Skip to main content
Top
Published in: Clean Technologies and Environmental Policy 1/2013

01-02-2013 | Original Paper

A property-integration approach to solvent screening and conceptual design of solvent-extraction systems for recycling used lubricating oils

Authors: Houssein A. Kheireddine, Mahmoud M. El-Halwagi, Nimir O. Elbashir

Published in: Clean Technologies and Environmental Policy | Issue 1/2013

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The significant quantities of used and discharged lubricating oils pose a major environmental problem around the world. Recently, there has been a growing interest in the sustainable usage of lubricating oils by adopting recovery, recycle, and reuse strategies. In this study, a property-integration framework is used in the optimization of solvent selection for re-refining of used lubricating oils. Property-integration tools are employed for the systematic screening of solvents and solvent blends. The proposed approach identifies the main physical properties that influence the performance of solvent(s) while extracting additives and contaminants from used lubricating oils (i.e., solubility parameter (δ), viscosity (v), and vapor pressure (p)). To identify a feasibility region for an effective solvent or solvent blend for this process, we construct a ternary diagram utilizing the property-clustering technique. The results of the theoretical approach are validated through comparison between experimental data for single solvents and for solvent blends.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
go back to reference Barton AFM (1991) Handbook of solubility parameters and other cohesion parameters, 2nd edn. CRC Press, Boca Raton Barton AFM (1991) Handbook of solubility parameters and other cohesion parameters, 2nd edn. CRC Press, Boca Raton
go back to reference Burke J (1984) Solubility parameters: theory and application the American institute for conservation. The Book and Paper Group Annual, vol 3. The Oakland Museum of California, Oakland Burke J (1984) Solubility parameters: theory and application the American institute for conservation. The Book and Paper Group Annual, vol 3. The Oakland Museum of California, Oakland
go back to reference Chemmangattuvalappil NG, Solvason CC, Bommareddy S, Eden MR (2010) Combined property clustering and GC+ techniques for process and product design. Comput Chem Eng 34:582–591CrossRef Chemmangattuvalappil NG, Solvason CC, Bommareddy S, Eden MR (2010) Combined property clustering and GC+ techniques for process and product design. Comput Chem Eng 34:582–591CrossRef
go back to reference Chen C-L, Lee J-Y, Ng DKS, Foo DCY (2010) A unified model of property integration for batch and continuous processes. AIChE J 56(7):1845–1858CrossRef Chen C-L, Lee J-Y, Ng DKS, Foo DCY (2010) A unified model of property integration for batch and continuous processes. AIChE J 56(7):1845–1858CrossRef
go back to reference Elbashir NO, Al-Zahrani SM, Abdul Mutalib MI, Abasaeed AE (2002) A method of predicting effective solvent extraction parameters for recycling used oils. Chem Eng Process 41(9):765–769CrossRef Elbashir NO, Al-Zahrani SM, Abdul Mutalib MI, Abasaeed AE (2002) A method of predicting effective solvent extraction parameters for recycling used oils. Chem Eng Process 41(9):765–769CrossRef
go back to reference El-Halwagi MM (2006) Process integration, vol 7. Academic Press/Elsevier, San Diego El-Halwagi MM (2006) Process integration, vol 7. Academic Press/Elsevier, San Diego
go back to reference El-Halwagi MM, Glaswog IM, Qin X, Eden MR (2004) Property integration: componentless design techniques and visualization tools. AIChE J 50(8):1854–1869CrossRef El-Halwagi MM, Glaswog IM, Qin X, Eden MR (2004) Property integration: componentless design techniques and visualization tools. AIChE J 50(8):1854–1869CrossRef
go back to reference Eljack FT, Eden MR (2008) A visual approach to molecular design using property clusters and group contribution. Comput Chem Eng 32(12):3002–3010CrossRef Eljack FT, Eden MR (2008) A visual approach to molecular design using property clusters and group contribution. Comput Chem Eng 32(12):3002–3010CrossRef
go back to reference Eljack FT, Eden MR, Kazantzi V, El-Halwagi MM (2007) Simultaneous solution of process and molecular design problems via group contribution and property clustering techniques. AIChE J 53(5):1232–1239CrossRef Eljack FT, Eden MR, Kazantzi V, El-Halwagi MM (2007) Simultaneous solution of process and molecular design problems via group contribution and property clustering techniques. AIChE J 53(5):1232–1239CrossRef
go back to reference Fletche LC, Beard BJ, O’Blasny R (1982) Distilation and solvent extraction process for rerefining used lubrication oil. US Patent 4,360,420, 23 Nov 1982 Fletche LC, Beard BJ, O’Blasny R (1982) Distilation and solvent extraction process for rerefining used lubrication oil. US Patent 4,360,420, 23 Nov 1982
go back to reference Kamal A, Khan F (2009) Effect of extraction and adsorption on re-refining of used lubricating oil. Oil & Gas Sci Technol-Rev.IFP 64(2):191–197 Kamal A, Khan F (2009) Effect of extraction and adsorption on re-refining of used lubricating oil. Oil & Gas Sci Technol-Rev.IFP 64(2):191–197
go back to reference Kazantzi V, Qin X, El-Halwagi MM, Eljack FT, Eden MR (2007) Simultaneous process and molecular design through property clustering techniques: a visualization tool. Ind Eng Chem Res 46(10):3400–3409CrossRef Kazantzi V, Qin X, El-Halwagi MM, Eljack FT, Eden MR (2007) Simultaneous process and molecular design through property clustering techniques: a visualization tool. Ind Eng Chem Res 46(10):3400–3409CrossRef
go back to reference King CJ (1971) Separation processes. McGraw-Hill, New York King CJ (1971) Separation processes. McGraw-Hill, New York
go back to reference Kopeliovitch D (2011) Additives in lubricating oils. Subst Tech. Retrieved August 15 Kopeliovitch D (2011) Additives in lubricating oils. Subst Tech. Retrieved August 15
go back to reference Nápoles-Rivera F, Ponce-Ortega JM, El-Halwagi MM, Jiménez-Gutiérrez A (2010) Global optimization of mass and property integration networks with in-plant property interceptors. Chem Eng Sci 65(15):4363–4377CrossRef Nápoles-Rivera F, Ponce-Ortega JM, El-Halwagi MM, Jiménez-Gutiérrez A (2010) Global optimization of mass and property integration networks with in-plant property interceptors. Chem Eng Sci 65(15):4363–4377CrossRef
go back to reference Ng DKS, Foo DCY, Tan RR, Pau CH, Tan YL (2009) Automated targeting for conventional and bilateral property-based resource conservation network. Chem Eng J 149:87–101CrossRef Ng DKS, Foo DCY, Tan RR, Pau CH, Tan YL (2009) Automated targeting for conventional and bilateral property-based resource conservation network. Chem Eng J 149:87–101CrossRef
go back to reference Ponce-Ortega JM, Hourtua AC, El-Halwagi MM, Jiménez-Gutiérrez A (2009) A property-based optimization of direct recycle networks and wastewater treatment processes. AIChE J 55(9):2329–2344CrossRef Ponce-Ortega JM, Hourtua AC, El-Halwagi MM, Jiménez-Gutiérrez A (2009) A property-based optimization of direct recycle networks and wastewater treatment processes. AIChE J 55(9):2329–2344CrossRef
go back to reference Ponce-Ortega JM, El-Halwagi MM, Jiménez-Gutiérrez A (2010) Global optimization for the synthesis of property-based recycle and reuse networks including environmental constraints. Comp Chem Eng 34(3):318–330CrossRef Ponce-Ortega JM, El-Halwagi MM, Jiménez-Gutiérrez A (2010) Global optimization for the synthesis of property-based recycle and reuse networks including environmental constraints. Comp Chem Eng 34(3):318–330CrossRef
go back to reference Qin X, Gabriel F, Harell D, El-Halwagi M (2004) Algebraic techniques for property integration via componentless design. Ind Eng Chem 43:3792–3798CrossRef Qin X, Gabriel F, Harell D, El-Halwagi M (2004) Algebraic techniques for property integration via componentless design. Ind Eng Chem 43:3792–3798CrossRef
go back to reference Reis MA, Jeronimo MS (1982) Fabrico de Tinta de Base Para Fabrico de Tinta de Impressao a Partir de Oleos Usados. Portuguese Patent 75702 Reis MA, Jeronimo MS (1982) Fabrico de Tinta de Base Para Fabrico de Tinta de Impressao a Partir de Oleos Usados. Portuguese Patent 75702
go back to reference Reis MA, Jeronimo MS (1988) Waste lubricating oil re-refining by extraction-flocculation. 1. A scientific basis to design efficient solvents. Ind Eng Chem Res 27(7):1222–1228CrossRef Reis MA, Jeronimo MS (1988) Waste lubricating oil re-refining by extraction-flocculation. 1. A scientific basis to design efficient solvents. Ind Eng Chem Res 27(7):1222–1228CrossRef
go back to reference Reis MA, Jernimo MS (1989) Waste lubricating oil rerefining by extraction-flocculation 2. A method to formulate efficient composite solvents. Ind Eng Chem Res 29:432–436CrossRef Reis MA, Jernimo MS (1989) Waste lubricating oil rerefining by extraction-flocculation 2. A method to formulate efficient composite solvents. Ind Eng Chem Res 29:432–436CrossRef
go back to reference Rincon J, Canizares P, Garcia MT (2005) Regeneration of used lubricant oil by polar solvent extraction. Ind Eng Chem Res 44:4373–4379 Rincon J, Canizares P, Garcia MT (2005) Regeneration of used lubricant oil by polar solvent extraction. Ind Eng Chem Res 44:4373–4379
go back to reference Shelley MD, El-Halwagi MM (2000) Component-less design of recovery and allocation systemas: a functionality-based clustering approach. Comput Chem Eng 24(9–10):2081–2091CrossRef Shelley MD, El-Halwagi MM (2000) Component-less design of recovery and allocation systemas: a functionality-based clustering approach. Comput Chem Eng 24(9–10):2081–2091CrossRef
go back to reference Solvason CC, Chemmangattuvalappil NG, Eden MR (2009) Decomposition techniques for molecular synthesis and structured product design. Comput Aided Chem Eng 26:153–158CrossRef Solvason CC, Chemmangattuvalappil NG, Eden MR (2009) Decomposition techniques for molecular synthesis and structured product design. Comput Aided Chem Eng 26:153–158CrossRef
go back to reference Wagialla KM, Ponce-Ortega JM, El-Halwagi MM (2012) An integrated approach to the optimization of in-plant wastewater interception with mass and property constraints. Clean Tech Environ Policy 14(2):257–265. doi:10.1007/s10098-011-0395-8 CrossRef Wagialla KM, Ponce-Ortega JM, El-Halwagi MM (2012) An integrated approach to the optimization of in-plant wastewater interception with mass and property constraints. Clean Tech Environ Policy 14(2):257–265. doi:10.​1007/​s10098-011-0395-8 CrossRef
Metadata
Title
A property-integration approach to solvent screening and conceptual design of solvent-extraction systems for recycling used lubricating oils
Authors
Houssein A. Kheireddine
Mahmoud M. El-Halwagi
Nimir O. Elbashir
Publication date
01-02-2013
Publisher
Springer-Verlag
Published in
Clean Technologies and Environmental Policy / Issue 1/2013
Print ISSN: 1618-954X
Electronic ISSN: 1618-9558
DOI
https://doi.org/10.1007/s10098-012-0482-5

Other articles of this Issue 1/2013

Clean Technologies and Environmental Policy 1/2013 Go to the issue