Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Published in:
Introduction Read chapter Read first chapter

2024 | OriginalPaper | Chapter

5. Wood as Raw Material Source

Author : Vail Manfredi

Published in: Eucalyptus Kraft Pulp Refining

Publisher: Springer Nature Switzerland

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In this chapter, a brief history of the use of wood as a source of fiber is presented, in addition to considerations on the use of wood with special attention to eucalyptus woods and hardwoods, as these characteristics are important both in defining the quality of the pulps obtained from these woods and in the behavior and responses of the pulps during refinement.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
previous chapter The Modern Paper
next chapter The Fiber Cell Wall
Literature
47.
2.
17.
Kanazawa, T. and Fujita, O. K. – The latest refiner and deflaker designed with a twin rotor and stator system. Jappan Tappi Journal, 52 (4): 62–71 (1998).
21.
Baker, C. F. – Advances in the practicalities of refining. In: Refining and Mechanical Pulping conference. PIRA, Barcelona: 02-03/03/2005 Paper 2.
23.
Cotterill, P. and Macrae, S. – Improving eucalyptus pulp and paper quality using genetic selection and good organization. Tappi Journal, 80 (6):82-89 (1997).
24.
Raymond, C. A.; Banham, P. and MacDonald, A. C. – Whitin tree variation and genetic control of basic density, fibre length and coarseness in Eucalyptus regnans in Tasmania. Appita Journal, 51 (4): 299–305 (1998).
25.
Schmidt, E. A. – A practical model relating kraft pulping costs to hardwood chemical properties and morphology. Appita Journal, 58 (3): 218–224 (2005).
39.
Lindström, T. – Fundamentals of papermaking. In: 9th Fundamental Research Symposium. PIRA. Cambridge, 1989 pg. 311.
56.
Paavilainen, L. – Quality – competitiveness of Asian short-fibre raw materials in different paper grades. Papperi Ja Puu, 82 (3): 156 (1998).
57.
79.
Riki, J. T. B., Sotannde, O. A. and Oluwadare, A. O. – Anatomical and chemical properties of wood and their practical implictions in pulp and paper production – a review. Journal of Research in Forestry, Wildlife & Environment, 11 (3): 358–368 (2019).
80.
Tiikkaja, E.; Kauppinen, M. and Glorigiano, P. – Fibre dimensions, their effect on paper properties and required measuring accuracy. In: XXXI Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1998 pgs. 397–402.
81.
Kramer, J. D. – Pulping eucalyptus – a review. In: XXXI Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1998 pgs.: 615–632.
85.
Barrichelo, L. E. G. – Estudo das características físicas, anatômicas e químicas da madeira de Pinus caribeae Mor. Var. hondurensis Barr. Golf para a produção de celulose kraft. Tese de Livre Docência – ESALQ/USP (1979).
86.
Kärenlampi, P. – The effect of pulp fiber properties on the tearing work of paper. Tappi Journal, 79 (4): 211–216 (1996).
87.
Silva Jr., F. G. da; Valle, C. F. do e Muner, J. C. G. – Programa de qualidade da madeira da Votorantim Celulose e Papel – VCP. O Papel, 57 (1): 35–43 (1996).
88.
literature review. In: IV International Refining Conference. PIRA, Fiuggi, 1997 Paper 1 pgs. 5–43.
89.
Kärenlampi, P.; Retulainen, E. and Kolehmainen, H. – Properties of kraft pulps from different forest stands – theory and experiment. Nordic Pulp and Paper Research Journal, 9 (4):214–218 (1994).
90.
Retulainen, E.; Moss, P. and Nieminen, K. – Effect of fines on the properties of fibre networks. In: 10th Fundamental Research Symposium Proceedings. Mechanical Engineering Publications, London, 1993 Volume 2 pgs. 727–769.
91.
Seth, R. S. – The importance of fibre straightness for pulp strength. Pulp and Paper Canada, 107 (1): 34–42 (2006).
92.
Crotogino, R. H. – Machine calendering – recent advances in theory and practice. In: TECH95 Theory & Practice of Papermaking Course. CPPA, Ottawa, 1995 Section F1 13 pgs.
93.
Luce, J. – Paper structure. In: Wet-End Operations Short Course. TAPPI, Cincinnati, 1994 Paper 2 pgs. 9–23.
94.
Fonseca, S. M. da; Oliveira, R. C. de e Silveira, P. N. – Industrial tree selection: procedures, risks, costs and benefits. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRCTHF/IUFRO, Hobart, 1995 pgs. 15–19.
95.
Raymond, C. A. – Genetic control of wood and fibre traits in eucalypts. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRTHF/IUFRO, Hobart, 1995 pgs. 49–52.
96.
Piirainen, R. and Paavilainen, L. – Fiber length measurement in the pulp and paper industry. In: International Process and Materials Quality Evaluations Conference. TAPPI, Atlanta, 1986 pgs. 67–73.
100.
Hatton, J. V. – Kraft pulping of second-growth Jack pine. Tappi Journal, 76 (5): 105–113 (1993).
101.
Hatton, J. V. and Gee, W. Y. – Kraft pulping of second- growth lodgepole pine. Tappi Journal, 77 (6): 91–102 (1994).
102.
Philipp, P. and D’Almeida, M. L. O. – Celulose e papel – tecnologia de fabricação de papel – Volume 2. SENAI/IPT, São Paulo, 1988 402 pgs.
103.
Pinheiro, A. L. – Considerações sobre a taxonomia, filogenia, ecologia, genética, melhoramento florestal e a fertilização mineral e seus reflexos na anatomia e qualidade da nadeira. SIF, Viçosa, 1999 144 pgs.
308.
Paavilainen, L. – Effect of sulphate cooking parameters on the papermaking potential of pulp fibres. Paperi ja Puu, 71 (4): 356–363 (1989).
341.
Kibblewhite, R. P. – Qualities of kraft and thermomechanical radiata pine papermaking fibres. In: 8th Fundamental Research symposium. BP&BMA, Oxford, 1985 Volume 1 pgs. 93–131.
342.
Shaw, M. J.; Clarke, C. R.; Pallett, R. N. and Morris, A. R. – Differentiating timber to optimize the pulping process. Appita Journal, 51 (6): 456–460 (1998).
343.
Scott, W. E. – Principles of wet end chemistry. Tappi Press, Atlanta, 1996 185 pgs.
344.
Sandercock, C. F.; Sands, R.; Ridoutt, B. G.; Wilson, L. F. and Hudson, I. – Factors determining wood microstructure in eucalyptus. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRCTHF/IUFRO, Hobart, 1995 pgs. 12–-135.
345.
Trugilho, P. F.; Bianchi, M. L.; Rosado, S. C. da S. and Lima, J. T. – Qualidade da madeira de clones de espécies e híbridos naturais de Eucalyptus. Scientia Forestalis, 73: 55–62 (2007)
588.
Eklund, D. and Lindström, T. – Paper chemistry – An introduction. DT Paper Science Publications, Grankulla, Finland, 1991 305 pgs.
798.
Springer, A.; Nabors, L. A. and Bhatia, O. – The influence of fiber, sheet structual properties and chemical additives on wet pressing. Tappi Journal, 74 (4):221 (1991).
31.
Valente, C. A.; de Sousa, A. P. M. de; Furtado, F. P. and Carvalho, A. P. – Improvement program for Eucalyptus globulus at Portucel: technological component. Appita Journal, 45 (6): 403–407 (1992).
99.
Hatton, J. V. and Cook, J. – Kraft pulps from second-growth Douglas Fir: relationships between wood, fiber, pulp, and handsheet properties. Tappi Journal, 75 (1): 137–144 (1992).
347.
Mokfiensk, A.; Gomide, J.L.; Colodette, J. L. and Oliveira, R.C. de – Importância da densidade e do teor de carboidratos totais na madeira de eucalipto no desempenho da linha de fibras. In Colóquio Internacional sobre Celulose Kraft de Eucalipto, UFV, Viçosa, 2003 pgs. 15–38.
348.
Silva, R. P. and Oliveira, R. C. de – A reciclagem de papéis: uma aboradagem técnica. Folha Florestal (93): 9–11 (1999).
349.
Barrichelo, L. E. G. – Densidade básica e características das fibras de madeira de E. grandis. In: III Congresso Latino-Americano de Celulose e Papel. ABTCP, São Paulo, 1983 pgs 113–125.
350.
Faust, T. D.; Clark III, A.; Courchene, C. E.; Shiver, B. D. and Beli, M. L. – Effect of intensive forest management practices on wood properties and pulp yield of young, fast growing Southern pine. In: International Environment Conference. TAPPI, Nashiville, 1999 Volume 2 pgs. 501–512.
397.
Rudie, A. W. – Wood and how it relates with wood products. Tappi Journal, 81 (5): 223–228 (1998).
352.
Greaves, B. L. and Borralho, M. G. – The influence of basic density and pulp yield on the cost of eucalypt kraft pulping: a theoretical model for tree breeding. Appita, 49 (2): 90–95 (1996).
355.
Maloney, T. C. and Paulapuro, H. – The formation of pores in the cell wall. Journal of Pulp and Paper Science, 25 (12): 430–436 (1999).
468.
Higgins, H. G.; Young, J. de; Balodis, V.; Phillips, F. H. and Colley, J. – The density and structure of hardwoods in relation to paper surface characteristics and other properties. In: Process Engineering Handbook. Ed. Process Engineering Committee of the Engineering Division. Tappi Press, Atlanta, 1992, 2nd Edition Appendix: 77–81.
555.
Dowens, G. M. – Wood properties of interest in plantation productivity. In: Sampling Plantation Eucalyptus for Wood and Fibres Properties. Chapter 1. Ed. Dewens, G. M. et al CSIRO Publishing, Collingwood, 1997 pgs. 1–8.
650.
50.
Xiang, Y.; Bousfield, D. W.; Hassler, J.; Coleman, P. and Osgood, A. – Measurement of local variation of ink tack dynamics. Journal of Pulp and Paper Science, 25 (9): 326–330 (1999).
215.
Stratton, R. A. – Characterization of fibre-fibre bond strength from out-of-plane paper mechanical properties. Journal of Pulp and Paper Science, 19 (1): 7–12 (1993).
464.
Franklin, E. C. – Selection strategies for eucalypt tree improvement – four generations of selection in Eucalyptus grandis demonstrate valuable methodology. In: Breeding Tropical Trees: Population Structure and Genetic Improvement Strategies in Clonal and Seedling Forestry. Ed. Gibson, G. L.; Griffin, A. R. and Matheson A. C. IUFRO, Pattaya, 1988 pgs. 197–209.
609.
Boland, D. J.; Brooker, M. I. H.; Chippendale, G. M.; Hall, N.; Hyland, B. P. M.; Johnston, R. E.; Kleining, D. A. and Turner, J. D. – Trees of Australia. Nelson/CSIRO, Melbourne, 1984.
385.
Ilvessalo-Pfäffli, M. –S. – Fiber Atlas – Identification of Papermaking Fibres. Spring Series in Wood Science, Series Ed. Timell, T. E. Spring-Verlag, Berlin, 1995. 400 pgs.
755.
Brown, A. G. and Hills, W. E. – General introduction. In: Eucalyptus for Wood Production. Ed. Hillis, W. E. and Brown, A. G., CSIRO/Academic Press, London, 1984 Chapter 1 pg 3–5.
22.
Bugajer, S.; Silva, O. F. and Pires, F. – Influência do pH na refinação de pastas celulósicas. In: 17° Congresso Anual da ABCP. São Paulo. 1984 pgs. 31–39.
20.
Cotterill, P. P. and Brolin, A. – Improving Eucalytpus wood, pulp and paper quality by genetic selection. In: Conference on Silviculture and Improvement of Eucalypts. IUFRO, Salvador: 24-29/08/1997 Volume 1 pgs. 1–13.
52.
Foelkel, C. E. B. and Dalmolin, I. – Improving eucalyptus pulp refining through the control of pulp consistency and stock pH: comparisons at given bulk and given tensile strength. In: Papermakers Conference, TAPPI, Atlanta: 01-04/03/1999 Volume 2 pgs: 751–754
58.
Kibblewhite, R. P.; Bawden, A. D. and Hughes, M. C. – Hardwood market kraft fibre and pulp qualities. Appita, 44 (5): 325–332 (1991).
68.
Sigl, R. – Low intensity refining of hardwood and deinked pulps with a new generation of filling. Twogether – Paper Technology Journal (8): 7–11 (1999).
82.
Demler, C. L. and Pitz, M. – Comparison of conventionally, ECF and TCF bleached hardwood pulp refining response. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 9 8 pgs.
107.
Miranda, I.; Almeida M. H. and Pereira, H. – Variation of fibre biometry in different provenances of eucalyptus globulus Labill. Appita Journal, 54 (3): 272 (2001).
115.
121.
Zhang, C.; Chen, M.; Keten, S.; Coasne, B.; Derome, D. and Carmeliet, J. – Hygromechanical mechanisms of wood cell wall revealed by molecular modeling and mixture rule analysis. Materials Science, 7 (37): eab8919 (2021).
165.
Gurnagul, N., Page, D. H. and Seth, R. S. – Dry sheet properties of Canadian hardwood kraft pulps. Journal of Pulp and Paper Science, 16 (1): 36–41 (1990).
184.
Kibblewhite, R. P. and McKenzie, C. J. – Kraft fibre property variation among 29 trees of 15 year old Eucalyptus fastigata and comparison with E. nitens. Appita Journal, 52 (3): 218–225 (1999).
202.
Dean, G. H. – Objectives for wood fibre quality and uniformity. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRCTHF/IUFRO, Hobart: 19-24/02/1995 pgs. 5–9.
209.
Kibblewhite, R. P. – Reinforcement and optical properties of separate and co-refined softwood and eucalypt market kraft pulps. Appita Journal, 47 (2): 149–153, 158 (1994).
217.
Demuner, B. J.; Manfredi, V. and Claudio-da-Silva Jr., E. – O refino da celulose de eucalipto – uma análise fundamental. O Papel, 52 (8): 44 – 54 (1990).
295.
Kibblewhite, R. P. – The qualities of radiata pine papermaking fibres. Appita, 35 (4): 289–298 (1982).
320.
Shallhorn, P. M. and Heintze, H. U. – Hardwood vessel picking in the offset printing of uncoated fine papers. Pulp & Paper Canada, 98 (10): 21–24 (1997)
333.
Moore, G. K. and Jopson, R. N. – The onward march of eucalyptus. Paper 360°, September): 14–15 (2008).
379.
Miranda, I.; Gominho, J.; Lourenço, A. and Pereira, H. – Heartwood, extractives and pulp yield of three Eucalyptus globulus clones grown in two sites. Appita Journal, 60 (6): 485–488, 500 (2007).
388.
Brindley, C. L. and Klimbewhite, R. P. – Refining effects on eucalyptus and mixed hardwood and softwood market pulps and blends. In: 48th Annual General Conference. APPITA, Melbourne, 1994 Paper 3B41 pgs. 493–500.
389.
Beck, M. V. – The importance of wet end equipment and its influence on retention. In: Retention of Fines and Fillers During Papermaking. Gess, J. M. Ed. Tappi Press, Atlanta, 1998, Chapter 7 pgs. 129–158.
390.
Garlet, V. N.; Andreotti, V. and Sacon, V. – Misturas de fibras curtas e longas: influência da fibra de eucalipto nas propriedades. In: XXIV Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1991. pgs. 37–43.
391.
Demuner, B. J. – Opportunities for market pulp differentiation via fractionation. In: 5th International Paper and Board Industry Conference. PIRA, Vienna, 1999 pg 4–18.
392.
Gigac, J.; Kuña, V. and Schwrtz, J. – Effects of fibers and fillers on the optical and mechanical characteristics of paper. Tappi Journal, 78 (2): 162–167 (1995).
393.
Baker, C. F. – Good practice for refining the types of fiber found in modern paper furnishes. Tappi Journal, 78 (2): 147–157 (1995).
394.
Koran, Z. – Different process can be used to enhance hardwood pulping quality. Pulp and Paper Canada, 90 (2): 20–21 (1989).
395.
Levlin, J. E. – Different hardwood pulps in papermaking. Paper, 9 (206): 218 (1986).
396.
Demuner, B. J.; Viana Doria, E. L.; Claudio-da-Silva Jr., E. and Manfredi, V. – The influence of eucalypt fiber characteristics on pulp and paper properties. In: International Paper Physics Conference. TAPPI, Kona, 1991 Book 1 pgs.185–196.
398.
Sepke, P.W., Metzer, F.P. and Selder, H. – Refining of acacia. In: Scientific and Technical Advances in Refining & Mechanical Pulping – Course Notes. PIRA, Stockholm, 2003 Paper 7.
399.
Busker, L. H. and Cronin, D. C. – The relative importance of wet press variables in water removal. Pulp and Paper Canada, 85 (6): 138–147 (1984).
400.
El-Sharkawy, K.; Koskenhely, K. and Paulapuro, H. – The fractionation and refining of eucalyptus kraft pulps. Nordic Pulp and Paper Research Journal, 23 (2): 172–180 (2008).
401.
Kimmo, H.; Markku, P. and Håkan, S. – New trends and technology in refining. IPPTA Journal, 24 (1): 109–113 (2012).
402.
Baker, C. F. – Refining review – changes in refining practice with new sources of fibre. World Pulp and Paper Technology: 95–97, 99 (1992).
403.
Lavezzo, E. F.; Dueñas, R. S.; Saucedo, J. T.; Prado, M. C. J. and Becerra, M. C. B. – Evaluacion de eucalyptus procedentes de palantaciones técnicas para la produccion de pulpa e papelera. El Papel, (71):40–42 (1998).
411.
Shapiro, S. – Formation and fiber orientation sensors for web quality optimization. In: Papermakers Conference. TAPPI, Philadelphia: 24-27/03/1996 pg. 17.
4.
32.
Lammi, L. and Svedman, M. – Tailoring pulp quality in the pulping process. In 2o Seminário de Deslignificação. ABTCP, Ribeirão Preto: 02-03/09/1999 Paper 2 8 pgs.
319.
Higgins, H. G. – Pulp and paper. In: Eucalyptus for wood production. Ed. Hillis, W. E. and Brown, A. G., CSIRO/Academic Press. London Capitulo 13 pg 290–316.
357.
Hillis, W. E. – Wood quality and utilization. In: Eucalyptus for Wood Production. Ed. Hillis, W. E. and Brown, A. G., CSIRO/Academic Press, London. Chapter 12 pg 259–289 (1984).
404.
Silva Jr, F. da; Gomes, I. M. de B.; Barrichelo, L. E. G. and Oda, S. – Avaliação da qualidade da madeira de híbridos de Eucalyptus grandis x Eucalyptus camaldulensis visandoa produção de celulose. In: VII Congresso Florestal Brasileiro. SBS/SBEF, Curitiba, 1993 Volume 2 pgs.581–585.
407.
Colodette, J. L.; Gomes, C. M.; Rabelo, M. S.; Eiras, K. M. M.; Gomes, A. de F. and Oliveira, K. D. – Eucalyptus Kraft pulp bleaching: state-of-art and new developments. Tappi Journal, 7 (2): 18A-18M (2008).
465.
Mascarenhas, A. F. and Muralidharan, E. M. – Clonal forestry with tropical hardwoods. In: Clonal Forestry II – Conservation and Application. Ed. Ahuja, M. R. and Libby, W. J. Springer-Verlag, Berlin, 1993 Chapter 10: 167–187.
49.
Magaton, A. S.; Colodette, J. L.; Gouvea, A. F. G.; Gomide, J. L.; Muguet, M. C. S. and Pedrazzin, C. – Eucalyptus wood quality and its impact on kraft pulp production and use. Tappi Journal, 8 (8): 32–39 (2009).
60.
Ferahi, M.; Kortschot, M. T. and Dodson, C. T. J. – Effect of anisotropy on the fracture behaviour of newsprint. Journal of Pulp and Paper Science, 22 (11): 430–446 (1996).
328.
Blomstedt, M.; Panula-Ontto, S.; Kontturi, E. and Vuorinen, T. – Um método para reduzir o arrancamento de valos de folhas de polpa de eucalipto mediante modificação com carboximetilcelulose. O Papel, 69 (2): 35–44 (2008).
351.
Amidon, T. E. – Effect of the wood properties of hardwoods on kraft paper properities. Tappi Journal, 64 (3): 123–126 (1981).
405.
Sidaway, S. – The availability and use of eucalyptus pulps. Tappi Journal, 71 (12): 47–51 (1988).
406.
408.
Morud, B. – Papermaking properties of hardwood pulps. Norsk Skogindustri, 26 (2): 30–32 (1972).
409.
Lundqvist, S-O. – Efficient wood and fiber characterization – a key factor in research and operation. Annals of Forest Science, 59: 491–501 (2002).)
410.
Demuner, B. J., Ratnieks, E. and Robinson, D. – Ultra low intensity refining of eucalyptus pulps. In: Refining and Mechanical Pulping Conference. PIRA, Barcelona, 2005 Paper 7.
868.
Demuner, B. J.; Viana Doria, E. L.; Claudio-da-Silva Jr., E. and Manfredi, V. – Influência das características dos flocos sobre o refino de polpas químicas. O Papel, 54 (2): 29–39 (1993).
9.
Atchinson, J. E. and McGovern, J. N. – History of paper and the importance of non-wood plant fibers. In: Pulp and Paper Manufacture – Volume 1 – Properties of Fibrous Raw Materials and Their Preparation fo Pulping. Ed.Kocureck, M. J. and Stevens, C. F. B. The Technical Committee of the Paper Industry, Atlanta/Montreal, 1983 pg. 154–156.
34.
Hubbe. M. A – Flocculation and redispersion of cellulosic fiber suspensions: a review of effects of hydrodiynamic shear and polyeledtolytes. BioResources, 2 (2): 296–331 (2002).
456.
Gharehkhani, S.; Sadeghinezhada, E.; Kazi, S. N.; Yarmanda, H.; Badarudina, A.; Safaei, M. R. and Zubir, M. N. M. – Effect of pulp consistency during refining of pulp refining on fiber properties—A review. Carbohydrate Polymers Journal, 115: 785–803 (2015).
427.
Fengel, D. and Wegener, G. – Wood chemistry, ultrastructure, reactions. De Gruyter, Berlin, 1983
462.
27.
Sorieul, M.; Dickson, A.; Hill, S. J. and Pearson, H. – Plant fibre: molecular structure and biomechanical properties, of a complex living material, influencing Its deconstruction towards a biobased composite. Materials, 9 (618): 1–36; (2016).
461.
Gorshkova, T.; Brutch, N.; Chabbert, B.; Deyholos, M.; Hayashi, T.; Lev-Yadun, S.; Mellerowicz, E. J.; Morvan, C.; Neutelings, G. and Pilate, G. – Plant fiber formation: state of the art, recent and expected progress, and open questions. Critical Reviews in Plant Sciences, 31: 201–228 (2012).
33.
Coradin, V. T. R. and Camargos, A. A. – A estrutura anatômica da madeira e princípios para sua identificação. IBAMA, Laboratório de Produtos Florestais. Brasília, 2002 28 pgs.
454.
Sjöström, E. – Production of microfibrillated cellulose by LC-refining. Master’s Thesis, Abo Akademi, 2018 77 pgs www.doria.fi/bitstream/handle/10024/165125/sjostrom_erik.pdf?sequence=2&isAllowed=y
460.
457.
Burger, L. M. and Richter, H. G. – Anatomia da madeira. Editora Nobel, São Paulo, 1991 154 pgs.
413.
Salmén, L. – Micromechanical understanding of the cell-wall structure (Micromécanique de la structure de la paroi cellulaire) Comptes Rendus Biologies, 327 (9–10): 873–880 (2014).
425.
Chen, F. and Evans, R. – A robust approach for vessel identification and quantification in eucalypt pulpwoods. Appita Journal, 58 (6): 442–447 (2005).
242.
436.
331.
Parham, R. A. – Wood structures – hardwood. In: Pulp and Paper manufacture – Volume I – Properties of Fibrous Raw Materials and their Preparation for Pulping. E.: Kocurek, M. J. and Stevens, C. F. B. The Joint Textbook Committee of the Paper Industry, Atlanta/Montreal, 1983, 28–34.
415.
Sands, P. J. – Speculations on modeling eucalypt pulp-wood quality. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRCTHF/IUFRO, Hobart, 1995 pgs. 136–139.
1408.
316.
Byrd, V. L. and Fahey, D. J. –How to reduce vessel element picking in printing papers containing Oak. Paper Trade Journal, 153 (47): 54–59 (1969).
318.
Singh, S. V. and Rai, A. K. – Suface property inter-relationship in wood-free paper. IPPTA, 5 (4): 9–15 (1993).
325.
Corson, S.R. – Process impacts on mechanical pulp fibre and sheet dimensions. Pulp and Paper Canada, 103 (2): 20–27 (2002).
330.
Karlsson, H. – New technique for measurement of fibre properties including vessel cells and mix of fibre species. Appita Journal, 61 (3): 192–196 (2008).
414.
Koran, Z. – Fiber characteristics. In: TECH95 Theory & Practice of Papermaking Course. CPPA, Ottawa, 1995 Section A1 8 pgs.
416.
Lindström, N. and Fardim, P. – Chemistry and surface chemistry of vessels in eucalyptus kraft pulps. O Papel, 73 (9): 65–72 (2012).
417.
84.
Malan, F. S.; Male, J. R. and Venter, J. S. M. – Relationship between the properties of eucalyptus wood and some chemical, pulp and paper properties. Paper Southern Africa, 14 (1): 6–16 (1994).
317.
Kartusch, B. – Einfluss des kambiumalters auf verteilung unf grosse der gefassflachen im buchenholz. Holzforsch. Holzverwert, 46 (4): 58, 66–9 (1994).
329.
Alves, E. F.; Oliveira, R. C. de; Silva, L. H. M. da e Colodette, J. L. – Interação de fibras e elementos de vasos de polpa Kraft de eucalipto com tintas de impressão offset. In: XXXIX Congresso Anual. ABTCP. São Paulo, 2006 18 pgs.
332.
Tateishi, M.; Seino, T.; Ona, T.; Oshima, J.; Adachi, K.; Yokota, S. and Yoshizawa, N. – Rapid assessment of vessel anatomical features by pyrolysis-gas chromatography. In: Eucalyptus in a Changing World Conference. IUFRO, Aveiro, 2004 2 pgs.
358.
Taylor, F. W. – Variation in the anatomical properties of South African grown Eucalyptus grandis. Appita Journal, 27 (3): 171–184 (1973).
418.
Wilson, L.; Hudson, I. and VanBeveren, K. – Vessel distribution at two percentage heights from pith to bark in a seven year old Eucalyptus globulus tree. Appita Journal, 50 (6): 495–500 (1997).
419.
Dadswell, H. E. – The anatomy of eucalypt woods. CSIRO Division of Applied Chemistry Technological Paper (66), 1972, 3 pgs.
420.
Willians, M. D. – Chemimechanical pulps from plantation eucalypts. Appita, 46 (2): 137–142 (1994).
421.
Malan, F. S. – Genetic variation in some growth and wood properties among 18 fullsib familes of South African grown Eucalyptus grandis: a preliminary investigation. South African Forestry Journal (146): 38 (1988).
422.
Marcoccia, B. S. – The theoretical background to Lo-SolidsTM pulping. In: 82nd Annual Technical Meeting. CPPA, Montreal, 1996 pgs. 265–274.
423.
Core, H. A.; Cote, W. A. and Day, A. C. – Wood structure and identification. Syracuse University Press, 2nd Edition, 1979.
424.
Rakkolainen, M.; Kontturi, E.; Isogai, E.; Enomae, T.; Blomstedt, M.; Vuorinen, T. – Carboxymethyl cellulose treatment as a method to inhibit vessel picking tendency in printing of eucalyptus pulp sheets. Industrial and. Engineering Chemistry Research, 48 (4): 1887–1892 (2009).
41.
Arjas, A. – Printability and runnability. World Pulp and Paper Technology: 157–158. (1994).
42.
Annergren, G. – Fundamentals of pulp fiber quality and paper properties. In: Pulping Conference. TAPPI, Orlando. 1999 pgs: 29–39
321.
Frazão, F. J. L. – Características da madeira e da polpa kraft não branqueada de Eucalyptus deglupta Blume introduzido na região de Manaus-AM. In: Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1986 pgs. 79–87.
322.
Colley, J. – Factors affecting the vessel picking tendency of hardwood pulps. Appita, 28 (6): 392–398 (1975).
323.
Queiroz, S. C. S. and Gomide, J. L. – Efeito das características anatômicas e químicas na densidade básica da madeira de clones híbridos de Eucalyptus grandis x Eucalyptus urophylla. O Papel, 63 (6): 79–84 (2003).
324.
Josefsson, A. – Ultrasonic refining of chemical pulp fibres. Master’s Thesis. Chalmers University of Technology, Göteborg, 2010 48 pgs
326.
Gopichand, K.; Maheshwari, S. – Vessel picking of printing papers – a problem in need of greater attention. IPPTA, 2 (1): 19–24 (1990).
327.
Chinga, G. and Syverud, K. – On structual properties affecting the picking tendency of newsprints. Nordic Pulp and Paper Research Journal, 22 (4): 447–451 (2007).
334.
Colley, J. – The influence of vessel elements on the picking tendency of eucalypt pulps. Paper Technology, 14: 293–296 (1973).
335.
Carvalho, H. G. de; Oliveira, R. C. de; Gomide, J. L. and Colodette, J. L. – Efeito da idade de corte da madeira e de variáveis de refino nas propriedades da celulose kraft branqueada de eucalipto. In: XXXI Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1998 pg. 367–381.
336.
Richardson, J. D.; Wong, K. K. Y. and Clarck, T. A. – Modification of mechanical pulp using carbohydrate-degrading enzymes. Journal of Pulp and Paper Science, 24 (4): 125–128 (1998).
40.
Clarke, C. R. E.; Shaw, M. J. P.; Wessels, A. M. and Jones, W. R. – Effect of differences in climate on growth, wood, and pulp properties of nine eucalypt species at two sites. Tappi Journal, 82 (7): 89–99 (1999).
426.
Ververis, C.; Georghiou, K.; Christodoulakis, N.; Santas, P. and Santas, R. – Fiber dimensions, lignin and cellulose content of various plant materials and their suitability for paper production. Industrial Crops and Products, 19: 245–254 (2004).
435.
Gratzl, J. S. – Delignification and bleaching principles. In: Emerging Pulping & Bleaching Technologies Workshop. TAPPI, Durhan, 1995 – section Pulping and Delignification II.
428.
Pydimalla, M. and Reddy, K. – Effect of pulping, bleaching and refining process on fibers for paper making – A review. International Journal of Engineering Research & Technology, 9 (12): 310–316 (2020).
429.
Stark, H. – Pulp properties of TCF pulps. In: Emerging Pulping & Bleaching Technologies Workshop. TAPPI, Durhan, 1995 Section Bleaching III.
430.
Stone, J. E. and Scallan, A. M. – A structural model for the cell wall of water swollen sood pulp fibres based on their accessibility to macromolecules. Cellulose Chemistry Technology (2): 343–358 (1968).
431.
Smith, T. J.; Wearne, R. H. and Wallis, F. A. – Factors influencing the amount of chlorinated phenols formed during bleaching of eucalypty kraft pulps. Holzforchung (48): 125–132 (1994).
432.
Ruel, K.; Billosta, V. C.; Guillemin, F.; Sierra, J. B. and Joseleau, J-P. – The wood cell wall at the ultrastructural scale – formation and topochemical organization. Maderas. Ciencia y tecnología. 8(2):107–116 (2006).
433.
434.
Fahlén, J. – The cell wall ultrastructure of wood fibres – effects of the chemical pulp fibre line. KTH Royal Institute of Technology, Stockholm, 2005 70 pgs. www.diva-portal.orgsmashgetdiva27109FULLTEXT01.pdf
199.
Castanho, C. G. and Oliveira, R. C. de – Recuperação e avaliação do rejeito fibroso industrial da polpação kraft de eucalipto para produção de papel. In: III Seminário de Tecnologia Papeleira. ABTCP, São Paulo: 2000 pgs. 96–106.
437.
Josephson, W.; Jansson, U.; Sezgi, U. S. and Fagerströn, K. – Low consistency refining of a non-conventionally cooked pulp. In: Papermakers Conference. TAPPI, Atlanta, 1999 Book 2 pgs. 729–739.
438.
Borralho, N. M. G.; Cotterill, P. P. and Kanowski, P. J. – Breeding objectives for pulp production of Eucalyptus globulus under different industrial cost structures. Canadian Journal of Forest Research, 23: 649 (1993).
439.
Ferreira, C. R.; Fantini Jr, M.; Colodette, J. L.; Gomide, J. L. and Carvalho, A. M. M. L. – Avaliação tecnológica de clones de eucalipto. Parte 1: qualidade da madeira para produção de celulose kraft. Scientia Forestalis (70): 161–170 (2006).
528.
Zhang, X.; Li, L. and Xu, F – Chemical Characteristics of Wood Cell Wall with an Emphasis on Ultrastructure: A Mini-Review. Forests, 13 (3): 439–461 2022)
7.
Whitney, R. P. – The dtory of paper. Tappi Press, Atlanta, 1984, 28 pgs.
842.
Koch, G – Raw material for pulp. In: Handbook of Pulp. Volume 1, Chapter 2, Ed. Sixta, H. WILEY-VCH Verlag GmbH &Co. KGaA, Weinheim, 2006 pgs. 28–68.
38.
442.
Park, S. W. and Pinto, J. M. – Cinética da polpação kraft. Parte 1: a evolução de modelos empíricos para modelos mecanísticos. In: XXIII Congresso Anual de Celulose e Papel, ABTCP, São Paulo, 1990 pgs. 69–91.
444.
Sjöström, E. – Wood chemistry – fundamentals and applications, 2nd. Edition. Academic Press, San Diego, 1993 pg. 204–222.
452.
Smook, G. A. – Preparation of papermaking stock In: Handbook of Pulp and Paper Thechnologists – Chapter 13. Angus Wilde, 2002. pgs 190–204
453.
Abdul Khalil, H. P. S.; Davoudpour, Y.; Nazrul Islama, Md; Mustaphaa, A.; K. Sudeshd, Rudi Dungani, R. and Jawaidb, M. – Production and modification of nanofibrillated cellulose using various mechanical processes: A review. Carbohydrate Polymers 99: 649–665 (2014)
736.
450.
451.
Zhang, M.; Hubbe, M. A.; Venditti, R. A. and Heitamann, J. A. – Can recycled kraft benefit from chemical addition before they are first dried? Appita Journal, 55 (2): 135–144.
455.
Winandy, J. E. and Rowell, R. M. – Chemistry of wood strength. In: Handbook of wood chemistry and wood. Chapter 11. CRC Press, Boca Raton, 2005 Ed. Rowell, R. M. – pgs. 303–347.
445.
Milichovsky, M. – A new concept of chemistry refining process. Tappi Journal, 62 (10): 221–231 (1990).
484.
Clark, J. d’Á. – Some troughts on fiber classification and length. In: Process Engineering Handbook. Ed. Process Engineering Committee of the Engineering Division. Tappi Press, Atlanta, 1992, 2nd Edition Appendix: 74–76.
485.
Xie, Y. Q.; Tong, Q. J. and Chen, Y. – Manufacture and properties of a novel ultra-low-density fiberboard from wood fibre. BioResources, 6 (4): 4055–4066 (2011).
440.
Lennholm, H. and Iversen, T. – The effects of laboratory beating on cellulose structure. Nordic Pulp and Paper Research Journal, 10 (2): 104–109 (1995).
412.
Yuan, L.; Wan, J.; Ma, Y.; Wang, Y.; Huang, M. and Chen, Y. – The content of different hydrogen bond models and crystal structure of eucalypty fibers during beating. BioResources 8 (1), 717–734 (2013).
446.
Homas, L. H.; Kennedye, C. J.; Mayb, R. P.; Altanerf, C. M.; Apperleyg, D. C.; Wessh, T.J. and Jarvisi, M. C. – Structure of cellulose microfibrils in primary cell walls from collenchyma. Plant Physiology, 161 (1): 465–476 (2013).
447.
Genco, I.; Boufi, S.; Pèlach, M. A.; Alcalà, M.; Vilaseca, F. and Mutjéa, P. – Nanofibrillated cellulose as paper additive in eucalyptus pulps. BioResources, 7 (4): 5167–5180 (2012).
448.
Chinga-Carrasco, G. – Cellulose fibres, nanofibrils and microfibrils: The morphological sequence of MFC components from a plant physiology and fibre technology point of view. Nanoscale Research Letter,. 6 7 pgs. (2011).
37.
Fahlén J, Salmén L. – Cross-sectional structure of the secondary wall of wood fibers as affected by processing. In: 11th International Symposium on Wood and Pulping Chemistry. Nice, 2001 pg. 585.
449.
Donaldson, L. – Cellulose microfibril aggregates and their size variation with cell wall type. Wood Science and Technology, (41): 443–460 (2007).
572.
Leask, R. A. – Introduction. In: Pulp and Paper Manufacture, Volume 2, Mechanical Pulping. R. A. Leask, Ed. Joint-Textbook Committee, Technical Section. CPPA/TAPPI.
441.
Salmén, L. – Wood morphology and properties from molecular perspectives. Annals of Forest Science, (72):679–684 (2015).
443.
Scallan, A. M. and Tigerström, A. C. – Swelling and elasticity of the cell walls of pulp fibres. Jornal of Pulp and Paper Science, 18 (5): 188–193 (1992).
1213.
Mohlin, U.-B. and Wennberg, K. – Some aspects of the interaction between mechanical and chemical pulps. Tappi Journal, 67 (1): 90–93 (1984).
13.
Haunreiter, K. J. – 200th Anniversary of the paper machine – the first 100 years. Tappi Journal, 80 (10): 87–96 (1997).
487.
Page, D.H. – A note on the cell-wall structure of softwood tracheids. Wood and Fiber, 7: 246–248 (1976).
1406.
133.
Waterhouse, J. – Formation measurements and paper quality. World Pulp and Paper Technology, (9): 107 (1998).
488.
Salmén, N. L. and Olsson, A-M. – Interaction between hemicelluloses, lignin and cellulose: structure-property relationships. Journal of Pulp and Paper Science, 24 (3): 99–103 (1998).
575.
214.
Santos, A.; Anjos, O. M. and Simões, R. M. S. – Influence of kraft cooking conditions on the pulp quality of Eucalyptus globulus. Appita Journal, 61 (2): 148–155 (2008).
489.
Gomide, J. L.;Colodette, J. L.; Oliveira, R. C. de; Girard, R. and Argyropoulos, D. S. – Fatores que afetam a branqueabilidade de polpas kraft de eucalyptus. Parte 2: Influência de parâmetros da Polpação. O Papel, 60 (12): 61–70 (2000).
490.
Gomide, J. L. and Almeida, J. M. – Carbohydrate and lignin degradation during continuous kraft pulping of Eucalyptus wood. In: Sixt Brazilian Symposium on the Chemistry of Lignins and Other Wood Components. FAENQUIL, Guaratinguetá, 1999 pgs. 45–51.
491.
Al-Dajani, W. W. and Tschirner, U. W. – Pre-extraction of hemicelluloses and subsequent kraft pulping. Part I: alkaline extraction. Tappi Journal, 7 (6): 3–8 (2008).
113.
Ratnieks, E. and Foelkel, C. E. B. – Uma discussão teórioco-prática sobre polpas de eucalipto para a fabricação de papel “tissue”. In: XXIX Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1996 pgs. 717–734.
126.
Page, D. H. – A theory for tensile strength of paper. Tappi, 52 (4): 674–681 (1969).
474.
Snowman, V. R.; Genco, J. M.; Cole, B. J. W.; Kwon, H. B. and Miller, W. J. – Bond strength of oxygen-delignified kraft pulps. Tappi Journal, 82 (2): 103–109 (1999).
493.
Demuner, B. J. Viana Doria, E. L.; Claudio-da-Silva Jr., E. and Manfredi, V. – As propriedades do papel e as características das fibras de eucalipto. In: XXIV Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1991 pgs. 621–641.
494.
Cao, B.; Tschirner, U. and Ramaswamy, S. – Impact of pulp chemical composition on recycling. Tappi Journal, 81 (12): 119–127 (1998).
495.
Hanna, K. R., Fisher, J. J.; Krotm, M. J.; Goyal, G. C.; Packwood, R. E. and Ragauskas, A. J – Differences in bleaching and refining responses of displacement batch hardwood and softwood caused by pulping conditions and structure of residual lignin. In: International Pulp Bleaching Conference. TAPPI, Helsinki, 1998 Book 2. pgs. 323–328.
496.
Backstrom, M. and Jensen, A. – Modified kraft pulping to high kappa numbers. In: Annual General Conference. APPITA, (cidade: 1999 Volume 1 pgs. 101–109.
497.
Dahlman, O.; Sjöberg, J.; Jansson, U. B. and Larsson, P. O. – Effects of surface hardwood xylan on the quality of softwood pulps. Nordic Pulp and Paper Research Journal, 18 (3): 310–315 (2003).
498.
Saake, B.; Till, B. and Puls, J. – The effect of xylan adsorption on the properties of sufite and kraft pulps. In: International Symposium on Wood, Fibre and Pulping Chemistry. APPITA, Auckland, 2005 pgs 131–146.
499.
Danielsson, S. and Lindström, M. E. – Influence of birch xylan adsorption during kraft cooking on softwood pulp strength. Nordic Pulp and Paper Research Journal, 20 (4): 436 (2005).
500.
Walker, E. – Effects of the uronic acid carboxyls on the sorption of 4-O-methylglucuronoarabinoxylans and their influence on papermaking properties of cellulose fibres. Tappi, 48 (5): 298 (1965).
501.
Colodette, J. L., Gomide, J. L., Girard, R., Jaaskelainen, A. S., Argyropoulos, D. S. – Influence of pulping conditions on hardwood pulp yield. Quality and bleachability. In: International Pulp Bleaching Conference, Halifax, 2000, pg 41–48 – Oral presentation.
48.
Lyytikainen, K.; Saukkonen, E.; Kajanto, I. and Kayhko, J. – The effect of hemicellulose extraction on fibre charge properties and retention behavior of kraft pulp fibres, Bioresources, 6 (1): 219–231 (2011).
62.
Joutsimo, O. P. and Asikainen, S. – Effect of fiber wall pore structure on pulp sheet density of softwood kraft pulp fibers. BioResources, 8 (2):2719–2737 (2013).
467.
Dinus, R. J. and Welt, T. – Tailoring fiber properties to paper manufacture: recent developments. Tappi Journal, 80 (4): 127–139 (1997).
478.
Jardim, C. – Variações na densidade básica da madeira versus impacto no processo produtivo. In: 1° Encontro de Operadores de Pátio de Madeira e 5° Encontro de Operadores de Linhas de Fibras. ABTCP. 2019.
492.
Kubelka, V.; Wizani, W.; Neubauer, G. and Kappel, J. – ENERBATCH extended delignification for TCF pulp. In: International Non-Chlorine Bleaching Conference. Pulp & Paper/Emerging Technology Transfer, Amelia Island, 1994 Paper 3-2 23 pgs.
502.
El-Hosseiny, F. – Influence of the “Giertz effect” on development of short-span compression strength. Tappi Journal, 81 (2): 177–180 (1996).
503.
Moss, P. A. and Pere, J. – Microscopical study on the effects of partial removal of xylan on the swelling properties of birch Kraft pulp fibres. Nordic Pulp and Paper Research Journal, 21 (1): 8–12 (2006).
504.
Antes, R. and Joustino, O. P. – Fiber surface and paper technical properties of Eucalyptus globulus and Eucalyptus nitens – pulps after modified cooking and bleaching. BioResources, 10 (1): 1599–1616 (2015).
505.
506.
Pere, J.; Pääkkönen, E., Ji, Y.; Retulainen, E. – Influence of the hemicellulose content on the fiber properties, strength, and formability of handsheets. BioResources, 14 (1): 251–263 (2019).
507.
Saucedo, J. J. and González, S. F. – Identificación y efecto de las hemiceluloses sobre las propriedades físicas de la celulosa y papel. In: II Congresso Latino-Americano de Celulose y Papel. AITIPE, Torremolinos, 1981 pgs. 143–151.
508.
Hu, G.; Shiyu, F. and Liu, H. – Hemicellulose in pulp affects paper properties and printability. Appita Journal, 66 (2) 139–141 (2013).
509.
Hakanen, A. and Teder, A. – Modified kraft cooking with polysulfide: yield, viscosity, and physical properties. Tappi Journal, 80 (7): 189 (1997).
510.
Wågberg, E. and Lindström, M. E. – The hemicellulose composition of pulp fibres and their ability to endure mechanical treatment. Tappi Journal, 6 (10): 19–24 (2007).
511.
Genco, J. M. – Fundamental process in stock preparation and refining. In: Pulping Conference. TAPPI, Orlando, /1999 pgs. 57–95.
512.
Resquin, F.; Barrichelo, L. E. G.; Silva Jr, F. G. da; Brito, J. O. and Sansigolo, C. A. – Wood quality for Kraft pulping of Eucalyptus globulus origins planted in Uruguay. Scientia Forestalis (72): 57 (2006).
513.
Barbosa, B. M.; Colodette, J. L.; Muguet, M. C dos S.; Gomes, V. J.; e Rubens, C. de O. – Effects of xylan in eucalyptus pulp production. CERNE, 22 (2): 207–213 (2016).
514.
Antes, R. and Joutsimo, O. P. – Effect of modified cooking on fiber wall structure of E. globulus and E. nitens. BioResources, 10 (2): 2195–2212 (2015).
515.
Kersavage, P. C. – Moisture content effect on tensile properties of individual Douglas-fir latewood tracheids. Wood and Fiber Science, 5 (2): 105–117 (1973).
576.
Fagerstedt, K. V.; Kukkola, E. M.; Koistinen, V. V. T.; Takahashi, J. and Marjamaa, K. – Cell wall lignin is polymerised by class III secretable plant peroxidases in Norway spruce. Journal of Integrative Plant Biology, 52 (2): 186–194 (2010).
577.
Du, X.; Gellerstedt, G. and Li, J. – Universal fractionation of lignin–carbohydrate complexes (LCCS) from lignocellulosic biomass: An example using spruce wood. Plant Journal, 74 (2): 328–338 (2013).
578.
Youssefian, S. and Rahbar, N. – Molecular origin of strength and stiffness in bamboo fibrils. Scientific Reports, 5: 1–13 (2015).
579.
571.
Salmén, L.; Olsson, A-M.; Stevanic, J. S.; Simonović, J. and Radotić, K. – Structural organization of the wood polymers in the wood fibre. BioResources, 7 (1): 521–532 (2012).
523.
Chabbert, B.; Tollier, M. T.; Monties, B. – Biological variability in lignification of maize: Expression oft he brown midbrid bm2 mutation. Journal of Science Food Agriculture, 64, 455–460 (1994).
524.
Lani, T. B. T; Iiyama, K.; Stone, B. – Lignin and hydroxycin-namic acids in walls of brown midrib mutants of sorghun, pearl millet and maize stems. Journal of Science Food Agriculture, 406y 174–178 (1996).
525.
Thorstensson, E. M. G.; Buxton, D. R.; Chemey, J. H. Apparent inhibition to digestion by lignin in normal and brown midrib stenu. Journal of Science Food Agriculture, 59: 183–188 (1992).
526.
Morrison, W H.; Akin, D. E.; Himmelsbach, D. S.; Gamble, G. R. – Investigation and esterand ether-linked phenolic constituents of cell wall types of normal and brown midrib pearl millet using chemical isolation, microspectrophotom-etryandl3CNMRspectroscopy. Journal of Science Food Agriculture, 63, 329–337 (1993).
527.
Grenet, E.; Barry, R. – Microbial degradation of normal maize and bm3 maize in the rumen observed by scanning electron microscopy. Journal of Science Food Agriculture, 59y, 199–210 (1991).
346.
Zani Filho, J.; Stape, J. L.; Ribeiro, F. de A. and Balloni, E. A. – Programa de melhoramento genético de E. urophylla S. T. Blake, através de seleção precoce. In: VI Congresso Florestal Brasileiro. SBS/SBEF, Campos do Jordão: 22-27/09/1990 Volume 3: 464–471.
359.
Carneiro, C. J. C.; Amaral Santos, C. A. S. do e Manfredi, V. – Caracterização da variabilidade longitudinal da árvore visando a produção de celulose. In: XXX Congresso Anual de Celulose e Papel da ABTCP, São Paulo, 1997 pgs. 271–280.
363.
Manfredi, V. and Barrichelo, L. E. G. – Variação do rendimento em celulose sulfato ao longo do tronco do eucalipto. In: XVIII Congresso Anual de Celulose e Papel da ABTCP, São Paulo, 1985 pgs. 5–29.
573.
Minor, J. L.; Atalla, R. H. and Harten, T. M. – Improving inter fibre bonding of recycled fibres. Journal of Pulp and Paper Science, 19 (4): J152–155 (1993).
574.
Tikka, P.; Tähkanen, H. and Kovasin, K. – Chip thickness versus kraft pulping performance: experimental by multiple hanging basket in batch digesters. Tappi Journal, 76 (3): 131–136 (1993).
486.
Perissoto, D. O.; Nascimento, E. A. and Morais, S. A. L. – Estudo dos extrativos da polpa kraft de eucalipto. Parte 2: Branqueamento dos extrativos e da polpa kraft. O Papel, 61 (8): 69–72 (2000).
361.
Turner, C. H.; Balodis, V. and Dean, G. H. – Variability in pulping quality of E. globulus from Tasmanian provenances. Appita Journal, 36 (5): 371–376 (1983).
367.
Valente, C. A. and Furtado, F. P. – O melhoramento do Eucalyptus globulus. Uma abordagem ecológica. Pasta e Papel (5): 33–37 (1992).
516.
Hall, M. J.; Hansen, N. W. and Rudra, A. B. – The effect of species, age and wood characteristics on eucalypt Kraft pulp quality. Appita Journal, 26 (5): 348 (1973).
529.
Claudio-da-Silva Jr, E. – The Flexibility of pulp fibers – a structural approach. In: International Paper Physics Conference. TAPPI/CPPA, Harwichport, 1983 pgs. 13–25.
530.
531.
Parhan, P. A. – Wood physical properties. In: Pulp and Paper Manufacture – Volume 1 – Properties of Fibrous Raw Materials and Their Preparation for Pulping. Ed. Kocureck, M. J. and Stevens, C. F. B. The Technical Committee of the Paper Industry, Atlanta/Montreal, 1983 pg. 46–54
532.
Miranda, C. R. and Barrichelo, L. E. G. – Celulose de madeira de E. citriodora: influência do tamanho dos cavacos. In: XXIII Congresso Anual de Celulose e Papel. ABTCP, São Paulo: 1990 pgs. 01–34.
533.
Evans, R.; Kibblewhite, R. P. and Stringer, S. – Kraft pulp fibre property prediction from wood properties in eleven radiata pine clones. Appita Journal, 50 (1): 25 (1997)
534.
Evans, R.; Kibblewhite, R. P. and Lausberg, M. – Relationships between wood and pulp properties of twenty-five 13 year old radiata pine trees. Appita Journal, 52 (2): 133–139 (1999).
181.
Foelkel, C. E. B.; Mora, E. and Menochelli, S. – Densidade básica: sua verdadeira utilidade como índice de qualidade da madeira de eucalipto para a produção de celulose. In: VI Congresso Florestal Brasileiro. SBS/SBEF, Campos do Jordão: 1990 pgs. 719–728.
381.
Ferreira, C.; Fantini Júnior, M.; Oliveira, R.C. de; Colodette, J.L. and Gomide, J.L. – Critérios de seleção de clones para maximizar rendimento e qualidade da celulose. In: Colóquio Internacional sobre Celulose Kraft de Eucalipto, UFV, Viçosa, 2003 pgs. 39–58.
383.
Vale, A. T do; Moura, V. P. G.; Martins, I. S. and Rezende, D. C. A. de – Densidade básica média, em função da profundidade de penetração do pino do “Pilodyn”e da classe diamétrica, e variação axial da densidade básica em Eucalyptus grandis Hill ex Maiden. Revista Árvore, 19 (1): 80 (1995).
482.
Xu, E. C. and Saborin, M. J. – Evaluation of APMP and BCTMP for market pulps from South American eucalyptus. Tappi Journal, 82 (12): 75–82 (1999).
517.
Whiteman, P. H.; Cameron, J. W. and Farrington, A. – Breeding trees for improved pulp and paper production. Appita Journal, 49 (1): 50–53 (1996).
535.
Oda, S.; Mello, E. J.; Menck, A. L. de M. and Costa, P. C. – Variação da densidade básica da madeira de clones de E. grandis e E. saligna em diferentes povoamentos, com seis anos de idade. In: VI Congresso Florestal Brasileiro. SBS/SBEF, Campos do Jordão, 1990 Volume 3: 701–705.
536.
Rezende, M. A. de; Saglietti, J. R. C. and Marinez, J. C. – Estudo das variações de massa específica e retratibilidade da madeira do Eucalyptus saligna. In: VII Congresso Florestal Brasileiro. SBS/SBEF, Curitiba, 1993. Volume 2 pgs. 629–637.
537.
Duffy, G. G. and Kibblewhite, R. P. – A new method of relating wood density, pulp quality and paper properties. Appita Journal, 42 (3): 209–214 (1989).
538.
Botrel, M. C. G.; da Silva, J. R. M.; Trugilho, P. F.; Rosado, S. C. da S. and Fernandes, B. R. – Ganho genético em propriedades físicas e mecânicas de clones de Eucalyptus. Scientia Forestalis (76): 13–19 (2007).
539.
Dias, R. L. V. and Claudio-da-Silva Jr., E – Pulp and paper properties as influenced by wood density. In: 8th Fundamental Research Symposium. PIRA, Oxford, 1995 pgs. 7–35.
540.
Moraes, M. L. T. – Variação genética da densidade básica da madeira em progênies de Eucalyptus grandis Hill ex-Maiden e suas relações com as características de crescimento. Master’s Thesis, ESALQ/USP, Piracicaba, 1987 115 pgs.
541.
Wehr, T. R. and Barrichelo, L. E. G. – Cozimento kraft com madeira de Eucalyptus grandis de diferentes densidades básicas e dimensões de cavacos. In: XXV Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1992 pgs. 161–177.
542.
Shimoyama, V. R. de S. – Variações da densidade básica e características anatômicas e químicas da madeira em Eucalyptus spp. Master’s Thesis, ESALQ/USP, Piracicaba, 1990 93 pgs.
207.
Kibblewhite, R. P., Evans, R. and Riddell, M. J. C. – Handsheet property prediction from kraft-fibre and wood-tracheid properties in eleven radiata pine clones. Appita Journal, 50 (2): 131–138 (1997).
382.
Xu, E. C. and Saborin, M. J. – Evaluation of APMP and BCTMP for market pulps from South American eucalyptus. Tappi Journal, 82 (12): 75–82 (1999).
543.
Eskelinen, E.; Hu, S. H. and Marton, R. – Wood mechanics and mechanical pulping. Appita, 36 (1): 32–38 (1992).
544.
Demuner, B. J. and Bertolucci, F. de L. G. – Seleção florestal: uma nova abordagem a partir de estimativas de parâmetros genéticos e fenotípicos para características da madeira e polpa de eucalipto. In: XXVI Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1993 pgs. 411–423.
281.
Silva Jr., F. G. da e Braga, E. P. – Potencialidade da seleção cde E. urophylla em função da qualidade da madeira destinada à produção de celulose. In: XXX Congresso anual de Celulose e Papel. ABTCP, São Paulo, 1997 pg. 281–292.
288.
Willians, M. D.; Beadle, C. L.; Turnbull, C. R. A.; Dean, G.H. and French, J. – Papermaking potential of plantation eucalypt. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRCTHF/IUFRO, Hobart, 1995 pgs. 73–78.
304.
Valeri, S.; Aguiar, I. B. de; Banzatto, D. A. and Alvarenga, S. F. – Variação da densidade básica da madeira de E. grandis Hill ex-Maiden com a altura do caule e aplicação de fósforo e calcário dolomítico. In: VI Congresso Florestal Brasileiro. SBS/SBEF, Campos do Jordão, 1990 Volume 3: 746–756.
375.
Flores, D. M. M.; Cardoso, G. V.; Foelkel, C. E. B. and Frizzo, S. M. B. – Amostragem de árvores para estudos tecnológicos da madeira para produção de celulose: tamanho da amostra, número mínimo de repetições e variabilidade das popriedades para um clone de Eucalyptus saligna Smith. O Papel, 61 (3): 44–49, 52, 55 (2000).
483.
Bertolucci, F. L. G.; Demuner, B. J.; Garcia, S. L. R. and Ikemori, Y. K. – Increasing fiber yield and quality at Aracruz. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRCTHF/IUFRO, Hobart, 1995 pgs. 31–34.
546.
Mohlin, U.-B e Miller, J. – Industrial refining – effects of refining conditions on fibre properties. In: III International Refining Conference and Exhibition. PIRA/IPST, Atlanta, 1995 Paper 4.
547.
Zobel, B. J. and Buijteen, J. P. – Wood variation: its causes and control. Spring Series in Wood Science, Series Ed. Timell, T. E. Spring Verlag, Berlim, 1989 363 pgs.
548.
Meadows, D. G. – An eye to the future: stock preparation. Tappi Journal, 81 (2): 70–78 (1998).
549.
Rezende, M. A. and Ferraz, E. S. B. – Densidade anual da madeira de Eucalyptus grandis. IPEF (30): 37–41 (1985).
550.
Zhong, R. and Ye, Z-H. – Secondary cell walls: biosynthesis, patterned deposition and transcriptional regulation. Plant and Cell Physiology, 56 (2): 195–214 (2015).
551.
Barrichelo, L. E. G. and Brito, J. O. – Variabilidade longitudinal e radial da madeira de Eucalyptus grandis. In: XVII Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1984 pgs. 403–409.
552.
Zobel, B. J. – Clonal forestry in the Eucalyptus. In: Clonal Forestry II – Conservation and Application. Ed. Ahuja, M. R. and Libby, W. J. Springer-Verlag, Berlin, 1993 Chapter 7 pgs. 139–148.
553.
Fonseca, S. M. da; Fernandes, D. E.; Borges, J. F.; Martini, S. L. and Silveira, P. N. – Efeitos do espaçamento e da idade de corte sobre a produtividade e qualidade da madeira e o custo da celulose kraft de eucalipto. In: XXIX Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1996 pgs. 437–451.
554.
Foelkel, C. E. B. – A madeira do eucalipto: da floresta ao digestor. Boletim Informativo do IPEF, 6 (20): 1–25 (1978).
556.
Corson, S. R. – Directions in New Zealand mechanical pulping research Part 1: development of research effort; research activity; influence of wood quality; and process influences. Appita, 46 (2): 143–148 (1993).
561.
Panshin, A. J. and Zeeuw, C. de – Textbook of Wood Technology, 4th Edition. McGraw Hill, New York, 1980. 722 pgs.
518.
Ferreira, M. and Santos, P. E. F. – Eucalyptus wood traits for species/provenances/plus trees and clones planted in Brazil – a review applied to genetic improvement for pulp production. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRCTHF/IUFRO, Hobart, 1995 pgs. 258–260.
545.
Malan, F. S. and Arbudthnot, A. L. – The inter-relationship between density and fibre properties of South African grown Eucalyptus grandis. In: Eucalypt Plantations: Improving Fibre Yield and Quality. CRCTHF/IUFRO, Hobart, 1995 pgs. 116–120.
557.
Malan, F. S. – Variation, association and inheritance of juvenile wood properties of Eucalyptus grandis Hill ex-Maiden with special reference to the effect of rate of grown. South African Forestry Journal (157): 16–23 (1991).
558.
Danforth, D. W. – Stock preparation: theory and practice. Southern Pulp and Paper Manufacture, 32 (7): 52–53 (1969).
559.
560.
Shimoyama, V. R. S. and Barrichelo, L. E. G. – Influência das características anatômicas e químicas sobre a densidade básica da madeira de Eucalyptus. In: XXIV Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1991 pgs. 23–26.
562.
Laivans, G. V. and Scallan, A. M. – Removal of water from pulps by pressing, Tappi Journal, 77(3), 125 (1994).
563.
Carrillo, I.; Aguayo, M. G.; Mendonça, S. V. R. T. and Elissetche, J. P. – Variations in wood anatomy and fiber biometry of Eucalyptus globulus genotypes with diferent wood density. Wood Research. 60 (1): 1–10 (2015).
564.
Barrichelo, L. E. G.; Brito, J. O.; Couto, M. T. Z. do e Campinhos Jr., E. – Densidade básica, teor de holocelulose e rendimento em celulose de madeira de Eucalyptus grandis. Silvicultura, 8 (32): 802–808 (1983).
307.
Kärenlampi, P. – Effect of distributions of fibre properties on tensile strength of paper: a closed-form theory. Journal of Pulp and Paper Science, 21 (4): 138–143 (1995).
369.
Greaves, B. L.; Borralho, N. M. G. and Raymond, C. A. – Breending objective for plantation eucalypts grown for production of kraft pulp. Forest Science (43): 465 (1997).
194.
DuPlooy, A. B. J. – The relationship between wood and pulp properties of E. grandis (Hill ex-maiden) grown in South Africa. Appita, 33 (4): 257–264 (1980).
565.
Trugilho, P. F.; Mendes, L. M.; Lima, J. T. and Silva, J. R. M. da – Uso de técnicas multivariadas na classificação de clones de eucalipto para produção de celulose e papel. In: XXX Congresso Anual de Celulose e Papel. ABTCP, São Paulo, 1997 pgs. 309–315.
567.
Silva, D. de J., Oliveira, R. C. de; Colodette, J. L. and Gomide, J. L – Impacto da qualidade da madeira na deslignificação, no branqueamento e nas propriedades físico-mecânicas da polpa kraft de eucalipto. In: XXIX Congresso Anual de Celulose e Papel. ABTCP, São Paulo 1996 pgs. 453–470.
568.
Groot, B. de; Van der Kolk, J. C.; Van Dam, J. E. G. and Riet, K. V. – Papermaking characteristics of alkaline hemp-woodly-core pulps. Tappi Journal, 82 (7): 107–111 (1999).
43.
569.
570.
Kellogg, R. M. and Wangaard, F. F. – Variation in the cell wall density of wood. Wood and Fiber Science, 3: 1508–1542 (1969).
521.
Gonzaga, J. V. – Qualidade da madeira e da celulose kraft de treze espécies de Eucalyptus. Master’s Thesis, Universidade Federal de Viçosa, Viçosa, 1983 119 p.
522.
Bhat, K. M. and Benny, A. G. – Improving fibre yield and quality of eucalyptus in India: problems and prospects. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRCTHF/IUFRO, Hobart, 1995 pgs. 255–257.
29.
Pihlajamäki, P. and Hytonen, H. – Mixed tropical hardwood – a minor and declining source of fibre for paper. Twogether, n° 17: 2–6 (2004).
519.
Banham, P. W.; Orme, K. and Russell, S. L. – Pulpwood qualities required for the cold soda pulping process. In: Eucalypt Plantations: Improving Fibre Yield and Quality Conference. CRCTHF/IUFRO, Hobart, 1995 pgs. 1–4.
Metadata
Title
Wood as Raw Material Source
Author
Vail Manfredi
Copyright Year
2024
Book
Eucalyptus Kraft Pulp Refining

Print ISBN: 978-3-031-47284-8

Electronic ISBN: 978-3-031-47285-5

Copyright Year: 2024

DOI
https://doi.org/10.1007/978-3-031-47285-5_5

Premium Partners

    Image Credits