Top

Journal of Materials Engineering and Performance

Published in:

01-10-2012

Acoustic Emission Methodology to Evaluate the Fracture Toughness in Heat Treated AISI D2 Tool Steel

Authors: Sajad Mostafavi, Mohamad Fotouhi, Abed Motasemi, Mehdi Ahmadi, Cevat Teymuri Sindi

Published in: Journal of Materials Engineering and Performance | Issue 10/2012

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

In this article, fracture toughness behavior of tool steel was investigated using Acoustic Emission (AE) monitoring. Fracture toughness (K _IC) values of a specific tool steel was determined by applying various approaches based on conventional AE parameters, such as Acoustic Emission Cumulative Count (AECC), Acoustic Emission Energy Rate (AEER), and the combination of mechanical characteristics and AE information called sentry function. The critical fracture toughness values during crack propagation were achieved by means of relationship between the integral of the sentry function and cumulative fracture toughness (KICUM). Specimens were selected from AISI D2 cold-work tool steel and were heat treated at four different tempering conditions (300, 450, 525, and 575 °C). The results achieved through AE approaches were then compared with a methodology proposed by compact specimen testing according to ASTM standard E399. It was concluded that AE information was an efficient method to investigate fracture characteristics.

previous article Deformation Behavior of 6061 Aluminum Alloy Through Tube Channel Pressing: Severe Plastic Deformation

next article Impact Toughness of an Isothermally Treated Zeron®100 SDSS

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

L. Bourithis, G.D. Papadimitriou, and J. Sideris, Comparison of Wear Properties of Tool Steels AISI, D2 and O1 with the Same Hardness, J. Tribol. Int., 2006, 39, p 479–489CrossRef

D. Dasa, A.K. Duttab, and K.K. Rayc, Influence of Varied Cryotreatment on the Wear Behavior of AISI, D2 Steel, J. Wear, 2009, 266, p 297–309CrossRef

X. Ma, R. Liu, and D.Y. Li, Abrasive Wear Behaviour of D2 Tool Steel with Respect to Load and Sliding Speed Under Dry Sand/Rubber Wheel Abrasion Condition, J. Wear, 2000, 241, p 79–85CrossRef

http://www.bucorp.com/files/aisi_d2.pdf

H. Chang, E. Han, J.Q. Wang, and W. Ke, Acoustic Emission Study of Corrosion Fatigue Crack Propagation Mechanism for LY12CZ and 7075-T6 Aluminum Alloys, J. Mater. Sci., 2005, 40, p 5669–5674CrossRef

C.K. Mukhopadhyay, K.V. Kasiviswanathan, T. Jayakumar, and B. Raj, Acoustic Emission During Tensile Deformation of Annealed and Cold-Worked AISI Type 304 Austenitic Stainless Steel, J. Mater. Sci., 1993, 28, p 145–154CrossRef

Y. Blanchettea, J.I. Dicksona, and M.N. Bassim, Detection of General Yielding in a516 Steel by Acoustic Emission, J. Eng. Fract. Mech., 1983, 17, p 227–234CrossRef

M.N. Bassim, Detection of Fatigue Crack Propagation with Acoustic Emission, J. NDT & E Int., 1992, 25, p 287–289CrossRef

M.N. Bassima, S.S. Lawrence, and C.D. Liu, Detection of the Onset of Fatigue Crack Growth in Rail Steels Using Acoustic Emission, J. Eng. Fract. Mech., 1994, 47, p 207–214CrossRef

10.

V.V. Korchevskii, Measurement of the Parameters of the Acoustic Emission When Metals are Stretched Acoustic Measurements, J. Meas. Tech., 2006, 49, p 517–523CrossRef

11.

C.T. Sindi, M.A. Najafabadi, and S.A. Ebrahimian, Fracture Toughness Determination of Heat Treated AISI, D2 Tool Steel Using AE Technique, J. ISIJ Int, 2011, 51, p 305–312CrossRef

12.

A. Refahi Oskouei, A. Zucchelli, M. Ahmadi, and G. Minak, An Integrated Approach Based on Acoustic Emission and Mechanical Information to Evaluate the Delamination Fracture Toughness at Mode I in Composite Laminate, J. Mater. Des., 2010. doi:10.1016/j.matdes.2010.08.048.

13.

G. Minak and A. Zucchelli, Damage Evaluation and Residual Strength Prediction of CFRP Laminates by Means of Acoustic Emission Technique, Composite Materials Research Progress, L.P. Durand, Ed., Nova Science Publishers, New York, 2008, p 165–207

14.

G. Minak, P. Morelli, and A. Zucchelli, Fatigue Residual Strength of Circular Laminate Graphite-Epoxy Composite Plates Damaged by Transverse Load, Compos. Sci. Technol., 2009, 69(9), p 1358–1363CrossRef

15.

G. Minak, S. Abrate, D. Ghelli, R. Panciroli, and A. Zucchelli, Residual Torsional Strength after Impact of CFRP Tubes, ICCE-17, World J. Eng., Honolulu (HI), 26 Luglio-1 August.

16.

Y. Blanchettea, J.I. Dicksona, and M.N. Bassim, The Use of Acoustic Emission to Evaluate Critical Values of K and J in 7075-T651 Aluminum Alloy, J. Eng. Fract. Mech., 1984, 20, p 359–371CrossRef

17.

C.S. Camerini, J.M.A. Rebello, and S.D. Soares, Relationship Between Acoustic Emission and CTOD Testing for a Structural Steel, J. NDT & E Int., 1992, 25, p 127–133CrossRef

18.

T. Ohira, and Y.-H. Pao, Microcrack Initiation and Acoustic Emission During Fracture Toughness Tests of A533B Steel, J. Metall. Mater. Trans. A, 1986, 17, p 843–852CrossRef

19.

X. Long, G. Cai, and L.-E. Svensson, Investigation of Fracture and Determination of Fracture Toughness of Modified 9Cr-1Mo Steel Weld Metals Using AE Technique, J. Mater. Sci. Eng. A, 1999, 270, p 260–266CrossRef

20.

ASTM E399, Annual Book of ASTM Standards, Vol 03.01, American Society for Testing and Materials, New York, 2001

21.

ASTM E8-01, Annual Book of ASTM Standards, Vol 03.01, American Society for Testing and Materials, New York, 2001

22.

D. Dilipkumar, V.S.R. Gudimetla, and W.E. Wood, Amplitude-Distribution Analysis of Acoustic Emission, a Simplified Method of Amplitude-Distribution Analysis Based on Cumulative Counts and Events is Presented and a New Model for Amplitude Distribution is Proposed, J. Exp. Mech., 1979, 19, p 438–443CrossRef

23.

M. Arii, H. Kashiwaya, and T. Yanuki, Slow Crack Growth and Acoustic Emission Characteristics in COD Test, J. Eng. Fract. Mech., 1975, 7, p 551–552CrossRef

24.

H. Roy, N. Parida, S. Sivaprasad, S. Tarafder, and K.K. Ray, Acoustic Emissions During Fracture Toughness Tests of Steels Exhibiting Varying Ductility, J. Mater. Sci. Eng. A, 2008, 486, p 562–571CrossRef

Title: Acoustic Emission Methodology to Evaluate the Fracture Toughness in Heat Treated AISI D2 Tool Steel
Authors: Sajad Mostafavi
Mohamad Fotouhi
Abed Motasemi
Mehdi Ahmadi
Cevat Teymuri Sindi
Publication date: 01-10-2012
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 10/2012
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-011-0119-6

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 10/2012

Microstructural Characterization of Cermet Cladding Developed Through Microwave Irradiation

Impact Toughness of an Isothermally Treated Zeron®100 SDSS

Surface Modification and In Vitro Characterization of Cp-Ti and Ti-5Al-2Nb-1Ta Alloy in Simulated Body Fluid

Influence of Processing Parameters on Residual Stress of High Velocity Oxy-Fuel Thermally Sprayed WC-Co-Cr Coating

Concept-Level Analysis and Design of Polyurea for Enhanced Blast-Mitigation Performance

Process Modeling of Ti-6Al-4V Linear Friction Welding (LFW)

Premium Partners