Top

The International Journal of Advanced Manufacturing Technology

Published in:

05-07-2022 | Critical Review

A short review on machining deformation control of aero-engine thin-walled casings

Authors: Xin Wang, Biao Zhao, Wenfeng Ding, Changlan Pu, Xingchao Wang, Shengyao Peng, Fangwei Ma

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2022

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This paper presents a comprehensive review on the types of machining deformation and mechanism analysis, as well as the machining deformation control methods of aero-engine thin-walled casings. The different types of machining deformation (e.g. deformation caused by positioning and clamping process, cutting forces, residual stress, and chatter) of thin-walled casings are introduced, and the corresponding deformation mechanism of each type is discussed in the first part. Subsequently, the research progress and academic achievements are summarised in terms of the prediction and control of cutting deformation, dynamic modelling and chatter suppression, and adaptive machining and error control in the field of machining deformation control of thin-walled casings. Then, the specific machining deformation control methods, including cutting force prediction, reduction of residual stress, dynamics modelling, chatter suppression, adaptive machining, and error compensation, are explored in detail. Finally, this review implies the existing challenges and future developing tendencies to control the machining deformation of thin-walled casings.

previous article The state of the art of electrical discharge drilling: a review

next article Piecewise modeling and compensation of geometric errors in five-axis machine tools by local product of exponentials formula

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Bi C, Fang JG, Li K, Guo ZJ (2017) Extrinsic calibration of a laser displacement sensor in a non-contact coordinate measuring machine. Chin J Aeronaut 30:1528–1537. https://doi.org/10.1016/j.cja.2017.04.016CrossRef

Kang H, Li ZM (2020) Assembly research of aero-engine casing involving bolted connection based on rigid-compliant coupling assembly deviation modeling. Proc Inst Mech Eng Part C J Mech Eng Sci 234:2803–2820. https://doi.org/10.1177/0954406220910455CrossRef

Bi C, Zhang LP, Dong P, Hao X (2019) Study on measuring method of radial geometrical deformation of the fixture fringe of casing. Appl Opt Photonics China 11338:113380T. https://doi.org/10.1117/12.2542407CrossRef

Li D, Hu CH, Tan BN, Lei WM, Tang CC (2019) An aeroengine measurement system based on high-precision turntable. Appl Opt Photonics China 11336:113360S. https://doi.org/10.1117/12.2547928CrossRef

Yang SY, Chen C, Liu GW (2018) An experimental and simulation study of impact resistance in sandwich structures casing. Proc Inst Mech Eng Part G J Aerosp Eng 233:3635–3648. https://doi.org/10.1177/0954410018806807CrossRef

Zhou N, Liu X (2018) Feature-based automatic NC programming for aero-engine casings. Proc Inst Mech Eng Part B J Eng Manuf 233:1289–1301. https://doi.org/10.1177/0954405418769949CrossRef

Kang HH, Li ZM, Liu T, Qiao PZ (2021) Tolerance design of multistage aero-engine casing assembly by vibration characteristic evaluation. J Aerosp Eng 34:04021064. https://doi.org/10.1061/(asce)as.1943-5525.0001323CrossRef

Panigrahi SK, Sarangi N, Chandrasekhar U (2016) Experimental evaluation of overload capability of an annular combustor casing of a gas turbine engine. Exp Tech 40:841–848. https://doi.org/10.1007/s40799-016-0083-zCrossRef

Gonzalo O, Seara JM, Guruceta E, Izpizuaa A, Espartab M, Zamakonab I, Utergab N, Aranburuc A, Thoelend J (2017) A method to minimize the workpiece deformation using a concept of intelligent fixture. Robot Comput Integr Manuf 48:209–218. https://doi.org/10.1016/j.rcim.2017.04.005CrossRef

10.

Chai SL, Ouyang LH, Bi QZ, Yu JH, Zhang Y (2021) An adaptive fixture for suppress vibrations and measuring workpiece deformation of thin-walled casings. Procedia CIRP 101:322–325. https://doi.org/10.1016/j.procir.2020.05.269CrossRef

11.

Möhring HC, Wiederkehr P (2016) Intelligent fixtures for high performance machining. Procedia CIRP 46:383–390. https://doi.org/10.1016/j.procir.2016.04.042CrossRef

12.

Sabesan R, Leen SB, Hyde TH (2003) Simplified method to predict elastic-plastic behaviour of aeroengine casings. Key Eng Mater 245–246:373–380. https://doi.org/10.4028/www.scientific.net/kem.245-246.373CrossRef

13.

Rajaratnam S, Hyde TH, Leen SB (2006) Characterisation of a simplified aeroengine casing subjected to a radial loading condition using Fe and approximate methods. Eng Syst Des Anal 4:25–33

14.

Huang DW, Liu CF, Zhang XY, Qi MJ, Rao ZX, Yan XJ (2018) Fatigue test method on full-scale aeroengine turbine casing. AIAA/ASCE/AHS/ASC Struct Struct Dyn Mater Conf 2018:1629–1636. https://doi.org/10.2514/6.2018-1995CrossRef

15.

Zhang J, Jie ZQ, Huang TW, Yang WC, Liu L, Fu ZH (2019) Research and development of equiaxed grain solidification and forming technology for nickel-based cast superalloys. Acta Metall Sin 55:1145–1159. https://doi.org/10.11900/0412.1961.2019.00088 (In Chinese)CrossRef

16.

Cai JM, Cao CX (2014) Alloy design and application expectation of a new generation 600 °C high temperature titanium alloy. J Aeronaut Mater 34:27–36. https://doi.org/10.11868/j.issn.1005-5053.2014.4.002 (In Chinese)CrossRef

17.

Turner R, Huang JL, Ward M, Villa M, Reed RC (2013) On the modelling of a pulsed TIG weld process in a nickel superalloy. Mater Sci Forum 762:531–537. https://doi.org/10.4028/www.scientific.net/MSF.762.531CrossRef

18.

Ezugwu EO, Bonney J, Yamane Y (2003) An overview of the machinability of aeroengine alloys. J Mater Process Technol 134:233–253. https://doi.org/10.1016/S0924-0136(02)01042-7CrossRef

19.

Feng C, Duan SJ (2020) Development and performance of heat insulation coatings for hot rolling of titanium alloy and superalloy rings. Procedia Manuf 50:735–738. https://doi.org/10.1016/j.promfg.2020.08.132CrossRef

20.

Liu YM, Jiang ZL, Liu WP, Li Z (2012) Rebound deformation of thin part caused by clamping force in end milling. Appl Mech Mater 217–219:1655–1658. https://doi.org/10.4028/www.scientific.net/AMM.217-219.1655CrossRef

21.

Ratchev S, Liu S, Huang W, Becker AA (2006) An advanced FEA based force induced error compensation strategy in milling. Int J Mach Tools Manuf 46:542–551. https://doi.org/10.1016/j.ijmachtools.2005.06.003CrossRef

22.

Huang XM, Sun J, Li JF (2015) Finite element simulation and experimental investigation on the residual stress-related monolithic component deformation. Int J Adv Manuf Technol 77:1035–1041. https://doi.org/10.1007/s00170-014-6533-9CrossRef

23.

Altintas Y, Weck M (2004) Chatter stability of metal cutting and grinding. CIRP Ann Manuf Technol 53:619–642. https://doi.org/10.1016/S0007-8506(07)60032-8CrossRef

24.

Quintana G, Ciurana J (2011) Chatter in machining processes : a review. Int J Mach Tools Manuf 51:363–376. https://doi.org/10.1016/j.ijmachtools.2011.01.001CrossRef

25.

Zhou X, Luo M, Zhang DH, Liu WZ (2016) Cutting force prediction in four-axis milling of curved surfaces with bull-nose end mill. Procedia CIRP 56:100–104. https://doi.org/10.1016/j.procir.2016.10.027CrossRef

26.

Wang ZB, Sun JF, Chen WY, Liu LB, Wang RQ (2018) Machining distortion of titanium alloys aero engine case based on the energy principles. Metals 8:464. https://doi.org/10.3390/met8060464CrossRef

27.

Zhou X, Zhang DH, Luo M, Wu BH (2015) Chatter stability prediction in four-axis milling of aero-engine casings with bull-nose end mill. Chin J Aeronaut 28:1766–1773. https://doi.org/10.1016/j.cja.2015.06.001CrossRef

28.

Kolluru K, Axinte D, Becker A (2013) A solution for minimising vibrations in milling of thin walled casings by applying dampers to workpiece surface. CIRP Ann Manuf Technol 62:415–418. https://doi.org/10.1016/j.cirp.2013.03.136CrossRef

29.

Wang YT, Wang D, Zhang SZ, Tang ZH, Wang LP, Liu YM (2021) Design and development of a five-axis machine tool with high accuracy, stiffness and efficiency for aero-engine casing manufacturing. Chin J Aeronaut. https://doi.org/10.1016/j.cja.2021.04.001CrossRef

30.

Ratchev S, Liu S, Becker AA (2005) Error compensation strategy in milling flexible thin-wall parts. J Mater Process Technol 163:673–681. https://doi.org/10.1016/j.jmatprotec.2005.02.192CrossRef

31.

Wu NH, Chan KC, Leong SS (1997) Static interactions of surface contacts in a fixture-workpiece system. Int J Comput Appl Technol 10:133–151. https://doi.org/10.1504/IJCAT.1997.062244CrossRef

32.

Liu G (2009) Study on deformation of titanium thin-walled. J Mater Process Technol 209:2788–2793. https://doi.org/10.1016/j.jmatprotec.2008.06.029CrossRef

33.

Zhang J, Lin B, Fei JX, Huang T, Xiao JL, Zhang XF, Ji CH (2018) Modeling and experimental validation for surface error caused by axail cutting force in end-milling process. Int J Adv Manuf Technol 99:327–335. https://doi.org/10.1007/s00170-018-2468-xCrossRef

34.

Cho MW, Seo TI, Kwon HD (2003) Integrated error compensation method using OMM system for profile milling operation. J Mater Process Technol 136:88–99. https://doi.org/10.1016/S0924-0136(02)00943-3CrossRef

35.

Dépincé P, Hascoët JY (2006) Active integration of tool deflection effects in end milling. Part 1. Prediction of milled surfaces. Int J Mach Tools Manuf 46:937–944. https://doi.org/10.1016/j.ijmachtools.2005.08.005CrossRef

36.

Wang ZJ, Chen WY, Zhang YD, Chen ZT, Liu Q (2005) Study on the machining distortion of thin walled part caused by redistribution of residual stress. Chin J Aeronaut 18:175–179. https://doi.org/10.1016/S1000-9361(11)60325-7CrossRef

37.

Yang YF, Xia L, Zhao GL, Meng LH, He N (2018) Investigation of the coupled distribution of initial and machining-induced residual stress on the surface of thin-walled parts. Int J Adv Manuf Technol 98:213–222. https://doi.org/10.1007/s00170-017-1567-4CrossRef

38.

Li JG, Wang SQ (2016) Distortion caused by residual stresses in machining aeronautical aluminum alloy parts: recent advances. Int J Adv Manuf Technol 89:997–1012. https://doi.org/10.1007/s00170-016-9066-6CrossRef

39.

Guo MX, Jiang XH, Ye Y, Ding ZS, Zhang ZY (2019) Investigation of redistribution mechanism of residual stress during multi-process milling of thin-walled parts. Int J Adv Manuf Technol 103:1459–1466. https://doi.org/10.1007/s00170-019-03640-2CrossRef

40.

Wang SQ, Li JG, He CL, Xie ZY (2019) A 3D analytical model for residual stress in flank milling process. Int J Adv Manuf Technol 104:3545–3565. https://doi.org/10.1007/s00170-019-04046-wCrossRef

41.

Ullah I, Zhang S, Waqar S (2022) Numerical and experimental investigation on thermo-mechanically induced residual stress in high-speed milling of Ti-6Al-4V alloy. J Manuf Process 76:575–587. https://doi.org/10.1016/j.jmapro.2022.02.039CrossRef

42.

Yang YF, Jin L, Zhu JP, Kong JX, Li L (2020) Study on cutting force, cutting temperature and machining residual stress in precision turning of pure iron with different grain sizes. Chin J Mech Eng 33:1–9. https://doi.org/10.1186/s10033-020-00471-1CrossRef

43.

Munoa J, Beudaert X, Erkorkmaz K, Iglesias A, Barrios A, Zatarain M (2015) Active suppression of structural chatter vibrations using machine drives and accelerometers. CIRP Ann Manuf Technol 64:385–388. https://doi.org/10.1016/j.cirp.2015.04.106CrossRef

44.

Fei JX, Lin B, Yan S, Ding M, Xiao JL, Zhang J, Zhang XF, Ji CH, Sui TY (2017) Chatter mitigation using moving damper. J Sound Vib 410:49–63. https://doi.org/10.1016/j.jsv.2017.08.033CrossRef

45.

Budak E, Tunc LT, Alan S, Ozguven HN (2012) Prediction of workpiece dynamics and its effects on chatter stability in milling. CIRP Ann Manuf Technol 61:339–342. https://doi.org/10.1016/j.cirp.2012.03.144CrossRef

46.

Munoa J, Beudaert X, Dombovari Z, Altintas Y, Budak E, Brecher C, Stepan G (2016) Chatter suppression techniques in metal cutting. CIRP Ann - Manuf Technol 65:785–808. https://doi.org/10.1016/j.cirp.2016.06.004CrossRef

47.

Duan XY, Peng FY, Zhu ZR, Jiang GZ (2019) Cutting edge element modeling-based cutter-workpiece engagement determination and cutting force prediction in five-axis milling. Int J Adv Manuf Technol 102:421–430. https://doi.org/10.1007/s00170-018-3082-7CrossRef

48.

Ghorbani M, Movahhedy MR (2019) Extraction of surface curvatures from tool path data and prediction of cutting forces in the finish milling of sculptured surfaces. J Manuf Process 45:273–289. https://doi.org/10.1016/j.jmapro.2019.07.008CrossRef

49.

Zhu ZR, Wu JW, Yan R, Peng FY, Tang XW (2021) Cutting force prediction considering tool path curvature and torsion based on screw theory. Int J Adv Manuf Technol 114:1601–1621. https://doi.org/10.1007/s00170-020-06485-2CrossRef

50.

Wang DZ, Ren JX, Tian WJ (2020) A method for the prediction of cutting force for 5-axis ball-end milling of workpieces with curved surfaces. Int J Adv Manuf Technol 107:2023–2039. https://doi.org/10.1007/s00170-020-05030-5CrossRef

51.

Cao DY, Yang YF, Liu ZW, Yu J, Li L (2014) Analysis on residual stresses of the casing part in aeroengine based on hole-drilling method. Mater Sci Forum 770:159–163. https://doi.org/10.4028/www.scientific.net/MSF.770.159CrossRef

52.

Wei Y, Wang XW (2007) Computer simulation and experimental study of machining deflection due to original residual stress of aerospace thin-walled parts. Int J Adv Manuf Technol 33:260–265. https://doi.org/10.1007/s00170-006-0470-1CrossRef

53.

Li YG, Liu CQ, Hao XZ, Gao JX, Maropoulos PG (2015) Responsive fixture design using dynamic product inspection and monitoring technologies for the precision machining of large-scale aerospace parts. CIRP Ann Manuf Technol 64:173–176. https://doi.org/10.1016/j.cirp.2015.04.025CrossRef

54.

Li BZ, Jiang XH, Yang JG, Liang SY (2015) Effects of depth of cut on the redistribution of residual stress and distortion during the milling of thin-walled part. J Mater Process Technol 216:223–233. https://doi.org/10.1016/j.jmatprotec.2014.09.016CrossRef

55.

Ma Y, Feng PF, Zhang JF, Wu ZJ, Yu DW (2016) Prediction of surface residual stress after end milling based on cutting force and temperature. J Mater Process Technol 235:41–48. https://doi.org/10.1016/j.jmatprotec.2016.04.002CrossRef

56.

Ji X, Liang SY (2017) Model-based sensitivity analysis of machining-induced residual stress under minimum quantity lubrication. Proc Inst Mech Eng Part B J Eng Manuf 231:1528–1541. https://doi.org/10.1177/0954405415601802CrossRef

57.

Yang D, Xiao X, Liang XL (2019) Analytical modeling of residual stress in orthogonal cutting considering tool edge radius effect. Int J Adv Manuf Technol 103:2965–2976. https://doi.org/10.1007/s00170-019-03744-9CrossRef

58.

Cheng MH, Jiao L, Yan P, Feng LC, Qiu TY, Wang XB, Zhang BR (2021) Prediction of surface residual stress in end milling with Gaussian process regression. Meas J Int Meas Confed 178:109333. https://doi.org/10.1016/j.measurement.2021.109333CrossRef

59.

Zhu LD, Liu CF (2020) Recent progress of chatter prediction, detection and suppression in milling. Mech Syst Signal Process 143:106840. https://doi.org/10.1016/j.ymssp.2020.106840CrossRef

60.

Chen D, Lin B, Han ZL, Zhang YB (2013) Study on the optimization of cutting parameters in turning thin-walled circular cylindrical shell based upon cutting stability. Int J Adv Manuf Technol 69:891–899. https://doi.org/10.1007/s00170-013-5073-zCrossRef

61.

Kolluru K, Axinte D (2013) Coupled interaction of dynamic responses of tool and workpiece in thin wall milling. J Mater Process Technol 213:1565–1574. https://doi.org/10.1016/j.jmatprotec.2013.03.018CrossRef

62.

Hou LL, Cao SQ (2019) Evaluation method for vibration measurement on casing in aeroengine:theoretical analysis and experimental study. Shock Vib 2019:1648709. https://doi.org/10.1155/2019/1648709CrossRef

63.

Kolluru K, Axinte D (2014) Novel ancillary device for minimising machining vibrations in thin wall assemblies. Int J Mach Tools Manuf 85:79–86. https://doi.org/10.1016/j.ijmachtools.2014.05.007CrossRef

64.

Kolluru KV, Axinte DA, Raffles MH, Becker AA (2014) Vibration suppression and coupled interaction study in milling of thin wall casings in the presence of tuned mass dampers. Proc Inst Mech Eng Part B J Eng Manuf 228:826–836. https://doi.org/10.1177/0954405413508769CrossRef

65.

Xiang HY, Xiao Y (2021) Research on anti-flutter processing of aeroengine casing. Electron Sci Technol Appl 8:1–6. https://doi.org/10.18686/esta.v8i1.171CrossRef

66.

Yang YQ, Xu DD, Liu Q (2015) Vibration suppression of thin-walled workpiece machining based on electromagnetic induction. Mater Manuf Process 30:829–835. https://doi.org/10.1080/10426914.2014.962042CrossRef

67.

Zeng SS, Wan XJ, Li WL, Yin ZP, Xiong YL (2012) A novel approach to fixture design on suppressing machining vibration of flexible workpiece. Int J Mach Tools Manuf 58:29–43. https://doi.org/10.1016/j.ijmachtools.2012.02.008CrossRef

68.

Guo L, Yang F, Li T, Zhou M, Tang JL (2021) Vibration suppression of aeroengine casing during milling. Int J Adv Manuf Technol 113:295–307. https://doi.org/10.1007/s00170-020-06582-2CrossRef

69.

Fei JX, Lin B, Xiao JL, Ding M, Yan S, Zhang XF, Zhang J (2018) Investigation of moving fixture on deformation suppression during milling process of thin-walled structures. J Manuf Process 32:403–411. https://doi.org/10.1016/j.jmapro.2018.03.011CrossRef

70.

Ozturk E, Barrios A, Sun C, Rajabi S, Munoa J (2018) Robotic assisted milling for increased productivity. CIRP Ann 67:427–430. https://doi.org/10.1016/j.cirp.2018.04.031CrossRef

71.

Peng ZL, Zhang DY, Zhang XY (2020) Chatter stability and precision during high-speed ultrasonic vibration cutting of a thin-walled titanium cylinder. Chin J Aeronaut 33:3535–3549. https://doi.org/10.1016/j.cja.2020.02.011CrossRef

72.

Bakker OJ, Papastathis TN, Popov AA, Ratchev SM (2013) Active fixturing: literature review and future research directions. Int J Prod Res 51:3171–3190. https://doi.org/10.1080/00207543.2012.695893CrossRef

73.

Kaya N (2006) Machining fixture locating and clamping position optimization using genetic algorithms. Comput Ind 57:112–120. https://doi.org/10.1016/j.compind.2005.05.001CrossRef

74.

Nee AYC, Whybrew K, Kumar AS (1995) Advanced fixture design for FMS. Springer, London. https://doi.org/10.1007/978-1-4471-2117-6CrossRef

75.

Denkena B, Kiesner J (2015) Strain gauge based sensing hydraulic fixtures. Mechatronics 34:111–118. https://doi.org/10.1016/j.mechatronics.2015.05.008CrossRef

76.

Chu WW, Li YG, Liu CQ, Mou WP, Tang LM (2016) Collaborative manufacturing of aircraft structural parts based on machining features and software agents. Int J Adv Manuf Technol 87:1421–1434. https://doi.org/10.1007/s00170-013-4976-zCrossRef

77.

Wu DB, Wang H, Peng JS, Zhang KY, Yu J, Zheng XS (2020) Machining fixture for adaptive CNC machining process of near-net-shaped jet engine blade. Chin J Aeronaut 33:1311–1328. https://doi.org/10.1016/j.cja.2019.06.008CrossRef

78.

Chen WK, Liu F, Li W, Li ZQ (2018) Deformation prediction and error compensation for turning of aero-engine casing parts. Technol Test 2:124–128. https://doi.org/10.19287/j.cnki.1005-2402 (In Chinese)CrossRef

79.

Li ZL, Zhu LM (2018) Compensation of deformation errors in five-axis flank milling of thin-walled parts via tool path optimization. Precis Eng 55:77–87. https://doi.org/10.1016/j.precisioneng.2018.08.010CrossRef

80.

Ge GY, Du ZC, Yang JG (2020) Rapid prediction and compensation method of cutting force-induced error for thin-walled workpiece. Int J Adv Manuf Technol 106:5453–5462. https://doi.org/10.1007/s00170-020-05050-1CrossRef

81.

Li WT, Wang LP, Yu G (2021) Force-induced deformation prediction and flexible error compensation strategy in flank milling of thin-walled parts. J Mater Process Technol 297:117258. https://doi.org/10.1016/j.jmatprotec.2021.117258CrossRef

82.

Liu CQ, Li YG, Shen WM (2018) A real time machining error compensation method based on dynamic features for cutting force induced elastic deformation in flank milling. Mach Sci Technol 22:766–786. https://doi.org/10.1080/10910344.2017.1402933CrossRef

83.

Diez E, Perez H, Marquez J, Vizan A (2015) Feasibility study of in-process compensation of deformations in flexible milling. Int J Mach Tools Manuf 94:1–14. https://doi.org/10.1016/j.ijmachtools.2015.03.008CrossRef

84.

Zhang SK, Bi QZ, Ji YL, Wang YH (2019) Real-time thickness compensation in mirror milling based on modified Smith predictor and disturbance observer. Int J Mach Tools Manuf 144:103427. https://doi.org/10.1016/j.ijmachtools.2019.103427CrossRef

85.

Zhao X, Zheng LY, Zhang YH (2022) Online first-order machining error compensation for thin-walled parts considering time-varying cutting condition. J Manuf Sci Eng 144:021006. https://doi.org/10.1115/1.4051793CrossRef

86.

Du ZC, Ge GY, Xiao YK, Feng XB, Yang JG (2021) Modeling and compensation of comprehensive errors for thin-walled parts machining based on on-machine measurement. Int J Adv Manuf Technol 115:3645–3656. https://doi.org/10.1007/s00170-021-07397-5CrossRef

Title: A short review on machining deformation control of aero-engine thin-walled casings
Authors: Xin Wang
Biao Zhao
Wenfeng Ding
Changlan Pu
Xingchao Wang
Shengyao Peng
Fangwei Ma
Publication date: 05-07-2022
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-6/2022
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-022-09546-w

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2022

Recent development of clinching tools and machines

Theoretical investigation on the flank milled roughness profile in quasi-homogeneous materials

Digital twin–based testing process management for large and complex equipment components

Recognition of unknown wafer defect via optimal bin embedding technique

Optimization of welding parameters in underwater wet FCAW on a structural steel using support vector regression and sequential quadratic programming

Effect of surface roughness on stress concentration factor of machined surface and cutting parameter optimization in boring of Al-Si piston alloy

Premium Partners