Top

Rock Mechanics and Rock Engineering

Published in:

15-11-2018 | Original Paper

A Preliminary Fractal Interpretation of Effects of Grain Size and Grain Shape on Rock Strength

Authors: Wenhao He, Asadollah Hayatdavoudi, Huaizhong Shi, Kaustubh Sawant, Pengpeng Huang

Published in: Rock Mechanics and Rock Engineering | Issue 6/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Rock strength is an important consideration to indicate the integrity and stability of wellbore drilling, tunnels, and other underground excavations. In this research, by assuming the rock rain as a 3D spheroid with a 2D ellipse projection area, a fractal model is developed to quantify the rock strength based on the fractal dimensions of grain size and grain aspect ratio. The validity of the modeling is verified using available experimental data. It can well explain the rock strength changes along with the equivalent diameter of grains found in the common igneous rocks, sedimentary rocks and metamorphic rocks, i.e., granite, marble, limestone, and sandstones. A sensitivity analysis indicates a high fractal dimension of grain size leads to a low value of grain size and a fine-grained rock matrix while a high fractal dimension of grain aspect ratio indicates a low value of grain aspect ratio and a high-sphericity rock matrix. The difference between a 2D equivalent diameter and a 3D equivalent diameter is also discussed and is found to diminish under a low fractal dimension of grain size and a low fractal dimension of grain aspect ratio. Those rocks exhibiting high rock strengths tend to be a fine-grained rock matrix with a low value of grain size (i.e., the major length), a small equivalent diameter, a low sphericity, but a high aspect ratio.

previous article Scaling of Fracture Patterns in Three Deep Boreholes and Implications for Constraining Fractal Discrete Fracture Network Models

next article Quantitative Evaluation and Classification Method of the Cataclastic Texture Rock Mass Based on the Structural Plane Network Simulation

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Available only for authorised users

Ajalloeian R, Mansouri H, Baradaran E (2017) Some carbonate rock texture effects on mechanical behavior, based on Koohrang tunnel data, Iran. Bull Eng Geol Env 76(1):295–307CrossRef

Akcin NA, Muftuoglu YV, Bas N (1994) Prediction of drilling performance for electro-hydraulic percussive drills. In: Proceedings of the third international symposium on mine planning and equipment selection, Balkema, Istanbul, Turkey, pp 483–488

Antony SJ, Kuhn MR (2004) Influence of particle shape on granular contact signatures and shear strength: new insights from simulations. Int J Solids Struct 41(21):5863–5870CrossRef

Atapour H, Mortazavi A (2018) The influence of mean grain size on unconfined compressive strength of weakly consolidated reservoir sandstones. J Pet Sci Eng

Billi A (2005) Grain size distribution and thickness of breccia and gouge zones from thin (< 1 m) strike-slip fault cores in limestone. J Struct Geol 27(10):1823–1837CrossRef

Billi A, Storti F (2004) Fractal distribution of particle size in carbonate cataclastic rocks from the core of a regional strike-slip fault zone. Tectonophysics 384(1–4):115–128CrossRef

Billi A, Salvini F, Storti F (2003) The damage zone-fault core transition in carbonate rocks: implications for fault growth, structure and permeability. J Struct Geol 25(11):1779–1794CrossRef

Blenkinsop TG (1991) Cataclasis and processes of particle-size reduction. Pure Appl Geophys 136:59–86CrossRef

Brace WF (1961) Dependence of fracture strength of rocks on grain size. In: Proceedings of the 4th symposium rock mechanics. University Park, USA, pp 99–103

Brace WF (1964) Brittle fracture of rocks. In: State of stress in the earth’s crust. American Elsevier Publishing Co, New York, pp 111–180

Briševac Z, Hrženjak P, Cotman I (2017) Estimate of uniaxial compressive strength and Young’s Modulus of the elasticity of natural Stone Giallo d’Istria. Procedia Eng 191:434–441CrossRef

Buyuksagis IS, Goktan RM (2005) Investigation of marble machining performance using an instrumented block-cutter. J Mat Proc Technol 169:258–262CrossRef

Cheatham JB (1984) Wellbore stability. J Pet Technol 36(06):889–896CrossRef

Cho NA, Martin CD, Sego DC (2007) A clumped particle model for rock. Int J Rock Mech Min Sci 44(7):997–1010CrossRef

Cox MR, Budhu M (2008) A practical approach to grain shape quantification. Eng Geol 96(1–2):1–16CrossRef

Demou SM, Olsan RC, Wingquist CF (1983) Determination of bit forces encountered in hard rock cutting for application to continuous miner design. US Dept of the interior, USBM RI-.8748, p 24

Deng Y, Chen M, Jin Y, Zou D (2016) Theoretical analysis and experimental research on the energy dissipation of rock crushing based on fractal theory. J Nat Gas Sci Eng 33:231–239CrossRef

Dunstan DJ, Bushby AJ (2014) Grain size dependence of the strength of metals: the Hall–Petch effect does not scale as the inverse square root of grain size. Int J Plast 53:56–65. https://doi.org/10.1016/j.ijplas.2013.07.004 CrossRef

Eberhardt E, Stimpson B, Stead D (1999) Effects of grain size on the initiation and propagation thresholds of stress-induced brittle fractures. Rock Mech Rock Eng 32(2):81–99CrossRef

Ersoy A, Atici U (2007) Correlation of P and S-waves with cutting specific energy and dominant properties of volcanic and carbonate rocks. Rock Mech Rock Eng 40(5):491–504CrossRef

Ersoy A, Waller MD (1995) Prediction of drill-bit performance using multi-variable linear regression analysis. Inst Min Metall (Sect A Min Ind) 104:A101

Fahy MP, Guccione MJ (1979) Estimating strength of sandstone using petrographic thin-section data. Bull Assoc Eng Geol 16(4):467–485

Fredrich JT, Evans B, Wong TF (1991) Effect of grain size on brittle and semibrittle strength: implications for micromechanical modelling of failure in compression. J Geophys Res 95(7):10907–10920

Gori U, Mari M (2001) The correlation between the fractal dimension and internal friction angle of different granular materials. Soils Found 41(6):17–23CrossRef

Griffith AA (1920) The phenomena of rupture and flow in solids. Philos Trans R Soc Lond Ser A Math Phys Sci 221(587):163–198

Härtl J, Ooi JY (2011) Numerical investigation of particle shape and particle friction on limiting bulk friction in direct shear tests and comparison with experiments. Powder Technol 212(1):231–239CrossRef

Hatzor YH, Palchik V (1997) The influence of grain size and porosity on crack initiation stress and critical flaw length in dolomites. Int J Rock Mech Min Sci 34(5):805–816CrossRef

He W, Hayatdavoudi AA (2018) A comprehensive analysis of fracture initiation and propagation in sandstones based on micro-level observation and digital imaging correlation. J Petrol Sci Eng 164:75–86CrossRef

Heilbronner R, Keulen N (2006) Grain size and grain shape analysis of fault rocks. Tectonophysics 427(1–4):199–216CrossRef

Hugman III, Friedman RHH, M (1979) Effects of texture and composition on mechanical behavior of experimentally deformed carbonate rocks. AAPG Bull 63(9):1478–1489

Jennings M (1989) Guidelines for sawing stone. Ind Diamond Rev 49:70–75

Ju Y, Zheng J, Epstein M, Sudak L, Wang J, Zhao X (2014) 3D numerical reconstruction of well-connected porous structure of rock using fractal algorithms. Comput Methods Appl Mech Eng 279(9):212–226CrossRef

Kabeya KK, Legge TFH (1997) Relationship between grain size and some surface roughness parameters of rock joints. Int J Rock Mech Min Sci 34(3–4):146–151

Kahraman S, Fener M, Kozman E (2012) Predicting the compressive and tensile strength of rocks from indentation hardness index. J South Afr Inst Min Metall 112(5):331–339

Kılıç A, Teymen A (2008) Determination of mechanical properties of rocks using simple methods. Bull Eng Geol Environ 67(2):237CrossRef

Koncagül EC, Santi PM (1999) Predicting the unconfined compressive strength of the Breathitt shale using slake durability, Shore hardness and rock structural properties. Int J Rock Mech Min Sci 36(2):139–153CrossRef

Koyama T, Jing L (2007) Effects of model scale and particle size on micro-mechanical properties and failure processes of rocks—a particle mechanics approach. Eng Anal Bound Elem 31(5):458–472CrossRef

Krerch WW, Henderson FA, Hjelmstad KE (1974) A standard rock suite for rapid excavation research. US Dept of the interior, USBM RI 7865, p 29

Kruhl JH (2013) Fractal-geometry techniques in the quantification of complex rock structures: a special view on scaling regimes, inhomogeneity and anisotropy. J Struct Geol 46:2–21CrossRef

Majumdar A, Bhushan B (1990) Role of fractal geometry in roughness characterization and contact mechanics of surfaces. J Tribol 112(2):205–216CrossRef

Mandelbrot B (1967) How long is the coast of Britain? Statistical self-similarity and fractional dimension. Science 156(3775):636–638CrossRef

Matsui K, Shimada H (1993) Rock impact hardness index for predicting cuttability of roadheader. Proc Mine Mech Autom 1993:265–270

Mcfeat-Smith I, Fowell RI (1977) Correlation of rock properties and the cutting performance of tunnelling machines. In: Proceedings of a conference on rock engineering, Newcastle Upon Tyne, England, pp 581–602

Meulenkamp F, Grima MA (1999) Application of neural networks for the prediction of the unconfined compressive strength (UCS) from Equotip hardness. Int J Rock Mech Min Sci 36(1):29–39CrossRef

Miao T, Yu B, Duan Y, Fang Q (2015) A fractal analysis of permeability for fractured rocks. Int J Heat Mass Transf 81:75–80CrossRef

Mishra DA, Basu A (2012) Use of the block punch test to predict the compressive and tensile strengths of rocks. Int J Rock Mech Min Sci 51:119–127CrossRef

Moore RB (1984) us geological survey professional paper (No. 1660). US Government Printing Office

Nazir R, Momeni E, Armaghani DJ, Amin MM (2013) Correlation between unconfined compressive strength and indirect tensile strength of limestone rock samples. Electron J Geotech Eng 18(1):1737–1746

Olsson WA (1974) Grain size dependence of yield stress in marble. J Geophys Res 79(32):4859–4862CrossRef

Palchik V (1999) Influence of porosity and elastic modulus on uniaxial compressive strength in soft brittle porous sandstones. Rock Mech Rock Eng 32(4):303–309CrossRef

Park JW, Song JJ (2009) Numerical simulation of a direct shear test on a rock joint using a bonded-particle model. Int J Rock Mech Min Sci 46(8):1315–1328CrossRef

Potyondy DO, Cundall PA (2004) A bonded-particle model for rock. Int J Rock Mech Min Sci 41(8):1329–1364CrossRef

Přikryl R (2001) Some microstructural aspects of strength variation in rocks. Int J Rock Mech Min Sci 38(5):671–682CrossRef

Reddish DJ, Yasar E (1996) A new portable rock strength index test based on specific energy of drilling. Int J Rock Mech Min Sci Geomech Abstr 33(5):543–548CrossRef

Rong G, Liu G, Hou D, Zhou CB (2013) Effect of particle shape on mechanical behaviors of rocks: a numerical study using clumped particle model. Sci World J 2013:2013

Roxborough FF, Phillips HR (1981) Applied rock and coal cutting mechanics. Workshop course 156/81. Australian Mineral Foundation, Adelaide

Schäfer A, Teyssen T (1987) Size, shape and orientation of grains in sands and sandstones—image analysis applied to rock thin-sections. Sed Geol 52(3–4):251–271CrossRef

Schmidt RL (1972) Drillability studies—percussive drilling in the field. US Dept of the interior, USBM RI-7684, p 31

Shakoor A, Bonelli RE (1991) Relationship between petrographic characteristics, engineering index properties, and mechanical properties of selected sandstones. Bull Assoc Eng Geol 28(1):55–71

Shao S, Wasantha PLP, Ranjith PG, Chen BK (2014) Effect of cooling rate on the mechanical behavior of heated Strathbogie granite with different grain sizes. Int J Rock Mech Min Sci 70:381–387CrossRef

Shinohara K, Oida M, Golman B (2000) Effect of particle shape on angle of internal friction by triaxial compression test. Powder Technol 107(1–2):131–136CrossRef

Singh SK (1988) Relationship among fatigue strength, mean grain size and compressive strength of a rock. Rock Mech Rock Eng 21(4):271–276CrossRef

Skinner WJ (1959) Experiments on the compressive strength of anhydrite. Engineer 207(255–259):288–292

Suorineni FT, Chinnasane DR, Kaiser PK (2009) A procedure for determining rock-type specific Hoek–Brown brittle parameters. Rock Mech Rock Eng 42(6):849–881CrossRef

Tecen O, Fowell RJ (1983) Hybrid rock cutting: fundamental investigations and practical applications. In: Summer DA, Haston FF (eds) Proceedings of the second US water jet conference, Rolla-Missouri, pp 368–380

Ting JM, Meachum L, Rowell JD (1995) Effect of particle shape on the strength and deformation mechanisms of ellipse-shaped granular assemblages. Eng Comput 12(2):99–108CrossRef

Tiryaki B (2006) Evaluation of the indirect measures of rock brittleness and fracture toughness in rock cutting. J S Afr Inst Min Metall 106:1–18

Tumac D, Bilgin N, Feridunoglu C, Ergin H (2007) Estimation of rock cuttability from Shore Hardness and compressive strength properties. Rock Mech Rock Eng 40(5):477–490CrossRef

Turcotte DL (1986) Fractals and fragmentation. J Geophys Res 91:1921–1928CrossRef

Vallejo LE, Zhou Y (1995) Fractal approach to measuring roughness of geomembranes. J Geotech Eng 121(5):442–446CrossRef

Wong RHC, Chau KT, Wang P (1996) Microcracking and grain size effect in Yuen Long marbles. Int J Rock Mech Min Sci Geomech Abstr 33(5):479–485CrossRef

Yilmaz Gunes N, Karaca Z, Goktan RM, Akal C (2009) Relative brittleness characterization of some selected granitic building stones: influence of mineral grain size. Constr Build Mater 23(1):370–375CrossRef

Yu B, Li J (2001) Some fractal characters of porous media. Fractals 9(03):365–372CrossRef

Yu Q, Zhu W, Ranjith PG, Shao S (2018) Numerical simulation and interpretation of the grain size effect on rock strength. Geomech Geophys Geo-Energy Geo-Resour 4(2):157–173CrossRef

Yusof NQ, Zabidi H (2016) Correlation of mineralogical and textural characteristics with engineering properties of granitic rock from Hulu Langat, Selangor. Procedia Chem 19:975–980CrossRef

Title: A Preliminary Fractal Interpretation of Effects of Grain Size and Grain Shape on Rock Strength
Authors: Wenhao He
Asadollah Hayatdavoudi
Huaizhong Shi
Kaustubh Sawant
Pengpeng Huang
Publication date: 15-11-2018
Publisher: Springer Vienna
Published in: Rock Mechanics and Rock Engineering / Issue 6/2019
Print ISSN: 0723-2632
Electronic ISSN: 1434-453X
DOI: https://doi.org/10.1007/s00603-018-1645-4

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 6/2019

Mesoscopic Crack Initiation, Propagation, and Coalescence Mechanisms of Coal Under Shear Loading

Evaluating a Simple Fracturing Criterion for a Hydraulic Fracture Crossing Stress and Stiffness Contrasts

Investigating the behaviour of fibre reinforced polymers and steel mesh when supporting coal mine roof strata subject to buckling

Scaling of Fracture Patterns in Three Deep Boreholes and Implications for Constraining Fractal Discrete Fracture Network Models

Hydraulic and Mechanical Responses of Porous Sandstone During Pore Pressure-Induced Reactivation of Fracture Planes: An Experimental Study

Modelling Hydraulic Fracturing with a Point-Based Approximation for the Maximum Principal Stress Criterion