Top

Lasers in Manufacturing and Materials Processing

Published in:

13-11-2017

Tribological Behavior of IN718 Superalloy Coating Fabricated by Laser Additive Manufacturing

Authors: Yaocheng Zhang, Qiyong Pan, Li Yang, Ruifeng Li, Jun Dai

Published in: Lasers in Manufacturing and Materials Processing | Issue 4/2017

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The tribological behavior of laser manufactured IN718 superalloy coating are investigated with different applied loads, sliding speeds and lubricating mediums. The wear resistance of laser manufactured IN718 coating is increased by heat treatment due to higher microhardness and homogeneous brittle phase distribution. The principal factors for the wear rate are applied load and lubricating medium. The worn surface of laser manufactured IN718 coating consists of the grooves, crack, wear debris and material delamination generated by the fatigue wear associated with adhesive wear and abrasive wear. The friction coefficients are influenced by the tribological noise decrescence by the tribo-oxidant and the liquid lubricant. The real contact temperature between coating sample and frictional counterpart is higher than the solid-solution temperature of IN718 superalloy, and the effect of surface contact temperature on the orientational microstructure and wear resistance for dry friction and wet friction process is indistinct.

next article Phase Analysis of Laser Direct Etching and Water Assisted Laser Combined Etching of SiC Ceramics

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Miyoshi, K., Sanders, J.H., Hager Jr., C.H., Zabinski, J.S., Vander Wal, R.L., Andrews, R., Street Jr., K.W., Lerch, B.A., Abel, P.B.: Wear behavior of low-cost, lightweight TiC/Ti–6Al–4V composite under fretting: effectiveness of solid-film lubricant counterparts. Tribol. Int. 41, 24–33 (2008)CrossRef

Sue, J.A., Chang, T.P.: Friction and wear behavior of titanium nitride, zirconium nitride and chromium nitride coatings at elevated temperatures. Surf. Coat. Technol. 76–77, 61–69 (1995)CrossRef

Hao, Z., Gao, D., Fan, Y., Han, R.: New observations on tool wear mechanism in dry machining Inconel 718. Int. J. Refract. Met. Hard Mater. 51, 973–979 (2011)

Hong, C., Gu, D., Dai, D., Gasser, A., Weisheit, A., Kelbassa, I., Zhong, M., Poprawe, R.: Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures. Opt. Laser Technol. 54, 98–109 (2013)CrossRef

Aw, P.K., Batchelor, A.W., Loh, N.L.: Failure mechanisms of plasma nitrided Inconel 718 film. Wear. 208, 226–236 (1997)CrossRef

Zhang, P., Zhou, H., Wang, C.T., Liu, Y., Ren, L.Q.: Wear properties of H13 with micron scale and nano scale grains bionic units processed by laser remelting. Opt. Laser Technol. 54, 219–224 (2013)CrossRef

Zhang, H., Zou, Y., Zou, Z., Wu, D.: Microstructure and properties of Fe-based composite coating by laser cladding Fe–Ti–V–Cr–C–CeO2 powder. Opt. Laser Technol. 65, 119–125 (2015)CrossRef

Tan, H., Luo, Z., Li, Y., Yan, F., Duan, R.: Microstructure and wear resistance of Al2O3–M7C3/Fe composite coatings produced by laser controlled reactive synthesis. Opt. Laser Technol. 68, 11–17 (2015)CrossRef

Zhang, Y.C., Li, Z.G., Nie, P.L., Wu, Y.X.: Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating. Surf. Eng. 29, 414–418 (2013)CrossRef

10.

Zhang, Y., Li, Z., Nie, P., Wu, Y.: Effect of heat treatment on niobium segregation of laser-cladded IN718 alloy coating. Metall. Mater. Trans. A. 44, 708–716 (2013)CrossRef

11.

Unal, H., Mimaroglu, A., Arda, T.: Friction and wear performance of some thermoplastic polymers and polymer composites against unsaturated polyester. Appl. Surf. Sci. 252, 8139–8146 (2006)CrossRef

12.

Cheng, J.B., Liang, X.B., Wang, Z.H., Xu, B.S.: Dry sliding friction and wear properties of metallic glass coating and martensite stainless coating. Tribol. Int. 60, 140–146 (2013)CrossRef

13.

Zhong, W., Hu, J.J., Shen, P., Wang, C.Y., Lius, Q.Y.: Experimental investigation between rolling contact fatigue and wear of high-speed and heavy-haul railway and selection of rail material. Wear. 271, 2485–2493 (2011)CrossRef

14.

Wen, P., Feng, Z., Zheng, S.: Formation quality optimization of laser hot wire cladding for repairing martensite precipitation hardening stainless steel. Opt. Laser Technol. 65, 180–188 (2015)CrossRef

15.

Lin, Y., Lin, Y., Chen, Y.: Evolution of the microstructure and tribological performance of Ti–6Al–4V cladding with TiN powder. Mater. Des. 36, 584–589 (2012)CrossRef

16.

Jung, K.H., Lee, H.C., Ajiboye, J.S., Im, Y.T.: Characterization of frictional behavior in cold forging. Tribol. Lett. 37, 353–359 (2010)CrossRef

17.

Huang, C., Zhang, Y., Shen, J., Vilar, R.: Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V alloy. Surf. Coat. Technol. 206, 1389–1395 (2011)CrossRef

18.

Wang, J., Jia, Q., Yuan, X., Wang, S.: Experimental study on friction and wear behaviour of amorphous carbon coatings for mechanical seals in cryogenic environment. Appl. Surf. Sci. 258, 9531–9535 (2012)CrossRef

19.

Liu, F.C., Lin, X., Zhao, W.W., Zhao, X.M., Chen, J., Huang, W.D.: Effects of solution treatment temperature on microstructures and properties of laser solid forming GH4169 Superalloy. Rare Metal Mater. Eng. 39, 1519–1524 (2010)CrossRef

20.

Liu, S., Liu, W., Harooni, M., Ma, J., Kovacevic, R.: Real-time monitoring of laser hot-wire cladding of Inconel 625. Opt. Laser Technol. 62, 124–134 (2014)CrossRef

21.

Brin, C., Rivière, J.P., Eymery, J.P., Villain, J.P.: Structural characterization of wear debris produced during friction between two austenitic stainless steel antagonists. Tribol. Lett. 11, 127–132 (2001)CrossRef

22.

Liu, G., An, Y., Chen, J., Hou, G., Chen, J.: Influence of heat treatment on microstructure and sliding wear of thermally sprayed Fe-based metallic glass coatings. Tribol. Lett. 46, 131–138 (2012)CrossRef

23.

Zhang, Y.C., Li, Z., Nie, P., Wu, Y.: Carbide and nitride precipitation during laser cladding of Inconel 718 alloy coatings. Opt. Laser Technol. 52, 30–36 (2013)CrossRef

24.

Zhang, Y.C., Yang, L., Dai, J., Huang, Z., Meng, T.: Grain growth of Ni-based superalloy IN718 coating fabricated by pulsed laser deposition. Opt. Laser Technol. 80, 220–226 (2016)CrossRef

25.

Zhang, Y.C., Yang, L., Chen, T.Y., Zhang, W.Y., Huang, X.W., Dai, J.: Investigation on the optimized heat treatment procedure for laser fabricated IN718 alloy. Opt. Laser Technol. 97, 172–179 (2017)CrossRef

Title: Tribological Behavior of IN718 Superalloy Coating Fabricated by Laser Additive Manufacturing
Authors: Yaocheng Zhang
Qiyong Pan
Li Yang
Ruifeng Li
Jun Dai
Publication date: 13-11-2017
Publisher: Springer US
Published in: Lasers in Manufacturing and Materials Processing / Issue 4/2017
Print ISSN: 2196-7229
Electronic ISSN: 2196-7237
DOI: https://doi.org/10.1007/s40516-017-0043-1

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2017

Magnetic-Force-Assisted Straightening of Bent Mild Steel Strip by Laser Irradiation

Phase Analysis of Laser Direct Etching and Water Assisted Laser Combined Etching of SiC Ceramics

Accurate Micro-Tool Manufacturing by Iterative Pulsed-Laser Ablation

Effect of Laser Power on Metallurgical, Mechanical and Tribological Characteristics of Hardfaced Surfaces of Nickel-Based Alloy

Author Correction: Accurate Micro-Tool Manufacturing by Iterative Pulsed-Laser Ablation

Premium Partners