Skip to main content
Disciplines
Automotive Business IT + Informatics Construction + Real Estate Electrical Engineering + Electronics Energy + Sustainability Insurance + Risk Finance + Banking Management + Leadership Marketing + Sales Mechanical Engineering + Materials
Events
DE
EN
Books
Journals
Topic Page
Marketing
Start single access now
Access for companies
EXTENDED SEARCH
Log in
Top
Metallurgical and Materials Transactions A
Published in: Metallurgical and Materials Transactions A 10/2019

26-07-2019

Stacking Fault Energy of Austenite Phase in Medium Manganese Steel

Authors: Avanish K. Chandan, G. Mishra, B. Mahato, S. G. Chowdhury, S. Kundu, J. Chakraborty

Published in: Metallurgical and Materials Transactions A | Issue 10/2019

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

The stacking fault energy (SFE) of the austenite phase in a medium manganese steel (Fe-4.75Mn-0.18C-0.8Si-0.4Al wt pct) has been determined by X-ray diffraction (XRD) using the modified Reed–Schramm formalism. SFE determination involved XRD line broadening analysis of mean square strain due to dislocations and calculation of stacking fault probability (SFP) from the analysis of diffraction peak shift due to both stacking faults and residual stress in the deformed austenite phase. Determination of SFP revealed a significant change in the separation between two neighboring peak reflections (111 and 200) due to compressive residual stress as compared to the corresponding change in peak separation due to stacking faults. Obtained SFE values were found to vary from 9 to 20 mJ m−2 for the deformed specimens, annealed at an intercritical temperature for different durations for austenite stabilization prior to deformation. SFP determination neglecting residual stress led to a significant decrease in the SFE value of the austenite phase. Dislocations in deformed austenite phase were predominantly \( \langle 110\rangle \{ 111\} \) edge type, and dislocation density was of the order of 1015 m−2. Both XRD and transmission electron microscopy observations suggested twinning-induced plasticity as the prevalent mode of deformation of austenite phase having an SFE value of ~ 20 mJ m−2, whereas transformation-induced plasticity was found to be the major deformation mode for the specimen having an SFE value of ~ 9 mJ m−2.
previous article Abrasive Wear Resistance of Ferrous Microstructures with Similar Bulk Hardness Levels Evaluated by a Scratch-Tester Method
next article Characterization and Modeling of NbNiTaTiW and NbNiTaTiW-Al Refractory High-Entropy Alloys

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

inform now
Appendix
Available only for authorised users
Literature
1.
1 Y.-K. Lee and J. Han: Mater. Sci. Technol., 2015, vol. 31, pp. 843–56.
2.
2 M. Zhang, L. Li, J. Ding, Q. Wu, Y.D. Wang, J. Almer, F. Guo, and Y. Ren: Acta Mater., 2017, vol. 141, pp. 294–303.
3.
3 B. Hu, H. Luo, F. Yang, and H. Dong: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1457–64.
4.
4 R.L. Miller: Metall. Trans., 1972, vol. 3, pp. 905–12.
5.
5 H. Luo, J. Shi, C. Wang, W. Cao, X. Sun, and H. Dong: Acta Mater., 2011, vol. 59, pp. 4002–14.
6.
6 P.J. Gibbs, E.D.E. Moor, M.J. Merwin, B. Clausen, J.G. Speer, and D.K. Matlock: Met. Mater. Trans. A., 2011, vol. 42, pp. 3691–702.
7.
7 G.K. Bansal, D.A. Madhukar, A.K. Chandan, K. Ashok, G.K. Mandal, and V.C. Srivastava: Mater. Sci. Eng. A, 2018, vol. 733, pp. 246–56.
8.
8 S. Lee and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44, pp. 5018–24.
9.
9 W. Cao, C. Wang, C. Wang, J. Shi, M. Wang, H. Dong, and Y. Weng: Sci. China Technol. Sci., 2012, vol. 55, pp. 1814–22.
10.
10 J.I. Kim, C.K. Syn, and J.W. Morris: Metall. Trans. A, 1983, vol. 14, pp. 93–103.
11.
11 A. Saeed-Akbari, J. Imlau, U. Prahl, and W. Bleck: Metall. Mater. Trans. A, 2009, vol. 40, pp. 3076–90.
12.
12 O. Matsumura, Y. Sakuma, and H. Takechi: Scr. Metall., 1987, vol. 21, pp. 1301–10.
13.
13 S. Zaefferer, J. Ohlert, and W. Bleck: Acta Mater., 2004, vol. 52, pp. 2765–78.
14.
14 C. Herrera, D. Ponge, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 4653–64.CrossRef
15.
15 O. Grässel, L. Krüger, G. Frommeyer, and L.W. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409.
16.
16 G. Frommeyer, U. Brüx, and P. Neumann: ISIJ Int., 2003, vol. 43, pp. 438–46.
17.
17 B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.
18.
18 V. Zackay, E.R. Parker, D. Fahr, and R. Busch: Trans. ASM, 1967, vol. 60, pp. 252–9.
19.
19 I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2011, vol. 59, pp. 6449–62.
20.
20 O. Grässel and G. Frommeyer: Mater. Sci. Technol., 1998, vol. 14, pp. 1213–7.
21.
21 E. El-Danaf, S.R. Kalidindi, and R.D. Doherty: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1223–33.
22.
22 S. Curtze and V. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–41.
23.
23 S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 158–62.
24.
24 Y-K Lee: Scripta Mater., 2012, vol. 66, pp. 1002–6.
25.
25 K. Sato, M. Ichinose, Y. Hirotsu, and Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868–77.
26.
26 B.C. De Cooman, O. Kwon and K.-G. Chin: Mater. Sci. and Tech., 2012, vol. 28, pp. 513-27.
27.
27 R.P. Reed and R.E. Schramm: J. Appl. Phys., 1974, vol. 45, pp. 4705–11.
28.
28 R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–51.
29.
Dey SN, Chatterjee P, Sen Gupta SP (2005) Acta Mater 53:4635–42
30.
30 C.C. Bampton, I.P. Jones, and M.H. Loretto: Acta Metall., 1978, vol. 26, pp. 39–51.
31.
Mahato B, Shee SK, Sahu T, Ghosh Chowdhury S, Sahu P, Porter DA, Karjalainen LP (2015) Acta Mater 86:69–79
32.
32 D.T. Pierce, J.A. Jiménez, J. Bentley, D. Raabe, C. Oskay, and J.E. Wittig: Acta Mater., 2014, vol. 68, pp. 238–53.
33.
33 L. Remy: Acta Metall., 1977, vol. 25, pp. 173–9.
34.
Lee SJ, Jung YS, Il Baik S, Kim YW, Kang M, Woo W, Lee YK (2014) Scripta Mater 92:23–26
35.
35 L. Balogh, G. Ribárik, and T. Ungár: J. Appl. Phys., 2006, vol. 100, pp. 023512-1–10.
36.
Warren BE (1990) X-Ray Diffraction. Dover Publications, Mineola
37.
37 B.E. Warren and E.P. Warekois: Acta Metall., 1955, vol. 3, pp. 473–9.
38.
38 J.W.L. Pang, T.M. Holden and T.E. Mason: Acta Mater., 1998, vol. 46, No.5, pp.1503-18.
39.
Noyan IC, Cohen JB (1987) Residual Stress: Measurement by Diffraction and Interpretation, 1st edn. Springer, New York
40.
40 K. Van Acker, J. Root, P. Van Houtte and E. Aernoudt: Acta Mater., 1996, vol. 44, No. 10, pp. 4039-49.
41.
41 P. Van Houtte and L. De Buyser: Acta metall. Mater., 1993, vol. 41, No. 2, pp. 323-36.
42.
42 P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 366–75.
43.
43 Y. Tomota, H. Tokuda, Y. Adachi, and M. Wakita: Acta Mater., 2004, vol. 52, pp. 5737–45.
44.
44 S. Morooka, Y. Tomota, and T. Kamiyama: ISIJ Int., 2008, vol. 48, pp. 525–30.
45.
45 T. Ungár, I. Dragomir, Á. Révész, and A. Borbély: J. Appl. Crystallogr., 1999, vol. 32, pp. 992–1002.
46.
46 T. Ungár and A. Borbély: Appl. Phys. Lett., 1996, vol. 69, pp. 3173–5.
47.
T. Ungár: Proc. Denver X-ray Conf. 1996, “Advances X-ray Anal”.
48.
48 T. Ungár and G. Tichy: Phys. Status Solidi, 1999, vol. 171, pp. 425–34.
49.
49 X. Tian, H. Li, and Y. Zhang: J Mater Sci, 2008, vol. 43, pp. 6214–22.
50.
50 M. Kang, W. Woo, Y.-K. Lee, and B.-S. Seong: Mater. Lett., 2012, vol. 76, pp. 93–5.
51.
51 J.E. Jin and Y.K. Lee: Acta Mater., 2012, vol. 60, pp. 1680–8.
52.
52 J.S. Jeong, W. Woo, K.H. Oh, S.K. Kwon, and Y.M. Koo: Acta Mater., 2012, vol. 60, pp. 2290–9.
53.
53 G. Ribárik, J. Gubicza, and T. Ungár: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 343–7.
54.
54 S. Lee, W. Woo, and B.C. De Cooman: Metall. Mater. Trans. A, 2016, vol. 47, pp. 2125–40.
55.
55 R. Adler, H. Otte, and C. Wagner: Metall. Trans., 1970, vol. 1, pp. 2375–82.
56.
56 D. Rafaja, C. Krbetschek, C. Ullrich, and S. Martin: J. Appl. Crystallogr., 2014, vol. 47, pp. 936–47.
57.
57 H.M. Otte and D.O. Welch: Philos. Mag., 1964, vol. 9, pp. 299–313.
58.
Arlazarov A, Gouné M, Bouaziz O, Hazotte A, Petitgand G, Barges P: Mater. Sci. Eng. A, 2012, vol. 542, pp. 31–39.
59.
59 J.-M. Jang, S.-J. Kim, N.H. Kang, K.-M. Cho, and D.-W. Suh: Met. Mater. Int., 2009, vol. 15, pp. 909–16.
60.
60 G. Ribarik, T. Ungar and J. Gubicza: J. Appl. Cryst., 2001, vol. 34, pp. 669-76.
61.
61 A. Borbély, J. Dragomir-Cernatescu, G. Ribárik, and T. Ungár: J. Appl. Crystallogr., 2003, vol. 36, pp. 160–2.
62.
PROFIT: Profile fitting software. The Netherlands: PANAlytical (formerly Philips), PANAlytical, 1996.
63.
63 H.M. Rietveld: J. Appl. Cryst., 1969, vol. 2, pp. 65–71.
64.
L. Lutterotti, S. Matthies, and H.-R. Wenk: Proc. Twelfth Int. Conf. Textures Mater., 1999, vol. 1, pp. 1599–1604.
65.
65 G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.
66.
66 L.G. Telser, J. Aitchison, and J.A.C. Brown: J. Farm Econ., 1959, vol. 41, p. 161.
67.
67 V.G. Kurdjumow and G. Sachs: Zeitschrift für Phys., 1930, vol. 64, pp. 325–43.
68.
68 C. Wang, J. Shi, C.Y. Wang, W.J. Hui, and M.Q. Wang: ISIJ Int., 2011, vol. 51, pp. 651–6.
69.
69 R. Wei, M. Enomoto, R. Hadian, H.S. Zurob, and G.R. Purdy: Acta Mater., 2013, vol. 61, pp. 697–707.
70.
Wang C, Cao W, Han Y, Wang C, Xiang Huang C, Dong H (2015) J Iron Steel Res Int 22:42–47
71.
71 H. Huang, O. Matsumura, and T. Furukawa: Mater. Sci. Technol., 1994, vol. 10, pp. 621–6.
72.
72 H.F. Xu, J. Zhao, W.Q. Cao, J. Shi, C.Y. Wang, C. Wang, J. Li, and H. Dong: Mater. Sci. Eng. A, 2012, vol. 532, pp. 435–42.
73.
73 J. Cohen: Local Atomic Arrangements Studied by X-Ray Diffraction, Gordon and Breach, New York, 1966.
74.
74 J. Chakraborty, T. Maity, K. Kumar, and S. Mukherjee: Adv. Mater. Res., 2014, vol. 996, pp. 855–9.
75.
75 U. Welzel, J. Ligot, P. Lamparter, A.C. Vermeulen and E.J. Mittemeijer: J. Appl. Crystallography, 2005, vol. 38, pp. 1-29.
76.
W. Serruys: Ph.D. Thesis, Katholieke Univ. Leuven, 1988.
77.
77 M. Eckhardt and H. Ruppersberg: Z.Metallk. 1988, vol. 79, pp. 662-66.
78.
78 I.C. Noyan and J.B. Cohen: Adv. X-ray Analysis, 1983, vol. 27, p. 129.
79.
Gubicza J (2014) X-Ray Line Profile Analysis in Materials Science. IGI Global, Hershey
80.
80 K. Jeong, J.E. Jin, Y.S. Jung, S. Kang, and Y.K. Lee: Acta Mater., 2013, vol. 61, pp. 3399–410.
81.
81 H. Idrissi, K. Renard, L. Ryelandt, D. Schryvers, and P.J. Jacques: Acta Mater., 2010, vol. 58, pp. 2464–76.
82.
82 S. Lee, K. Lee, and B.C. De Cooman: Metall. Mater. Trans. A, 2015, vol. 46, pp. 2356–63.
83.
83 P.H. Adler, G.B. Olson, and W.S. Owen: Metall. Mater. Trans. A, 1986, vol. 17, pp. 1725–37.
Metadata
Title
Stacking Fault Energy of Austenite Phase in Medium Manganese Steel
Authors
Avanish K. Chandan
G. Mishra
B. Mahato
S. G. Chowdhury
S. Kundu
J. Chakraborty
Publication date
26-07-2019
Publisher
Springer US
Published in
Metallurgical and Materials Transactions A / Issue 10/2019
Print ISSN: 1073-5623
Electronic ISSN: 1543-1940
DOI
https://doi.org/10.1007/s11661-019-05367-x

Other articles of this Issue 10/2019

Metallurgical and Materials Transactions A 10/2019 Go to the issue

OriginalPaper

Quenching and Partitioning of Plate Steels: Partitioning Design Methodology

Communication

Documenting Ferrite Nucleation Behavior Differences in the Heat-Affected Zones of EH36 Shipbuilding Steels with Mg and Zr Additions

OriginalPaper

Competitive Growth of Degenerate Pattern and Dendrites During Directional Solidification of a Bicrystal Metallic Alloy

Communication

Thermodynamic Self-interaction of Si in Ferritic Fe-Si Alloys

OriginalPaper

Simulations of Grain Refinement in Various Steels Using the Three-Scale Crystal Plasticity Model

OriginalPaper

Plasma Spheroidization of Vitreloy 106A Bulk Metallic Glass Powder

Premium Partners

    Image Credits