Top

Microsystem Technologies

Published in:

02-04-2018 | Technical Paper

A series expansion method aided design of CCII controller for a TITO system

Authors: Vijay Kumar Verma, Rajeev Kumar Ranjan, Pooja Gupta, Bindu Priyadarshini, Vijay Nath

Published in: Microsystem Technologies | Issue 9/2018

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Current mode circuits have attracted the attention of the design engineers due to their unique characteristics that are not found in their voltage mode counterparts. This article presents a series expansion method based design of current mode circuits for the control of a two input two output (TITO) system. The unique contribution of this work is the realization of the TITO controller using the second generation current conveyor circuits. The controller was practically implemented using AD844 integrated circuits. Simulation and the experimental results are presented for a pragmatic case study to demonstrate the efficacy of the proposed design methodology.

previous article A novel RF MEMS switch on frequency reconfigurable antenna application

next article Design of a biaxial high frequency-ratio low-g MEMS accelerometer

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Abdullah Y, Kacar F (2017) Band-pass filter with high quality factor based on current differencing transconductance amplifier and current amplifier. AEU Int J Electron Commun. http://dx.doi.org/10.1016/j.aeue.2017.03.007

Abuelma’atti Muhammad Taher (1994) Current-mode multiphase oscillator using current followers. Microelectron J 25(6):457–461. https://doi.org/10.1016/0026-2692(94)90071-X CrossRef

ACAR CEATC (2000) Current conveyor based proportional-integral-derivative (PID) controller and calculating optimum parameter tolerances. In: International conference on optimization of electrical and electronic equipments

Aronhime P (1974) Transfer-function synthesis using a current conveyor. IEEE Trans Circuits Syst 21(2):312–313. https://doi.org/10.1109/TCS.1974.1083818 CrossRef

Chunhua W et al (2011) A new current-mode current-controlled SIMO-type universal filter. AEU Int J Electron Commun 65(3):231–234. https://doi.org/10.1016/j.aeue.2010.02.010 CrossRef

El-Adawy AA, Ahmed MS, Hassan OE (2002) Low voltage digitally controlled CMOS current conveyor. AEU Int J Electron Commun 56(3):137–144. https://doi.org/10.1078/1434-8411-54100086 CrossRef

Erdal C, Kuntman H, Kafali S (2004) A current controlled conveyor based proportional-integral-derivative (PID) controller. J Electr Electron Eng 4(2):1248–1248. http://www.journals.istanbul.edu.tr/iujeee/article/view/1023011499/0

Guo L, Songyin C (2014) Anti-disturbance control theory for systems with multiple disturbances: a survey. ISA Trans 53(4):846–849. https://doi.org/10.1016/j.isatra.2013.10.005 CrossRef

Hwang C, Yen-Ping S, Rong-Yuang W (1997) An efficient FFT-based algorithm for power series expansions. Comput Chem Eng 21(9):1043–1049. https://doi.org/10.1016/S0098-1354(97)83146-8 CrossRef

Katsuhiko O (1999) Modern control engineering. Book Rev 35:1181–1184

Kuo BC (1997) Automatic control systems. Prentice-Hall, Upper Saddle River

Maghade DK, Patre BM (2012) Decentralized PI/PID controllers based on gain and phase margin specifications for TITO processes. ISA Trans 51(4):550–558. https://doi.org/10.1016/j.isatra.2012.02.006 CrossRef

Pandey N, Nand D, Khan Z (2013) Single-input four-output current mode filter using operational floating current conveyor. Active Passive Electron Compon. https://doi.org/10.1155/2013/318560

Patranabis D, Ghosh D (1984) Integrators and differentiators with current conveyors. IEEE Trans Circuits Syst 31(6):567–569. https://doi.org/10.1109/TCS.1984.1085535 CrossRef

Ranjan RK, Choubey CK, Nagar BC, Paul SK (2016) Comb filter for elimination of unwanted power line interference in biomedical signal. J Circuits Syst Comput 25(06):1650052. https://doi.org/10.1142/S0218126616500523 CrossRef

Safari L, Minaei S (2016) A simple low voltage, high output impedance resistor based current mirror with extremely low input and output voltage requirements. In: 39th International conference on telecommunications and signal processing (TSP). IEEE. https://doi.org/10.1109/TSP.2016.7760872

Sedra AS (1989) The current conveyor: history and progress. IEEE international symposium on circuits and systems. https://doi.org/10.1109/ISCAS.1989.100659

Sedra A, Smith K (1970) A second-generation current conveyor and its applications. IEEE Trans Circuit Theory 17(1):132–134. https://doi.org/10.1109/TCT.1970.1083067 CrossRef

Tavakoli S, Griffin I, Fleming PJ (2006) Tuning of decentralized PI (PID) controllers for TITO processes. Control Eng Pract 14(9):1069–1080. https://doi.org/10.1016/j.conengprac.2005.06.006 CrossRef

Tek H, Anday FUAT (1989) Voltage transfer function synthesis using current conveyors. Electron Lett 25:1552–1553. https://doi.org/10.1049/el:1989104 CrossRef

Toumazou C, Lidgey FJ, Haigh DG (1990) Analogue IC design: the current mode approach. IEE Circuits and Systems Series 2. Peter Peregrinus Ltd.

Wang QG, Huang B, Guo X (2000) Auto-tuning of TITO decoupling controllers from step tests. ISA Trans 39(4):407–418. https://doi.org/10.1016/S0019-0578(00)00028-8 CrossRef

Wilson B (1990) Recent developments in current conveyors and current-mode circuits. IEE Proc G Circuits Devices Syst 137(2):63–77. https://doi.org/10.1049/ip-g-2.1990.0014 CrossRef

Worapong T, Dumawipata T, Surakampontorn W (2007) Multiple-input single-output current-mode multifunction filter using current differencing transconductance amplifiers. AEU-Int J Electron Commun 61(4):209–214. https://doi.org/10.1016/j.aeue.2006.04.004 CrossRef

Worapong T, Tanjaroen W, Pukkalanun T (2009) Current-mode multiphase sinusoidal oscillator using CDTA-based all pass sections. AEU-Int J Electron Commun 63(7):616–622. https://doi.org/10.1016/j.aeue.2008.05.001 CrossRef

Zhuang M, Atherton DP (1994) PID controller design for a TITO system. IEE Proc Control Theory Appl 141(2):111–120. http://ieeexplore.ieee.org/document/4793493/

Title: A series expansion method aided design of CCII controller for a TITO system
Authors: Vijay Kumar Verma
Rajeev Kumar Ranjan
Pooja Gupta
Bindu Priyadarshini
Vijay Nath
Publication date: 02-04-2018
Publisher: Springer Berlin Heidelberg
Published in: Microsystem Technologies / Issue 9/2018
Print ISSN: 0946-7076
Electronic ISSN: 1432-1858
DOI: https://doi.org/10.1007/s00542-018-3869-3

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 9/2018

Resonance frequencies of size dependent perforated nonlocal nanobeam

Nafion coated flexible bismuth sensor for trace lead and cadmium determination

Facile and fast electrospinning of crystalline ZnO 3D interconnected nanoporous nanofibers for ammonia sensing application

Performance analysis of MEMS sensor for the detection of cholera and diarrhea

Plasmonic op-amp circuit model using the inline successive microring pumping technique

Development of a microcontroller-based adaptive fuzzy controller for a two-wheeled self-balancing robot