Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Strength of Materials
Published in: Strength of Materials 4/2020

09-11-2020

Wear Resistance Analysis of a Lightweight Aluminum Alloy Sheet Friction Stir Joint Area

Authors: H. F. Wang, D. W. Zuo, S. R. Liu, J. F. Pu, W. W. Song

Published in: Strength of Materials | Issue 4/2020

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The friction stir joining experiment was performed on a 6061-T6 aluminum alloy sheet 1 mm thick by optimization of different process parameters, and the microstructure and performance analysis of the joint area using a metallographic microscope, friction and wear testing machine, and scanning electron microscope were evaluated. The results show that the crystalline grains in the joint area of the specimen were refined under a given parameter, and the precipitation of the reinforcing phase improved the performance of the joint area. The best parameters for grain refinement were found to be a rotation speed of 8000 rpm and a traverse speed of 300 mm/min. The specimen obtained at 15,000 rpm and 200 mm/min exhibited the smallest milling weight loss. The smallest average friction coefficient of the specimen was observed at 8000 rpm and 300 mm/min. The friction weight loss trend of the specimens obtained under each parameter was basically the same as the friction coefficient. The wear form of each specimen was found to be mainly the adhesive wear, accompanied by the abrasive one.
previous article Analysis of the Thinning Mechanism of an Aluminum Alloy in Friction Stir Welding Based on the Indirect Extrusion–Vortex Flow Filling Model
next article Weldablity of the Lap Joint between a 5182 Aluminum Alloy and a DP1180 Two-Phase Steel Sheet

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Z. J. Tan, Q. Wu, and Z. Zhang, “Numerical simulation of tool wear in friction stir welding of different aluminum alloys,” Hot Working Tech., 46, No. 7, 206–209, 213 (2017).
2.
M. Movahedi, A. H. Kokabi, S. M. Seyed Reihani, and H. Najafi, “Effect of tool travel and rotation speeds on weld zone defects and joint strength of aluminium steel lap joints made by friction stir welding,” Sci. Technol. Weld Joi., 17, No. 2, 162–167 (2012).CrossRef
3.
X. H. Zeng, P. Xue, L. H. Wu, et al., “Microstructural evolution of aluminum alloy during friction stir welding under different tool rotation rates and cooling conditions,” J. Mater. Sci. Tech., 35, No. 6, 972–981 (2019).CrossRef
4.
P. Sahlot, A. K. Singh, V. J. Badheka, and A. Arora, “Friction stir welding of copper: numerical modeling and validation,” Trans. Indian Inst. Met., 72, No. 3, 1339–1347 (2019).CrossRef
5.
S. R. Yazdi, B. Beidokhti, and M. Haddad-Sabzevan, “Pinless tool for FSSW of AA 6061-T6 aluminum alloy,” J. Mater. Process. Technol., 267, No. 3, 44–51 (2019).CrossRef
6.
W. W. Song, X. J. Xu, S. R. Liu, et al., “Effect on the wear resistance of copper alloy surface modification layer by FSSP implanting W particles,” Mater. Trans., 60, No. 5, 765–769 (2019).CrossRef
7.
P. M. Miles, B. J. Decker, and T. W. Nelson, “Formability and strength of friction- stir-welded aluminum sheets,” Metall. Mater. Trans. A, 35, No. 11, 3461–3468 (2004).CrossRef
8.
M. Peel, A. Steuwer, M. Preuss, and P. J. Withers, “Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds,” Acta Mater., 51, No. 16, 4791–4801 (2003).CrossRef
9.
X. H. Wang, K. S. Wang, X. L. Su, and K. Hu, “Preparation technique on metallographic specimen of friction stir welds of dissimilar materials,” Light Met., 34, No. 7, 45–48, 52 (2006).
10.
K. S. Wang, X. H. Wang, X. L. Su, and K. W. Xu, “Research on friction and wear performances of joints by TIG and friction stir welding,” Rare Metal Mater. Eng., 36, No. 10, 1835–1838 (2007).
11.
X. H. Wang, K. S. Wang, Y. Shen, and K. W. Xu, “Friction and wear property near friction stir welds,” Hot Working Tech., 35, No. 11, 4–6 (2006).
12.
K. S. Wang, X. H. Wang, and K. W. Xu, “Research on friction and wear properties of joint by friction stir welding,” Lubr. Eng., 32, No. 2, 114–115, 158 (2007).
13.
H. F. Wang, D. W. Zuo, D. L. Shao, et al., “Effect of process parameters on residual stress and wear and corrosion resistance of 7022 aluminium alloy by FSW,” J. Aeronaut. Mater., 31, No. 1, 41–47 (2011).
14.
D. L. Shao, W. Z. Lu, D. W. Zuo, et al., “Finite element analysis of friction stir welding deformation of 7022 aluminum alloy,” Weld. Tech., 40, No. 1, 17–20 (2011).
Metadata
Title
Wear Resistance Analysis of a Lightweight Aluminum Alloy Sheet Friction Stir Joint Area
Authors
H. F. Wang
D. W. Zuo
S. R. Liu
J. F. Pu
W. W. Song
Publication date
09-11-2020
Publisher
Springer US
Published in
Strength of Materials / Issue 4/2020
Print ISSN: 0039-2316
Electronic ISSN: 1573-9325
DOI
https://doi.org/10.1007/s11223-020-00208-4

Other articles of this Issue 4/2020

Strength of Materials 4/2020 Go to the issue

OriginalPaper

Study on the Properties of High-Performance Ground Iron and Steel Slag Based on the Uniform Design

OriginalPaper

Effect of the Aluminum Matrix on Tensile Properties of Carbon Fiber/Al Composites Prepared by Liquid Extrusion Infiltration

OriginalPaper

2D Real Microstructure Simulation Method for Metal Materials

PRODUCTION SECTION

Fatigue Life Prediction for the Steel Passenger Car Wheel in the Dynamic Cornering Fatigue Test

OriginalPaper

Static and Dynamic Moduli of a Cold Recycled Emulsified Asphalt Mixture

OriginalPaper

Effect of Solid-Solution Second-Phase Particles on the Austenite Grain Growth Behavior in Nb-Ti High-Strength if Steel

Premium Partners

    Image Credits