Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Cover of the book

2016 | OriginalPaper | Chapter

1. The Study of Thin Films by Electrochemical Impedance Spectroscopy

Authors : H. Cesiulis, N. Tsyntsaru, A. Ramanavicius, G. Ragoisha

Published in: Nanostructures and Thin Films for Multifunctional Applications

Publisher: Springer International Publishing

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The capabilities and advantages of electrochemical impedance spectroscopy (EIS) as a useful and non-destructive technique are discussed. EIS provides the time dependent quantitative information about the electrode processes. The description of EIS is given in comprehensive way beginning from the theoretical basics of EIS and data interpretation in the frames of various equivalent electric circuits. The practical applications of EIS are described for the following thin film types: (i) cathodic metals/alloys films deposition; (ii) anodization of metals and characterization of oxide films and its growth by EIS including information provided by Mott-Schottky plots; (iii) underpotential deposition of metals; (iv) characterization of organic films onto metals; (v) application in development of biosensors and biofuel cells. The original data of EIS on cathodic electrodeposition of Co and Co-W are provided and reduction mechanisms involving adsorbed intermediates are discussed. The advantages of EIS in the oxide films characterization and their electrochemical properties are shown. EIS can be successfully applied for the characterization of biosensing surfaces and/or in evaluation of bioanalytical signals generated by biosensors. The glucose oxidase (GOx) based biosensor could be successfully analyzed by merged scanning electrochemical microscopy (SECM) and EIS techniques. Such combining study by SECM and EIS could be very attractive in order to evaluate the biofuel cell efficiency and in the modeling of biosensor action, because it is unavailable to obtain by other convenient electrochemical methods.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
next chapter Nanostructures Obtained Using Electric Discharges at Atmospheric Pressure
Literature
1.
M. Sluyters-Rehbah, Impedances of electrochemical systems: terminology, nomenclature and representation. Part 1. Cells with metal electrodes and liquid solutions. Pure Appl. Chem. 66(9), 1831–1891 (1994)
2.
A.J. Bard, L.R. Faulkner, Electrochemical methods. Fundamentals and Applications (Wiley, New York, 2001), 829 pp
3.
E. Barsoukov, J.R. Macdonald (ed.), Impedance Spectroscopy Theory, Experiment, and Applications (Wiley, New York, 2005), 595 pp
4.
M.E. Orazem, B. Tribollet, Electrochemical Impedance Spectroscopy (Wiley, New York, 2008), 523 pp
5.
A. Lasia, in Electrochemical Impedance Spectroscopy and its Applications, ed. by B.E. Conway, J.O’M. Bockris, R.E. White, Modern Aspects of Electrochemistry, vol. 32 (Kluwer Academic Publishers, New York), pp. 143–248
6.
A. Lasia, Electrochemical Impedance Spectroscopy and its Applications (Springer, New York, 2014), 367 pp
7.
D. Landoldt, Corrosion and Surface Chemistry of Metals (EPFL Press, Lausanne, 2007), 622 pp
8.
J.O’M Bockris, A.K.N. Reddy, M. Gamboa-Aldeco, Modern Electrochemistry, vol. 24. Fundamentals of Electrodics (Kluwer Academic Publishers, New York, 2002)
9.
N. Tsyntsaru, H. Cesiulis, M. Donten, J. Sorte, E. Pellicer, E.J. Podlaha-Murphy, Modern trends in tungsten alloys electrodeposition with iron group metals. Surf. Eng. Appl. Electrochem. 48(6), 491–520 (2012)CrossRef
10.
S.S. Belevskii, H. Cesiulis, N. Tsyntsaru, A.I. Dikusar, The role of mass transfer in the formation of the composition and structure of CoW coatings electrodeposited from citrate solutions. Surf. Eng. Appl. Electrochem. 46(6), 570–578 (2010)
11.
Y. Liu, W. Wangz, Investigation on the Cu(II) and Co(II) electrochemical reduction process in citrate solution by CV and EIS. J. Electrochem. Soc. 159(6), D375–D381 (2012)
12.
T. Pajkossy, Th Wandlowski, D.M. Kolb, Impedance aspects of the anion adsorption on gold single crystal electrodes. J. Electroanal. Chem. 414, 209–220 (1996)
13.
J.R. Macdonald, Impedance Spectroscopy Emphasizing Solid Materials and Systems (Wiley, New York, 1987)
14.
C. Cachet, B. Saidani, R. Wiart, A model for zinc deposition in alkaline electrolytes: inhibition layer and activation mechanism. Electrochim. Acta 34, 1249 (1989)CrossRef
15.
C. Cachet, B. Saidani, R. Wiart, The kinetics of zinc deposition at low overpotentials in alkaline electrolytes. Electrochim. Acta 33, 405 (1988)CrossRef
16.
C. Cachet, B. Saidani, R. Wiart, The behavior of zinc electrode in alkaline electrolytes I. A kinetic analysis of cathodic deposition. J. Electrochem. Soc. 138, 678 (1991)CrossRef
17.
C. Cachet, Z. Chami, R. Wiart, The behavior of zinc electrode in alkaline electrolytes II. A kinetic analysis of anodic dissolution. J. Electrochem. Soc. 139(3), 644–654 (1991)CrossRef
18.
T. Chengyu, C. Hang, H. Wei, L. Yu, Z. Ziqiao, Influence of Nano-Al2O3 particles on nickel electrocrystallization at initial stage. Rare Metal Mat. Eng. 39, 10–16 (2010)CrossRef
19.
C. Cachet, C. Gabrielli, F. Huet, M. Keddam, R. Wiart, Electrochim. Acta 28, 899 (1983)CrossRef
20.
I. Danaee, Theoretical and experimental studies of layer by layer nucleation and growth of palladium on stainless steel Chemija. 24(2), 128–136 (2013)
21.
E.M. Garcia, T. Matencio, R.Z. Domingues, L.M. Garcia, J.A. Figueiredo dos Santos, N. Ribeiro, H.A. Tarôco, V. F.C. Lins, Study of cobalt electrodeposition onto stainless steel using electrochemical impedance spectroscopy (IES) J. Phys. Sci. Appl. 2(10), 409–413 (2012)
22.
E. Lassner, W.D. Schubert, Tungsten—Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compounds (Springer, New York, 1999), 422 pp
23.
M. Schwartz, N.V. Myung, K. Nobe, Electrodeposition of iron group-rare earth alloys from aqueous media. J. Electrochem. Soc. 151, C468–C477 (2004)CrossRef
24.
H. Cesiulis, A. Baltutiene, M. Donten, M.L. Donten, Z. Stojek, Increase in rate of electrodeposition and in Ni(II) concentration in the bath as a way to control grain size of amorphous/nanocrystalline Ni-W alloys. J. Solid State Electrochem. 6, 237–244 (2002)CrossRef
25.
H. Cesiulis, E.J. Podlaha-Murphy, Electrolyte considerations of electrodeposited Ni-W alloys for microdevice fabrication. Mater. Sci. (Medziagotyra) 9, 324–327 (2003)
26.
H. Cesiulis, M. Donten, M.L. Donten, Z. Stojek, Electrodeposition of Ni-W Ni-Mo and Ni-Mo-W alloys from pyrophosphate baths. Mater. Sci. (Medziagotyra) 7, 237–241 (2001)
27.
P. Andricacos, S.H. Boettcher, S.G. Malhotra, M. Paunovic, C. Ransom, Structure comprising a barrier layer of a tungsten alloy comprising cobalt and/or nickel. U.S. Patent Application Publication 6 pp. US 2004108136 A1 20040610 (2004)
28.
M. Svensson, U. Wahlstrom, G. Holmbom, Compositionally modulated cobalt–tungsten alloys deposited from a single ammoniacal electrolyte. Surf. Coat. Technol. 105, 218–223 (1998)CrossRef
29.
G.Y. Wei, J.W. Lou, H.L. Ge, Y.D. Yu, L. Jiang, L.X. Sun, Co–W films prepared from electroplating baths with different complexing agents. Surf. Eng. 28, 412–417 (2012)CrossRef
30.
D.P. Weston, S.J. Harris, P.H. Shipway, N.J. Weston, G.N. Yap, Establishing relationships between bath chemistry, electrodeposition and microstructure of Co-W alloy coatings produced from a gluconate bath. Electrochim. Acta 55, 5695–5708 (2010)CrossRef
31.
D.P. Weston, S.J. Haris, H. Capel, N. Ahmed, P.H. Shipway, J.M. Yellup, Nanostructured Co-W coatings produced by electrodeposition to replace hard Cr on aerospace components. Trans. Inst. Metal Finish. 88, 47–56 (2010)CrossRef
32.
A.I. Shul’man, S.S. Belevskii, S.P. Yushchenko, A.I. Dikusar, Role of complexation in forming composition of Co-W coatings electrodeposited from gluconate electrolyte. Surf. Eng. Appl. Electrochem. 50(1), 9–17 (2014)
33.
S.S. Belevskii, S.P. Yushchenko, A.I. Dikusar, Anomalous electrodeposition of Co-W coatings from a citrate electrolyte due to the formation of multinuclear heterometallic complexes in the solution. Surf. Eng. Appl. Electrochem. 48, 97–98 (2012)CrossRef
34.
J.S. Santos, F. Trivinho-Strixino, E.C. Pereira, Investigation of Co(OH)2 formation during cobalt electrodeposition using a chemometric procedure. Surf. Coat. Technol. 205, 2585–2589 (2010)CrossRef
35.
P. Vermeiren, R. Leysen, H. Vandenborre, Study of hydrogen evolving reaction in alkaline medium at nickel and cobalt based electrocatalysts. Electrochim. Acta 30, 1253 (1985)CrossRef
36.
D.R. Gabe, The role of hydrogen in metal electrodeposition processes. J. Appl. Electrochem. 27, 908 (1997)CrossRef
37.
J.T. Matsushima, F. Trivinho-Strixino, E.C. Pereira, Investigation of cobalt deposition using the electrochemical quartz crystal microbalance Electrochim. Acta 51 (2006)
38.
J.S. Santos, R. Matos, F. Trivinho-Strixino, E.C. Pereira, Effect of temperature on Co electrodeposition in the presence of boric acid Electrochim. Acta 53, 644 (2007)
39.
W.C. Grande, J.B. Talbot, Electrodeposition of thin films of nickel-iron. 1. Experimental. J. Electrochem. Soc. 140(3), 669–674 (1993)CrossRef
40.
W.C. Grande, J.B. Talbot, Electrodeposition of thin films of nickel-iron. 2. Modelling. J. Electrochem. Soc. 140(3), 675–681 (1993)CrossRef
41.
A. Budreika, The study of the electrodeposition of Ni, Co and their alloys with tungsten and molybdenum. Doctoral dissertation, 2010, Vilnius
42.
Yan Liu, Wei Wang, Investigation on the Cu(II) and Co(II) electrochemical reduction process in citrate solution by CV and EIS. J. Electrochem. Soc. 159(6), D375–D381 (2012)CrossRef
43.
H. Cesiulis, G. Baltrunas, The study of surface passivity and blocking by the electrochemical technique. Physicochem. Mech. Mater. 5, 11–17 (2006)
44.
M.I. Jeffrey, W.L. Choo, P.L. Breuer, The effect of additives and impurities on the cobalt electrowinning process. Miner. Eng. 13(12), 1231–1241 (2000)CrossRef
45.
S.S. Belevskii, S.P. Yushchenko, A.I. Dikusar, Electrodeposition of nanocrystalline Co–W coatings from citrate electrolytes under controlled hydrodynamic conditions: Part 1. Co electrodeposition. Surf. Eng. Appl. Electrochem. 45(6), 446–454 (2009)CrossRef
46.
S.S. Belevskii, N.I. Tsyntsaru, A.I. Dikusar, Electrodeposition of nanocrystalline Co–W coatings from citrate electrolytes under controlled hydrodynamic conditions: part 2. The electrodeposition rate and composition of the coatings. Surf. Eng. Appl. Electrochem. 46(2), 91–99 (2010)CrossRef
47.
N. Tsyntsaru, H. Cesiulis, E. Pellicer, J.-P. Celis, J. Sort, Structural, magnetic, and mechanical properties of electrodepositedcobalt–tungsten alloys: intrinsic and extrinsic interdependencies. Electrochim. Acta 104, 94–103 (2013)CrossRef
48.
S.A. Silkin, S.S. Belevskii, A.S. Gradinar, V.I. Petrenko, I.V. Yakovets, N.I. Tsyntsaru, A.I. Dikusar, Electrodeposition of nanocrystalline Co–W coatings from citrate electrolytes under controlled hydrodynamic conditions: part 3. The micro_ and macrodistribution of the deposition rates, the structure and the mechanical properties. Surf. Eng. Appl. Electrochem. 46(3), 206–214 (2010)CrossRef
49.
L.M. Hagelsieb, Anodic aluminum oxide processing, characterization and application to DNA hybridization electrical detection. PhD. thesis, Universite Catholique de Louvain, Louvain-La-Neuve, Belgique (2007)
50.
C.X. Jiang, J.P. Tu, S.Y. Guo, M.F. Fu, X.B. Zhao, Friction properties of oil-infiltrated porous AAO film on an aluminium substrate. Acta Metallurgica Sinica (English Letters) 18, 249–253 (2005)
51.
W. Lee, The anodization of aluminium for nanotechnology applications. JOM 62, 57–63 (2010)CrossRef
52.
J. Choi, Fabrication of monodomain porous alumina using nanoimprint lithography and its applications. PhD. thesis, Martin-Luther-Universitat Halle, Wittenberg, Germany (2004)
53.
I.U. Khan, P. John, S.T. Sheikh, N. Gulzar, A.U. Rehman, Anodizing of aluminum with improved corrosion properties. J. Chem. Soc. Pak. 32, 46–51 (2010)
54.
T.D. Burleigh, P. Schmuki, S. Virtanen, Properties of the nanoporous anodic oxide electrochemically grown on steel in hot 50 % NaOH. J. Electrochem. Soc. 156(1), C45–C53 (2009)CrossRef
55.
J.J. Suay, E. Gimenez, T. Rodrıguez, K. Habbib, J.J. Saura, Characterization of anodized and sealed aluminium by EIS. Corros. Sci. 45, 611–624 (2003)CrossRef
56.
M.R. Kalantary, D.R. Gabe, D.H. Ross, A model for the mechanism of nickel fluoride cold sealing of anodized aluminium. J. Appl. Electrochem. 22(3), 268–276 (1992)CrossRef
57.
J.A. Gonzalez, S. Feliu, J.A. Bautista, E. Otero, Changes in cold sealed aluminum oxide films during ageing. J. Appl. Electrochem. 29, 843–852 (1999)CrossRef
58.
V López, E. Otero, A. Bautista, E. Escudero, J.A. González, Changes in the morphology of porous anodic films formed on aluminium in natural and artificial ageing. Rev Metal Madrid Vol Extr, 104–109 (2003)
59.
F. Mansfeld, M.W. Kendig, Spectroscopy as quality control and corrosion test for anodized aluminum alloys. Corrosion 41, 490 (1985)CrossRef
60.
F. Mansfeld, M.W. Kendig, W.J. Lorenz, Corrosion inhibition in neutral, aerated media. J. Electrochem. Soc. 132, 290 (1985)CrossRef
61.
J. Hizing, K. Juettner, W.J. Lorenz, W. Paatsch, AC-impedance measurements on porous aluminium oxide films. Corros. Sci. 24, 945 (1984)CrossRef
62.
T.P. Hoar, G.C. Wood, The sealing of porous anodic oxide films on aluminium. Electrochim. Acta 7, 333 (1962)CrossRef
63.
K. Juettner, W.J. Lorenz, W. Paatsch, The role of surface inhomogeneities in corrosion processes-electrochemical impedance spectroscopy (EIS) on different aluminium oxide films. Corros. Sci. 29, 279–288 (1989)CrossRef
64.
F. Mansfeld, Electrochemical impedance spectroscopy (EIS) as a new tool for investigating methods of corrosion protection. Electrochim. Acta 35, 1533 (1990)CrossRef
65.
J. Pan, D. Thierry, C. Leygraf, Electrochemical impedance spectroscopy study of the passive oxide film on titanium for implant application. Electrochim. Acta 41(7–8), 1143 (1996)CrossRef
66.
J.R. Birch, T.D. Burleigh, Oxides formed on titanum by polishing, etching, anodzng, or thermal oxidizng. Corrosion 56(12), 1233 (2000)CrossRef
67.
M. Aziz-Kerrzo, K.G. Conroy, A.M. Fenelon, S.T. Farrell, C.B. Breslin, Electrochemical studies on the stability and corrosion resistance of titanium-based implant materials. Biomaterials 22, 1531 (2001)CrossRef
68.
S. Piazza, G. Lo, Biundo, M.C. Romano, C. Sunseri, F. Di Quarto, In situ characterization of passive films on al-ti alloy by photocurrent and impedance spectroscopyfn1. Corros. Sci. 40(7), 1087 (1998)CrossRef
69.
J.R. Macdonald, Impedance Spectroscopy (Wiley, New York, 1987)
70.
M.J. Esplandiu, E.M. Patrito, V.A. Macagno, Characterization of hafnium anodic oxide films: an AC impedance investigation. Electrochim. Acta 40(7), 809 (1995)CrossRef
71.
M.E.P. Souza, M. Ballester, C.M.A. Freire, EIS characterisation of Ti anodic oxide porous films formed using modulated potential. Surf. Coat. Technol. 201, 7775–7780 (2007)CrossRef
72.
J.M. Macak, L.V. Taveira, H. Tsuchiya, K. Sirotna, J. Macak, P. Schmuki, Influence of different fluoride containing electrolytes on the formation of self-organized titania nanotubes by Ti anodization. J. Electroceram. 16, 29–34 (2006)CrossRef
73.
N.K. Shrestha, J.M. Macak, F. Schmidt-Stein, R. Hahn, C.T. Mierke, B. Fabry, P. Schmuki, Magnetically guided titania nanotubes for site-selective photocatalysis and drug release. Angew. Chem. 120, 1–5 (2008)CrossRef
74.
H. Cesiulis, T. Maliar, N. Tsyntsaru, F. Wenger, P. Ponthiaux, E. Podlaha, Anodic titanium oxide films: photoelectrochemical and tribocorrosion behavior. J. Nanoelectron. Optoelectron. 9, 1–6 (2014)CrossRef
75.
Balakrishnan Munirathinam, Lakshman Neelakantan, Titania nanotubes from weak organic acid electrolyte: Fabrication, characterization and oxide film properties. Mater. Sci. Eng. C 49, 567–578 (2015)CrossRef
76.
A.W. Brace, The Technology of Anodizing Aluminium (Tecnicopy Ltd., Stonenhouse, Gloucesterhire, Great Britian, 1979), pp. 1–19
77.
H. Bai, F. Wang, Protective properties of high temperature oxide films on Ni-based superalloys in 3.5 % NaCl solution. J. Mater. Sci. Technol. 23(4) (2007)
78.
P. Schmuki, H. Bohni, Semiconductive properties of passive films and susceptibility to localized corrosion. Werkstoffe und Korrosion Mater. Corros. 42(5), 203–207 (1991)
79.
N.E. Hakiki, S. Boudin, B. Rondot, M. Da Cunha, Belo. The electronic structure of passive films formed on stainless steels. Corros. Sci. 37(11), 1809–1822 (1995)CrossRef
80.
A.S. Bondarenko, G.A. Ragoisha. Variable Mott-Schottky plots acquisition by potentiodynamic electrochemical impedance spectroscopy. J. Solid State Electrochem. 9(12), 845–849 (2005)
81.
K. Gelderman, L. Lee, S.W. Donne, Flat-band potential of a semiconductor: using the Mott-Schottky equation. J. Chem. Educ. 84(7), 685–688 (2007)CrossRef
82.
D. Li, D. Chen, J. Wang, H. Chen, Chemical composition and Mott-Schottky analysis of passive film formed on G3 alloy in bicarbonate/karbonate buffer solution. Acta Metall. Sin. (Engl. Lett.). 23(6), 461–472 (2010)
83.
E. Sikora, J. Sikora, D.D. Macdonald, A new method for estimating the diffusivities of vacancies in passive films. Electrochim. Acta 41(6), 783–789 (1996)CrossRef
84.
Z. Jiang, X. Dai, H. Middleton, Investigation on passivity of titanium under steady-state conditions in acidic solutions. Mater. Chem. Phys. 126(3), 859–865 (2011)CrossRef
85.
M. Tomkiewicz, Impedance spectroscopy of rectifying semiconductor-electrolyte interfaces. Electrochim. Acta 35(10), 1631–1635 (1990)CrossRef
86.
B.W. Gregory, D.W. Suggs, J.L. Stickney, Conditions for the deposition of CdTe by electrochemical atomic layer epitaxy. J. Electrochem. Soc. 138, 1279–1284 (1991)CrossRef
87.
F. Forni, M. Innocenti, G. Pezzatini, M.L. Foresti, Electrochemical aspects of CdTe growth on the face (111) of silver by ECALE. Electrochim. Acta 45, 3225–3231 (2000)CrossRef
88.
A.S. Bondarenko, G.A. Ragoisha, N.P. Osipovich, E.A. Streltsov, Multiparametric electrochemical characterisation of Te-Cu-Pb atomic three-layer structure deposition on polycrystalline gold. Electrochem. Commun. 8, 921–926 (2006)CrossRef
89.
G.A. Ragoisha, A.S. Bondarenko, N.P. Osipovich, S.M. Rabchynski, E.A. Streltsov, Multiparametric characterisation of metal-chalcogen atomic multilayer assembly by potentiodynamic electrochemical impedance spectroscopy. Electrochim. Acta 53, 3879–3888 (2008)CrossRef
90.
I. Sisman, U. Demir, Electrochemical growth and characterization of size-quantized CdTe thin films grown by underpotential deposition. J. Electroanal. Chem. 651, 222–227 (2011)CrossRef
91.
J. Stickney, in Encyclopedia of Applied Electrochemistry, ed. by G. Kreysa, R.F. Savinell, K. Ota (Springer, New York, 2014), pp. 1447–1453
92.
M. Bouroushian, Electrochemistry of Metal Chalcogenides (Springer, Heidelberg, 2010)
93.
D.M. Kolb, M. Przasnysky, H. Gerischer, Underpotential deposition of metals and work function differences. J. Electroanal. Chem. 54, 25–38 (1974)
94.
E. Budevski, G. Staikov, W.J. Lorenz, Electrochemical Phase Formation and Growth (VCH, Weinheim, 1996)CrossRef
95.
P.V. Chulkin, Y.M. Aniskevich, E.A. Streltsov, G.A. Ragoisha, Underpotential shift in electrodeposition of metal adlayer on tellurium and the free energy of metal telluride formation. J Solid State Electrochem. 19, 2511–2516 (2015). doi:10.​1007/​s10008-015-2831-x
96.
G.A. Ragoisha, Potentiodynamic electrochemical impedance spectroscopy for underpotential deposition processes. Electroanalysis 27, 855–863 (2015)
97.
G.A. Ragoisha, A.S. Bondarenko, Potentiodynamic electrochemical impedance spectroscopy. Copper underpotential deposition on gold. Electrochem. Commun. 5, 392–395 (2003)
98.
G.A. Ragoisha, A.S. Bondarenko, Potentiodynamic electrochemical impedance spectroscopy. Electrochim. Acta 50, 1553–1563 (2005)
99.
J.E. Garland, K.A. Assiongbon, C.M. Pettit, S.B. Emery, D. Roy, Kinetic analysis of electrosorption using fast fourier transform electrochemical impedance spectroscopy: underpotential deposition of Bi3+ in the presence of coadsorbing ClO4- on Gold. Electrochim. Acta 47, 4113–4124 (2002)
100.
S. Morin, H. Dumont, B.E. Conway, Evaluation of the effect of 2-Dimensional geometry of Pt single-crystal faces on the kinetics of UPD of H using impedance spectroscopy. J. Electroanal. Chem. 412, 39–52 (1992)
101.
G.A. Ragoisha, A.S. Bondarenko, N.P. Osipovich, E.A. Streltsov, Potentiodynamic electrochemical impedance spectroscopy of lead upd on polycrystalline gold and on selenium atomic underlayer. Electrochem. Commun. 7, 631–636 (2005)CrossRef
102.
L. Beaunier, I. Epelboin, J.C. Lestrade, H. Takenouti, Electrochemical and scanning microscope study of pained Fe. Surf. Technol. 4, 237 (1976)CrossRef
103.
F. Mansfield, M. Kendig, S. Tsai, Evaluation of corrosion behavior of coated metals with AC impedance measurements. Corrosion 38(7), 478–485 (1982)CrossRef
104.
A. Ramanavicius, A. Finkelsteinas, H. Cesiulis, A. Ramanaviciene, Electrochemical impedance spectroscopy of polypyrolle based immunosensor. Bioelectrochemistry 79(1), 11–16 (2010)CrossRef
105.
P.L. Bonora, F. Deflorian, L. Fedrizzi. Electrochemical impedance spectroscopy as a tool for investigating underpaint corrosion. Electrochimica Acta 41(7–8), 1073–1082 (1996)
106.
J. Padgurskas, R. Rukuiza, H. Cesiulis, A. Amulevicius, A. Daugvila, R. Davidonis, C. Sipavicius, The properties and physicochemical interactions in the system iron-fluoroligomer. Physicochem. Mech. Mater. 45(5), 81–90 (2009)
107.
J. Padgurskas, R. Rukuiza, A. Amulevicius, C. Sipavicius, K. Mazeika, R. Davidonis, A. Daugvila, H. Cesiulis, Influence of fluor-oligomers on the structural and tribological properties of steel surface at the rolling friction. Ind. Lubr. Tribol 60(5), 222–227 (2008)CrossRef
108.
V.F. Lvovich, M.F. Smiechowski, Non-linear impedance analysis of industrial lubricants. Electrochim. Acta 53(25), 7375–7385 (2008)CrossRef
109.
D. Hallam, D. Thurrowgood, V. Otieno-Alego, D. Creagh, An EIS Method for assessing thin oil films used in museums, in Proceedings of Metal 2004 National Museum of Australia Canberra ACT, 4–8 October 2004 ABN 70 592 297 967, pp. 388–399
110.
L. Jianguo, G. Gaoping, Y. Chuanwei, EIS study of corrosion behaviour of organic coating/Dacromet composite systems. Electrochimica Acta 50(16–17), 3320–3332 (2005)
111.
Y.J. Tan, S. Balley, B. Kinsella, An investigation of the formation and destruction of corrosion inhibitor films using electrochemical impedance spectroscopy (EIS). Corros. Sci. 38(9), 1545–1561 (1996)CrossRef
112.
S. González, M.A. Gil, J.O. Hernández, V. Fox, R.M. Souto, Resistance to corrosion of galvanized steel covered with an epoxy-polyamide primer coating. Prog. Org. Coat. 41, 167–170 (2001)CrossRef
113.
H. Cesiulis, N. Tsyntsaru, Non-destructive method for assessing thin oil films, in Proceedings of the International Conference BALTTRIB’2009 (2009), pp. 59–64
114.
J.J. Santana, J.E. González, J. Morales, S. González, R.M. Souto, Evaluation of ecological organic paint coatings via electrochemical impedance spectroscopy. Int. J. Electrochem. Sci. 7, 6489–6500 (2012)
115.
N. Hammouda, H. Chadli, G. Guillemot, K. Belmokre, The corrosion protection behaviour of zinc rich epoxy paint in 3 % NaCl solution advances in chemical. Eng. Sci. 1, 51–60 (2011)
116.
B.M. Fernández-Pérez, J.A. González-Guzmán, S. González, R.M. Souto, Electrochemical impedance spectroscopy investigation of the corrosion resistance of a waterborne acrylic coating containing active electrochemical pigments for the protection of carbon steel. Int. J. Electrochem. Sci. 9, 2067–2079 (2014)
117.
P.L. Bonora, F. Deflorian, L. Fedrizzi. Electrochemical impedance spectroscopy as a tool for investigating underpaint corrosion. Electrochimica Acta 41(7–8), 1073–1082 (1996)
118.
H. Cesiulis, G. Baltrūnas, J. Padgurskas, The effect of FOLEOX thin films on the corrosion behaviour of Armco iron. Mater. Sci. (Medziagotyra) 8(4), 392–395 (2002)
119.
G.W. Walter, A review of impedance plot methods used for corrosion performance analysis of painted metals. Corros. Sci. 26(9), 681–703 (1986)CrossRef
120.
Y.J. Tom, S. Bailey, An investigation on the formation and destruction of corrosion inhibitor films using electrochemical noise analysis (ENA). Corros. Sci. 38(9), 1545–1561 (1996)CrossRef
121.
A. Banu, O, Radovici, M. Marcu, T. Spataru, S. Jurcoane, Electrochemical synthesis and characterization of a polipyrrole/lipase composite film. Roum. Biotechnol. Lett. 13(1), 3551–3556 (2008)
122.
I. Morkvenaite-Vilkonciene, P. Genys, A. Ramanaviciene, A. Ramanavicius, Scanning electrochemical impedance microscopy for investigation of glucose oxidase catalyzed reaction colloids and surfaces. B-Biointerfaces 126, 598–602 (2015)
123.
I. Lapenaite, A. Ramanaviciene, A. Ramanavicius, Current trends in enzymatic determination of glycerol. Crit. Rev. Anal. Chem. 36, 13–25 (2006)CrossRef
124.
A. Ramanavicius, A. Ramanaviciene, A. Malinauskas, Electrochemical sensors based on conducting polymer—polypyrrole (Review). Electrochim. Acta 51, 6025–6037 (2006)CrossRef
125.
Y. Oztekin, A. Ramanaviciene, Z. Yazicigil, A.O. Solak, A. Ramanavicius, Direct electron transfer from glucose oxidase immobilized on polyphenanthroline modified-glassy carbon electrode. Biosens. Bioelectron. 26, 2541–2546 (2011)CrossRef
126.
N. German, A. Ramanaviciene, A. Ramanavicius, Electrochemical deposition of gold nanoparticles on graphite rod for glucose biosensing. Sens. Actuators B: Chem. 203, 25–34 (2014)CrossRef
127.
A. Ramanavicius, P. Genys, A. Ramanaviciene, Electrochemical impedance spectroscopy based evaluation of 1,10-Phenanthroline-5,6-dione and glucose oxidase modified graphite electrode. Electrochim. Acta 146, 659–665 (2014)CrossRef
128.
A. Ramanavicius, P. Genys, Y. Oztekin, A. Ramanaviciene, Evaluation of the redox mediating properties of 1,10-Phenanthroline-5,6-dione for glucose oxidase modified graphite electrodes. J. Electrochem. Soc. 161, B31–B33 (2014)CrossRef
129.
D.D. Macdonald, Reflections on the history of electrochemical impedance spectroscopy. Electrochim. Acta 51, 1376–1388 (2006)CrossRef
130.
R.K. Shervedani, A.H. Mehrjardi, N. Zamiri, A novel method for glucose determination based on electrochemical impedance spectroscopy using glucose oxidase self-assembled biosensor. Bioelectrochemistry 69, 201–208 (2006)CrossRef
131.
T. Hoshino, S. Sekiguchi, H. Muguruma, Amperometric biosensor based on multilayer containing carbon nanotube, plasma-polymerized film, electron transfer mediator phenothiazine, and glucose dehydrogenase. Bioelectrochemistry 84, 1–5 (2012)CrossRef
132.
B. Kurtinaitiene, D. Ambrozaite, V. Laurinavicius, A. Ramanaviciene, A. Ramanavicius, Amperometric immunosensor for diagnosis of BLV infection. Biosens. Bioelectron. 23, 1547–1554 (2008)CrossRef
133.
Y. Oztekin, A. Ramanaviciene, N. Ryskevic, Z. Yazicigil, Z. Ustundag, A.O. Solak, A. Ramanavicius, 1,10-Phenanthroline modified glassy carbon electrode for voltammetric determination of cadmium(II) ions. Sens. Actuators B: Chem. 157, 146–153 (2011)CrossRef
134.
Y. Oztekin, Z. Yazicigil, A. Ramanaviciene, A. Ramanavicius, Polyphenol-modified glassy carbon electrodes for copper detection. Sens. Actuators B: Chem. 152, 37–48 (2011)CrossRef
135.
Y. Oztekin, Z. Yazicigil, A. Ramanaviciene, A. Ramanavicius, Square wave voltammetry based determination of copper (II) ions by polyluteolin- and polykaempferol-modified electrodes. Talanta 85, 1020–1027 (2011)CrossRef
136.
A. Ramanaviciene, A. Ramanavicius, Pulsed amperometric detection of DNA with an ssDNA/polypyrrole modified electrode. Anal. Bioanal. Chem. 379, 287–293 (2004)CrossRef
137.
A. Ramanavicius, Y. Oztekin, A. Ramanaviciene Electrochemical Formation of Polypyrrole-based layer for immunosensor design. Sens. Actuators B: Chem. 197, 237–243 (2014)
138.
V. Ratautaite, S.D. Janssens, K. Haenen, M. Nesládek, A. Ramanaviciene, I. Baleviciute, A. Ramanavicius, Molecularly imprinted polypyrrole based impedimentric sensor for theophylline determination. Electrochim. Acta 130, 361–367 (2014)CrossRef
139.
V. Ratautaite, D. Plausinaitis, I. Baleviciute, L. Mikoliunaite, A. Ramanaviciene, A. Ramanavicius, Characterization of caffeine-imprinted polypyrrole by a quartz crystal microbalance and electrochemical impedance spectroscopy. Sens. Actuators B: Chem. 212, 63–71 (2015)
140.
A. Ramanaviciene, A. Finkelsteinas, A. Ramanavicius, Basic electrochemistry meets nanotechnology: Electrochemical preparation of artificial receptors based on a nanostructured conducting polymer, polypyrrole. J. Chem. Educ. 83, 1212–1214 (2006)CrossRef
141.
A. Ramanaviciene, A. Ramanavicius, Molecularly imprinted polypyrrole-based synthetic receptor for direct detection of bovine leukemia virus glycoproteins. Biosens. Bioelectron. 20, 1076–1082 (2004)CrossRef
142.
V. Ratautaite, S.N. Topkaya, L. Mikoliunaite, M. Ozsoz, Y. Oztekin, A. Ramanaviciene, A. Ramanavicius, Molecularly imprinted polypyrrole for DNA determination. Electroanalysis 25, 1169–1177 (2013)CrossRef
143.
A. Ramanaviciene, A. Ramanavicius, Application of polypyrrole for the creation of immunosensors. Crit. Rev. Anal. Chem. 32, 245–252 (2002)CrossRef
144.
D. Plausinaitis, V. Ratautaite, L. Mikoliunaite, L. Sinkevicius, A. Ramanaviciene, A. Ramanavicius, Quartz crystal microbalance based evaluation of electrochemical formation of aggregated polypyrrole particle based layer. Langmuir 31(10), 3186–3193 (2015)CrossRef
145.
A. Ramanaviciene, N. German, A. Kausaite-Minkstimiene, J. Voronovic, J. Kirlyte, A. Ramanavicius, Comparative study of surface plasmon resonance, electrochemical and electroassisted chemiluminescence methods based immunosensor for the determination of antibodies against human growth hormone. Biosens. Bioelectron. 36, 48–55 (2012)CrossRef
146.
A.S. Bandarenka, K. Eckhard, A. Maljusch, W. Schuhmann, Localized electrochemical impedance spectroscopy: Visualization of spatial distributions of the key parameters describing solid/liquid interfaces. Anal. Chem. 85, 2443–2448 (2013)CrossRef
147.
V. Kuznetsov, A. Maljusch, R.M. Souto, A.S. Bandarenka, W. Schuhmann, Characterization of localised corrosion processes using scanning electrochemical impedance microscopy. Electrochem. Commun. 44, 38–41 (2014)CrossRef
148.
L. Philippe, G. Walter, S. Lyon, Investigating localized degradation of organic coatings comparison of electrochemical impedance spectroscopy with local electrochemical impedance spectroscopy. J. Electrochem. Soc. 150, B111–B119 (2003)CrossRef
149.
K. Darowicki, M. Szociński, A. Zieliński, Assessment of organic coating degradation via local impedance imaging. Electrochim. Acta 55, 3741–3748 (2010)CrossRef
150.
M. Szociński, K. Darowicki, K. Schaefer, Identification and localization of organic coating degradation onset by impedance imaging. Polym. Degrad. Stab. 95, 960–964 (2010)CrossRef
151.
A. Ramanavicius, A. Kausaite-Minkstimiene, I. Morkvenaite-Vilkonciene, P. Genys, R. Mikhailova, T. Semashko, J. Voronovic, A. Ramanaviciene, Biofuel cell based on glucose oxidase from Penicillium funiculosum 46.1 and horseradish peroxidase. Chem. Eng. J. 264, 165–173 (2015)CrossRef
152.
A. Ramanavicius, Y. Oztekin, A. Ramanaviciene, Electrochemical formation of polypyrrole-based layer for immunosensor design. Sens. Actuators B: Chem. 197, 237–243 (2014)
153.
M.V. Mirkin, W. Nogala, J. Velmurugan, Y. Wang, Scanning electrochemical microscopy in the 21st century. Update 1: five years after. Phys. Chem. Chem. Phys. 13, 21196–21212 (2011)CrossRef
154.
M. Ciobanu, D.E. Taylor, J.P. Wilburn, D.E. Cliffel, Glucose and lactate biosensors for scanning electrochemical microscopy imaging of single live cells. Anal. Chem. 80, 2717–2727 (2008)CrossRef
155.
D.T. Pierce, P.R. Unwin, A.J. Bard, Scanning electrochemical microscopy. 17. Studies of enzyme-mediator kinetics for membrane- and surface-immobilized glucose oxidase. Anal. Chem. 64, 1795–1804 (1992)CrossRef
156.
B.R. Horrocks, D. Schmidtke, A. Heller, A.J. Bard, Scanning electrochemical microscopy. 24. Enzyme ultramicroelectrodes for the measurement of hydrogen peroxide at surfaces. Anal. Chem. 65, 3605–3614 (1993)CrossRef
157.
K. Eckhard, T. Erichsen, M. Stratmann, W. Schuhmann, Frequency-dependent alternating-current scanning electrochemical microscopy (4D AC-SECM) for local visualisation of corrosion sites. Chem. Eur. J. 14, 3968–3976 (2008)CrossRef
158.
K. Eckhard, C. Kranz, H. Shin, B. Mizaikoff, W. Schuhmann, Frequency dependence of the electrochemical activity contrast in AC-scanning electrochemical microscopy and atomic force microscopy-AC-scanning electrochemical microscopy imaging. Anal. Chem. 79, 5435–5438 (2007)CrossRef
159.
P.M. Diakowski, Z.F. Ding, Novel strategy for constant-distance imaging using alternating current scanning electrochemical microscopy. Electrochem. Commun. 9, 2617–2621 (2007)CrossRef
160.
B. Ballesteros, A. Katemann, E.J. Schulte, M. Calvo, W. Koudelka-Hep, Schuhmann, Localised electrochemical impedance spectroscopy with high lateral resolution by means of alternating current scanning electrochemical microscopy. Electrochem. Commun. 4, 134–138 (2002)CrossRef
161.
C. Gabrielli, M. Keddam, N. Portail, P. Rousseau, H. Takenouti, V. Vivier, Electrochemical impedance spectroscopy investigations of a microelectrode behavior in a thin-layer cell: experimental and theoretical studies. J. Phys. Chem. B 110, 20478–20485 (2006)CrossRef
162.
C. Gabrielli, F. Huet, M. Keddam, P. Rousseau, V. Vivier, Scanning electrochemical microscopy imaging by means of high-frequency impedance measurements in feedback mode. J. Phys. Chem. B 108, 11620–11626 (2004)CrossRef
163.
A.S. Baranski, P.M. Diakowski, Application of AC impedance techniques to scanning electrochemical microscopy. J. Solid State Electrochem. 8, 683–692 (2004)
164.
K. Eckhard, H. Shin, B. Mizaikoff, W. Schuhmann, C. Kranz, Alternating current (AC) impedance imaging with combined atomic force scanning electrochemical microscopy (AFM-SECM). Electrochem. Commun. 9, 1311–1315 (2007)CrossRef
Metadata
Title
The Study of Thin Films by Electrochemical Impedance Spectroscopy
Authors
H. Cesiulis
N. Tsyntsaru
A. Ramanavicius
G. Ragoisha
Copyright Year
2016
Book
Nanostructures and Thin Films for Multifunctional Applications

Print ISBN: 978-3-319-30197-6

Electronic ISBN: 978-3-319-30198-3

Copyright Year: 2016

DOI
https://doi.org/10.1007/978-3-319-30198-3_1

Premium Partners

    Image Credits