Top

Journal of Polymer Research

Published in:

01-05-2022 | Original Paper

A novel molecularly imprinted polymer material for the recognition of ochratoxin A

Authors: Yulin Wang, Yangyang Li, Yiling Luo, Kailian Zhou, Xiuzhen Qiu, Huishi Guo

Published in: Journal of Polymer Research | Issue 5/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A novel molecularly imprinted polymer composite material (OTA-MIPs) was prepared by the complexation between a metal–organic framework single-crystal ordered macropore ZIF-8 and a novel dummy template for the selective recognition of ochratoxin A (OTA). First, the structural analog of OTA was synthesized as a dummy template molecule. Then, OTA-MIPs were synthesized on the ZIF-8 surface by thermal polymerization. The as-synthesized OTA-MIPs were characterized by infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, and N₂ adsorption. The material exhibited a good network structure as well as a high specific surface area and pore size to facilitate the adsorption of target molecules. OTA-MIPs were examined for OTA re-binding properties. The Langmuir model fitted the adsorption data for OTA-MIPs better than the Freundlich model. At the same time, compared to the corresponding non-imprinted (OTA-NIPs) material, OTA-MIPs exhibited a 6.8-fold higher affinity for OTA. The molecular recognition ability of OTA-MIPs was highly specific for OTA compared to structurally similar compounds such as patulin and zearalenone. OTA-MIPs only exhibited a slight downward trend in terms of performance after five times of reuse. These results highlighted their potential for the concentration of OTA from complex food matrices.

previous article Biodegradable poly(butylene adipate-co-terephthalate)/poly(vinyl acetate) blends with improved rheological and mechanical properties

next article Synthesis of a poly(p-aminophenol)/starch/graphene oxide ternary nanocomposite for removal of methylene blue dye from aqueous solution

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Jiang CM, Lan LY, Yao Y, Zhao FN, Ping JF (2018) Recent progress in application of nanomaterial-enabled biosensors for ochratoxin A detection. Trend Anal Chem 102:236–249. https://doi.org/10.1016/j.trac.2018.02.007CrossRef

Karmanov AP, Kanarsky AV, Kocheva LS, Belyy VA, Semenov EI, Rachkova NG, Pokryshkin SA (2021) Chemical structure and polymer properties of wheat and cabbage lignins – Valuable biopolymers for biomedical applications. Polymer 220:123571. https://doi.org/10.1016/j.polymer.2021.123571CrossRef

Cabanes FJ, Bragulat MR (2018) Black aspergilli and ochratoxin A-producing species in foods. Curr Opin Food Sci 23:1–10. https://doi.org/10.1016/j.cofs.2018.01.006CrossRef

Duarte SC, Lino CM, Pena A (2011) Ochratoxin A in feed of food-producing animals: An undesirable mycotoxin with health and performance effects. Vet Microbiol 154:1–13. https://doi.org/10.1016/j.vetmic.2011.05.006CrossRefPubMed

Dai SL, Wu SJ, Duan N, Wang ZP (2016) A near-infrared magnetic aptasensor for Ochratoxin A based on near-infrared upconversion nanoparticles and magnetic nanoparticles. Talanta 158:246–253. https://doi.org/10.1016/j.talanta.2016.05.063CrossRefPubMed

Zamfir L, Geana I, Bourigua S, Rotariu L, Bala C, Errachid A, Jaffrezicrenault N (2011) Highly sensitive label-free immunosensor for ochratoxin A based on functionalized magnetic nanoparticles and EIS/SPR detection. Sensor Actuat B-Chem 159:178–184. https://doi.org/10.1016/j.snb.2011.06.069CrossRef

Lee TP, Saad B, Khayoon WS, Salleh B (2012) Molecularly imprinted polymer as sorbent in micro-solid phase extraction of ochratoxin A in coffee, grape juice and urine. Talanta 88:129–135. https://doi.org/10.1016/j.talanta.2011.10.021CrossRefPubMed

Lyu HX, Sun HR, Zhu YM, Wang J, Xie ZH, Li JX (2020) A double-recognized aptamer-molecularly imprinted monolithic column for high-specificity recognition of ochratoxin A. Anal Chim Acta 1103:97–105. https://doi.org/10.1016/j.aca.2019.12.052CrossRefPubMed

Sheng LF, Ren JT, Miao YQ, Wang JH, Wang EK (2011) PVP-coated graphene oxide for selective determination of ochratoxin A via quenching fluorescence of free aptamer. Biosens Bioelectron 26:3494–3499. https://doi.org/10.1016/j.bios.2011.01.032CrossRefPubMed

10.

Tian JY, Wei WQ, Wang JW, Ji SJ, Chen GC, Lu JS (2018) Fluorescence resonance energy transfer aptasensor between nanoceria and graphene quantum dots for the determination of ochratoxin A. Anal Chim Acta 1000:65–272. https://doi.org/10.1016/j.aca.2017.08.018CrossRef

11.

Reiter EV, Cichnamarkl M, Tansakul N, Shim W, Chung DH, Zentek J, Razzazifazeli E (2011) Sol-gel immunoaffinity chromatography for the clean-up of ochratoxin A contaminated grains. J Chromatogr A 1218:7627–7633. https://doi.org/10.1016/j.chroma.2011.07.013CrossRefPubMed

12.

Sugitakonishi Y, Tanaka T, Nakajima M, Fujita K, Norizuki H, Mochizuki N, Takatori K (2006) The comparison of two clean-up procedures, multifunctional column and immunoaffinity column for HPLC determination of ochratoxin a in cereals, raisins and green coffee beans. Talanta 69:650–655. https://doi.org/10.1016/j.talanta.2005.10.036CrossRef

13.

Chen YQ, Ding XY, Zhu DD, Lin XC, Xie ZH (2019) Preparation and evaluation of highly hydrophilic aptamer-based hybrid affinity monolith for on-column specific discrimination of ochratoxin A. Talanta 200:193–202. https://doi.org/10.1016/j.talanta.2019.03.053CrossRefPubMed

14.

Yang YJ, Zhou Y, Xing Y et al (2019) A Label-free aptasensor based on Aptamer/NH₂ Janus particles for ultrasensitive electrochemical detection of Ochratoxin A. Talanta 127:310–316. https://doi.org/10.1016/j.talanta.2019.02.015CrossRef

15.

Takuya KB, Otsuka KJ (2016) Recent progress in molecularly imprinted media by new preparation concepts and methodological approaches for selective separation of targeting compounds. Trend Anal Chem 199:102–109. https://doi.org/10.1016/j.trac.2015.08.008CrossRef

16.

Flores-Aguilar JF, Miranda JM, Rodriguez JA, Paez-Hernandez ME, Ibarra IS (2020) Selective Removal of Tetracycline Residue in Milk Samples Using a Molecularly Imprinted Polymer. J Polym Res 27(7):1–12. https://doi.org/10.1007/S10965-020-02139-9CrossRef

17.

Qiu XZ, Xu XY, Liang Y, Guo HS (2018) The molecularly imprinted polymer supported by anodic alumina oxide nanotubes membrane for efficient recognition of chloropropanols in vegetable oils. Food Chem 258:295–300. https://doi.org/10.1016/j.foodchem.2018.03.071CrossRefPubMed

18.

Wu SQ, Xu ZG, Yuan QH, Tang YW, Zuo XJ, Lai JP (2011) Recognition characteristics of molecularly imprinted microspheres for triazine herbicides using hydrogen-bond array strategy and their analytical applications for corn and soil samples. J Chromatogr A 1218:1340–1346. https://doi.org/10.1016/j.chroma.2011.01.008CrossRefPubMed

19.

Shen K, Zhang L, Chen XD et al (2018) Ordered macro-microporous metal-organic framework single crystals. Science 359:206–210. https://doi.org/10.1126/science.aao3403CrossRefPubMed

20.

Baggiani C, Biagioli F, Anfossi L, Giovannoli C, Passini C, Giraudi G (2013) Effect of the mimic structure on the molecular recognition properties of molecularly imprinted polymers for ochratoxin a prepared by a fragmental approach. React Funct Polym 73(6):833–837. https://doi.org/10.1016/j.reactfunctpolym.2013.03.018CrossRef

21.

Jodlbauer J, Maier NM, Lindner W (2002) Towards ochratoxin a selective molecularly imprinted polymers for solid-phase extraction. J Chromatogr A 945(1–2):45–63. https://doi.org/10.1016/S0021-9673(01)01504-7CrossRefPubMed

22.

Liu Y, Su ZP, Wang J, Gong ZQ, Lyu HX, Xie ZH (2021) Molecularly imprinted polymer with mixed-mode mechanism for selective extraction and on-line detection of ochratoxin A in beer sample. Microchem J 170:106696–106698. https://doi.org/10.1016/j.microc.2021.106696CrossRef

23.

Turan E, Sahin F (2016) Molecularly imprinted biocompatible magnetic nanoparticles for specific recognition of ochratoxin a. Sens Actuators B Chem 227:668–676. https://doi.org/10.1016/j.snb.2015.12.087CrossRef

24.

Yan Z, Fang GZ (2019) Molecularly imprinted polymer based on upconversion nanoparticles for highly selective and sensitive determination of ochratoxin a. J Cent South Univ 26:515–523. https://doi.org/10.1007/s11771-019-4023-9CrossRef

Title: A novel molecularly imprinted polymer material for the recognition of ochratoxin A
Authors: Yulin Wang
Yangyang Li
Yiling Luo
Kailian Zhou
Xiuzhen Qiu
Huishi Guo
Publication date: 01-05-2022
Publisher: Springer Netherlands
Published in: Journal of Polymer Research / Issue 5/2022
Print ISSN: 1022-9760
Electronic ISSN: 1572-8935
DOI: https://doi.org/10.1007/s10965-022-03005-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5/2022

Fabrication of SiO2-reinforced polybenzoxazine composites and their thermal and dielectric properties

Molecularly imprinted polymer on indium tin oxide substrate for bovine serum albumin determination

Synthesis and characterization of bio-based "three sources in one" intumescent flame retardant monomer and the intrinsic flame retardant waterborne polyurethane

Research on super-hydrophobic surface treatment and performance of tennis hand glue

Three-dimensional gradient porous polymeric composites for osteochondral regeneration

Composite callus culture pectin/alginate hydrogel matrices stable in the gastrointestinal environment: physicochemical properties, morphology and swelling behavior

Premium Partners