Top

The International Journal of Advanced Manufacturing Technology

Published in:

03-05-2021 | Critical Review

Affecting factors, optimization, and suppression of grinding marks: a review

Authors: Bing Chen, Liang Luo, Haowen Jiao, Shunshun Li, Shichun Li, Zhaohui Deng, Honghui Yao

Published in: The International Journal of Advanced Manufacturing Technology | Issue 1-2/2021

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

Grinding marks is generated on the ground surface after grinding, and it would affect the surface quality, the subsequent polishing process and performance of workpiece. In this paper, the generation mechanism, affecting factors and optimization strategies, and suppression method of grinding marks was summarized. And then, the research trend of grinding marks was pointed out. From the review, some facts about grinding marks were clear. First of all, grinding marks are beneficial or detrimental in different occasions. Besides, the formation of grinding marks is affected by a variety of factors, including the type of processed material, wheel vibration, grinding wheel run out error, grains characteristics, surface structure of grinding wheel, relationship of grinding process parameters, and so on. Meantime, the grinding marks could be optimized with a suitable angle to improve the tribological performance of workpiece and suppressed to enhance the surface quality by truing wheels, matching grinding parameters, subsequent processing methods, and so on. And then, newer and more optimized and suppressed method of grinding marks should be explored.

next article A review: use of evolutionary algorithm for optimisation of machining parameters

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

Zhang C, Guo B, Zhao Q, Liu H, Wang J, Zhang J (2019) Ultra-precision grinding of AlON ceramics: surface finish and mechanisms. J Eur Ceram Soc 39(13):3668–3676. https://doi.org/10.1016/j.jeurceramsoc.2019.05.005CrossRef

Deng H, Xu Z (2021) Laser dressing of arc-shaped resin-bonded diamond grinding wheels. J Mater Process Technol 288:116884. https://doi.org/10.1016/j.jmatprotec.2020.116884CrossRef

Chen M, Zhao Q, Shen D, Dan L (2005) The critical conditions of brittle–ductile transition and the factors influencing the surface quality of brittle materials in ultra-precision grinding. J Mater Process Technol 168(1):75–82. https://doi.org/10.1016/j.jmatprotec.2004.11.002CrossRef

Couey JA, Marsh ER, Knapp BR, Vallance RR (2008) In-process force monitoring for precision grinding semiconductor silicon wafers. Int J Technol Manag 7(5):430–440. https://doi.org/10.1504/IJMTM.2005.007695CrossRef

Zhu X, Kang R, Dong Z, Guo D (2010) Ultra-precision grinding technology and grinder of silicon wafers. China Mech Eng 21(18):2156–2164

Li L, Jiang Y, Zhang F (2011) A study on the manufacturing system of the axes linked ultra-precision grinding of aspheric surface. Key Eng Mater 487:500–504CrossRef

Wu M, Guo B, He P, Zhao Q (2018) Precision grinding of a microstructured surface on hard and brittle materials by a microstructured coarse-grained diamond grinding wheel. Ceram Int 44(7):8026–8034. https://doi.org/10.1016/j.ceramint.2018.01.243CrossRef

Sazedur Rahman M, Saleh T, Lim HS, Son SM, Rahman M (2008) Development of an on-machine profile measurement system in ELID grinding for machining aspheric surface with software compensation. Int J Mach Tool Manu 48(7/8):887–895. https://doi.org/10.1016/j.ijmachtools.2007.11.005CrossRef

Tawakoli T, Azarhoushang B (2008) Influence of ultrasonic vibrations on dry grinding of soft steel. Int J Mach Tool Manu 48(14):1585–1591. https://doi.org/10.1016/j.ijmachtools.2008.05.010CrossRef

10.

Deng H, Xu Z (2020) Laser-dressing topography and quality of resin-bonded diamond grinding wheels. Opt Lasers Eng 136:106322. https://doi.org/10.1016/j.optlaseng.2020.106322CrossRef

11.

Tawakoli T, Azarhoushang B, Mohammad RM (2009) Ultrasonic assisted dry grinding of 42CrMo4. Int J Adv Manuf Technol 42(9):883–891. https://doi.org/10.1007/s00170-008-1646-7CrossRef

12.

Guo B, Zhao Q (2015) Mechanical truing of V-shape diamond wheels for micro-structured surface grinding. Int J Adv Manuf Technol 78(5):1067–1073. https://doi.org/10.1007/s00170-014-6721-7CrossRef

13.

Chen B, Guo B, Zhao Q (2015) An investigation into parallel and cross grinding of aspheric surface on monocrystal silicon. Int J Adv Manuf Technol 80(5):737–746. https://doi.org/10.1007/s00170-015-7045-yCrossRef

14.

Suzuki H, Okada M, Lin W, Morita S, Yamagata Y, Hanada H, Araki H, Kashima S (2014) Fine finishing of ground DOE lens of synthetic silica by magnetic field-assisted polishing. CIRP Ann Manuf Technol 63(1):313–316. https://doi.org/10.1016/j.cirp.2014.03.027CrossRef

15.

Zhu S, Liu Y, Guo J, Li X (2009) Relationship of grinding textures and surface friction coefficient of common steels. Mater Mech Eng 33(6):31–33. https://doi.org/10.1061/41039(345)45CrossRef

16.

Deng Z, Tao N, Tang H, Wan L, Liu W (2012) Research status and development trend of simulation prediction system for grinding process. Diamond Abras Eng 32(3):64–68

17.

Ding W, Dai C, Yu T, Xu J, Fu Y (2017) Grinding performance of textured monolayer CBN wheels: undeformed chip thickness nonuniformity modeling and ground surface topography prediction. Int J Mach Tool Manu 122:66–80. https://doi.org/10.1016/j.ijmachtools.2017.05.006CrossRef

18.

Lin X, Liu J, Ke X, Guo Y (2016) Investigation of waviness error in surface grinding of large axisymmetric aspheric lenses. Proc Inst Mech Eng B J Eng 230(7):1195–1202. https://doi.org/10.1177/0954405415624638CrossRef

19.

Solhtalab A, Adibi H, Esmaeilzare A, Rezaei SM (2019) Cup wheel grinding-induced subsurface damage in optical glass BK7: an experimental, theoretical and numerical investigation. Int J Precis Eng Manuf 57:162–175. https://doi.org/10.1016/j.precisioneng.2019.04.003CrossRef

20.

Brinksmeier E, Mutlugünes Y, Klocke F, Aurich LC, Shore P, Ohmori H (2010) Ultra-precision grinding. CIRP Ann Manuf Technol 59(2):652–671. https://doi.org/10.1016/j.cirp.2010.05.001CrossRef

21.

Zhang L, Chen P, An T, Dai Y, Qin F (2019) Analytical prediction for depth of subsurface damage in silicon wafer due to self-rotating grinding process. Curr Appl Phys 19(5):570–581. https://doi.org/10.1016/j.cap.2019.02.015CrossRef

22.

Jiang C, Cheng J, Wu T (2017) Theoretical model of brittle material removal fraction related to surface roughness and subsurface damage depth of optical glass during precision grinding. Int J Precis Eng Manuf 49:421–427. https://doi.org/10.1016/j.precisioneng.2017.04.004CrossRef

23.

Zhang Z, Huo F, Wu Y, Huang H (2011) Grinding of silicon wafers using an ultrafine diamond wheel of a hybrid bond material. Int J Mach Tool Manu 51(1):18–24. https://doi.org/10.1016/j.ijmachtools.2010.10.006CrossRef

24.

Sedlaček M, Podgornik B, Vižintin J (2012) Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces. Tribol Int 48:102–112. https://doi.org/10.1016/j.triboint.2011.11.008CrossRef

25.

Yue H, Deng J, Zhang Y, Meng Y, Zou X (2020) Characterization of the textured surfaces under boundary lubrication. Tribol Int 151:106359. https://doi.org/10.1016/j.triboint.2020.106359CrossRef

26.

Bigerelle M, Najjar D, Iost A (2003) Relevance of roughness parameters for describing and modelling machined surfaces. J Mater Sci 38(11):2525–2536. https://doi.org/10.1023/A:1023929807546CrossRef

27.

Zhou L, Tian Y, Huang H, Sato H, Shimizu J (2012) A study on the diamond grinding of ultra-thin silicon wafers. Proc Inst Mech Eng B J Eng 226(1):66–75. https://doi.org/10.1177/0954405411414768CrossRef

28.

Chao C, Yang S, Xiu S (2011) Characteristics of the point grinding surface texture and its effects on evaluation parameters of the surface roughness. J Northeast Univ 32(6):846–849. https://doi.org/10.1080/17415993.2010.547197CrossRef

29.

Sedlaček M, Gregorčič P, Podgornik B (2017) Use of the roughness parameters Ssk and Sku to control friction-a method for designing surface texturing. Tribol Trans 60(2):260–266. https://doi.org/10.1080/10402004.2016.1159358CrossRef

30.

Sedlacek M, Podgornik B, Vizintin J (2012) Planning surface texturing for reduced friction in lubricated sliding using surface roughness parameters skewness and kurtosis. Proc Inst Mech Eng J J Eng 226(8):661–667. https://doi.org/10.1177/1350650112439809CrossRef

31.

Chen B, Li S, Deng Z, Guo B, Zhao Q (2017) Grinding marks on ultra-precision grinding spherical and aspheric surfaces. Int J Precis Eng Manuf Green Technol 4(4):419–429. https://doi.org/10.1007/s40684-017-0047-5CrossRef

32.

Chen H, Zhou Q, Wan G, Xiao Q (2007) Surface mark simulation of double-side grinding of 300 mm silicon wafer. Chin J Rare Met 31(6):742–745. https://doi.org/10.3969/j.issn.0258-7076.2007.06.004CrossRef

33.

Agarwal S, Venkateswara Rao P (2010) Modeling and prediction of surface roughness in ceramic grinding. Int J Mach Tool Manu 50(12):1065–1076. https://doi.org/10.1016/j.ijmachtools.2010.08.009CrossRef

34.

Pan Y, Zhao Q, Guo B, Chen B, Wang J, Wu X (2020) An investigation of the surface waviness features of ground surface in parallel grinding process. Int J Mech Sci 170:105351. https://doi.org/10.1016/j.ijmecsci.2019.105351CrossRef

35.

Kara F, Iek A, Demir H (2013) Multiple regression and ANN models for surface quality of cryogenically-treated AISI 52100 bearing steel. J Balk Tribol Assoc 19(4):570–584

36.

Wu J, Huang C, Liao C (2003) Fracture strength characterization and failure analysis of silicon dies. Microelectron Reliab 43(2):269–277. https://doi.org/10.1016/S0026-2714(02)00314-1CrossRef

37.

Wang Y, Xu L, Li D, Wang J, Shi L, Hu D (2012) Sphere generation grinding based spherical surface marks analysis. J Shanghai Jiaotong Univ 46(5):740–745

38.

Zheng L, Chen W, Pozzi M, Teng X, Huo D (2019) Modulation of surface wettability by vibration assisted milling. Int J Precis Eng Manuf 55:179–188. https://doi.org/10.1016/j.precisioneng.2018.09.006CrossRef

39.

Tian Y, Jin Z, Kang R, Guo D (2005) Analysis of kinematic geometry on wafer rotation grinding processes. China Mech Eng 16(20):1798–1801. https://doi.org/10.3321/j.issn:1004-132X.2005.20.004CrossRef

40.

Li G, Rahim M, Pan W, Wen C, Ding S (2020) The manufacturing and the application of polycrystalline diamond tools–a comprehensive review. J Manuf Process 56:400–416. https://doi.org/10.1016/j.jmapro.2020.05.010CrossRef

41.

Jiang J, Sun S, Wang D, Yang Y, Liu X (2020) Surface texture formation mechanism based on the ultrasonic vibration-assisted grinding process. Int J Mach Tool Manu 156:103595. https://doi.org/10.1016/j.ijmachtools.2020.103595CrossRef

42.

Wos S, Koszela W, Pawlus P (2020) The effect of graphite surface texturing on the friction reduction in dry contact. Tribol Int 151:106535. https://doi.org/10.1016/j.triboint.2020.106535CrossRef

43.

Varenberg M, Halperin G, Etsion I (2002) Different aspects of the role of wear debris in fretting wear. Wear 252(11):902–910. https://doi.org/10.1016/S0043-1648(02)00044-3CrossRef

44.

Volchok A, Halperin G, Etsion I (2002) The effect of surface regular microtopography on fretting fatigue life. Wear 253(3):509–515. https://doi.org/10.1016/S0043-1648(02)00148-5CrossRef

45.

Wos S, Koszela W, Pawlus P (2017) The effect of both surfaces textured on improvement of tribological properties of sliding elements. Tribol Int 113:182–188. https://doi.org/10.1016/j.triboint.2016.10.044CrossRef

46.

Wang X, Shi L, Dai Q, Huang W, Wang X (2018) Multi-objective optimization on dimple shapes for gas face seals. Tribol Int 123:216–223. https://doi.org/10.1016/j.triboint.2018.03.011CrossRef

47.

Podgornik B, Vilhena L, Sedlaček M, Rek Z, Žun I (2012) Effectiveness and design of surface texturing for different lubrication regimes. Meccanica 47(7):1613–1622. https://doi.org/10.1007/s11012-012-9540-7CrossRefMATH

48.

Liu C, Zhang L (2004) Selection and effect of parts surface roughness. Mod Mach Manuf Eng 2:114–115. https://doi.org/10.3969/j.issn.1671-3133.2004.02.043CrossRef

49.

Li J, Zhu H (2009) Surface texture and its influence on tribological properties. Lubr Oil 34(2):94–97. https://doi.org/10.3969/j.issn.0254-0150.2009.02.028CrossRef

50.

Lu H, Wen J, Xiu S, Deng Y (2016) Analysis of multi-scale point grinding surface texture features and tribological properties. Mach Des Manuf 7:93–95. https://doi.org/10.3969/j.issn.1001-3997.2016.07.024CrossRef

51.

Chen S, Cheung C, Zhang F (2018) An experimental and theoretical analysis of surface generation in the ultra-precision grinding of hard and brittle materials. Int J Adv Manuf Technol 97(5):2715–2729. https://doi.org/10.1007/s00170-018-2121-8CrossRef

52.

Bhaduri D, Soo S, Aspinwall D, Novovic D, Harden P, Bohr S, Martin D (2012) A study on ultrasonic assisted creep feed grinding of nickel based superalloys. Procedia CIRP 1(1):359–364. https://doi.org/10.1016/j.procir.2012.04.064CrossRef

53.

Chen H, Tang J, Zhou W (2013) An experimental study of the effects of ultrasonic vibration on grinding surface roughness of C45 carbon steel. Int J Adv Manuf Technol 68(9):2095–2098. https://doi.org/10.1007/s00170-013-4824-1CrossRef

54.

Curtis D, Soo S, Aspinwall D, Mantle A (2016) Evaluation of workpiece surface integrity following point grinding of advanced titanium and nickel based alloys. Procedia CIRP 45:47–50. https://doi.org/10.1016/j.procir.2016.02.343CrossRef

55.

Zhao L, Zhao Q, Jin G, Kang X, Xin X (2013) Precision grinding of BK7 glasses using conditioned coarse-grained diamond wheel. Proc Inst Mech Eng B J Eng Manuf 227(10):1571–1577. https://doi.org/10.1177/0954405413488593CrossRef

56.

Zhang Q, Zhao Q, To S, Guo B (2017) Application of X- ray diffraction to study the grinding induced surface damage mechanism of WC/Co. Int J Refract Met Hard Mater 64:205–209. https://doi.org/10.1016/j.ijrmhm.2016.11.006CrossRef

57.

Liu Q, Huang G, Xu X, Fang C, Cui C (2018) Influence of grinding fiber angles on grinding of the 2D–Cf /C–SiC composites. Ceram Int 44(11):12774–12782. https://doi.org/10.1016/j.ceramint.2018.04.083CrossRef

58.

Jiang X, Guo M, Li B (2018) Active control of high-frequency tool-workpiece vibration in micro-grinding. Int J Adv Manuf Technol 94(1):1429–1439. https://doi.org/10.1007/s00170-017-1015-5CrossRef

59.

Yan Y, Xu J, Wiercigroch M (2016) Regenerative chatter in self-interrupted plunge grinding. Meccanica 51(12):3185–3202. https://doi.org/10.1007/s11012-016-0554-4MathSciNetCrossRef

60.

Hassui A, Diniz A (2003) Correlating surface roughness and vibration on plunge cylindrical grinding of steel. Int J Mach Tool Manu 43(8):855–862. https://doi.org/10.1016/S0890-6955(03)00049-XCrossRef

61.

Kuriyagawa T, Yosihara N, Wu Y, Syoji K (2001) Formation of vertical striped pattern on the ground surface in high-reciprocation profile grinding. Int J Jpn Soc Precis Eng 67(8):1316–1320. https://doi.org/10.2493/jjspe.67.1316CrossRef

62.

Cao H, Dörgeloh T, Riemer O, Brinksmeier E (2017) Adaptive separation of unbalance vibration in air bearing spindles. Procedia CIRP 62:357–362. https://doi.org/10.1016/j.procir.2016.06.069CrossRef

63.

Inasaki I, Karpuschewski B, Lee H (2001) Grinding chatter–origin and suppression. CIRP Ann Manuf Technol 50(2):515–534. https://doi.org/10.1016/S0007-8506(07)62992-8CrossRef

64.

Chen S, Cheung C, Zhang F, Zhao C (2018) Three-dimensional modelling and simulation of vibration marks on surface generation in ultra-precision grinding. Int J Precis Eng Manuf 53:221–235. https://doi.org/10.1016/j.precisioneng.2018.04.006CrossRef

65.

Chen S, Cheung C, Zhao C, Zhang F (2017) Simulated and measured surface roughness in high-speed grinding of silicon carbide wafers. Int J Adv Manuf Technol 91(1-4):719–730. https://doi.org/10.1007/s00170-016-9805-8CrossRef

66.

Chen J, Fang Q, Li P (2015) Effect of grinding wheel spindle vibration on surface roughness and subsurface damage in brittle material grinding. Int J Mach Tool Manu 91:12–23. https://doi.org/10.1016/j.ijmachtools.2015.01.003CrossRef

67.

Cao Y, Guan J, Li B, Chen X, Yang J, Gan C (2013) Modeling and simulation of grinding surface topography considering wheel vibration. Int J Adv Manuf Technol 66(5):937–945. https://doi.org/10.1007/s00170-012-4378-7CrossRef

68.

Huo F, Kang R, Li Z, Guo D (2013) Origin, modeling and suppression of grinding marks in ultra-precision grinding of silicon wafers. Int J Mach Tool Manu 66:54–65. https://doi.org/10.1016/j.ijmachtools.2012.11.006CrossRef

69.

Lang X, He Y, Tang J, Chen H (2014) Grinding force model based on prominent height of abrasive submitted to Rayleigh distribution. J Cent South Univ 45(10):3386–3391

70.

Hou Z, Komanduri R (2003) On the mechanics of the grinding process-Part I. Stochastic nature of the grinding process. Int J Mach Tool Manu 43(15):1579–1593. https://doi.org/10.1016/S0890-6955(03)00186-XCrossRef

71.

Huo F, Guo D, Kang R, Feng G (2012) Nanogrinding of SiC wafers with high flatness and low subsurface damage. J Trans Nonferrous Metal Soc 22(12):3027–3033. https://doi.org/10.1016/S1003-6326(11)61566-5CrossRef

72.

Zhao Q, Yu G, Ekkard B, Oltmann R, Kal R (2006) Ultra—precision grinding of BK7 optical glass using coarse-grained electroplated diamond wheel. Chin J Mech Eng 42(10):95–101. https://doi.org/10.3321/j.issn:0577-6686.2006.10.016CrossRef

73.

Zhao Q, Yao J, Chen J (2009) ELID assisted grinding of optical glass with fine and coarse grained copper-resin bonded. Adv Mater Res 76-78:76–81. https://doi.org/10.4028/www.scientific.net/AMR.76-78.76CrossRef

74.

Zhao Q, Chen J, Huang H, Fang X (2011) Grinding damage of BK7 using copper-resin bond coarse-grained diamond wheel. Int J Precis Eng Manuf 12(1):5–13. https://doi.org/10.1007/s12541-011-0001-3CrossRef

75.

Wu M, Guo B, Zhao Q, He P (2008) Precision grinding of a microstructured surface on hard and brittle materials by a microstructured coarse-grained diamond grinding wheel. Ceram Int 44(7):8026–8034. https://doi.org/10.1016/j.ceramint.2018.01.243CrossRef

76.

Zhao Q, Guo B (2015) Ultra-precision grinding of optical glasses using mono-layer nickel electroplated coarse-grained diamond wheels. Part 1: ELID assisted precision conditioning of grinding wheels. Precis Eng 39:56–66. https://doi.org/10.1016/j.precisioneng.2014.07.006CrossRef

77.

Zhao Q, Guo B (2015) Ultra-precision grinding of optical glasses using mono-layer nickel electroplated coarse-grained diamond wheels. Part 2: Investigation of profile and surface grinding. Precis Eng 39:67–78. https://doi.org/10.1016/j.precisioneng.2014.07.007CrossRef

78.

Zhao G, Lv Y, Li Y, Li W (2018) Simulation of the surface roughness with grinding wheel of ordered abrasive pattern. Mach Des Manuf 3:223–225. https://doi.org/10.3969/j.issn.1001-3997.2018.03.066CrossRef

79.

Guo B, Jin Q, Zhao Q, Wu M, Zeng Z (2016) Research progress of grinding technology with surface structured wheels. J Harbin Inst Technol 48(7):1–13. https://doi.org/10.11918/j.issn.0367-6234.2016.07.001CrossRef

80.

Oliveira J, Bottene A, França T (2010) A novel dressing technique for texturing of ground surfaces. J CIRP Ann Manuf Technol 59(1):361–364. https://doi.org/10.1016/j.cirp.2010.03.119CrossRef

81.

Stȩpień P (2009) Regular surface texture generated by special grinding process. J Manuf Sci E T ASME 131(1):123–136. https://doi.org/10.1115/1.3070511CrossRef

82.

Stepien P (2008) Mechanism of grinding wheel surface reproduction in regular surface texture generation. Surf Eng 24(3):219–225. https://doi.org/10.1179/174329408X282596CrossRef

83.

Stepien P (2011) Deterministic and stochastic components of regular surface texture generated by a special grinding process. Wear 271(3):514–518. https://doi.org/10.1016/j.wear.2010.03.027CrossRef

84.

Shan J, Xu L, Hu D (2016) Sphericity error estimation method based on spherical grinding marks. J Shanghai Jiaotong Univ 50(5):654–659. https://doi.org/10.16183/j.cnki.jsjtu.2016.05.002CrossRef

85.

Hou H, Jiang T, Hu D (2011) Space trajectory analysis and parameter selection on large spherical precision grinding. China Mech Eng 22(7):757–761

86.

Hou H, Li D, Wei C, Hu D, Xu K (2011) Process optimization in two spherical surface grinding processes using trajectories analysis. Proc Inst Mech Eng B J Eng Manuf 225(12):2177–2188. https://doi.org/10.1177/0954405411411404CrossRef

87.

Trmal G, Holesovsky F (2001) Wave-shift and its effect on surface quality in super-abrasive grinding. Int J Mach Tool Manuf 41(7):979–989. https://doi.org/10.1016/S0890-6955(00)00116-4CrossRef

88.

Chen Z, Wei X, Ren Q, Xie X (2009) Analysis and simulation of grinding motion on large size wafer self-rotating grinding. Diamond Abras Eng 2009(5):1–12. https://doi.org/10.3969/j.issn.1006-852X.2009.05.001CrossRef

89.

Hwang Y, Ha K, Kim Y, Kim J, Lee S (2016) Suppression of the inflection pattern in ultraprecision grinding through the minimization of the hydrodynamic force using a toothed wheel. Int J Mach Tool Manuf 100:105–115. https://doi.org/10.1016/j.ijmachtools.2015.10.009CrossRef

90.

Sun W, Pei Z, Fisher G (2005) Fine grinding of silicon wafers: effects of chuck shape on grinding marks. Int J Mach Tool Manuf 45(6):673–686. https://doi.org/10.1016/j.ijmachtools.2004.09.020CrossRef

91.

Wang S, Hu Y, Feng Z (2010) Effect of surface roughness on sliding friction in lubricated contacts-reciprocal experiment study. Mod Manuf Eng 2010(3):21–24. https://doi.org/10.3969/j.issn.1671-3133.2010.03.007CrossRef

92.

Menezes P, Kishore KS (2006) Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. Mater Sci Eng A Struct 429(1):149–160. https://doi.org/10.1016/j.msea.2006.05.080CrossRef

93.

Chao C, Wang H, Kong N, Xiu S (2014) Point-grinding texture characteristics and its influence on tribological property of parts. Lubr Eng 39(9):4–7. https://doi.org/10.3969/j.issn.0254-0150.2014.09.002CrossRef

94.

Du Y, Zhang K (2017) Influence of grinding textures on tribological property and lubricating oil matching based on finite element simulation. Surf Technol 46(7):122–127. https://doi.org/10.16490/j.cnki.issn.1001-3660.2017.07.020CrossRef

95.

Zhang Y, Guo Y, Zhuang S (2003) Influence of chatter vibration on the ultreprecision machining accuracy of aspheric surface. Diamond Abras Eng 3:17–20. https://doi.org/10.3969/j.issn.1006-852X.2003.03.004CrossRef

96.

Chidambaram S, Pei Z, Kassir S (2003) Fine grinding of silicon wafers: a mathematical model for grinding marks. Int J Mach Tool Manuf 43(15):1595–1602. https://doi.org/10.1016/S0890-6955(03)00187-1CrossRef

97.

Pei Z, Alan S (2002) Fine grinding of silicon wafers: designed experiments. Int J Mach Tool Manu 42(3):395–404. https://doi.org/10.1016/S0890-6955(01)00123-7CrossRef

98.

Wang Y, Liu K, Ning J, Zhang Z (2016) Experimental analysis on grinding burn for bearing rings raceway made of G95 Cr18. Bearing 12:23–27. https://doi.org/10.3969/j.issn.1000-3762.2016.12.007CrossRef

99.

Lin X, Ma K, Huang H, Xu Q (2015) Distribution characteristics of surface roughness and waviness error in axisymmetric aspheric grinding. High Power Laser Part Beams 27(9):155–159. https://doi.org/10.11884/HPLPB201527.092013CrossRef

100.

Gao S, Kang R, Dong Z, Guo D (2013) Subsurface damage distribution in silicon wafers ground with wafer rotation grinding method. J Mech Eng 49(3):88–94. https://doi.org/10.3901/JME.2013.03.088CrossRef

Title: Affecting factors, optimization, and suppression of grinding marks: a review
Authors: Bing Chen
Liang Luo
Haowen Jiao
Shunshun Li
Shichun Li
Zhaohui Deng
Honghui Yao
Publication date: 03-05-2021
Publisher: Springer London
Published in: The International Journal of Advanced Manufacturing Technology / Issue 1-2/2021
Print ISSN: 0268-3768
Electronic ISSN: 1433-3015
DOI: https://doi.org/10.1007/s00170-021-07116-0

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1-2/2021

Experimental investigation of the effects of super-elasticity on the machinability of NiTi alloys

GPU accelerated voxel-based machining simulation

Thermal network model and experimental validation for a motorized spindle including thermal–mechanical coupling effect

A memetic algorithm to solve uncertain energy-efficient flow shop scheduling problems

Mitigation of chatter in thin-wall milling by using double-side support device

A similarity-based approach for the variant design of core-pulling mechanism in injection mold design

Premium Partners