2012 | OriginalPaper | Chapter
Wind turbines for electricity generation - basics
Authors : Prof. Dr.-Ing. Robert Gasch, Prof. Dr.-Ing. Jochen Twele
Published in: Wind Power Plants
Publisher: Springer Berlin Heidelberg
Activate our intelligent search to find suitable subject content or patents.
Select sections of text to find matching patents with Artificial Intelligence. powered by
Select sections of text to find additional relevant content using AI-assisted search. powered by
Presently wind turbines are used primarily for electrical power generation. Threephase alternators (AC generators) are used almost exclusively. Even for applications that require DC the lower-cost alternator/rectifier configuration has superceded the DC-generator. When a three-phase generator feeds directly into a grid, that operates at a fixed frequency (e.g. 50 Hz in Europe, 60 Hz in the U.S.A.) the angular velocity of the generator is fixed - or almost fixed. In this situation the power generation capability of the wind turbine will be fully utilized for just one value of wind speed (approximately 8 m/s in Fig. 11-1a). Thanks to the highly developed converter technology of today it is now possible to operate with variable generator speeds even for grid-connected generators (see Fig. 6-18). This yields better utilization of the wind turbine; during gusty winds it also substantially decreases the mechanical stresses in the blades and the shaft between turbine and generator.