Top

Metallurgical and Materials Transactions A

Published in:

21-06-2017

Thermodynamic Assessments of the Fe-Si-Cr and Fe-Si-Mg Systems

Authors: Senlin Cui, In-Ho Jung

Published in: Metallurgical and Materials Transactions A | Issue 9/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Thermodynamic assessments for the Fe-Si-Cr and Fe-Si-Mg ternary systems were conducted based on the critically evaluated and optimized thermodynamic and phase diagram data in the literature. The Gibbs energy of the liquid phase was described using the modified quasi-chemical model in pair approximation. The obtained thermodynamic descriptions of the Fe-Si-Cr and Fe-Si-Mg systems can be used to calculate any sections of the phase diagrams and thermodynamic properties of these two systems with high accuracy from room temperature to above the melting temperature.

previous article Phase Equilibria in the Fe-Mo-Ti Ternary System at 1173 K (900 °C) and 1023 K (750 °C)

next article Failure Mechanism of a Stellite Coating on Heat-Resistant Steel

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

S. Shin, R. Schafer, and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4239–47.CrossRef

S.F. Chen, H.Y. Chang, S.J. Wang, S.H. Chen, and C.C. Chen: J. Alloys Compd., 2015, vol. 637, pp. 30–35.CrossRef

K. Zhu, J. Yang, R.-Z. Wang, and Z.-G. Yang: J. Iron Steel Res. Int., 2011, vol. 18, pp. 60–64.CrossRef

R.K. Wilson: Weld. Res., 1982, pp. 182s–188s.

X. Xu, J. Odqvist, M.H. Colliander, M. Thuvander, A. Steuwer, J.E. Westraadt, S. King, and P. Hedström: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 5942–52.CrossRef

T. Chart, F. Putland, and A. Dinsdale: CALPHAD, 1980, vol. 4, pp. 27–46.CrossRef

M. Lindholm: J. Phase Equilib., 1997, vol. 18, pp. 432–40.CrossRef

J. Miettinen: CALPHAD, 1999, vol. 23, pp. 249–62.CrossRef

Y. Du, J.R. Zhao, C. Zhang, H.L. Chen, and L.J. Zhang: J. Min. Metall., Sect. B, 2007, vol. 43, pp. 39–56.

10.

S. Cui and I.-H. Jung: CALPHAD, 2017, vol. 56, pp. 108–25.CrossRef

11.

J. O. Andersson and B. Sundman: CALPHAD, 1987, vol. 11, pp. 83–92.CrossRef

12.

S. Cui and I.-H. Jung: CALPHAD, 2017, vol. 56, pp. 241–59.CrossRef

13.

S. Cui and I.-H. Jung: J. Alloys Compd., 2017, vol. 708, pp. 887–902.CrossRef

14.

V. Raghavan: Phase Diagram of Ternary Iron Alloys: Part 1, ASM INTERNATIONAL, Metals Park, OH, 1987, pp. 171–82.

15.

V. Raghavan: J. Phase Equilib. Diffus., 2004, vol. 25, pp. 545–46.CrossRef

16.

V. Raghavan: J. Phase Equilib., 2003, vol. 24, pp. 265–66.CrossRef

17.

V. Raghavan: J. Phase Equilib., 1993, vol. 14, pp. 626–28.CrossRef

18.

E. Yajima: Nippon Kinzoku Gakkai-Si, 1941, vol. 5, pp. 455–61.

19.

A.G.H. Anderson and E.R. Jette: Trans. Am. Soc. Met., 1936, vol. 24, pp. 375–418.

20.

E.I. Gladyshevskii and L.K. Borusevich: Izv. Akad. Nauk SSSR, Met., 1966, pp. 159–64.

21.

H.B. Awais and F.H. Hayes: Phase Transform.—96, 1st Proc. Int. Conf., Islamabad, Pakistan, Sept. 1–3, 1996, pp. 62–66.

22.

H.B. Awais: Thesis, UMIST, Manchester, United Kingdom, 1995.

23.

Z. Li, Z. Zhou, X. Wang, Y. Liu, Y. Wu, M. Zhao, and F. Yin: Int. J. Mater. Res., 2014, vol. 105, pp. 840–46.CrossRef

24.

K. Yamamoto, Y. Kimura, and Y. Mishima: Scripta Mater., 2004, vol. 50, pp. 977–81.CrossRef

25.

M. Yamaguchi, Y. Ymakoshi, and G. Mima: Proc. Int. Conf. Sci. Technol. Iron Steel, 1971, Pt. 2, pp. 1015–19.

26.

J.C.M. Wethmar, D.D. Howat, P.R. Jochens, and O.A.W. Strydom: J. S. Afr. Inst. Mining Met., 1973, vol. 73, pp. 181–83.

27.

V.F. Igushev, N.V. Tolstoguzov, and V.A. Rudenko: Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1975, pp. 46–50.

28.

M.S. Petrushevskii, P.V. Gel’d, and Y.O. Esin: Izv. Vyssh. Uchebn. Zaved., Chern. Metall., 1978, pp. 5–8.

29.

V. Raghavan: Phase Diagrams of Ternary Iron Alloys, Part 6B, Indian Institute of Metals, Calcutta, 1992, pp. 942–47.

30.

V. Raghavan: J. Phase Equilib., 2002, vol. 23, pp. 175–76.CrossRef

31.

V. Raghavan: J. Phase Equilib., Diffus., 2012, vol. 33, pp. 236–37.

32.

N. Lebrun, C. Baetzner, A. Stamou, J. Robinson, and L Rokhlin: Landolt-Börnstein New Series IV/11D4, 2008, pp. 1–17.

33.

U. Zwicker: Z. Metallkd., 1954, vol. 45, pp. 31–35.

34.

P.J. Guichelaar, P.K. Trojan, T. McCluhan, and R.A. Flinn: Met. Trans., 1971, vol. 2, pp. 3305–13.CrossRef

35.

Y.A. Ageev and S.A. Archugov: Izv. Akad. Nauk SSSR, Met., 1984, pp. 78–80.

36.

D. Pierre, M. Peronnet, F. Bosselet, J.C. Viala, and J. Bouix: J. Phase Equilib., 2000, vol. 21, pp. 78–86.CrossRef

37.

F. Löffler, G. Sauthoff, and M. Palm: Int. J. Mater. Res., 2011, vol. 102, pp. 1042–47.CrossRef

38.

H.H. Normann, H. Thoresen, J.E. Tibballs, and C.J. Simensen: Proc. Conf. on Light Metals, Amsterdam, Netherlands, 1990, p. 823.

39.

B.M. Lepinskikh, I.T. Sryvalin, and A.A. Tikhomirov: Z. Fiz. Khim., 1966, vol. 40, pp. 1551–55.

40.

A.T. Dinsdale: CALPHAD, 1991, vol. 15, pp. 317–425.CrossRef

41.

A.D. Pelton and P. Chartrand: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1355–60.CrossRef

42.

A.D. Pelton, S.A. Degterov, G. Eriksson, C. Robelin, and Y. Dessureault: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 651–59.CrossRef

43.

O. Redlich and A.T. Kister: Ind. Eng. Chem., 1948, vol. 40, pp. 345–348.CrossRef

44.

M. Hillert and M. Jarl: CALPHAD, 1978, vol. 2, pp. 227–38.CrossRef

45.

M. Hillert: J. Alloys Compd., 2001, vol. 320, pp. 161–76.CrossRef

46.

C.W. Bale, E. Belisle, P. Chartrand, S.A. Decterov, G. Eriksson, A.E. Gheribi, K. Hack, I.H. Jung, Y.B. Kang, J. Melancon, A.D. Pelton, S. Petersen, C. Robelin, J. Sangster, P. Spencer, and M.A. Van Ende: CALPHAD, 2016, vol. 55, pp. 1–19.CrossRef

47.

J.-P. Harvey: Master’s Thesis, Ecole Polytechnique, Palaiseau, France, 2006.

48.

P. Chartrand: unpublished work, 2006.

49.

Y. Liang, C. Guo, C. Li, and Z. Du: J. Phase Equilib. Diffus., 2009, vol. 30, pp. 462–79.CrossRef

50.

H. Chen, Y. Du, and J.C. Schuster: CALPHAD, 2009, vol. 33, pp. 211–14.CrossRef

Title: Thermodynamic Assessments of the Fe-Si-Cr and Fe-Si-Mg Systems
Authors: Senlin Cui
In-Ho Jung
Publication date: 21-06-2017
Publisher: Springer US
Published in: Metallurgical and Materials Transactions A / Issue 9/2017
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-017-4163-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9/2017

C-Curves for Lengthening of Widmanstätten and Bainitic Ferrite

Modeling and Analysis of High-Energy Ball Milling Through Attritors

Peritectic Solidification Path of the La(Fe,Si)13 Phase in Dual-Phase Directionally Solidified La-Fe-Si Magnetocaloric Alloys

Formation of Fine B2/β + O Structure and Enhancement of Hardness in the Aged Ti2AlNb-Based Alloys Prepared by Spark Plasma Sintering

Microstructural Analyses of ATI 718Plus® Produced by Wire-ARC Additive Manufacturing Process

Morphology of Upper and Lower Bainite with 0.7 Mass Pct C

Premium Partners