Top

Metallurgical and Materials Transactions A

Published in:

08-07-2019

Abrasive Wear Resistance of Ferrous Microstructures with Similar Bulk Hardness Levels Evaluated by a Scratch-Tester Method

Authors: Balaji Narayanaswamy, Alireza Ghaderi, Peter Hodgson, Pavel Cizek, Qi Chao, Mohammad Safi, Hossein Beladi

Published in: Metallurgical and Materials Transactions A | Issue 10/2019

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

A high-strain scratch tester was employed to investigate the abrasive behavior of four different ferrous microstructures with similar bulk hardness levels. The microstructures revealed unique groove characteristics and significant deformation in their sub-surface layers. Bainite and pearlite displayed superior abrasive wear performance in comparison with martensite and tempered martensite microstructures. The characteristics of microstructure constituents were responsible for the distinct groove characteristics and material removal mechanisms. The effect of normal load was influential in the transition of the material removal mechanism from ploughing to cutting. The sub-surface layer of microstructures revealed significant deformation (i.e., nanostructure formation), which was largely determined by the initial microstructure characteristics. The occurrence of work-hardening phenomenon in the sub-surface layer demonstrated a positive impact during abrasion.

previous article Preparation of Ultrafine W-10 Wt Pct Cu Composite Powders and Their Corresponding Sintered Compacts

next article Stacking Fault Energy of Austenite Phase in Medium Manganese Steel

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

B. Bhushan: Introduction to tribology, 2nd ed. Wiley, New York, 2013, pp. 328–340.

W.A. Glaeser, C.R. Brundle and C.A. Evans: Characterization of Tribological Materials, 2nd edn. Momentum Press, New York, 2010, pp. 80-83.

J.A. Hawk and R.D. Wilson: Tribology of Earthmoving, Mining, and Minerals Processing, CRC Press LLC, Florida, 2001, pp. 1331-1370.

I.M. Hutchings: Tribology: friction and wear of engineering materials, Butterworth-Heinemann Ltd, Great Britain, 1992, pp. 133-135.

K.-H. Gahr: Proc. Conf. Wear Mater., ASME. 1979, pp. 266 – 274.

M. Moore: Wear, 1974, vol. 28, pp. 59-68.

P. Mutton and J. Watson: Wear, 1978, vol. 48, pp. 385-398.

N. Serpik and M. Kantor: Metalloved. Obrab. Met.,1958, vol. 7, pp. 46-50.

K.H. ZumGahr (1987) Microstructure and Wear of Materials. Elsevier Science Publishers, Amsterdam, pp. 392-417.

10.

J. Larsen-Badse and K. Mathew: Wear, 1969, vol. 14, pp. 199-205.

11.

R. Richardson: Wear, 1967, vol. 10, pp. 291-309.

12.

M.M. Khruschov: Proc. Conf. Lubrication and Wear, Institution of Mechanical Engineers, 1957, pp. 655–59.

13.

M. M. Khruschov: Wear, 1974, vol. 28, pp. 69-88.

14.

M. M. Khruschov and M. A. Babichev: Fric. Wear Mach., 12, 1958, pp. 5-23.

15.

E. Rabinowicz, L. A. Dunn and P. G. Russel: Wear, 1961, vol. 4, pp. 345-355.

16.

A. Misra and I. Finnie: Wear, 1981, vol. 68, pp. 33-39.

17.

J. Larsen-Badse: Trans. Metall. Soc., 1996, vol. 236, pp 1461-1466.

18.

J. Larsen-Badse: Wear, 1968, vol. 12, pp. 357-368.

19.

K. Wellinger, H. Uetz and M. Gürleyik: Wear, 1968, vol. 11, pp. 173-199.

20.

H. Çimenoǧlu: Wear, 1997, vol. 210, pp. 204-210.

21.

N. Dube and I. Hutchings: Wear, 1999, vol. 233, pp. 246-56.

22.

J. Larsen-Basse: Scripta Metallurgica et Materialia, 1990, vol. 24, pp. 821-826.

23.

S. Mezlini, M. Zidi, H. Arfa, M.B. Tkaya and P. Kapsa: Comptes Rendus Mecanique, 2005, vol. 333, no. 11, pp. 830-837.

24.

O. Modi, D. Mondal, B. Prasad, M. Singh and H. Khaira: Mater. Sci. Eng. A, 2003, vol. 343, pp. 235-242.

25.

B. Prasad and S. Prasad: Wear, 1991, vol. 151, pp. 1-12.

26.

S.D. Bakshi, P. Shipway and H. Bhadeshia: Wear, 2013, vol. 308, pp. 46-53.

27.

B. Narayanaswamy, P. Hodgson and H. Beladi: Wear, 2016, vol. 354-355, pp. 41-52.

28.

D. Rigney, L. Chen, M.G. Naylor and A. Rosenfield: Wear, 1984, vol. 100, pp. 195-219.

29.

A. Mercer and I. Hutchings: Wear, 1989, vol. 132, pp. 77-97.

30.

A. Misra and I. Finnie: Wear, 1981, vol. 65, pp. 359-373.

31.

M. Moore: Wear Mater., 1983, pp. 1–11.

32.

E. Rabinowicz and A. Mutis: Wear, 1965, vol. 8, pp. 381-390.

33.

B. Narayanaswamy, P. Hodgson and H. Beladi: Wear, 2016, vol. 354, pp. 41-52.

34.

X. Xu, S. van der Zwaag and W. Xu: Wear, 2017, vol. 385, pp. 106-113.

35.

J.I. Pereiraa, G. Tressiaa, P.C. Machadoa, L.A. Francoa and A. Sinatora: Tribol. Int., 2018, vol. 128, pp. 337-348.

36.

R. Ghasemi, L. Elmquist, E. Ghassemali, K. Salomonsson and A.E.W. Jarfors: Tribol. Int., 2018, vol. 120, pp. 465-475.

37.

X. Xu, S. van der Zwaag and W. Xu: Wear, 2016, vol. 358, pp. 80-88.

38.

T.A. Adler and R.P. Walters: Wear, 1993, vol. 162–164, pp. 713–720.

39.

K.-H. ZumGahr and D.V. Doane: Metall. Trans. A, 1980, vol. 11, pp. 613-620.

40.

M. Woldman, E. Van Der Heide, T. Tinga and M.A. Masen: Wear, 2013, vol. 301, pp. 76-81.

41.

X. Xu, S. van der Zwaag and W. Xu: Wear, 2015, vol. 322, pp. 51-60.

42.

ASTM E407-07(2015)e1, Standard Practice for Microetching Metals and Alloys, ASTM International, West Conshohocken, PA, 2015. https://www.astm.org/Standards/E407. Accessed 9 June 2019.

43.

A. Ghaderi, G. Saha,, T. Guo, D. Fabijanic and M. R. Barnett: Wear, 2018, vol. 404, pp. 53-165.

44.

K.J. Hume: A history of engineering metrology, Mechanical Engineering Publications, London, 1980, pp. 152-156.

45.

J.A. Williams: Tribol. Int., 1996, vol. 29, pp. 675-694.

46.

C. A. Brookes, P. Green, P. H. Harrison and B. Moxley: J. Phys. D: Appl. Phys., 1972, vol. 5, pp. 1284-1293.

47.

T.A. Adler, and R. P. Walters: Wear, 1993, vol. 162-164, pp. 713-20.

48.

K. Hokkirigawa and K. Kato: Wear, 1988, vol. 21, pp. 51-57.

49.

F. Pöhl, C. Hardes and W. Theisen: Wear, 2019, vol. 422, pp. 212-222.

50.

K. Hokkirigawa and K. Kato: Wear, 1988, vol. 123, pp. 241-251.

51.

X. Xu, S. van der Zwaag and W. Xu: Wear, 2016, vol. 348, pp. 148-157.

52.

X. Xu, S. van der Zwaag and W. Xu: Wear, 2016, vol. 348, pp. 80-88.

53.

H.K.D.H. Bhadeshia: Bainite in steels, 2nd ed., Inst. of Materials, Great Britain, 1992, pp. 19-26.

54.

L. Chang: Wear, 2005, vol. 258, pp. 730-743.

55.

C. Garcia-Mateo, F. Caballero, J. Chao, C. Capdevila and C.G. De Andres: J. Mater. Sci., 2009, vol. 44, pp. 4617-4624.

56.

A. Leiro, A. Kankanala, E. Vuorinen and B. Prakash: Wear, 2011, vol. 273, pp. 2-8.

57.

B. Narayanaswamy, P. Hodgson, I. Timokhina and H. Beladi: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4883-4895.

58.

E.Vuorinen, N.Ojala, V.Heino, C.Rau and C.Gahm: Tribol. Int., 2016, vol. 98, pp. 108-115.

59.

Y.J. Li, P. Choi, C. Borchers, S. Westerkamp, S. Goto, D. Raabe and R. Kirchheim: Acta Mater., 2011, vol. 59, pp. 3965-3977.

60.

Y.J. Li, P. Choi, S. Goto, C. Borchers, D. Raabe and R. Kirchheim: Acta Mater., 2012. vol. 60, pp. 4005-4016.

61.

Kati Valtonena, Niko Ojalaa, Oskari Haikoc and Veli-Tapani Kuokkalaa: Wear, 2019, vol. 426, pp. 3-13.

Title: Abrasive Wear Resistance of Ferrous Microstructures with Similar Bulk Hardness Levels Evaluated by a Scratch-Tester Method
Authors: Balaji Narayanaswamy
Alireza Ghaderi
Peter Hodgson
Pavel Cizek
Qi Chao
Mohammad Safi
Hossein Beladi
Publication date: 08-07-2019
Publisher: Springer US
Published in: Metallurgical and Materials Transactions A / Issue 10/2019
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI: https://doi.org/10.1007/s11661-019-05354-2

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2019

Effects of Cr Concentration on Cementite Coarsening in Ultrahigh Carbon Steel

Correlation Between Plasticity and Atomic Structure Evolution of a Rejuvenated Bulk Metallic Glass

Documenting Ferrite Nucleation Behavior Differences in the Heat-Affected Zones of EH36 Shipbuilding Steels with Mg and Zr Additions

On the Precipitation of Sigma and Chi Phases in a Cast Super Duplex Stainless Steel

An Investigation of Columnar to Equiaxed Transition and the Effect of Cooling Rate on Nucleus Density Distribution of an Industrial Ti and Nb-Stabilized Ferritic Stainless Steel

Ratchetting in Cold-Drawn Pearlitic Steel Wires

Premium Partners