Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
The International Journal of Advanced Manufacturing Technology
Published in: The International Journal of Advanced Manufacturing Technology 5-6/2021

06-07-2021 | ORIGINAL ARTICLE

A characterization of laser cleaning painting layer from steel surface based on thermodynamic model

Authors: Yao Lu, Ye Ding, MaoLu Wang, LiJun Yang, Yang Wang

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2021

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

In this study, the environmentally friendly nanosecond ultraviolet (UV) laser is an innovatively employed laser cleaning to remove the painting layer from the AH36 steel substrate. The feasibility of UV laser cleaning the painting layer is innovatively proposed and it has been calculated by the model theoretically, followed by elaborating the prominent interaction mechanism of UV laser exactly. The initial cleaning threshold and completely cleaning threshold are 2 J/cm2 and 5 J/cm2, respectively. Afterwards, the UV laser-cleaned surface quality is evaluated by the scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), optical microscopy (OM), and optical profiler (OP), respectively. The mechanical properties have enhanced dramatically after laser cleaning and characterized by the Vickers hardness tester and universal testing machine. By varying laser fluences (2, 5, 7 J/cm2) during laser cleaning, microstructures registering various sizes of corrugated shaped, craters, and ring shaped could be acquired. In addition, the mechanical properties analysis including rapid melting, quenching, and dislocation density effects illustrates that laser cleaning could effectively increase surface microhardness, tensile strength, and bending strength. Thus, laser cleaning method has emerged as a favorable means to strip painting layer in lieu of traditional methods for marine industry as well as this study could promote the development of laser cleaning in the field of marine engineering.
previous article Experimental study on the reduction of process-induced deformation when milling a low stiffness structure made of Ti6Al4V titanium alloy
next article Real-time chatter detection via iterative Vold-Kalman filter and energy entropy

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Literature
1.
Zhang FD, Liu H, Suebka C, Liu YX, Liu Z, Guo W, Cheng YM, Zhang SL, Li L (2018) Corrosion behaviour of laser-cleaned AA7024 aluminium alloy. Appl Surf Sci 435:452–461CrossRef
2.
Ze T, Lei ZL, Chen X, Chen YB (2020) Evaluation of laser cleaning for defouling of marine biofilm contamination on aluminum alloys. Appl Surf Sci 499:144060CrossRef
3.
Yue LY, Wang ZB, Li L (2012) Material morphological characteristics in laser ablation of alpha case from titanium alloy. Appl Surf Sci 258:8065–8071CrossRef
4.
Ze T, Lei ZL, Chen X, Chen YB (2020) Nanosecond pulsed fiber laser cleaning of natural marine micro-biofoulings from the surface of aluminum alloy. J Clean Prod 244:118724CrossRef
5.
Shi TY, Wang CM, Mi GY, Yan F (2019) A study of microstructure and mechanical properties of aluminum alloy using laser cleaning. J Manuf Process 42:60–66CrossRef
6.
Mhaede M (2012) Influence of surface treatments on surface layer properties, fatigue and corrosion fatigue performance of AA7075 T73. Mater Des 41:61–66CrossRef
7.
Qiang W, Guan Y, Cong B, Qi B (2016) Laser cleaning of commercial Al alloy surface for tungsten inert gas welding. J Laser Appl 28(2):022507
8.
Zhang ZY, Zhang JY, Wang YB, Zhao SS, Lin XC, Li XY (2018) Removal of paint layer by layer using a 20 kHz 140 ns quasi-continuous wave laser. Optik 174:46–55CrossRef
9.
Kumar M, Bhargava P, Biswas AK, Sahu S, Mandloi V, Ittoop MO, Khattak BQ, Tiwari MK, Kukreja LM (2013) Epoxy-paint stripping using TEA CO2 laser: determination of threshold fluence and the process parameters. Opt Laser Technol 46:29–36CrossRef
10.
Lu Y, Yang LJ, Wang ML, Wang Y (2020) Improved thermal stress model and its application in ultraviolet nanosecond laser cleaning of paint. Appl Opt 59(25):7652–7659CrossRef
11.
Lu Y, Ding Y, Wang GW, Yang LJ (2020) Ultraviolet laser cleaning and surface characterization of AH36 steel for rust removal. J Laser Appl 32(3):032023CrossRef
12.
Chen GX, Kwee TJ, Tan KP, Choo YS, Hong MH (2012) High-power fiber laser cleaning for green shipbuilding. J Laser Micro/Nanoeng 7:249–253CrossRef
13.
Chen GX, Kwee TJ, Tan KP, Choo YS, Hong MH (2010) Laser cleaning of steel for paint removal. Appl Phys A Mater Sci Process 101:249–253CrossRef
14.
Fox JA (1974) Effect of water and paint coatings on laser-irradiated targets. Appl Phys Lett 24(10):461–464CrossRef
15.
Liu K, Garmire E (1995) Paint removal using lasers. Appl Opt 34(21):4409–4415CrossRef
16.
Zhao HC, Qiao YL, Du X, Wang SJ (2020) Laser cleaning performance and mechanism in stripping of Polyacrylate resin paint. Appl Phys A 126:1–14CrossRef
17.
Yang J, Han JH, Duan T, Sun NC, Guo C, Feng GF (2013) Mechanical analysis of paint film stripping from aluminum plate surface by means of nanosecond laser. Laser Technol 37:718–722
18.
Li XK, Zhang Q, Zhou X, Zhu D, Liu Q (2018) The influence of nanosecond laser pulse energy density for paint removal. Optik 156:841–846CrossRef
19.
Yao YL, Chen H, Zhang W (2005) Time scale effects in laser material removal: a review. Int J Adv Manuf Technol 26(5-6):598–608CrossRef
20.
Zhao HC, Qiao YL, Zhang Q, Du X, Zang Y, Liu XT, Han BY (2020) Study on the characteristics and mechanism of pulsed laser cleaning of polyacrylate resin coating on aluminum alloy substrates. Appl Opt 59(23):7053–7065CrossRef
21.
Jafarabadi MA, Mahdieh MH (2015) Investigation of phase explosion in aluminum induced by nanosecond double pulse technique. Appl Surf Sci 346:263–269CrossRef
22.
Patel DN, Pandey PK, Thareja RK (2013) Stoichiometry of laser ablated brass nanoparticles in water and air. Appl Opt 52(31):7592–7601CrossRef
23.
Vidal F, Johnston TW, Laville S, Barthélemy O, Chaker M, Le Drogoff B, Margot J, Sabsabi M (2001) Critical-point phase separation in laser ablation of conductors. Phys Rev Lett 86(12):2573–2576CrossRef
24.
Tang QH, Zhou D, Wang YL, Liu GF (2015) Laser cleaning of sulfide scale on compressor impeller blade. Appl Surf Sci 355:334–340CrossRef
25.
Han D, Xu J, Wang Z, Yang N, Li X, Qian Y, Li G, Dai R, Xu S (2018) Penetrating effect of high-intensity infrared laser pulses through body tissue. RSC Adv 8(56):32344–32357CrossRef
26.
She M, Kim D, Grigoropoulos CP (1999) Liquid-assisted pulsed laser cleaning using near-infrared and ultraviolet radiation. J Appl Phys 86(11):6519–6524CrossRef
27.
Kim TG, Yoo YS, Lee SH, Park JG (2009) Effects of size, humidity, and aging on particle removal from Si wafers. Microelectron Eng 86:145–149CrossRef
28.
Han JH, Cui X, Wang S, Feng G, Deng G, Hu R (2017) Laser effects based optimal laser parameter identifications for paint removal from metal substrate at 1064 nm: a multi-pulse model. J Mod Opt 64(19):1947–1959CrossRef
29.
Temnov VV, Sokolowski-Tinten K, Zhou P, El-Khamhawy A, Von Der Linde D (2006) Multiphoton ionization in dielectrics: comparison of circular and linear polarization. Phys Rev Lett 97(23):237403CrossRef
30.
Amoruso S (1999) Modeling of UV pulsed-laser ablation of metallic targets. Appl Phys A 69(3):323–332CrossRef
31.
Lu Y, Yang LJ, Wang Y, Chen H, Guo B, Tian Z (2019) Paint removal on the 5A06 aluminum alloy using a continuous wave fiber laser. Coatings 9(8):488CrossRef
32.
Watkins K, McMahon M, Steen W (1997) Microstructure and corrosion properties of laser surface processed aluminium alloys: A review. Mater Sci Eng A 231:55–61CrossRef
33.
Li R, Ferreira M, Almeida A, Vilar R, Watkins K, McMahon M, Steen W (1996) Localized corrosion of laser surface melted 2024-T351 aluminium alloy. Surf Coat Technol 81:290–296CrossRef
34.
Zou WF, Xie YM, Xiao X, Zeng XZ, Luo Y (2014) Application of thermal stress model to paint removal by Q-switched Nd: YAG laser. Chin Phys B 23(7):074205CrossRef
35.
Oliveira V, Vilar R (2007) Finite element simulation of pulsed laser ablation of titanium carbide. Appl Surf Sci 253(19):7810–7814CrossRef
36.
Vasantgadkar NA, Bhandarkar UV, Joshi SS (2010) A finite element model to predict the ablation depth in pulsed laser ablation. Thin Solid Films 519(4):1421–1430CrossRef
37.
Yue LY, Wang ZB, Li L (2013) Modeling and simulation of laser cleaning of tapered micro-slots with different temporal pulses. Opt Laser Technol 45:533–539CrossRef
38.
Aguilar CA, Lu Y, Mao S, Chen S (2005) Direct micro-patterning of biodegradable polymers using ultraviolet and femtosecond lasers. Biomaterials 26(36):7642–7649CrossRef
39.
Arnold N, Bityurin N, Bäuerle D (1999) Laser-induced thermal degradation and ablation of polymers: bulk model. Appl Surf Sci 138:212–217CrossRef
40.
Srinivasan V, Smrtic MA, Babu SV (1986) Excimer laser etching of polymers. J Appl Phys 59(11):3861–3867CrossRef
41.
Serafetinides AA, Skordoulis CD, Maropoulou ML (1998) Picosecond and subpicosecond visible laser ablation of optically transparent polymers. Appl Surf Sci 135(1-4):276–284CrossRef
42.
Wang ZB, Hong MH, Lu YF, Wu DJ, Lan B (2003) Femtosecond laser ablation of polytetrafluoroethylene (Teflon) in ambient air. J Appl Phys 93(10):6375–6380CrossRef
43.
Lu Y, Yang LJ, Wang ML, Wang Y (2021) Simulation of nanosecond laser cleaning the paint based on the thermal stress. Optik 227:165589
44.
Fang RR, Zhang D, Li Z, Yang F, Li L, Tan X (2008) Improved thermal model and its application in UV high-power pulsed laser ablation of metal target. Solid State Commun 145(11-12):556–560CrossRef
45.
VonderLinde D, Sokolowski-Tinten K (2000) The physical mechanisms of short-pulse laser ablation. Appl Surf Sci 154:1–10CrossRef
46.
Lu Y, Guan YC, Li Y, Wang Y, Wang ML (2020) Nanosecond laser fabrication of superhydrophobic surface on 316L stainless steel and corrosion protection application. Colloids Surf A Physicochem Eng Asp 604:125259CrossRef
47.
Wang ZM, Zeng XY, Huang WL (2003) Parameters and surface performance of laser removal of rust layer on A3 steel. Surf Coat Technol 166(1):10–16CrossRef
48.
Cui Y, Shen JQ, Hu SS (2019) Microstructure and performance of the laser melted aluminum bronze layers with and without using activator. Mater Res Express 6(6):066513CrossRef
49.
He Y, Wei J, Liu JY, Wang Y (2020) Experimental study on the fabrication profile and mechanical properties by substrate-inclined angle using laser melting deposition (LMD) integrating with the substrate of stainless steel. Opt Laser Technol 125:106038CrossRef
50.
Nix WD (1989) Mechanical properties of thin films. Metall Trans A 20(11):2217–2245CrossRef
51.
Lewandowski JJ, Seifi M (2016) Metal additive manufacturing: a review of mechanical properties. Annu Rev Mater Res 46:151–186
52.
Su B, Wang B, Luo L, Wang L, Su Y, Wang F, Xu Y, Han B, Huang H, Guo J, Fu H (2021) The corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy: effects of HCl concentration and temperature. J Mater Sci Technol 74:143–154
53.
Su BX, Luo L, Wang B, Su Y, Wang L (1920) Annealed microstructure dependent corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy. J Mater Sci Technol 62:234–248CrossRef
54.
Crupi V, Gulielmino E, Maestro M, Marino A (2009) Fatigue analysis of butt welded AH36 steel joints: thermographic method and design S–N curve. Mar Struct 22(3):373–386CrossRef
55.
Cheon J, Kiran DV, Na SJ (2016) Thermal metallurgical analysis of GMA welded AH36 steel using CFD–FEM framework. Mater Des 91:230–241CrossRef
56.
Zhang GX, Hua XM, Huang Y, Zhang YL, Li F, Shen C, Cheng J (2020) Investigation on mechanism of oxide removal and plasma behavior during laser cleaning on aluminum alloy. Appl Surf Sci 506:144666CrossRef
57.
Gaskel D (2003) Introduction to the Thermodynamics of Materials, 4th edn. Taylor & Francis
Metadata
Title
A characterization of laser cleaning painting layer from steel surface based on thermodynamic model
Authors
Yao Lu
Ye Ding
MaoLu Wang
LiJun Yang
Yang Wang
Publication date
06-07-2021
Publisher
Springer London
Published in
The International Journal of Advanced Manufacturing Technology / Issue 5-6/2021
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI
https://doi.org/10.1007/s00170-021-07566-6

Other articles of this Issue 5-6/2021

The International Journal of Advanced Manufacturing Technology 5-6/2021 Go to the issue

ORIGINAL ARTICLE

Autonomous 3D geometry reconstruction through robot-manipulated optical sensors

ORIGINAL ARTICLE

Vortex formation mechanism and experimental research of abrasive flow precision machining special inner curved surface based on large eddy simulation

ORIGINAL ARTICLE

Finite element analysis of material flow in flat-rivet clinching process

ORIGINAL ARTICLE

The effect of superimposed ultrasonic vibration on tensile behavior of 6061-T6 aluminum alloy

ORIGINAL ARTICLE

New drawbead tester and numerical analysis of drawbead closure force

ORIGINAL ARTICLE

Investigation on the electrochemical assisted magnetic abrasive finishing for a stainless steel of SUS304

Premium Partners

    Image Credits