Top

Journal of Material Cycles and Waste Management

Published in:

08-02-2019 | ORIGINAL ARTICLE

Use of raw-state bottom ash for aggregates in construction materials

Authors: Jin Young Yoon, Jun Young Lee, Jae Hong Kim

Published in: Journal of Material Cycles and Waste Management | Issue 4/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

The recycling of raw-state bottom ash as it is holds an advantage from an economic and environmental standpoint in that it omits pre-processes such as milling and wetting. Its physical and chemical properties are first characterized for the purpose, and then the use of raw-state bottom ash for aggregates in construction materials is proposed. Preplaced aggregate concrete or dry-mixing concrete scheme can be selectively applied according to the particle size requirement of bottom ash aggregate. Preplaced bottom ash aggregate concrete is produced by placing the bottom ash aggregate in formwork and injecting grout to fill the voids. To ensure the injectability of the grout, relatively large-sized particles, greater than 5 mm, are recommended to be used. In the case of dry-mixing concrete, this is originally designed for manufacturing concrete masonry units and concrete blocks with a low water-to-cement ratio and consolidated zero-slump concrete using a mechanized vibrating mold. The experimental results show that bottom ash aggregate concrete has moderate compressive strength with a low density.

previous article Quantitative phase analysis of fly ash of municipal solid waste by X-ray powder diffractometry/Rietveld refinement

next article Life cycle assessment of paper and plastic packaging waste in landfill, incineration, and gasification-pyrolysis

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Aggarwal P, Aggarwal Y, Gupta SM (2007) Effect of bottom ash as replacement of fine aggregates in concrete. Asian J Civ Eng (Build Housing) 8:49–62

Chindaprasirt P, Jaturapitakkul C, Chalee W, Rattanasak U (2009) Comparative study on the characteristics of fly ash and bottom ash geopolymers. Waste Manag 29:539–543. https://doi.org/10.1016/j.wasman.2008.06.023 CrossRef

Kim HK, Lee HK (2015) Coal bottom ash in field of civil engineering: a review of advanced applications and environmental considerations. KSCE J Civ Eng 19:1802–1818. https://doi.org/10.1007/s12205-015-0282-7 CrossRef

Cheriaf M, Rocha JC, Péra J (1999) Pozzolanic properties of pulverized coal combustion bottom ash. Cem Concr Res 29:1387–1391. https://doi.org/10.1016/S0008-8846(99)00098-8 CrossRef

Sathonsaowaphak A, Chindaprasirt P, Pimraksa K (2009) Workability and strength of lignite bottom ash geopolymer mortar. J Hazard Mater 168:44–50. https://doi.org/10.1016/j.jhazmat.2009.01.120 CrossRef

Jaturapitakkul C, Cheerarot R (2003) Development of Bottom Ash as Pozzolanic Material. J Mater Civ Eng 15:48–53CrossRef

Ul Haq E, Padmanabhan SK, Licciulli A (2014) Synthesis and characteristics of fly ash and bottom ash based geopolymers—a comparative study. Ceram Int 40:2965–2971. https://doi.org/10.1016/j.ceramint.2013.10.012 CrossRef

Canpolat F, Yılmaz K, Köse M et al (2004) Use of zeolite, coal bottom ash and fly ash as replacement materials in cement production. Cem Concr Res 34:731–735. https://doi.org/10.1016/S0008-8846(03)00063-2 CrossRef

Pera J, Coutaz L, Ambroise J, Chababbet M (1997) use of incinerator bottom ash in concrete. Cem Concr Res 27:1–5CrossRef

10.

Singh M, Siddique R (2014) Strength properties and micro-structural properties of concrete containing coal bottom ash as partial replacement of fine aggregate. Constr Build Mater 50:246–256. https://doi.org/10.1016/J.CONBUILDMAT.2013.09.026 CrossRef

11.

Rafieizonooz M, Mirza J, Salim MR et al (2016) Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement. Constr Build Mater 116:15–24CrossRef

12.

Bai Y, Darcy F, Basheer PAM (2005) Strength and drying shrinkage properties of concrete containing furnace bottom ash as fine aggregate. Constr Build Mater 19:691–697CrossRef

13.

O’Malley J, Abdelgader H (2010) Investigation into viability of using two-stage (pre-placed aggregate) concrete in Irish setting. Front Archit Civ Eng China 4:127–132CrossRef

14.

Najjar MF, Soliman AM, Nehdi ML (2014) Critical overview of two-stage concrete: Properties and applications. Constr Build Mater 62:47–58. https://doi.org/10.1016/j.conbuildmat.2014.03.021 CrossRef

15.

Yoon JY, Kim JH, Hwang YY, Shin DK (2015) Lightweight concrete produced using a two-stage casting process. Materials (Basel) 8:1384–1397. https://doi.org/10.3390/ma8041384 CrossRef

16.

Ling T-C (2012) Effects of compaction method and rubber content on the properties of concrete paving blocks. Constr Build Mater 28:164–175. https://doi.org/10.1016/J.CONBUILDMAT.2011.08.069 CrossRef

17.

Poon C-S, Kou S, Wan H, Etxeberria M (2009) Properties of concrete blocks prepared with low grade recycled aggregates. Waste Manag 29:2369–2377. https://doi.org/10.1016/J.WASMAN.2009.02.018 CrossRef

18.

Poon CS, Kou SC, Lam L (2002) Use of recycled aggregates in molded concrete bricks and blocks. Constr Build Mater 16:281–289. https://doi.org/10.1016/S0950-0618(02)00019-3 CrossRef

19.

Poon CS, Lam CS (2008) The effect of aggregate-to-cement ratio and types of aggregates on the properties of pre-cast concrete blocks. Cem Concr Compos 30:283–289. https://doi.org/10.1016/J.CEMCONCOMP.2007.10.005 CrossRef

20.

PANalytical X’Pert HighScore Plus v3.0

21.

Allmann R, Hinek R (2007) The introduction of structure types into the Inorganic Crystal Structure Database ICSD. Acta Crystallogr A 63:412–417CrossRef

22.

Criado M, Fernández-Jiménez A, De La Torre AG et al (2007) An XRD study of the effect of the SiO2/Na2O ratio on the alkali activation of fly ash. Cem Concr Res 37:671–679. https://doi.org/10.1016/j.cemconres.2007.01.013 CrossRef

23.

ul Haq E, Kunjalukkal Padmanabhan S, Licciulli A (2014) Synthesis and characteristics of fly ash and bottom ash based geopolymers–a comparative study. Ceram Int 40:2965–2971. https://doi.org/10.1016/j.ceramint.2013.10.012 CrossRef

24.

Liu X, Chia KS, Zhang M-H (2011) Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete. Constr Build Mater 25:335–343. https://doi.org/10.1016/J.CONBUILDMAT.2010.06.020 CrossRef

25.

Dhir RK, Hubbard FH, L.Munday JG et al (1988) Contribution of PFA to concrete workability and strength development. Cem Concr Res 18:277–289. https://doi.org/10.1016/0008-8846(88)90012-9 CrossRef

26.

Islam Laskar A, Talukdar S (2007) Rheological behavior of high performance concrete with mineral admixtures and their blending. Constr Build Mater 22:2345–2354. https://doi.org/10.1016/j.conbuildmat.2007.10.004 CrossRef

27.

Yoon JY, Kim JH (2018) Evaluation on the consumption and performance of polycarboxylates in cement-based materials. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2017.10.004

28.

Li G (2004) Properties of high-volume fly ash concrete incorporating nano-SiO 2. Cem Concr Res 34:1043–1049. https://doi.org/10.1016/j.cemconres.2003.11.013 CrossRef

29.

Mehta PK, Monteiro PJM (2013) Concrete: microstructure, properties, and materials. McGraw Hill Professional

30.

Siddique R (2004) Performance characteristics of high-volume Class F fly ash concrete. Cem Concr Res 34:487–493CrossRef

31.

Bogas JA, Gomes A (2013) Compressive behavior and failure modes of structural lightweight aggregate concrete—characterization and strength prediction. Mater Des 46:832–841. https://doi.org/10.1016/j.matdes.2012.11.004 CrossRef

32.

Zhang M-H, Gjørv OE (1992) Penetration of cement paste into lightweight aggregate. Cem Concr Res 22:47–55. https://doi.org/10.1016/0008-8846(92)90135-I CrossRef

33.

Bogas JA, Gomes A, Pereira MFC (2012) Self-compacting lightweight concrete produced with expanded clay aggregate. Constr Build Mater 35:1013–1022. https://doi.org/10.1016/j.conbuildmat.2012.04.111 CrossRef

34.

Guneyisi E, Gesoglu M, Booya E (2012) Fresh properties of self-compacting cold bonded fly ash lightweight aggregate concrete with different mineral admixtures. Mater Struct 45:1849–1859. https://doi.org/10.1617/s11527-012-9874-6 CrossRef

35.

Andrade LB, Rocha JC, Cheriaf M (2007) Evaluation of concrete incorporating bottom ash as a natural aggregates replacement. Waste Manag 27:1190–1199. https://doi.org/10.1016/J.WASMAN.2006.07.020 CrossRef

36.

Zhang M-H, Gjørv OE (1990) Microstructure of the interfacial zone between lightweight aggregate and cement paste. Cem Concr Res 20:610–618. https://doi.org/10.1016/0008-8846(90)90103-5 CrossRef

37.

Lo TY, Cui HZ (2004) Effect of porous lightweight aggregate on strength of concrete. Mater Lett 58:916–919. https://doi.org/10.1016/j.matlet.2003.07.036 CrossRef

38.

Yasar E, Atis CD, Kilic A, Gulsen H (2003) Strength properties of lightweight concrete made with basaltic pumice and fly ash. Mater Lett 57:2267–2270CrossRef

39.

Al-Jabri KS, Hago AW, Al-Nuaimi AS, Al-Saidy AH (2005) Concrete blocks for thermal insulation in hot climate. Cem Concr Res 35:1472–1479CrossRef

40.

Demirboga R, Orüng I, Gül R (2001) Effects of expanded perlite aggregate and mineral admixtures on the compressive strength of low-density concretes. Cem Concr Res 31:1627–1632CrossRef

41.

Elsharief A, Cohen MD, Olek J (2005) Influence of lightweight aggregate on the microstructure and durability of mortar. Cem Concr Res 35:1368–1376. https://doi.org/10.1016/j.cemconres.2004.07.011 CrossRef

42.

Lo Y, Gao X, Jeary A (1999) Microstructure of pre-wetted aggregate on lightweight concrete. Build Environ

Title: Use of raw-state bottom ash for aggregates in construction materials
Authors: Jin Young Yoon
Jun Young Lee
Jae Hong Kim
Publication date: 08-02-2019
Publisher: Springer Japan
Published in: Journal of Material Cycles and Waste Management / Issue 4/2019
Print ISSN: 1438-4957
Electronic ISSN: 1611-8227
DOI: https://doi.org/10.1007/s10163-019-00841-5

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 4/2019

Utilization of metalized plastic waste of food packaging articles in geopolymer concrete

Fuel characteristics of sewage sludge using thermal treatment

Eco-friendly polymers mortar for floor covering based on dredged sediments of the north of France

Field study of disaster waste management and disposal status of debris after Gorkha Earthquake in Kathmandu, Nepal

Assessment of energy parameters of biomass and biochars, leachability of heavy metals and phytotoxicity of their ashes

PVC concrete composites: comparative study with other polymer concrete in terms of mechanical, thermal and electrical properties