschaka, Sergey Grigoriev, Nikolay Sitnikov, Filipp Milovich, Anatoliy Aksenenko, Nikolay Andreev

08-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Identification of inherent position-independent geometric errors for three-axis machine tools using a double ballbar with an extension fixture

Seung-Han Yang, Hoon-Hee Lee, Kwang-Il Lee

08-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A thermomechanical analysis leading to a novel flank face design providing longer tool lives for tools used in the drilling of Inconel 718

Ekrem Oezkaya, Milan Bücker, Simon Strodick, Dirk Biermann

08-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Virtual bead representation and surface roughness evaluation challenges for additive manufacturing material extrusion processes

R. J. Urbanic, L. DiCecco

09-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

High-performance graphene-based heaters fabricated using maskless ultraviolet laser patterning

Shih-Feng Tseng, Pi-Ying Cheng, Wen-Tse Hsiao, Ming-Fu Chen, Chien-Kai Chung, Po-Han Wang

09-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Low-pressure plasma treatment of CFRP substrates for epoxy-adhesive bonding: an investigation of the effect of various process gases

M. Pizzorni, E. Lertora, C. Gambaro, C. Mandolfino, M. Salerno, M. Prato

09-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Research on bending forming method of large diameter-thickness ratio thin-walled tubes for aerospace

Lanfang Jiang, Shuyou Zhang, Yaqun Wang, Yixiong Feng, Yaochen Lin, Hong Liu, Fei Zhang, Hong Shao

09-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Toolpath generation for partition machining of T-spline surface based on local refinement

Yazui Liu, Gang Zhao, Oleksandr Zavalnyi, Wenlei Xiao

11-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Study of friction stir butt welding between thin plates of AA5754 and mild steel for automotive applications

P. N. Karakizis, D. I. Pantelis, D. A. Dragatogiannis, V. D. Bougiouri, C. A. Charitidis

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Identification and compensation of position-dependent geometric errors of rotary axes on five-axis machine tools by using a touch-trigger probe and three spheres

Yu-Ta Chen, Pruthvikumar More, Chien-Sheng Liu, Chih-Chun Cheng

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A manufacturing cost analysis framework to evaluate machining and fused filament fabrication additive manufacturing approaches

R. J. Urbanic, S. M. Saqib

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A comparative study of analytical thermal models to predict the orthogonal cutting temperature of AISI 1045 steel

Jinqiang Ning, Steven Y. Liang

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Integration of tool error identification and machining accuracy prediction into machining compensation in flank milling

Hangzhuo Yu, Shengfeng Qin, Guofu Ding, Lei Jiang, Lei Han

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A convex programming approach to the base placement of a 6-DOF articulated robot with a spherical wrist

Seung-Woo Son, Dong-Soo Kwon

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Crack resistance enhancement of joint bar holes by slide diamond burnishing using new tool equipment

J. T. Maximov, G. V. Duncheva, A. P. Anchev, V. P. Dunchev

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Multi-objective and many objective design of plastic injection molding process

Alejandro Alvarado-Iniesta, Oliver Cuate, Oliver Schütze

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Improving surface integrity and surface roughness by forming multi-discharging channels from one pulse in EDM

Xin Mu, Ming Zhou, Qing Ye

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A high-speed precision micro-spindle use for mechanical micro-machining

Wei Li, Mingjia Liu, YingHui Ren, Qidi Chen

12-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Manufacturing poly(lactic acid)/metal composites and their characterization

Sergey M. Lebedev

13-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Multi-focusing algorithm for microscopy imagery in assembly line using low-cost camera

Lukas Juočas, Vidas Raudonis, Rytis Maskeliūnas, Robertas Damaševičius, Marcin Woźniak

13-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Simulation and analysis of the jet flow patterns from supersonic nozzles of laser cutting using OpenFOAM

Mohamed Darwish, Leonardo Orazi, Diego Angeli

13-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Observations on developing reliability information utilization in a manufacturing environment with case study: robotic arm manipulators

Michael Sharp

13-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Investigations of sheet metal forming by vaporizing metal foils

S. Cai

13-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Powder metallurgy of stainless steels and composites: a review of mechanical alloying and spark plasma sintering

Samuel Ranti Oke, Oladeji Oluremi Ige, Oluwasegun Eso Falodun, Avwerosuoghene M. Okoro, Mahlatse R. Mphahlele, Peter Apata Olubambi

13-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

New hot isostatic pressing (HIP) simulation method with taking into account of the operating cycle ramp

L. Redouani, S. Boudrahem, S. Alem

13-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Assessing process capability index using sampling plan in the presence of measurement system errors

Adel Brik, Mohamed Goddi, Jamel Dhahri, Nabil Ben Fredj

14-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019 Open Access

Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting

Quanquan Han, Yang Jiao

14-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Supply chain implications of additive manufacturing: a holistic synopsis through a collection of case studies

Simone Zanoni, Milad Ashourpour, Andrea Bacchetti, Massimo Zanardini, Marco Perona

14-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Experimental study of a specially designed diamond micro discontinuous grinding tool

Xuelong Wen, Jun Cheng

14-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Methods for determination of low-cycle properties from monotonic tensile tests of 1.2344 steel applied for hot forging dies

Joanna Wollmann, Andrzej Dolny, Marcin Kaszuba, Zbigniew Gronostajski, Maik Gude

15-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Stencil printing process performance on various aperture size and optimization for lead-free solder paste

M. S. Rusdi, M. Z. Abdullah, S. Chellvarajoo, M. S. Abdul Aziz, M. K. Abdullah, P. Rethinasamy, Sivakumar Veerasamy, Damian G. Santhanasamy

15-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Review on strategies for geometric accuracy improvement in incremental sheet forming

Haibo Lu, Hui Liu, Chenhao Wang

18-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Research on the combined electrochemical machining and electrical discharge machining technology for closed integer impeller

L. Tang, X. Feng, T. Q. Huang, J. Liu, J. J. Zhang, Q. B. Lei, Z. Wang

18-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Cutting performance and crack self-healing mechanism of a novel ceramic cutting tool in dry and high-speed machining of Inconel 718

Bin Zhao, Hanlian Liu, Chuanzhen Huang, Jun Wang, Bo Wang, Yao Hou

18-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Effect of Luffa cylindrica fiber and particulate on the mechanical properties of epoxy

C. C. Daniel-Mkpume, C. Ugochukwu, E. G. Okonkwo, O. S. I. Fayomi, S. M. Obiorah

18-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Metal cutting simulations using smoothed particle hydrodynamics on the GPU

M. Röthlin, H. Klippel, M. Afrasiabi, K. Wegener

18-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Equal channel angular sheet extrusion (ECASE) as a precursor of heterogeneity in an AA6063-T6 alloy

Jairo Alberto Muñoz, Oscar Fabián Higuera, Vanina Tartalini, Pablo Risso, Martina Avalos, Raúl E. Bolmaro

18-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A systematic review of design for X techniques from 1980 to 2018: concepts, applications, and perspectives

Abla Chaouni Benabdellah, Imane Bouhaddou, Asmaa Benghabrit, Oussama Benghabrit

19-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Experimental investigation on micro-grinding of SiCp/Al metal matrix composites

Guoqiang Yin, Dong Wang, Jun Cheng

19-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Experimental study of inverted drilling Al-7075 alloy

Jin-Yih Kao, Chun-Yao Hsu, Chung-Chen Tsao

19-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Micro-scaled plastic deformation behavior of biodegradable AZ80 magnesium alloy: experimental and numerical investigation

N. Srinivasan, D. Rajenthirakumar, R. Sridhar

19-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Iterative NC program modification and energy saving for a CNC machine tool feed drive system with linear motors

Yogi Muldani Hendrawan, Abdallah Farrage, Naoki Uchiyama

19-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Study on characteristics in high-speed milling SiCp/Al composites with small particles and high volume fraction by adopting PCD cutters with different grain sizes

Shutao Huang, Lin Guo, Haicheng Yang, Ying Su, Lifu Xu

19-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Investigation on the milling performance of amputating clamping supports for machining with industrial robot

Yiran Zhang, Kai Guo, Jie Sun

19-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Effect of cryogenic cooling on adiabatic shearing in processing titanium alloy

Fengbiao Wang, Yongqing Wang

20-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Influence of elliptical vibration on the behavior of silicon during nanocutting

Houfu Dai, Hao Du, Jianbin Chen, Genyu Chen

20-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Cloud manufacturing: challenges, recent advances, open research issues, and future trends

Einollah Jafarnejad Ghomi, Amir Masoud Rahmani, Nooruldeen Nasih Qader

20-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

The remaining time concept for dispatching on roller belt conveyor in 450-mm wafer fabrications

Chia-Nan Wang, Hsien-Pin Hsu, Dinh-Chien Dang, Quang-Thuy Nguyen

20-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A study of nanocrystalline nickel powders developed via high-energy ball milling

Bukola Joseph Babalola, Mxolisi Brendon Shongwe, Azeez Lawan Rominiyi, Samson Olaitan Jeje, Peter Apata Olubambi

21-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019 Open Access

Adaptive control of the filler wire rate during laser beam welding of squared butt joints with varying gap width

Morgan Nilsen, Fredrik Sikström, Anna-Karin Christiansson

21-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Configuration and reconfiguration of robotic systems for waste macro sorting

Stefania Pellegrinelli

22-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

CDW aluminium joints welding and optimisation with NDT/mechanical testing

Francesco W. Panella, Vito Dattoma, Marta De Giorgi, Fania Palano, Alessio Carofalo

23-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Welding-repair effect on F357-T6 aluminum castings: analysis of fatigue life

L. Esposito, A. Bertocco, G. Cricrì, V. Rosiello

23-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Modelling and optimization of surface roughness during AISI P20 milling process using Taguchi method

I. Tlhabadira, I. A. Daniyan, R. Machaka, C. Machio, L. Masu, L. R. VanStaden

23-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Formation of 04Cr18Ni9 steel structure and properties during additive manufacturing of blanks

Yuri D. Shchitsyn, Sergey A. Terentev, Sergey D. Neulybin, Arseny O. Artyomov

26-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Design of a register controller considering inherent characteristics of a roll-to-roll continuous manufacturing system

Jongsu Lee, Kee-Hyun Shin, Hyunkyoo Kang

26-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Improving hook characterization of friction stir lap welded Al alloy joint using a two-section stepped friction pin

R. Z. Xu, S. L. Cui, H. Li, Y. X. Hou, Z. C. Wei

26-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Lateral powder transport model with Gaussian distribution in laser cladding

Xinyong Gong, Junhong Wang, Haimei Feng

27-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Interval type-2 fuzzy logic systems optimized by central composite design to create a simplified fuzzy rule base in image processing for quality control application

Gerardo Maximiliano Méndez, Pascual Noradino Montes Dorantes, Adriana Mexicano Santoyo

27-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Research on roll forming process based on five-boundary condition forming angle distribution function

Chun-Jian Su, Long-Yun Yang, Shu-Mei Lou, Qing Wang, Rui Wang

28-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Fabrication of piston pins made of a novel aluminium-alloyed UHC steel

B.-A. Behrens, A. Chugreev, M. Kazhai, D. Yarcu, C. Büdenbender, R. Relge

28-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A new method for determining the instantaneous uncut chip thickness in micro-milling

Xiang Zhang, Xudong Pan, Guanglin Wang

28-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Analysis of heat-affected zone microstructures of steel P92 after welding and after post-weld heat treatment

Marko Dunđer, Tomaž Vuherer, Ivan Samardžić, Dejan Marić

28-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Investigation on the thermal behavior of an aerostatic spindle system considering multi-physics coupling effect

Qiang Gao, Lihua Lu, Rui Zhang, Laiyun Song, Dehong Huo, Guanglin Wang

28-02-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A profile-adaptive compliant polishing tool for aero-engine blade finishing process

Zhen Chen, Yaoyao Shi, Xiaojun Lin, Junfeng Zhang, Chao Kang, Xiufeng Shan, Nan Zhang, Pan Zhao, Xiaodong He, Hualian Li

01-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Hot-wire GTAW cladding: inconel 625 on 347 stainless steel

Bishal Silwal, James Walker, Daniel West

01-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Wrinkling prediction for GPa-grade steels in sheet metal forming process

Chanhee Won, Hyung-gyu Kim, Seokryul Lee, Dongjin Kim, Sunghyuk Park, Jonghun Yoon

01-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Intelligentization of machine tools: comprehensive thermal error compensation of machine-workpiece system

Kuo Liu, Haibo Liu, Te Li, Yu Liu, Yongqing Wang

02-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Effect of iron on the microstructure and mechanical properties of the spray-formed and rotary-swaged 319 aluminum alloy

Brenda Juliet Martins Freitas, Lucas Barcelos Otani, Claudio Shyinti Kiminami, Walter José Botta, Claudemiro Bolfarini

02-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V

Muhammad Jamil, Aqib Mashood Khan, Hussien Hegab, Le Gong, Mozammel Mia, Munish K. Gupta, Ning He

02-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Module-based machinery design: a method to support the design of modular machine families for reconfigurable manufacturing systems

Leandro Gauss, Daniel Pacheco Lacerda, Miguel Afonso Sellitto

02-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Post-processing algorithm of a five-axis machine tool with dual rotary tables based on the TCS method

Dao-Yang Yu, Zhi Ding

02-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Effect of FSP parameters and tool geometry on microstructure, hardness, and wear properties of AA7075 with and without reinforcing B4C ceramic particles

Lavinia Tonelli, A. Morri, S. Toschi, M. Shaaban, H. R. Ammar, M. M. Z. Ahmed, R. M. Ramadan, I. El-Mahallawi, L. Ceschini

03-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

The interrelation between Industry 4.0 and lean production: an empirical study on European manufacturers

Matteo Rossini, Federica Costa, Guilherme L. Tortorella, Alberto Portioli-Staudacher

04-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A novel method of calculating the engagement length of cutting edge in five-axis machining

Juan Du, Hongying Zhi, Pengcheng Liu, Yanfei Bai

04-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019 Open Access

Parametric optimization and process capability analysis for machining of nickel-based superalloy

Munish Kumar Gupta, Mozammel Mia, Catalin I. Pruncu, Wojciech Kapłonek, Krzysztof Nadolny, Karali Patra, Tadeusz Mikolajczyk, Daniil Yu. Pimenov, Murat Sarikaya, Vishal S. Sharma

05-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A hybrid geometric modeling method for lattice structures fabricated by additive manufacturing

Yunlong Tang, Guoying Dong, Yaoyao Fiona Zhao

05-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A novel method for preform die design in forging process of an airfoil blade based on Lagrange interpolation and meta-heuristic algorithm

Vali Alimirzaloo, Farid Reza Biglari, Mohammad Hossein Sadeghi, Peyman Mashhadi Keshtiban, Hamid Reza Sehat

05-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Optimization of SPS processing parameters on the density and hardness properties of graphene reinforced polylactic acid nanocomposite

O. T. Adesina, E. R. Sadiku, T. Jamiru, O. F. Ogunbiyi, L. W. Beneke, A. T. Adegbola

06-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Comparative study of infrared laser surface treatment and ultraviolet laser surface treatment of CFRP laminates

Yun Li, Xiaohong Zhan, Chuanyun Gao, Hongen Wang, Yang Yang

06-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Additive manufacturing processes from an environmental point of view: a new methodology for combining technical, economic, and environmental predictive models

Mazyar Yosofi, Olivier Kerbrat, Pascal Mognol

06-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A research based on advance dual-coil electromagnetic forming method on flanging of small-size tubes

Qi Xiong, Hao Huang, Liangyu Xia, Hongtao Tang, Li Qiu

06-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A framework for augmented reality guidance in industry

Jon Zubizarreta, Iker Aguinaga, Aiert Amundarain

06-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Emergy-based life-cycle assessment (Em-LCA) for sustainability assessment: a case study of laser additive manufacturing versus CNC machining

Qiuhong Jiang, Zhichao Liu, Tao Li, Weilong Cong, Hong-Chao Zhang

07-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

The identification of the cutting force coefficients for ball-end finish milling

Xiaojun Lin, Gang Wu, Yun Zhang, Tong Cui, Bo Zhang, Pengchen Sun

07-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Influence of the deformation of riveting-side working head on riveting quality

Jintong Liu, Heng Li, Yunbo Bi, Huiyue Dong, Yinglin Ke

07-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Micro-milling machinability of pure molybdenum

K. Mouralova, L. Benes, T. Prokes, R. Zahradnicek, J. Bednar, J. Otoupalik, Z. Fiserova, Z. Fiala

07-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019 Open Access

Cross-wire projection welding of aluminium alloys—pneumatic and electromechanical electrode force systems

Zygmunt Mikno

07-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Acoustic emission monitoring of sawing process: artificial intelligence approach for optimal sensory feature selection

Vahid Nasir, Julie Cool, Farrokh Sassani

07-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A bond-based peridynamic modeling of machining of unidirectional carbon fiber reinforced polymer material

S. Shang, X. D. Qin, S. P. Li, H. Li, X. F. Cao, Y. H. Li

08-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Generation of material removal map for freeform surface polishing with tilted polishing disk

Qing-Hui Wang, Yu-Jun Liang, Chen-Yang Xu, Jing-Rong Li, Xue-Feng Zhou

08-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Bearing fault diagnosis with nonlinear adaptive dictionary learning

Yanfei Lu, Rui Xie, Steven Y. Liang

08-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Partial strengthening method for cold stamped B-pillar with minimal shape change

Kwangyoon Kim, Youngnam Song, Wooho Yang, Hyuncheol Choi, Sung Hyuk Park, Jonghun Yoon

08-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

High speed machining of near-beta titanium Ti-5553 alloy under various cooling and lubrication conditions

Emre Tascioglu, Armin Gharibi, Yusuf Kaynak

08-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Global interference detection technology for five-axis machining of complex surfaces

Juan Du, Pengcheng Liu, Hongying Zhi, Peng Ding

09-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Single-minute exchange of die (SMED): a state-of-the-art literature review

Iris Bento da Silva, Moacir Godinho Filho

09-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A digital image processing model for characteristics capture and analysis of irregular electronic components

Chien-Yi Huang, Jiun-Yi Wu, Eric Huang

09-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Extended roughing operations to ISO 14649-11 for milling T-spline surfaces

Gang Zhao, Xinjie Zhang, Oleksandr Zavalnyi, Yazui Liu, Wenlei Xiao

09-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

A heuristic approach to module synthesis in the design of reconfigurable manufacturing systems

Michael A. Saliba, Sandro Azzopardi, Conrad Pace, Dawn Zammit

11-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Effect of stress relief annealing on microstructure, mechanical properties, and residual stress of a copper sheet in the constrained groove pressing process

Farshad Nazari, Mohammad Honarpisheh, Haiyan Zhao

11-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Volumetric error compensation model for five-axis machine tools considering effects of rotation tool center point

Sitong Xiang, Ming Deng, Huimin Li, Zhengchun Du, Jianguo Yang

12-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Underwater submerged dissimilar friction-stir welding of AA5083 aluminum alloy and A441 AISI steel

Hamed Aghajani Derazkola, Farzad Khodabakhshi

12-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Effects of tool wear on surface micro-topography in ultra-precision turning

Dongxu Wu, Bo Wang, Fengzhou Fang

12-03-2019 | ORIGINAL ARTICLE | Issue 9-12/2019

Compression deformation in the primary zone during the high-speed cutting of titanium alloy Ti-6Al-4V

Wenxi Li, Daochun Xu, Danping Xiong, Qingchan Ke

Current Publications

Premium Partner

    Image Credits