Top

Tribology Letters

Published in:

01-12-2014 | Original Paper

Tribological Behavior of New Martensitic Stainless Steels Using Scratch and Dry Wear Test

Authors: A. Dalmau, W. Rmili, D. Joly, C. Richard, A. Igual-Muñoz

Published in: Tribology Letters | Issue 3/2014

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This paper focuses on the tribological characterization of new martensitic stainless steels by two different tribological methods (scratch and dry wear tests) and their comparison to the austenitic standard stainless steel AISI 316L. The scratch test allows obtaining critical loads, scratch friction coefficients, scratch hardness and specific scratch wear rate, and the dry wear test to quantify wear volumes. The damage has been studied by ex situ scanning electron microscopy. Wear resistance was related to the hardness and the microstructure of the studied materials, where martensitic stainless steels exhibit higher scratch wear resistance than the austenitic one, but higher hardness of the martensitic alloys did not give better scratch resistance when comparing with themselves. It has been proved it is possible to evaluate the scratch wear resistance of bulk stainless steels using scratch test. The austenitic material presented lower wear volume than the martensitic ones after the dry wear test due to phase transformation and the hardening during sliding.

previous article Leonardo da Vinci’s Friction Experiments: An Old Story Acknowledged and Repeated

next article Tribological Performance of Attapulgite Nano-fiber/Spherical Nano-Ni as Lubricant Additive

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Kwok, C.T., Lo, K.H., Cheng, F.T., Man, H.C.: Effect of processing conditions on the corrosion performance of laser surface-melted AISI 440C martensitic stainless steel. Surf. Coat. Technol. 166, 221–230 (2003)CrossRef

Cheng, Z., Li, C.X., Dong, H., Bell, T.: Low temperature plasma nitrocarburising of AISI 316 austenitic stainless steel. Surf. Coat. Technol. 191, 195–200 (2005)CrossRef

Ma, X.P., Wang, L.J., Liu, C.M., Subramanian, S.V.: Microstructure and properties of 13Cr5Ni1Mo0.025Nb0.09V0.06 N super martensitic stainless steel. Mater. Sci. Eng., A 539, 271–279 (2012)CrossRef

Thibault, D., Bocher, P., Thomas, M.: Residual stress and microstructure in welds of 13%Cr–4%Ni martensitic stainless steel. J. Mater. Process. Technol. 209, 2195–2202 (2009)CrossRef

Li, C.X., Bell, T.: Corrosion properties of plasma nitrided AISI 410 martensitic stainless steel in 3.5 % NaCl and 1 % HCl aqueous solutions. Corros. Sci. 48, 2036–2049 (2006)CrossRef

Puli, R., Janaki Ram, G.D.: Microstructures and properties of friction surfaced coatings in AISI 440C martensitic stainless steel. Surf. Coat. Technol 207, 310–318 (2012)CrossRef

Garcideandrés, C., Caruana, G., Alvarez, L.F.: Control of M23C6 carbides in 0.45C–13Cr martensitic stainless steel by means of three representative heat treatment parameters. Mater. Sci. Eng., A 241, 211–215 (1998)CrossRef

Mahmoudi, A., Ghavidel, M.R.Z., Nedjad, S.H., Heidarzadeh, A., Ahmadabadi, M.N.: Aging behavior and mechanical properties of maraging steels in the presence of submicrocrystalline Laves phase particles. Mater. Charact. 62, 976–981 (2011)CrossRef

Meshram, S.D., Madhusudhan Reddy, G., Pandey, S.: Friction stir welding of maraging steel (Grade-250). Mater. Des. 49, 58–64 (2013)CrossRef

10.

Jiang, H., Browning, R., Sue, H.-J.: Understanding of scratch-induced damage mechanisms in polymers. Polymer (Guildf). 50, 4056–4065 (2009)CrossRef

11.

Bull, S.J., Berasetegui, E.G.: An overview of the potential of quantitative coating adhesion measurement by scratch testing. Tribol. Int. 39, 99–114 (2006)CrossRef

12.

Rodrigo, A., Ichimura, H.: Analytical correlation of hardness and scratch adhesion for hard films. Surf. Coat. Technol. 148, 8–17 (2001)CrossRef

13.

Rudermann, Y., Iost, A., Bigerelle, M.: Scratch tests to contribute designing performance maps of multilayer polymeric coatings. Tribol. Int. 44, 585–591 (2011)CrossRef

14.

Browning, R., Sue, H.-J., Minkwitz, R., Charoensirisomboon, P.: Effects of acrylonitrile content and molecular weight on the scratch behavior of styrene-acrylonitrile random copolymers. Polym. Eng. Sci. 51, 2282–2294 (2011)CrossRef

15.

Petit, F., Ott, C., Cambier, F.: Multiple scratch tests and surface-related fatigue properties of monolithic ceramics and soda lime glass. J. Eur. Ceram. Soc. 29, 1299–1307 (2009)CrossRef

16.

Friedrich, K., Sue, H.J., Liu, P., Almajid, A.A.: Scratch resistance of high performance polymers. Tribol. Int. 44, 1032–1046 (2011)CrossRef

17.

Xiang, C., Sue, H.J., Chu, J., Coleman, B.: Scratch behavior and material property relationship in polymers. J. Polym. Sci., Part B: Polym. Phys. 39, 47–59 (2001)CrossRef

18.

Choi, W.-J., Lee, J.H., Weon, J.-I.: Effects of photodegradation and thermal ageing on the scratch behavior of uncoated thermoplastic olefin. Tribol. Int. 67, 90–97 (2013)CrossRef

19.

Bull, S.J.: Failure mode maps in the thin film scratch adhesion test. Tribol. Int. 30, 491–498 (1997)CrossRef

20.

Bull, S.J.: Can scratch testing be used as a model for the abrasive wear of hard coatings? Wear 233–235, 412–423 (1999)CrossRef

21.

Sander, T., Tremmel, S., Wartzack, S.: A modified scratch test for the mechanical characterization of scratch resistance and adhesion of thin hard coatings on soft substrates. Surf. Coat. Technol. 206, 1873–1878 (2011)CrossRef

22.

Lin, J.-S., Zhou, Y.: Can scratch tests give fracture toughness? Eng. Fract. Mech. 109, 161–168 (2013)CrossRef

23.

Akono, A.-T., Ulm, F.-J.: Scratch test model for the determination of fracture toughness. Eng. Fract. Mech. 78, 334–342 (2011)CrossRef

24.

Beake, B.D., Liskiewicz, T.W.: Comparison of nano-fretting and nano-scratch tests on biomedical materials. Tribol. Int. 63, 123–131 (2013)CrossRef

25.

ASTM International, ASTM C1624–05. Standard test method for adhesion making potentiostatic and potentiodynamic anodic polarization measurements, 2010: ASTM International, ASTM C1624–05. Standard test method for adhesion making potentiostatic and potentiodynamic anodic polarization measurements, 2010

26.

Kurkcu, P., Andena, L., Pavan, A.: An experimental investigation of the scratch behaviour of polymers: 1. Influence of rate-dependent bulk mechanical properties. Wear 290–291, 86–93 (2012)CrossRef

27.

Francois, R.: Métallurgie et traitement thermique de nouveaux aciers maraging. Trait. Therm. 390, 51–56 (2008)

28.

Samuels, L.E.: Light Microscopy of Carbon Steels. Materials Park, Ohio: ASM International, c1999. (199)AD

29.

Tsakiris, V., Edmonds, D.V.: Martensite and deformation twinning in austenitic steels. Mater. Sci. Eng., A 273–275, 430–436 (1999)CrossRef

30.

Tong, Z., Ding, C., Yan, D.: A fracture model for wear mechanism in plasma sprayed ceramic coating materials. Wear 155, 309–316 (1992)CrossRef

31.

Vargonen, M., Yang, Y., Huang, L., Shi, Y.: Molecular simulation of tip wear in a single asperity sliding contact. Wear 307, 150–154 (2013)CrossRef

32.

Farias, M.C.M., Souza, R.M., Sinatora, A., Tanaka, D.K.: The influence of applied load, sliding velocity and martensitic transformation on the unlubricated sliding wear of austenitic stainless steels. Wear 263, 773–781 (2007)CrossRef

33.

Zandrahimi, M., Bateni, M.R., Poladi, A., Szpunar, J.A.: The formation of martensite during wear of AISI 304 stainless steel. Wear 263, 674–678 (2007)CrossRef

34.

Misra, R.D.K., Venkatsurya, P., Wu, K.M., Karjalainen, L.P.: Ultrahigh strength martensite–austenite dual-phase steels with ultrafine structure: the response to indentation experiments. Mater. Sci. Eng., A 560, 693–699 (2013)CrossRef

35.

Song, E.P., Hwang, B., Lee, S., Kim, N.J., Ahn, J.: Correlation of microstructure with hardness and wear resistance of stainless steel blend coatings fabricated by atmospheric plasma spraying. Mater. Sci. Eng., A 429, 189–195 (2006)CrossRef

Title: Tribological Behavior of New Martensitic Stainless Steels Using Scratch and Dry Wear Test
Authors: A. Dalmau
W. Rmili
D. Joly
C. Richard
A. Igual-Muñoz
Publication date: 01-12-2014
Publisher: Springer US
Published in: Tribology Letters / Issue 3/2014
Print ISSN: 1023-8883
Electronic ISSN: 1573-2711
DOI: https://doi.org/10.1007/s11249-014-0429-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 3/2014

Tribological Performance of Attapulgite Nano-fiber/Spherical Nano-Ni as Lubricant Additive

Publisher’s Note

Stick–Slip Friction of Stainless Steel in Sodium Dodecyl Sulfate Aqueous Solution in the Boundary Lubrication Regime

Leonardo da Vinci’s Friction Experiments: An Old Story Acknowledged and Repeated

Experimental Investigation of Lubrication Film Starvation of Polyalphaolefin Oil at High Speeds

Localized Boundary Effect on Elastohydrodynamic Lubricated Film Shape

Premium Partners