Top

Published in:

2014 | OriginalPaper | Chapter

20. Tracking and Removing Modulated Harmonic Components with Spectral Kurtosis and Kalman Filters

Authors : Jean-Luc Dion, Cyrille Stephan, Gaël Chevallier, Hugo Festjens

Published in: Topics in Modal Analysis, Volume 7

Publisher: Springer New York

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This work describes an automatic method for removing modulated sinusoidal components in signals. The method consists in using the Optimized Spectral Kurtosis for initializing Series of Extended Kalman Filters. The first section is an introduction to vibration applications with Kalman Filters and modulated sinusoids. The detection process with OSK is described in the second section. The third section concerns the tracking algorithm with SEKF for amplitude and frequency modulated sinusoidal components. The last section deals with the complete process illustrated with an experimental application on a rotating machine.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

previous chapter Advanced Identification Techniques for Operational Wind Turbine Data

next chapter Vibration Reduction of Brush Cutter

Dion J-L, Tawfiq I, Chevallier G (2012) Sinusoidal component detection: Optimized Spectral Kurtosis for operational modal analysis. Mech Syst Signal Process 26:24–33

Kalman RE (1960) A new approach to linear filtering and prediction problems. Trans Am Soc Mech Eng Ser D – J Basic Eng 82:35–45

Seibold S, Weinert K (1996) A time domain method for the localization of cracks in rotors. J Sound Vib 195:57–73

Wang Z, Yan W, Shao Y (2009) Three-step method for stiffness identification of inter-story shearing structures under ambient excitation. Tsinghua Sci Technol 14:69–74

Ma C-K, Lin D-C, Chang J-M (1999) Estimation of forces generated by a machine mounted upon isolators under operating conditions. J Frankl Inst 336:875–892

Ma C-K, Ho C-C (2004) An inverse method for the estimation of input forces acting on non-linear structural systems. J Sound Vib 275:953–971

Zhan YM, Jardine AKS (2005) Adaptive autoregressive modeling of non-stationary vibration signals under distinct gear states. Part 1: modeling. J Sound Vib 286:429–450

Zhan Y, Mechefske CK (2007) Robust detection of gearbox deterioration using compromised autoregressive modeling and Kolmogorov–Smirnov test statistic. Part I: compromised autoregressive modeling with the aid of hypothesis tests and simulation analysis. Mech Syst Signal Process 21:1953–1982

Zhan Y, Mechefske CK (2007) Robust detection of gearbox deterioration using compromised autoregressive modeling and Kolmogorov–Smirnov test statistic. Part II: experiment and application. Mech Syst Signal Process 21:1983–2011

10.

Shao Y, Mechefske CK (2009) Gearbox vibration monitoring using extended Kalman filters and hypothesis tests. J Sound Vib 325:629–648

11.

Wang G, Luo Z, Qin X, Leng Y, Wang T (2008) Fault identification and classification of rolling element bearing based on time-varying autoregressive spectrum. Mech Syst Signal Process 22:934–947

12.

Al-Zaharnah IT (2006) Suppressing vibrations of machining processes in both feed and radial directions using an optimal control strategy: the case of interrupted cutting. J Mater Process Technol 172:305–310

13.

Dong X-J, Meng G, Peng J-C (2006) Vibration control of piezoelectric smart structures based on system identification technique: numerical simulation and experimental study. J Sound Vib 297:680–693

14.

Marzbanrad J, Ahmadi G, Zohoor H, Hojjat Y (2004) Stochastic optimal preview control of a vehicle suspension. J Sound Vib 275:973–990

15.

Yoshimura T, Edokoro K, Ananthanarayana N (1993) An active suspension model For rail/vehicle systems with preview and stochastic optimal control. J Sound Vib 166:507–519

16.

Bai M, Huang J, Hong M, Su F (2005) Fault diagnosis of rotating machinery using an intelligent order tracking system. J Sound Vib 280: 699–718

17.

Blough JR (2003) Development and analysis of time variant discrete Fourier transform order tracking. Mech Syst Signal Process 17:1185–1199

18.

Guo Y, Tan KK (2009) Order-crossing removal in Gabor order tracking by independent component analysis. J Sound Vib 325:471–488

19.

Pan M-C, Chiu C-C (2006) Investigation on improved Gabor order tracking technique and its applications. J Sound Vib 295:810–826

20.

Pan M-C, Liao S-W, Chiu C-C (2007) Improvement on Gabor order tracking and objective comparison with Vold–Kalman filtering order tracking. Mech Syst Signal Process 21:653–667

21.

Vold H, Leuridan J (1993) High resolution order tracking at extreme slew rates, using Kalman tracking filters SAE Paper No. 931288

22.

Vold H, Herlufsen H (1997) Multi axle order tracking with the Vold–Kalman tracking filter Sound Vib 31(5):30–34

23.

Guo Y, Tan KK (2010) High efficient crossing-order decoupling in Vold–Kalman filtering order tracking based on independent component analysis. Mech Syst Signal Process 24:1756–1766

24.

Pan M-C, Lin Y-F (2006a) Further exploration of Vold–Kalman-filtering order tracking with shaft-speed information–I: theoretical part, numerical implementation and parameter investigations. Mech Syst Signal Process 20:1134–1154

25.

Pan M-C, Lin Y-F (2006b) Further exploration of Vold–Kalman-filtering order tracking with shaft-speed information–II: engineering applications. Mech Syst Signal Process 20:1410–1428

26.

Pan M-C, Wu C-X (2007) Adaptive Vold–Kalman filtering order tracking. Mech Syst Signal Process 21:2957–2969

27.

Wang KS, Heyns PS (2011a) An empirical re-sampling method on intrinsic mode function to deal with speed variation in machine fault diagnostics. Appl Soft Comput 11:5015–5027

28.

Wang KS, Heyns PS (2011b) The combined use of order tracking techniques for enhanced Fourier analysis of order components. Mech Syst Signal Process 25:803–811

29.

Wang KS, Heyns PS (2011c) Application of computed order tracking, Vold–Kalman filtering and EMD in rotating machine vibration. Mech Syst Signal Process 25:416–430

30.

Pan M-C, Wu C-X (2010) Extended angular-velocity Vold–Kalman order tracking. J Dyn Syst Meas Control 132(3) doi:10.1115/1.4001326

31.

Parks TW, Burrus CS (1987) Digital filter design. Wiley, New York. Chapter 7

32.

Randall RB (2001) Cepstrum analysis. In: Ewins D, Rao SS, Braun S (eds) Encyclopedia of vibration. Elsevier, Oxford, pp 216–227

Title: Tracking and Removing Modulated Harmonic Components with Spectral Kurtosis and Kalman Filters
Authors: Jean-Luc Dion
Cyrille Stephan
Gaël Chevallier
Hugo Festjens
Publisher: Springer New York
Book: Topics in Modal Analysis, Volume 7
Print ISBN: 978-1-4614-6584-3

Electronic ISBN: 978-1-4614-6585-0

Copyright Year: 2014
DOI: https://doi.org/10.1007/978-1-4614-6585-0_20

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Premium Partners