Top

Meccanica

Published in:

29-01-2018

A new constitutive equation for solid propellant with the effects of aging and viscoelastic Poisson’s ratio

Authors: Huiru Cui, Zhibin Shen, Haiyang Li

Published in: Meccanica | Issue 9/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A new constitutive equation for solid propellant with the effects of aging and viscoelastic Poisson’s ratio is proposed. Effects of thermo-oxidative aging and viscoelastic Poisson’s ratio are considered in this comprehensive constitutive equation with two sets of reduced time system coping with the time and temperature dependence. In order to simulate the single and combined effects of aging and viscoelastic Poisson’s ratio, constitutive equation is rewritten into an incremental form and implemented in the user subroutine UMAT at the platform of finite element code ABAQUS. Detailed procedure for acquiring the parameters in constitutive equation is introduced and conducted for the subsequent applied analysis. Two typical loading cases during the service life of solid rocket motor and four sets of combined constitutive models are simulated. Von Mises strain and stress distribution and their changes versus time are utilized as the main analysis index. The results show that the effects of aging and viscoelastic Poisson’s ratio or their combinations will improve or decrease the level and change the distribution of Von Mises strain and stress in varying degrees.

previous article Modeling and preliminary analysis of piezoelectric energy harvester based on cylindrical tube conveying fluctuating fluid

next article A computational study of the influence of surface roughness on material strength

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Cerri S, Bohn MA (2011) Aging behavior of rocket propellant formulations with ADN as oxidizer. In: Proceedings of 14th international seminar new trends and research in energetic materials

Deng B, Xie Y, Tang GJ (2014) Three-dimensional structural analysis approach for the aging of composite solid propellant grains. Propellants Explos Pyrotech 39(1):117–124CrossRef

Deng B, Tang GJ, Shen ZB (2015) Structural analysis of solid rocket motor grain with aging and damage effects. J Spacecr Rockets 52(2):331–339ADSCrossRef

Goncalves RFB, Silva RP, Rocco JAFF et al (2008) Thermal decomposition kinetics of aged solid propellant based on ammonium perchlorate-AP/HTPB binder. AIAA 2008-4969

Yıldırım HC, Özüpek S (2011) Structural assessment of a solid propellant rocket motor: effects of aging and damage. Aerosp Sci Technol 15:635–641CrossRef

Flynn JH (1966) A quick, direct method for the determination of activation energy from thermogravimetric data. Thermochim Acta 4:323

Brouwer GR, Weterings FP, Keizers H (2005) Evaluation of aging in composite propellant grains-part 2. AIAA 2005-3803

Brouwer GR, Keizers H, Buswell J et al (2005) Aging in composite propellant grains. AIAA 2004-4058

Overend RP, Chornet E (1990) Heavy-oil cracking: the case for nonhomogenous kinetics. Can J Phys 68(9):1105–1111ADSCrossRef

10.

Valanis KC, Peng STJ (1983) Deformation kinetics of ageing material. Polymer 24(12):1551–1557CrossRef

11.

Husband DM (1992) Use of dynamic mechanical measurements to determine the aging behavior of solid propellant. Propellants Explos Pyrotech 17(4):196–201CrossRef

12.

Ricco T, Smith TL (1990) Rate of physical aging of polycarbonate at a constant tensile strain. J Polym Sci 28(4):513–520CrossRef

13.

Cerri S, Bohn MA, Menke K et al (2014) Aging of ADN rocket propellant formulations with desmophen^®-based elastomer binder. Propellants Explos Pyrotech 39:526–537CrossRef

14.

Zhou JP (1993) A constitutive model of polymer materials including chemical ageing and mechanical damage and its experimental verification. Polymer 34(20):4252–4256CrossRef

15.

Cui HR, Tang GJ, Shen ZB (2016) Study on viscoelastic Poisson’s ratio of solid propellants using digital image correlation method. Propellants Explos Pyrotech 41(5):835–843CrossRef

16.

Shekhar H, Sahasrabudhe AD (2010) Longitudinal strain dependent variation of Poisson’s ratio for HTPB based solid rocket propellants in uni-axial tensile testing. Propellants Explos Pyrotech 36(6):558–563CrossRef

17.

Pan B, Yuan JY, Yu LP et al (2015) Determination of viscoelastic Poisson’s ratio of solid propellants using an accuracy-enhanced 2D digital image correlation technique. Propellants Explos Pyrotech 40(6):821–830CrossRef

18.

Chu HT, Chou JH (2011) Poisson ratio effect on stress behavior of propellant grains under ignition loading. J Propuls Power 27(3):662–667CrossRef

19.

Chyuan SW (2003) Studies of Poisson’s ratio variation for solid propellant grains under ignition pressure loading. Int J Press Vessels Pip 80(12):871–877CrossRef

20.

Swanson SR, Christensen LW (1983) A constitutive formulation for high-elongation propellants. J Spacecr Rockets 20(6):559–566ADSCrossRef

21.

Drozdov AD (1997) A constitutive model for nonlinear viscoelastic media. Int J Solids Struct 34(21):2685–2707CrossRefMATH

22.

Cui HR, Tang GJ, Shen ZB (2017) A three-dimensional viscoelastic constitutive model of solid propellant considering viscoelastic Poisson’s ratio and its implementation. Eur J Mech A Solids 61:235–244MathSciNet

23.

Tschoegl NW, Knauss WG, Emri I (2002) Poisson’s ratio in viscoelasticity: a critical review. Mech Time-Depend Mater 6(1):3–51ADSCrossRef

24.

Zhao BH (1995) An investigation on viscoelastic Poisson’s ratio and dynamic complex Poisson’s ratio. J Propuls Technol 3:1–7ADS

25.

Williams ML, Landel RF, Ferry JD (1955) The temperature dependence of relaxation mechanisms in a morphous polymers and other glass forming liquids. J Am Chem Soc 77(14):3701–3707CrossRef

26.

Alberto C, Stefano M (2002) Identification of a constitutive model for the simulation of time-dependent interlaminar debonding processes in composites. Comput Methods Appl Mech Eng 191:1861–1894CrossRefMATH

27.

Lai J, Bakker A (1996) 3-D Schapery representation for nonlinear viscoelasticity and finite element implementation. Comput Mech 18(3):182–191CrossRefMATH

28.

Enelund M, Mähler L, Runesson K et al (1999) Formulations and integration of the standard linear viscoelastic solid with fractional order rate laws. Int J Solids Struct 36(16):2417–2442CrossRefMATH

29.

Daniel WJT (2001) Three-dimensional orthotropic viscoelastic finite element model of a human ligament. Comput Methods Biomech Biomed Eng 4(3):265–279CrossRef

30.

Qu XL, Wang Y, Fu GY et al (2014) Efficiency and accuracy verification of the explicit numerical manifold method for dynamic problems. Rock Mech Rock Eng 48(3):1131–1142ADSCrossRef

31.

Doghri I (1993) Fully implicit integration and consistent tangent modulus in elasto-plastcity. Int J Numer Methods Eng 36:3915–3932CrossRefMATH

32.

Ahadi A, Krenk S (2003) Implicit integration of plasticity models for granular material. Comput Methods Appl Mech Eng 192(31):3471–3488ADSMathSciNetCrossRefMATH

33.

Hoppe RHW, Linsenmann C (2013) The finite element immersed boundary method for the numerical simulation of the motion of red blood cells in microfluidic flows. Springer, DordrechtCrossRefMATH

34.

Buechler MA, Luscher DJ (2014) A semi-implicit integration scheme for a combined viscoelastic-damage model of plastic bonded explosives. Int J Numer Methods Eng 99(1):54–78MathSciNetCrossRefMATH

35.

Meijer HEH (1997) Viscoelastic flow past a confined. J Nonnewton Fluid Mech 68:173–203CrossRef

36.

Fahmy MA (2013) Implicit–explicit time integration DRBEM for generalized magneto-thermoelasticity problems of rotating anisotropic viscoelastic functionally graded solids. Eng Anal Bound Elem 37(1):107–115MathSciNetCrossRefMATH

37.

Beijer JGJ, Spoormaker JL (2002) Solution strategies for FEM analysis with nonlinear viscoelastic polymers. Comput Struct 80(14):1213–1229CrossRef

38.

Yamaguchi I (1981) Speckle displacement and decorrelation in the diffraction and image fields for small object deformation. Opt Acta 28(10):1359–1376ADSCrossRef

39.

Bruck HA, McNeil SR, Sutton MA et al (1989) Digital image correlation using Newton–Raphson method of partial differential correction. Exp Mech 29(3):261–267CrossRef

40.

Peters WH, Ranson WF (1982) Digital imaging techniques in experimental stress analysis. Opt Eng 21(3):427–431ADSCrossRef

41.

Xu JS, Chen X, Wang HL et al (2014) Thermo-damege-viscoelastic constitutive model of HTPB composite propellant. Int J Solids Struct 51:3209–3217CrossRef

Title: A new constitutive equation for solid propellant with the effects of aging and viscoelastic Poisson’s ratio
Authors: Huiru Cui
Zhibin Shen
Haiyang Li
Publication date: 29-01-2018
Publisher: Springer Netherlands
Published in: Meccanica / Issue 9/2018
Print ISSN: 0025-6455
Electronic ISSN: 1572-9648
DOI: https://doi.org/10.1007/s11012-018-0829-z

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9/2018

Limit-analysis of a circular cylinder obeying the Green plasticity criterion and loaded in combined tension and torsion

A non-primitive boundary element technique for modeling flow through non-deformable porous medium using Brinkman equation

Torque on a slip sphere rotating in a semi-infinite micropolar fluid

Analysis of the influence of cooling hole arrangement on the protection of a gas turbine combustor liner

Influence of the magnetic field on merging flow of the Powell-Eyring fluids: an exact solution

Probabilistic and stochastic aspects of rubber hyperelasticity

Premium Partners