Top

The International Journal of Advanced Manufacturing Technology

Published in:

29-05-2023 | ORIGINAL ARTICLE

Advance on surface finishing technology of precision bearing cylindrical rollers

Authors: Xingfu Wang, Xiuhong Li, Xiaolong Ma, Wenhui Li, Shengqiang Yang

Published in: The International Journal of Advanced Manufacturing Technology | Issue 5-6/2024

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Precision bearings are key components of mechanical equipment, and their quality almost restricts the overall development level of key technologies in the equipment manufacturing industry. As the critical element of precision bearings, the surface quality of rollers significantly affects their operational performance, reliability, and fatigue life. The development of surface finishing technology for rollers is a practical solution to improve their surface quality. However, there is a lack of systematic exposition of the research status and development direction of this technology. This study provides a comprehensive review and summary of the existing surface finishing technology for cylindrical rollers. First, the article introduces the impact of surface integrity on bearing performance. Second, it provides a comprehensive classification and summary of the current surface finishing technologies for cylindrical rollers, which include centerless grinding, superfinishing, electrochemical mechanical finishing, magnetic fluid grinding, double-side lapping, double-disc straight groove grinding, shear thickening polishing, and mass finishing. Third, the surface roughness and roundness error ranges achieved by different finishing technologies are quantitatively compared, and their processing characteristics are comprehensive compared. Finally, the article forecasts the future development trend of surface finishing technology for cylindrical rollers.

previous article Modeling of grinding force in longitudinal ultrasonic vibration–assisted grinding alumina ceramics and experimental evaluation

next article Research of dry tribochemical mechanical polishing SiC with an innovation abrasive-catalytic abrasive cluster

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Wang YM, Suo SF, Li YJ et al (2016) Research report on the development strategy of high end bearings. Tsinghua University Press, Beijing

Kim SJ (2021) Analytical consideration of the radial clearance to reduce cage slip of the turbo engine roller bearing. J Mech Sci Technol 35(7):2827–2839. https://doi.org/10.1007/s12206-021-0606-0CrossRef

Yang ZH, Chen H, Yu TX (2018) Effects of rolling bearing configuration on stiffness of machine tool spindle. Proc Inst Mech Eng, Part C: J Mech Eng Sci 232(5):775–785. https://doi.org/10.1177/0954406217693659CrossRef

Zhang YQ, Tan QC, Li JG et al (2012) Fatigue life of taper roller bearings in drive rear axle main gear reducer. Mach , Mater Sci Eng App 510:112–116. https://doi.org/10.4028/www.scientific.net/AMR.510.112CrossRef

Doll GL (2022) Surface engineering in wind turbine tribology. Surf Coatings Technol 442:128545. https://doi.org/10.1016/j.surfcoat.2022.128545CrossRef

Yang TY, Ding Q, Guo T et al (2016) Analysis of local damage vibration characteristics in the axle bearings of high-speed train bogies. J Vibr , Meas Diag 36(4):665-673, 808. https://doi.org/10.16450/j.cnki.1004-6801.2016.04.009CrossRef

Liu TW, Zhang N, Liang W et al (2014) Failure simulation analysis and experimental verification of bearings for spaceborne moving mechanism. China Mec Eng 21:2864–2868. https://doi.org/10.3969/j.issn.1004-132X.2014.21.005CrossRef

Liu DL, Jiang T, He YH et al (2015) Discussion on failure problems of aero-bearing. Fail Anal Prev 5:324–330. https://doi.org/10.3969/j.issn.1673-6214.2015.05.012CrossRef

Xiong WL, Yang JP, An Q (2015) Effect of bearing roller machining precision on the dynamic performance of high speed motorized spindle. J East China Univ Sc Technol 45(5):831–838. https://doi.org/10.14135/j.cnki.1006-3080.20180613002CrossRef

10.

Darisuren S, Amanov A, Pyun YS (2019) Improvement in fatigue life of needle roller bearing. Tribol Lubr 35(4):237–243. https://doi.org/10.9725/kts.2019.35.4.237CrossRef

11.

Wang W, Hadfield M, Wereszczak AA (2009) Surface strength of silicon nitride in relation to rolling contact performance. Ceram Int 35(8):3339–3346. https://doi.org/10.1016/j.ceramint.2009.05.034CrossRef

12.

Tong VC, Hong SW (2017) Study on the stiffness and fatigue life of tapered roller bearings with roller diameter error. Proc Inst Mech Eng Part J-J Eng Tribol 231(2):176–188. https://doi.org/10.1177/1350650116649889CrossRef

13.

GB/T 4661-2015 (2015) Rolling bearings-Cylindrical rollers. https://std.samr.gov.cn/gb/search/gbDetailed?id=71F772D80EB0D3A7E05397BE0A0AB82A

14.

China Bearing Industry Association (2022) Outline of the 14th five year plan for the development of the national bearing industry. http://www.chinacaj.net/i,16,14776,0.html

15.

Wang Y, Wang YH, Han TH et al (2019) Improvement on finishing technology for chamfer of cylindrical rollers. Bearing 10:57. https://doi.org/10.19533/j.issn1000-3762.2019.10.005CrossRef

16.

Inasaki I, Karpuschewski B, Lee HS (2001) Grinding chatter - origin and suppression. CIRP Annals 50(2):515–534. https://doi.org/10.1016/S0007-8506(07)62992-8CrossRef

17.

Garitaonandia I, Albizuri J, Hernandez-Vazquez JM et al (2013) Redesign of an active system of vibration control in a centerless grinding machine: Numerical simulation and practical implementation. Precis Eng J Int Soc Precis Eng Nanotechnol 37(3):562–571. https://doi.org/10.1016/j.precisioneng.2013.01.001CrossRef

18.

Zakharov OV, Datskovskaya EA (2010) Setup of centerless superfinishing machine tools. Russian Eng Res 30(12):1263–1267. https://doi.org/10.3103/S1068798X10120191CrossRef

19.

Taniguchi N (1983) Current status in, and future trends of, ultraprecision machining and ultrafine materials processing. CIRP Annals – Manufact Technol 32(2):573–582. https://doi.org/10.1016/S0007-8506(07)60185-1MathSciNetCrossRef

20.

Wang X, Zhao P, Lyu BH et al (2019) Research status of ultra-precision machining technologies for working surfaces of rolling bearings. China Mech Eng 30(11):1301–1309. https://doi.org/10.3969/j.issn.1004-132X.2019.11.006CrossRef

21.

Zhou FF, Yuan JL, Yao WF et al (2019) Review on ultra-precision machining technology of precision balls. China Mech Eng 30(13):1528–1539. https://doi.org/10.3969/j.issn.1004-132X.2019.13.003CrossRef

22.

Jiang L, Zheng JX, Peng WM et al (2022) Research progress of ultra-precision polishing technologies for basic components of spacecraft. Surface Technol 51(12):1–19. https://doi.org/10.16490/j.cnki.issn.1001-3660.2022.12.001CrossRef

23.

Yao WF, Yuan JL, Zhong MP et al (2019) Review on precision machining technology for outer diameters of cylindrical rollers. China Mech Eng 30(10):1195–1206. https://doi.org/10.3969/j.issn.1004-132X.2019.10.009CrossRef

24.

Chu MQ, Ding RG, Zhang SY et al (2021) Surface integrity for machining aerospace parts. Mater Rep 35(7):7183–7189. https://doi.org/10.11896/cldb.19100143CrossRef

25.

Wang DF, Yuan JL, Wang YS et al (2022) Research progresses on surface integrity of bearing grooves. China Mech Eng 33(18):2143–2160. https://doi.org/10.3969/j.issn.1004-132X.2022.18.001CrossRef

26.

Cui L, Su Y (2022) Contact fatigue life prediction of rolling bearing considering machined surface integrity. Indust Lubr Tribol 74(1):73–80. https://doi.org/10.1108/ILT-08-2021-0345CrossRef

27.

Guan J (2019) Influence of rough surface on damage evolution and fatigue life of M50-bearing steel containing a spherical inclusion. Int J Damage Mech 28(10):1580–1604. https://doi.org/10.1177/1056789519842367CrossRef

28.

Ueda T, Mitamura N (2009) Mechanism of dent initiated flaking and bearing life enhancement technology under contaminated lubrication condition. Part II. Tribol Int 42(11-12):1832–1837. https://doi.org/10.1016/j.triboint.2008.12.010CrossRef

29.

Guan J (2019) Research on rolling contact fatigue damage behavior of M50 bearing steel in aeroenging rolling bearing. PhD thesis, Harbin Institute of Technology. https://doi.org/10.27061/d.cnki.ghgdu.2019.000416

30.

Heim LR (1918) Roll grinding machine. US: 1264930. https://patentscope2.wipo.int/search/zh/detail.jsf?docId=US34174939

31.

Cui Q, Cheng K, Chen SJ et al (2017) An innovative investigation on the workpiece kinematics and its roundness generation in through-feed centreless grinding. Proc Inst Mech Eng, Part B: J Eng Manuf 231(7):1131–1143. https://doi.org/10.1177/0954405415585378CrossRef

32.

Cui Q, Chen SJ, Ding H et al (2016) Dynamic model of material removal process in through-feed centerless grinding based on the Lagrange equation. Key Eng Mater 667(1):173–180. https://doi.org/10.4028/www.scientific.net/KEM.667.173CrossRef

33.

Safarzadeh H, Leonesio M, Bianchi G et al (2020) Roundness prediction in centreless grinding using physics-enhanced machine learning techniques. Int J Adv Manuf Technol 112(3-4):1051–1063. https://doi.org/10.1007/s00170-020-06407-2CrossRef

34.

Hashimoto F, Gallego I, Oliveira JFG et al (2012) Advances in centerless grinding technology. CIRP Annals-Manufact Technol 61(2):747–770. https://doi.org/10.1016/j.cirp.2012.05.003CrossRef

35.

Yalovoy OA, Zakharov OV, Kochetkov AV (2015) The adaptive control of accuracy at centerless grinding of rolling bearings. IOP Conf Series: Mater Sci Eng 93(1):12063. https://doi.org/10.1088/1757-899x/93/1/012063CrossRef

36.

Cui Q, Ding H, Cheng K (2015) An analytical investigation on the workpiece roundness generation and its perfection strategies in centreless grinding. Proc Inst Mech Eng , Part B: J Eng Manuf 229(3):409–420. https://doi.org/10.1177/0954405414530899CrossRef

37.

Cui Q, Chen S, Ding H et al (2016) An investigation on the workpiece roundness generation in centerless grinding based on the integration of virtual machine tool and workpiece material removal mechanism. Key Eng Mater 667(1):588–594. https://doi.org/10.4028/www.scientific.net/KEM.667.588CrossRef

38.

Cui Q (2015) An investigation on the rounding process and virtual machining system for high precision centerless grinding. PhD thesis, Harbin Institute of Technology.

39.

Rowe W (2014) Rounding and stability in centreless grinding. Int J Machine Tools Manuf 82-83:1–10. https://doi.org/10.1016/j.ijmachtools.2014.03.004MathSciNetCrossRef

40.

Safarzadeh H, Monno H (2022) Continuous multi-angle variation (CMAV) for faster roundness correction in centreless grinding. Int J Adv Manuf Technol 119(11-12):7517–7531. https://doi.org/10.1007/s00170-021-08647-2CrossRef

41.

Otaghvar MH, Hahn B, Werner H et al (2018) A novel approach to roundness generation analysis in centerless through-feed grinding in consider of decisive parameters of grinding gap by use of 3d kinematic simulation. Procedia CIRP 77:247–250. https://doi.org/10.1016/j.procir.2018.09.007CrossRef

42.

Otaghvar MH, Hahn B, Werner H et al (2019) Optimization of centerless through-feed grinding using 3d kinematic simulation (conference paper). Procedia CIRP 79:308–312. https://doi.org/10.1016/j.procir.2019.02.072CrossRef

43.

Adrian C, Daniela P (2016) The study of kinetic energy variation during centerless grinding in the conditions of adaptive control. 2016 International Conference on Applied and Theoretical Electricity (Icate), Craiova, Romania. https://www.webofscience.com/wos/alldb/full-record/WOS:000390767500062

44.

Barrenetxea D, Mancisidor I, Beudaert X et al (2018) Increased productivity in centerless grinding using inertial active dampers. CIRP Annals – Manuf Technol 67(1):337–340. https://doi.org/10.1016/j.cirp.2018.04.093CrossRef

45.

Gao ZB, Gao HY (2016) Analysis of grinding wheel profile in feeding-through centerless grinding of tapered roller. J Mech Eng Res Dev 39(1):134–141

46.

Hänel A, Teicher U, Pätzold H et al (2018) Investigation of a carbon fibre-reinforced plastic grinding wheel for high-speed plunge-cut centreless grinding application. Proc Inst Mech Eng , Part B: J Eng Manuf 232(14):2663–2669. https://doi.org/10.1177/0954405417690556CrossRef

47.

Trubitsyn AV, Svirshchev VI, Flegentov VK (2014) Force required in centerless external grinding of superhard powder composites. Russian Eng Res 34(3):180–182. https://doi.org/10.3103/S1068798X14030162CrossRef

48.

Zhou FF, Zhang XL, Yuan JL et al (2021) Analysis on grinding result for large size cylindrical roller with logarithmic crown. Bearing 2. https://doi.org/10.19533/j.issn1000-3762.2021.02.006

49.

Cernaianu A (2014) The Analysis of the Temperature Influence on the Processing Precision in Centerless Grinding Machines. In: Applied Mechanics and Materials, vol 659. Trans Tech Publications Ltd, pp 331–336

50.

Mondal SC, Mandal P (2015) An application of particle swarm optimization technique for optimization of surface roughness in centerless grinding operation. International Conference on Research into Design, Bangalore. https://d.wanfangdata.com.cn/conference/CC0215050457

51.

Barbosa E, Santos Delfino A, Brandão L (2017) The use of alternative coolant techniques to reduce the environmental impact in the use of water in through-feed centreless grinding. Int J Adv Manuf Technol 91(9-12):3417–3425. https://doi.org/10.1007/s00170-017-0030-xCrossRef

52.

Neto LMG, Rodriguez RL, Lopes JC et al (2022) Application of optimized lubri-cooling technique in through-feed centerless grinding process of bearing steel sae 52100. Int J Adv Manuf Technol 120(1-2):515–526. https://doi.org/10.1007/s00170-022-08686-3CrossRef

53.

Xu WX, Wu YB (2018) A novel approach to fabricate high aspect ratio micro-rod using ultrasonic vibration-assisted centreless grinding. Int J Mech Sci 141:21–30. https://doi.org/10.1016/j.ijmecsci.2018.03.038CrossRef

54.

Xu WX, Wu YB (2012) Simulation investigation of through-feed centerless grinding process performed on a surface grinder. J Mater Proc Technol 212(4):927–935. https://doi.org/10.1016/j.jmatprotec.2011.12.002CrossRef

55.

Xu WX, Cui DD, Wu YB (2016) Sphere forming mechanisms in vibration-assisted ball centreless grinding. Int J Mach Tools Manuf 108:83–94. https://doi.org/10.1016/j.ijmachtools.2016.06.004CrossRef

56.

Shuo YQ, Wu X, Wang TJ et al (2006) Manufacturing equipment of rolling bearing. China Machine Press, Beijing

57.

Xia XT, Li H, Hao G et al (2002) Theory and application of centerless grinding. National Defence Industry Press, Beijing

58.

Chang SH, Farris TN, Chandrasekar S (2008) Experimental analysis on evolution of superfinished surface texture. J Mater Proc Technol 203(1-3):365–371. https://doi.org/10.1016/j.jmatprotec.2007.10.032CrossRef

59.

Puthanangady TK, Malkin S (1995) Experimental investigation of the superfinishing process. Wear 185(1-2):173–182CrossRef

60.

Yang BS (2017) Research on contact characteristics between oilstones and rollers in through-feed superfinishing of taper rollers. Master thesis, Henan University of Science and Technology.

61.

Chang SH, Farris TN, Chandrasekar S (2000) Contact mechanics of superfinishing. J Tribol 122(2):388–393. https://doi.org/10.1115/1.555374CrossRef

62.

Chang SH, Farris TN, Chandrasekar S (2003) Experimental characterization of superfinishing. Proc Inst Mech Eng , Part B: J Eng Manuf 217(7):941–951. https://doi.org/10.1243/09544050360686815CrossRef

63.

Onishi T, Ohashi K, Higashi K et al (2014) Development of an advanced machine control system in superfinishing the automatic determination of the suitable machining time. Adv Mater Res 1017:515–519. https://doi.org/10.4028/www.scientific.net/AMR.1017.515CrossRef

64.

Varghese B, Malkin S (2000) Selection of optimal superfinishing parameters. J Manuf Proc 2(2):124–130CrossRef

65.

Varghese B, Malkin S (2001) Rounding and lobe formation during superfinishing. J Manuf Proc 3(2):102–107. https://doi.org/10.1016/S1526-6125(01)70125-9CrossRef

66.

Soutome T, Sato K (2009) Study on superposition superfinishing (1st report)(Article). Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C 75(751):741–748. https://doi.org/10.1299/kikaic.75.741CrossRef

67.

Gao ZB, Yang XB, Guo XC (2018) Analysis on convexity during superfinishing of tapered rollers with cone-cylinder matching guide rollers. Bearing 12:17–23. https://doi.org/10.19533/j.issnl000-3762.2018.12.005CrossRef

68.

Gao ZB, Li QL (2014) Particularity of superfinishing technology for rolling bearings. Bearing 8:53–58

69.

Gao ZB, Ma W, Deng XZ et al (2013) Analysis of crown generating mechanism in fixed posture through-feed superfinishing of taper rollers. J Mech Eng 23:96–104. https://doi.org/10.3901/JME.2013.23.096CrossRef

70.

Xue JX, Jia SY, Yang BS (2016) The polish properties analysis of through-feed superfinishing tapered roller. Manuf Automat 38(1):33–37

71.

Xue JX, Yang BS, Jia SY (2017) Analysing cutting edge of taper roller and oilstone in fixed posture through-feed superfinishing. Mech Sci Technol Aerosp Eng 36(8):1244–1249. https://doi.org/10.13433/j.cnki.1003-8728.2017.0816CrossRef

72.

Xue JX, Yang BS, Wang LN et al (2017) Processing characteristic analysis on through-feed superfinishing of tapered rollers. Bearing 6:21–26. https://doi.org/10.19533/j.issnl000-3762.2017.06.005CrossRef

73.

Jia SY (2016) Study on abrading characteristics and motion stability in through-feed superfinishing for tapered roller. Master thesis, Henan University of Science and Technology.

74.

Wang LN (2018) Study on wear mechanism of oilstone and roller in through-feed superfinishing for tapered roller. Master thesis, Henan University of Science and Technology.

75.

Jia SX, Gao ZB, Tang Z et al (2020) Numerical simulation analysis of crown profiling during median putting through-feed superfinishing of tappered roller. Bearing 5:10–18. https://doi.org/10.19533/j.issn1000-3762.2020.05.003CrossRef

76.

Di HX, Wang H, Lyu YS et al (2021) Kinetics simulation of the abrasives grain ordered arrangement oilstone in superfinishing uniform texture surface process. Mach Tool Hydr 49(2):10–14. https://doi.org/10.3969/j.issn.1001-3881.2021.02.003CrossRef

77.

Di HX (2020) Study on several problems of superfinishing structured surface by ordered abrasive oilstone. Master thesis, Shenyang Ligong University.

78.

Yao WF, Liu JW, Huang J et al (2022) Improvement of roundness in centerless finishing of bearing steel rollers by taguchi method in experiments and simulation. Int J Adv Manuf Technol 118(9-10):2853–2872. https://doi.org/10.1007/s00170-021-08020-3CrossRef

79.

Yao WF, Chu QQ, Lyu BH et al (2022) Modeling of material removal based on multi-scale contact in cylindrical polishing. Int J Mech Sci 223:107287. https://doi.org/10.1016/j.ijmecsci.2022.107287CrossRef

80.

Hu YT (2010) Study on electrochemical-mech finishing of bearing roller. Master thesis, Dalian University of Technology.

81.

Wei ZF, Li L, She DS (2018) Effect of electrochemical mechanical machining on surface quality and convexity of bearing rollers. Surface Technol 47(7):119–124. https://doi.org/10.16490/j.cnki.issn.1001-3660.2018.07.016CrossRef

82.

Wei ZF (2013) Key issues of electrochemical mechanical machining with non-uniform mechanical effect. PhD thesis, Dalian University of Technology.

83.

Xu WJ, Wei ZF, Sun J et al (2012) Surface quality prediction and processing parameter determination in electrochemical mechanical polishing of bearing rollers. Int J Adv Manuf Technol 63(1-4):129–136. https://doi.org/10.1007/s00170-011-3891-4CrossRef

84.

Xu WJ, Wei ZF, Sun J et al (2012) Surface quality prediction and processing parameters determination on electrochemical mechanical finishing of bearing roller. China Mech Eng 5:525–530. https://doi.org/10.3969/j.issn.1004-132X.2012.05004CrossRef

85.

Wei ZF, Zheng XH, Tao B (2013) Research of bearing crown roller-raceway by non-uniform interelectrode gap electrochemical mechanical machining. Mater Des Proc Appl , Parts 1-4(690-693):2475. https://doi.org/10.4028/www.scientific.net/AMR.690-693.2475CrossRef

86.

Zheng XH, Wei ZF, Bin T (2013) Simulation and experimental research of bearing crown roller-raceway by non-uniform time effect electrochemical mechanical machining. Adv Mater Res 721:377–381. https://doi.org/10.4028/www.scientific.net/AMR.721.377CrossRef

87.

Wei ZF, Zhang SW, She DS et al (2021) Study on the effect of electrochemical mechanical machining on surface quality of shaft/bearing parts. J Bohai Univ (Natural Science Edition) 42(1):70–77

88.

Umehara N, Kalpakjian S (1994) Magnetic fluid grinding – a new technique for finishing advanced ceramics. CIRP Annals 43(1):185–188. https://doi.org/10.1016/S0007-8506(07)62192-1CrossRef

89.

Umehara N, Komanduri R (1996) Magnetic fluid grinding of hip-Si₃N₄ rollers. Wear 192(1):85–93. https://doi.org/10.1016/0043-1648(95)06763-9CrossRef

90.

Komanduri R, Hou ZB, Umehara N et al (1999) A “gentle” method for finishing Si₃N₄ balls for hybrid bearing applications. Tribol Lett 7(1):39–49. https://doi.org/10.1023/A:1019144630946CrossRef

91.

Umehara N, Kirtane T, Gerlick R et al (2005) A new apparatus for finishing large size/large batch silicon nitride (Si₃N₄) balls for hybrid bearing applications by magnetic float polishing (MFP). Int J Mach Tools Manuf 46(2):151–169. https://doi.org/10.1016/j.ijmachtools.2005.04.015CrossRef

92.

Umehara N, Kato K (1996) Magnetic fluid grinding of advanced ceramic balls. Wear 200(1):148–153. https://doi.org/10.1016/S0043-1648(96)07297-3CrossRef

93.

Childs THC, Mahmood S, Yoon HJ (1995) Magnetic fluid grinding of ceramic balls. Tribol Int 28(6):341–348. https://doi.org/10.1016/0301-679X(95)00018-YCrossRef

94.

Yang WF (2015) Study on processing method for high precision bearing rollers with high consistency based on uniform distribution of cylindrical processing trajectory. PhD thesis, Zhejiang University of Technology.

95.

Yuan JL, Yao WF, Zhao P et al (2015) Kinematics and trajectory of both-sides cylindrical lapping process in planetary motion type. Int J Mach Tools Manuf 92:60–71. https://doi.org/10.1016/j.ijmachtools.2015.02.004CrossRef

96.

Yao WF, Yuan JL, Jiang L et al (2018) Study on both-side cylindrical ultra-precision lapping and polishing processes in eccentric rotations. China Mech Eng 29(19):2327–2334. https://doi.org/10.3969/j.issn.1004⁃132X.2018.19.009CrossRef

97.

Cheng ZD, Yao WF, Zheng B et al (2015) Effect of motion types on cylindrical surface topography. Surface Technol 44(10):117–123. https://doi.org/10.16490/j.cnki.issn.1001-3660.2015.10.020CrossRef

98.

Su J, Yuan JL, Zhang S et al (2018) Experiment on optimization of lapping cylindrical roller. Diamond and Abrasives. Engineering 38(2):82–88. https://doi.org/10.13394/j.cnki.jgszz.2018.2.0017CrossRef

99.

Zhang CT (2017) Research on the processing equipment of high precision double plane cylindrical roller. Master thesis, Zhejiang University of Technology.

100.

Jiang L, Yao WF, He YY et al (2016) An experimental investigation of double-side processing of cylindrical rollers using chemical mechanical polishing technique. Int J Adv Manuf Technol 82(1-4):523–534. https://doi.org/10.1007/s00170-015-7370-1CrossRef

101.

He YL (2015) Research on the double disc and eccentric straight groove lapping method for cylindrical roller. Master thesis, Tianjin University.

102.

Cai ZJ (2017) Design of circulatory system for roller cylindrical surface processing with double-disc straight groove lapping process. Master thesis, Tianjin University.

103.

Deng XF, Ren CZ, Chen Y et al (2020) Research on material selection of lapping tools for double-disc and linear-groove lapping method based on friction and wear experiment. Chinese J Eng Des 27(6):720–728. https://doi.org/10.3785/j.issn.1006-754X.2020.00.086CrossRef

104.

Chen Y, Ren CZ, Deng XF et al (2021) Research on rotating motion of cylindrical roller based on double-disc straight groove grinding. Chinese J Eng Des 28(2):179–189. https://doi.org/10.3785/j.issn.1006-754X.2021.00.008CrossRef

105.

Chen Y (2020) Research on rotating motion of cylindrical roller based on double disc straight groove grinding. Master thesis, Tianjin University.

106.

He QS, He CL, Chen G et al (2021) Analysis and experiments of stable rotation conditions for cylindrical rollers in double disc straight groove lapping. China Mech Eng 32(21):2625–2634. https://doi.org/10.3969/j.issn.1004-132X.2021.21.012CrossRef

107.

Yang L, Ren CZ (2019) Simulation and propulsion experimental analysis of electromagnetic propulsion device for cylindrical roller. Chinese J Eng Des 26(5):611–618. https://doi.org/10.3785/j.issn.1006-754X.2019.05.015CrossRef

108.

Li M, Lyu BH, Yuan JL et al (2015) Shear-thickening polishing method. Int J Mach Tools Manuf 94:88–99. https://doi.org/10.1016/j.ijmachtools.2015.04.010CrossRef

109.

Li M, Yuan JL, Lyu BH et al (2017) Shear-thickening polishing of Si₃N₄ Ceramics. J Mech Eng 53(9):193–200. https://doi.org/10.3901/JME.2017.09.193CrossRef

110.

Chen SH, Lyu BH, He QK et al (2019) Simulation and experimental study on material removal function of shear thickening polishing cylindrical surface. Surface Technol 48(10):355–362. https://doi.org/10.16490/j.cnki.issn.1001-3660.2019.10.044CrossRef

111.

Li M (2015) Fundamental research on shear-thickening polishing method. PhD thesis, Hunan University.

112.

Li M, Lyu BH, Yuan JL et al (2016) Material removal mathematics model of shear thickening polishing. J Mech Eng 52(7):142–151. https://doi.org/10.3901/JME.2016.07.142CrossRef

113.

Li M, Yuan JL, Lyu BH (2015) Preparation of shear thickening polishing abrasive slurries and their polishing properties. Optics Precis Eng 9:2513–2521. https://doi.org/10.3788/OPE.20152309.2513CrossRef

114.

Dai WT, Lyu BH, Weng HZ et al (2015) Experiments on the effects of acoustic properties in acoustic assisted shear thickening polishing. International Manufacturing Conference In China, Hangzhou

115.

Dai WT (2016) Study on high efficiency acoustic assisted shear thickening polishing method. Master thesis, Zhejiang University of Technology.

116.

Dai WT, Lyu BH, Weng HZ et al (2016) Optimization experiment of acoustic assisted shear thickening polishing of cylindrical surface. Surface Technol 2:188–193. https://doi.org/10.16490/j.cnki.issn.1001-3660.2016.02.030CrossRef

117.

Li M, Liu MH, Riemer O et al (2021) Origin of material removal mechanism in shear thickening-chemical polishing. Int J Mach Tools Manuf 170:103800. https://doi.org/10.1016/j.ijmachtools.2021.103800CrossRef

118.

He QK (2019) Research on force-induced rheological polishing slurry based on material characteristics of cemented carbide. Master thesis, Zhejiang University of Technology.

119.

Tang C (2019) Study on preparation and properties of polishing slurry with shear thickening and chemical effect. Master thesis, Hunan University of Science and Technology.

120.

Weng HZ (2017) Basic study on high efficiency electrolysis compounded shear thickening polishing method. Master thesis, Zhejiang University of Technology.

121.

Zhou DD, Huang XM, Ming Y et al (2021) Material removal characteristics of magnetic-field enhanced shear thickening polishing technology. J Mater Res Technol 15:2697–2710. https://doi.org/10.1016/j.jmrt.2021.09.092CrossRef

122.

Yang SQ, Li WH, Chen HL et al (2011) Surface finishing theory and new technology. National Defense Industry Press, Beijing. https://doi.org/10.16490/j.cnki.issn.1001-3660.2019.10.002CrossRef

123.

Yang SQ, Li WH, Li XH et al (2019) Research development of mass finishing for high-performance parts. Surface Technol 48(10):13–24

124.

Hashimoto Y, Ito T, Nakayama Y et al (2021) Fundamental investigation of gyro finishing experimental investigation of contact force between cylindrical workpiece and abrasive media under dry condition. Precis Eng 67:123–136. https://doi.org/10.1016/j.precisioneng.2020.09.009CrossRef

125.

Frechette M, Sroka G, Bell M (2012) High speed, automatable superfinishing of rear-axle hypoid gears. SAE 2012 World Congress & Exhibition. Detroit, Michigan, USA

126.

Chang C, Ma Z, Yang SQ et al (2019) Investigation into the surface integrity of crankshaft by barrel finishing. Proc Inst Mech Eng , Part E: J Proc Mech Eng 235(6):2019–2026. https://doi.org/10.1177/09544089211026865CrossRef

127.

Boschetto A, Bottini L, Macera L et al (2020) Post-processing of complex SLM parts by barrel finishing. Appl Sci 10(4):1382. https://doi.org/10.3390/app10041382CrossRef

128.

Eifler M, Garretson I, Linke B et al (2019) Effects of vibratory finishing of 304 stainless steel samples on areal roughness parameters: a correlational analysis for anisotropy parameters. J Mater Proc Technol 273:116256. https://doi.org/10.1016/j.jmatprotec.2019.116256CrossRef

129.

Bergs T, Müller U, Barth S et al (2021) Experimental analysis on vibratory finishing of cemented carbides. Manuf Lett 28:21–24. https://doi.org/10.1016/j.mfglet.2021.02.004CrossRef

130.

Plichta J, Juniewicz M (2020) Research on the influence of workpiece orientation during processing in disc centrifugal machine on the geometrical structure of its surface and processing efficiency. J Mech Energy Eng 4(44):221–226. https://doi.org/10.30464/jmee.2020.4.3.221CrossRef

131.

Hernandez-Garcia C, Bullard D, Hannon F et al (2017) High voltage performance of a dc photoemission electron gun with centrifugal barrel-polished electrodes. Rev Sci Instrum 88(9):093303. https://doi.org/10.1063/1.4994794CrossRefPubMed

132.

Li XH, Li WH, Yang SQ et al (2018) Study on polyurethane media for mass finishing process: dynamic characteristics and performance. Int J Mech Sci 138:250–261. https://doi.org/10.1016/j.ijmecsci.2018.02.017CrossRef

133.

Han W (2001) Application of Rolling Element Polishing Technology in Practical Production. Bearing 8:21–23

134.

Liu CJ, Chu ZF (2003) Application of Polishing technology in surface machining of bearing rollers. Bearing Indust 12:30–32

135.

Wu GS, Zhang Y (2005) Application of polishing technology in bearings roller process. J Harbin Bearing 26(1):12-13, 15

136.

Hashimoto F, Yamaguchi H, Krajnik P et al (2016) Abrasive fine-finishing technology. CIRP Annals-Manuf Technol 65(2):597–620. https://doi.org/10.1016/j.cirp.2016.06.003CrossRef

137.

Li XH, Wang XF, Yang YB et al (2022) A multi-chamber ultra-precision centrifugal finishing apparatus and method for bearing rolling element surfaces. China: ZL202210649802.X. https://d.wanfangdata.com.cn/patent/ChJQYXRlbnROZXdTMjAyMjEyMDcSEENOMjAyMjEwNjQ5ODAyLlgaCHlzZ2Zpbjk0

138.

Balan MR, Tufescu A, Cretu SS (2016) A case study on relation between roughness, lubrication and fatigue life of rolling bearings. IOP Conf Series: Mater Sci Eng 147(1):012013. https://doi.org/10.1088/1757-899X/147/1/012013CrossRef

139.

Lorenz SJ, Sadeghi F, Trivedi HK et al (2021) A continuum damage mechanics finite element model for investigating effects of surface roughness on rolling contact fatigue. Int J Fatigue 143:105986. https://doi.org/10.1016/j.ijfatigue.2020.105986CrossRef

140.

Yusof NFM, Ripin ZM (2014) Analysis of surface parameters and vibration of roller bearing. Tribol Trans 57(4):715–729. https://doi.org/10.1080/10402004.2014.895887CrossRef

141.

Yang X, Li YC, Liu GM et al (2019) Effect of surface roughness on elastohydrodynamic lubrication performance of cylindrical roller bearing. Tehnicki vjesnik / Technical Gazette 26(3):710–721. https://doi.org/10.17559/TV-20190104091451CrossRef

142.

Trung D, Nguyen N (2021) Investigation of the surface roughness in infeed centerless grinding of scm435 steel. Int J Automat Technol 15(1):123–130. https://doi.org/10.20965/ijat.2021.p0123CrossRef

143.

Khan ZA, Siddiquee AN, Sheikh MH (2012) Selection of optimal condition for finishing of centreless-cylindrical ground parts using grey relational and principal component analyses. Int J Mater Prod Technol 43(1-4):2–21. https://doi.org/10.1504/IJMPT.2012.047636CrossRef

144.

Sun L (2013) Research on shear thickening mechanism and prescription of non-newtonian polishing slurry. Master thesis, Zhejiang University of Technology.

145.

Dong CC(2015) Research on material removal mechanism of shear thickening polishing and characteristics of polishing slurry. Master thesis, Zhejiang University of Technology.

146.

Khoi PB, Trung DD, Cuong N et al (2015) Research on optimization of plunge centerless grinding process using genetic algorithm and response surface method. Int J Sci Eng Technol 4(3):207–211

147.

Yu YJ, Li JS, Xue YJ (2022) Influence of roundness errors of bearing components on rotational accuracy of cylindrical roller bearings. Sci Rep 12(1):1–17. https://doi.org/10.1038/s41598-022-07718-yCrossRef

148.

Huang J, Li CY, Chen BK (2021) Mechanical behaviors of cross roller bearings with raceway roundness error. J Central South Univ 28(7):2091–2104. https://doi.org/10.1007/s11771-021-4755-1CrossRef

149.

Liu J, Li XB, Yu WN (2020) Vibration analysis of the axle bearings considering the combined errors for a high-speed train. Proc Inst Mech Eng , Part K: J Multi-body Dyn 234(3):481–497. https://doi.org/10.1177/1464419320917235CrossRef

150.

Bu JZ (2020) Study on the influence of inner ring roundness error on vibration in cylindrical roller bearings. Mach China (18):59–61

151.

Zheng HW, He HX, He M et al (2014) Determination of superfinishing process parameters for cylindrical rollers D42218N3W. Bearing 10:16–18

152.

Rascalha A, Brandão LC, Ribeiro Filho SLM (2013) Optimization of the dressing operation using load cells and the taguchi method in the centerless grinding process. Int J Adv Manuf Technol 67(5-8):1103–1112. https://doi.org/10.1007/s00170-012-4551-zCrossRef

153.

Xu WP (2018) The evolution of contour form on the rotary surface by centerless grinding and electrochemical superfine composite machining. Master thesis, Dalian Polytechnic University.

154.

Hu L, Zha J, Zhao WH et al (2022) Multi-dimensional controllability analysis of precision ball bearing integrity. Adv Manuf. https://doi.org/10.1007/s40436-022-00424-y

Title: Advance on surface finishing technology of precision bearing cylindrical rollers
Authors: Xingfu Wang
Xiuhong Li
Xiaolong Ma
Wenhui Li
Shengqiang Yang
Publication date: 29-05-2023
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 5-6/2024
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-023-11595-8

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 5-6/2024

Critical depth of cut modeling and ductility domain removal mechanism in elliptical vibration-assisted cutting BK7 optical glass

Mechanism analysis and modeling of surface roughness for CeO2 slurry-enhanced grinding BK7 optics

Magnetic field-assisted finishing: mechanism, application, and outlook

Wire bow analysis based on process parameters in diamond wire sawing

Machinability evolution of gas–liquid-solid three-phase rotary abrasive flow finishing

Tool wear prediction method based on bidirectional long short-term memory neural network of single crystal silicon micro-grinding

Premium Partners