Top

Tribology Letters

Published in:

01-12-2018 | Original Paper

Tribological Behavior of Multi-scaled Patterned Surfaces Machined Through Inclined End Milling and Micro Shot Blasting

Authors: Jesus Resendiz, Philip Egberts, Simon S. Park

Published in: Tribology Letters | Issue 4/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Surface texturing is one mechanism that friction coefficients in both dry and lubricated contacts can be reduced compared with untextured, flat surfaces. End milling and shot blasting are two processes used to produce surface textures, including monolithic textures that have one type of surface feature, as well as multi-scale roughness features when two texturing processes are sequentially used. In such surfaces, we have observed that surface texturing decreases the measured friction coefficient under lubricated conditions, and that greater reductions in the friction coefficient are observed for those surfaces that had been both end milled and shot blasted. Simulations replicating the experiments suggest that the greatest factor contributing to the reduced friction observed for the textured surfaces is a result of increased fluid pressure in the contact region resulting from cavitation of the lubricant. However, a substantial decrease in the depth of the dimples on worn surfaces was also observed, suggesting that entrapment of wear particles within the surface texture features may also influence the measured friction coefficient. Alongside friction measurements, analysis of the wear track depth showed that surface texturing also has a beneficial influence on the calculated Archard wear coefficient.

previous article Characterization of the Adsorption Mechanism of Manganese Phosphate Conversion Coating Derived Tribofilms

next article Dynamic Characterisation of Rectangular Aerostatic Pads with Multiple Inherent Orifices

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Bruzzone, A.A.G., Costa, H.L., Lonardo, P.M., Lucca, D.A.: Advances in engineered surfaces for functional performance. CIRP Ann. - Manuf. Technol. 57, 750–769 (2008). https://doi.org/10.1016/j.cirp.2008.09.003 CrossRef

Erdemir, A.: Review of engineered tribological interfaces for improved boundary lubrication. Tribol. Int. 38, 249–256 (2005). https://doi.org/10.1016/j.triboint.2004.08.008 CrossRef

Patankar, N.A.: Supernucleating surfaces for nucleate boiling and dropwise condensation heat transfer. Soft Matter. 6, 1613 (2010). https://doi.org/10.1039/b923967g CrossRef

Matsumura, T., Takahashi, S.: Machining of micro dimples in milling for functional surfaces, In: Proceedings of the 14th International ESAFORM Conference on Material Forming, pp. 567–572 (2011)

Etsion, I.: State of the art in laser surface texturing. J. Tribol. 127, 248 (2005). https://doi.org/10.1115/1.1828070 CrossRef

Resendiz, J., Graham, E., Egberts, P., Park, S.S.: Directional friction surfaces through asymmetrically shaped dimpled surfaces patterned using inclined flat end milling, Tribol. Int. 91 (2015) 67–73CrossRef

Graham, E., Park, C.I., Park, S.S.: Force modeling and applications of inclined ball end milling of micro-dimpled surfaces. Int. J. Adv. Manuf. Technol. 70, 689–700 (2013). https://doi.org/10.1007/s00170-013-5310-5 CrossRef

Chae, J., Park, S.S., Freiheit, T.: Investigation of micro-cutting operations. Int. J. Mach. Tools Manuf. 46, 313–332 (2006). https://doi.org/10.1016/j.ijmachtools.2005.05.015 CrossRef

Greiner, C., Del Campo, A., Arzt, E.: Adhesion of bioinspired micropatterned surfaces: effects of pillar radius, aspect ratio, and preload. Langmuir. 23, 3495–3502 (2007). https://doi.org/10.1021/la0633987 CrossRef

10.

Kovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., Etsion, I.: The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact. Tribol. Int. 38, 219–225 (2005). https://doi.org/10.1016/j.triboint.2004.08.004 CrossRef

11.

Aspinwall, D., Wise, M., Stout, K.: Electrical discharge texturing. Int. J. 32, 183–193 (1992). http://www.sciencedirect.com/science/article/pii/089069559290077T. Accessed Dec 5 2014CrossRef

12.

Tseng, A.A.: Recent developments in micromilling using focused ion beam technology. J. Micromech. Microeng. 14, R15–R34 (2004). https://doi.org/10.1088/0960-1317/14/4/R01 CrossRef

13.

Greiner, C., Merz, T., Braun, D., Codrignani, A., Magagnato, F.: Optimum dimple diameter for friction reduction with laser surface texturing: the effect of velocity gradient, Surf. Topogr. Metrol. Prop. 3 (2015). https://doi.org/10.1088/2051-672X/3/4/044001

14.

Meng, F., Zhou, R., Davis, T., Cao, J., Wang, Q.J., Hua, D., Liu, J.: Study on effect of dimples on friction of parallel surfaces under different sliding conditions. Appl. Surf. Sci. 256, 2863–2875 (2010). https://doi.org/10.1016/j.apsusc.2009.11.041 CrossRef

15.

Galda, L., Pawlus, P., Sep, J.: Dimples shape and distribution effect on characteristics of Stribeck curve. Tribol. Int. 42, 1505–1512 (2009). https://doi.org/10.1016/j.triboint.2009.06.001 CrossRef

16.

Ramesh, A., Akram, W., Mishra, S.P., Cannon, A.H., Polycarpou, A.A., King, W.P.: Friction characteristics of microtextured surfaces under mixed and hydrodynamic lubrication. Tribol. Int. 57, 170–176 (2013). https://doi.org/10.1016/j.triboint.2012.07.020 CrossRef

17.

Li, K., Yao, Z., Hu, Y., Gu, W.: Friction and wear performance of laser peen textured surface under starved lubrication. Tribol. Int. 77, 97–105 (2014). https://doi.org/10.1016/j.triboint.2014.04.017 CrossRef

18.

Lu, X., Khonsari, M.M.: An experimental investigation of dimple effect on the stribeck curve of journal bearings. Tribol. Lett. 27, 169–176 (2007). https://doi.org/10.1007/s11249-007-9217-x CrossRef

19.

Yamakiri, H., Sasaki, S., Kurita, T., Kasashima, N.: Effects of laser surface texturing on friction behavior of silicon nitride under lubrication with water. Tribol. Int. 44, 579–584. https://doi.org/10.1016/j.triboint.2010.11.002 (2011)CrossRef

20.

Gropper, D., Wang, L., Harvey, T.J.: Hydrodynamic lubrication of textured surfaces: a review of modeling techniques and key findings. Tribol. Int. 94, 509–529 (2016). https://doi.org/10.1016/j.triboint.2015.10.009 CrossRef

21.

Vladescu, S.C., Olver, A.V., Pegg, I.G., Reddyhoff, T.: The effects of surface texture in reciprocating contacts - An experimental study. Tribol. Int. 82, 28–42 (2015). https://doi.org/10.1016/j.triboint.2014.09.015 CrossRef

22.

Voevodin, A.A., Zabinski, J.S.: Laser surface texturing for adaptive solid lubrication. Wear. 261, 1285–1292 (2006). https://doi.org/10.1016/j.wear.2006.03.013 CrossRef

23.

Wang, X., Kato, K., Adachi, K., Aizawa, K.: Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water. Tribol. Int. 36, 189–197 (2003). https://doi.org/10.1016/S0301-679X(02)00145-7 CrossRef

24.

Qiu, Y., Khonsari, M.M.: Experimental investigation of tribological performance of laser textured stainless steel rings. Tribol. Int. 44, 635–644 (2011). https://doi.org/10.1016/j.triboint.2011.01.003 CrossRef

25.

Jeong-Du Kim and Kang, Y.-H.: High-speed machining of aluminium using diamond end mills. Int. J. Mnch. Tools Manufact. 37, 1155–1165 (1997)CrossRef

26.

Heaney, P.J., Sumant, A.V., Torres, C.D., Carpick, R.W., Pfefferkorn, F.E.: Diamond coatings for micro end mills: enabling the dry machining of aluminum at the micro-scale. Diam. Relat. Mater. 17, 223–233 (2008). https://doi.org/10.1016/j.diamond.2007.12.009 CrossRef

27.

ASM Handbook Volume 2: properties and selection: nonferrous alloys and special-purpose materials, ASM International, 1990

28.

Dobrovinskaya Elena, R., Leonid, A.: Lytvynov. Valerian Pishchik, Sapphire: Material, Manufacturing, Applications, Springer Science & Business Media, (2009). https://doi.org/10.1007/978-0-387-85695-7 CrossRef

29.

Profito, F.J., Zachariadis, D.C., Tomanik, E.: One dimensional mixed lubrication regime model for textured piston rings, (2011)

30.

Prófito, F.J.: Modelagem Unidimensional Do Regime Misto De Lubrificação Aplicada a Superfícies Texturizadas, (2010)

31.

Greenwood, J.A., Tripp, J.H., The contact of two nominally flat rough surfaces, Proc. Inst. Mech. Eng. (1970). https://doi.org/10.1243/PIME CrossRef

32.

Greiner, C., Schäfer, M., Popp, U., Gumbsch, P.: Contact splitting and the effect of dimple depth on static friction of textured surfaces. ACS Appl. Mater. Interfaces. 6, 7986–7990 (2014). https://doi.org/10.1021/am500879m CrossRef

33.

Hu, T., Hu, L., Ding, Q., The effect of laser surface texturing on the tribological behavior of Ti-6Al-4V, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 226:854–863 (2012) https://doi.org/10.1177/1350650112450801 CrossRef

34.

Ito, H., Kaneda, K., Yuhta, T., Nishimura, I., Yasuda, K., Matsuno, T.: Reduction of polyethylene wear by concave dimples on the frictional surface in artificial hip joints. J. Arthroplasty. 15, 332–338 (2000). https://doi.org/10.1016/S0883-5403(00)90670-3 CrossRef

35.

Nakano, M., Korenaga, A., Korenaga, A., Miyake, K., Murakami, T., Ando, Y., Usami, H., Sasaki, S.: Applying micro-texture to cast iron surfaces to reduce the friction coefficient under lubricated conditions. Tribol. Lett. 28, 131–137 (2007). https://doi.org/10.1007/s11249-007-9257-2 CrossRef

36.

Zhang, B., Huang, W., Wang, J., Wang, X.: Comparison of the effects of surface texture on the surfaces of steel and UHMWPE. Tribol. Int. 65, 138–145 (2013). https://doi.org/10.1016/j.triboint.2013.01.004 CrossRef

37.

Brizmer, V., Kligerman, Y., Etsion, I.: A laser surface textured parallel thrust bearing. Tribol. Trans. 46, 397–403 (2003). https://doi.org/10.1080/05698190490426007 CrossRef

38.

Cupillard, S., Glavatskih, S., Cervantes, M.J., Computational fluid dynamics analysis of a journal bearing with surface texturing, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 222:97–107 (2008) https://doi.org/10.1243/13506501JET319 CrossRef

39.

Dobrica, M.B., Fillon, M., Pascovici, M.D., Cicone, T., Optimizing surface texture for hydrodynamic lubricated contacts using a mass-conserving numerical approach, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol. 224:737–750 (2010) https://doi.org/10.1243/13506501JET673 CrossRef

40.

Meng, F.M., Yang, T., Preliminary study on mechanism of cavitation in lubricant of textured sliding bearing, Proc. Inst. Mech. Eng. Part J-Journal Eng. Tribol. 227: 695–708 (2013) https://doi.org/10.1177/1350650112468560 CrossRef

41.

Shinkarenko, A., Kligerman, Y., Etsion, I.: The effect of surface texturing in soft elasto-hydrodynamic lubrication. Tribol. Int. 42, 284–292 (2009). https://doi.org/10.1016/j.triboint.2008.06.008 CrossRef

42.

Zhang, J., Meng, Y.: Direct observation of cavitation phenomenon and hydrodynamic lubrication analysis of textured surfaces. Tribol. Lett. 46, 147–158 (2012). https://doi.org/10.1007/s11249-012-9935-6 CrossRef

43.

Tang, W., Zhou, Y., Zhu, H., Yang, H.: The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact. Appl. Surf. Sci. 273, 199–204 (2013). https://doi.org/10.1016/j.apsusc.2013.02.013 CrossRef

44.

Křupka, I., Poliščuk, R., Hartl, M.: Behavior of thin viscous boundary films in lubricated contacts between micro-textured surfaces. Tribol. Int. 42, 535–541 (2009). https://doi.org/10.1016/j.triboint.2008.03.013 CrossRef

45.

Křupka, I., Hartl, M.: The influence of thin boundary films on real surface roughness in thin film, mixed EHD contact. Tribol. Int. 40, 1553–1560 (2007). https://doi.org/10.1016/j.triboint.2006.10.008 CrossRef

46.

Křupka, I., Hartl, M.: The effect of surface texturing on thin EHD lubrication films. Tribol. Int. 40, 1100–1110 (2007). https://doi.org/10.1016/j.triboint.2006.10.007 CrossRef

47.

Mourier, L., Lubrecht, A.A., Donnet C. Mazuyer, D. Transient increase of film thickness in micro-textured EHL contacts, Tribol. Int. 39, 1745–1756 (2006). https://doi.org/10.1016/j.triboint.2006.02.037 CrossRef

48.

Rupert, T.J., Schuh, C.A.: Sliding wear of nanocrystalline Ni-W: structural evolution and the apparent breakdown of Archard scaling. Acta Mater. 58, 4137–4148 (2010). https://doi.org/10.1016/j.actamat.2010.04.005 CrossRef

49.

Mandal, D., Dutta, B.K., Panigrahi, S.C.: Wear and friction behavior of stir cast aluminium-base short steel fiber reinforced composites. Wear. 257, 654–664 (2004). https://doi.org/10.1016/j.wear.2004.02.006 CrossRef

50.

Kim, D.E., Cha, K.H., Sung, I.H., Bryan, J.: Design of surface micro-structures for friction control in micro-systems applications. CIRP Ann. - Manuf. Technol. 51, 495–498 (2002). https://doi.org/10.1016/S0007-8506(07)61569-8 CrossRef

51.

Borghi, A., Gualtieri, E., Marchetto, D., Moretti, L., Valeri, S.: Tribological effects of surface texturing on nitriding steel for high-performance engine applications. Wear. 265, 1046–1051 (2008). https://doi.org/10.1016/j.wear.2008.02.011 CrossRef

52.

Xing, Y., Deng, J., Wu, Z., Cheng, H.: Effect of regular surface textures generated by laser on tribological behavior of Si3N4/TiC ceramic. Appl. Surf. Sci. 265, 823–832 (2013). https://doi.org/10.1016/j.apsusc.2012.11.127 CrossRef

53.

Ryk, G., Etsion, I.: Testing piston rings with partial laser surface texturing for friction reduction. Wear. 261, 792–796 (2006). https://doi.org/10.1016/j.wear.2006.01.031 CrossRef

54.

Kovalchenko, A., Ajayi, O., Erdemir, A., Fenske, G., Etsion, I.: The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic. Tribol. Trans. 47, 299–307 (2004). https://doi.org/10.1080/05698190490440902 CrossRef

55.

Ryk, G., Kligerman, Y., Etsion, I.: Experimental investigation of laser surface texturing for reciprocating automotive components. Tribol. Trans. 45, 444–449 (2002). https://doi.org/10.1080/10402000208982572 CrossRef

56.

Costa, H.L., Hutchings, I.M.: Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribol. Int. 40, 1227–1238 (2007). https://doi.org/10.1016/j.triboint.2007.01.014 CrossRef

57.

Yu, H., Wang, X., Zhou, F.: Geometric shape effects of surface texture on the generation of hydrodynamic pressure between conformal contacting surfaces. Tribol. Lett. 37, 123–130 (2010). https://doi.org/10.1007/s11249-009-9497-4 CrossRef

58.

Braun, D., Greiner, C., Schneider, J., Gumbsch, P.: Efficiency of laser surface texturing in the reduction of friction under mixed lubrication. Tribol. Int. 77, 142–147 (2014). https://doi.org/10.1016/j.triboint.2014.04.012 CrossRef

59.

Liew, K.W., Kok, C.K., Ervina, M.N., Efzan: Effect of EDM dimple geometry on friction reduction under boundary and mixed lubrication. Tribol. Int. 101, 1–9 (2016). https://doi.org/10.1016/j.triboint.2016.03.029 CrossRef

60.

Wakuda, M., Yamauchi, Y., Kanzaki, S., Yasuda, Y.: Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact. Wear. 254, 356–363 (2003). https://doi.org/10.1016/S0043-1648(03)00004-8 CrossRef

61.

Vilhena, L.M., Podgornik, B., Vižintin, J., Možina, J.: Influence of texturing parameters and contact conditions on tribological behavior of laser textured surfaces. Meccanica. 46, 567–575 (2011). https://doi.org/10.1007/s11012-010-9316-x CrossRef

62.

Wang, X., Liu, W., Zhou, F., Zhu, D.: Preliminary investigation of the effect of dimple size on friction in line contacts. Tribol. Int. 42, 1118–1123 (2009). https://doi.org/10.1016/j.triboint.2009.03.012 CrossRef

Title: Tribological Behavior of Multi-scaled Patterned Surfaces Machined Through Inclined End Milling and Micro Shot Blasting
Authors: Jesus Resendiz
Philip Egberts
Simon S. Park
Publication date: 01-12-2018
Publisher: Springer US
Published in: Tribology Letters / Issue 4/2018
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-018-1086-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2018

Use of FIB to Study ZDDP Tribofilms

Theoretical and Finite Element Analysis of Static Friction Between Multi-Scale Rough Surfaces

Graphene Nanoplatelet (GNP)-Incorporated AZ31 Magnesium Nanocomposite: Microstructural, Mechanical and Tribological Properties

Effect of Steel Counterface on the Dry Sliding Behaviour of a Cu-Based Metal Matrix Composite

Structural, Mechanical, and Tribological Properties of WS2-Al Nanocomposite Film for Space Application

In Situ Observation of Heat Generation Behaviour on Steel Surface During Scuffing Process

Premium Partners