Skip to main content
Top
Published in: Microsystem Technologies 10/2020

16-01-2018 | Technical Paper

An efficient power delivering scheme for sensorless drive of Brushless DC motor

Authors: Santanu Mondal, Arijit Majumder, Debjyoti Chowdhury, Madhurima Chattopadhyay

Published in: Microsystem Technologies | Issue 10/2020

Log in

Activate our intelligent search to find suitable subject content or patents.

search-config
loading …

Abstract

This paper presents a photovoltaic (PV) panel fed sensorless Brushless DC motor (BLDC) drive using Sheppard –Taylor (S–T) converter for load matching in order to make the system energy efficient. In this work, a detailed study on S–T converter is done as it helps to stabilize the fluctuating output voltage of standard PV panel. Hence, in this application model, we have considered S–T converter as a feed to the six switch three phase Brushless DC (BLDC) motor drive in which the rotor position is estimated using back electromotive force (EMF) detection technique. This work is developed and studied on MATLAB/Simulink platform as well as in real time implemented hardware. The simulation model has borrowed the motor parameters (viz. stator back-EMF, rotor RPM and max. output torque, etc.) and circuit components from the implemented hardware. Finally, a detailed study of the implemented S–T converter reveals a significant performance improvement over a conventional Buck–Boost converter for same PV panel. The output results show that the scheme described in this scope of work efficiently handles the DC power generated by solar cell using S–T converter as the rotor RPM offset is negligible in closed loop motor drive.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

  • über 102.000 Bücher
  • über 537 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Finance + Banking
  • Management + Führung
  • Marketing + Vertrieb
  • Maschinenbau + Werkstoffe
  • Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

  • über 67.000 Bücher
  • über 390 Zeitschriften

aus folgenden Fachgebieten:

  • Automobil + Motoren
  • Bauwesen + Immobilien
  • Business IT + Informatik
  • Elektrotechnik + Elektronik
  • Energie + Nachhaltigkeit
  • Maschinenbau + Werkstoffe




 

Jetzt Wissensvorsprung sichern!

Literature
go back to reference Celik AN, Acikgoz N (2007) Modelling and experimental verification of the operating current of mono-crystalline photovoltaic modules using four- and five-parameter models. Appl Energy 84:1–15CrossRef Celik AN, Acikgoz N (2007) Modelling and experimental verification of the operating current of mono-crystalline photovoltaic modules using four- and five-parameter models. Appl Energy 84:1–15CrossRef
go back to reference Chakraborty A (2004) Energy conservation in ceiling fans. In: Proceedings of the 13th national power systems conference, Chennai, India. pp 835–838 Chakraborty A (2004) Energy conservation in ceiling fans. In: Proceedings of the 13th national power systems conference, Chennai, India. pp 835–838
go back to reference Chen CH, Cheng MY (2007) A new cost effective sensorless commutation method for Brushless DC motors without phase shift circuit and neutral voltage. IEEE Trans Power Electron 22(2):644–653CrossRef Chen CH, Cheng MY (2007) A new cost effective sensorless commutation method for Brushless DC motors without phase shift circuit and neutral voltage. IEEE Trans Power Electron 22(2):644–653CrossRef
go back to reference Chowdhury D, Chattopadhyay M, Roy P (2013) Modelling and simulation of cost effective sensorless drive for Brushless DC motor. In: International conference on computational intelligence: modelling, techniques and applications (CIMTA-2013), vol 10. Procedia Technology, pp 279–286 Chowdhury D, Chattopadhyay M, Roy P (2013) Modelling and simulation of cost effective sensorless drive for Brushless DC motor. In: International conference on computational intelligence: modelling, techniques and applications (CIMTA-2013), vol 10. Procedia Technology, pp 279–286
go back to reference De la Rue du Can S, Letschert VE, McNeil MA, Zhou N, Sathaye J (2009) Residential and transport energy use in India: past trend and future outlook. LBNL De la Rue du Can S, Letschert VE, McNeil MA, Zhou N, Sathaye J (2009) Residential and transport energy use in India: past trend and future outlook. LBNL
go back to reference Gupta RA, Kumar R, Bansal AK (2009) Artificial intelligence applications in permanent magnet Brushless DC motor drives. Published online: 25 December 2009© Springer Science + Business Media B.V Gupta RA, Kumar R, Bansal AK (2009) Artificial intelligence applications in permanent magnet Brushless DC motor drives. Published online: 25 December 2009© Springer Science + Business Media B.V
go back to reference Jaiswal S, Chowdhury D, Chattopadhyay M (2014) Performance analysis of sensored and sensorless drive of BLDC motor using different typs of DC/DC converters in MATLAB/Simulink platform. In: Proceedings of ITR international conference, Bhubaneswar, 06th April 2014, ISBN: 978-93-84209-02-5 Jaiswal S, Chowdhury D, Chattopadhyay M (2014) Performance analysis of sensored and sensorless drive of BLDC motor using different typs of DC/DC converters in MATLAB/Simulink platform. In: Proceedings of ITR international conference, Bhubaneswar, 06th April 2014, ISBN: 978-93-84209-02-5
go back to reference Jinghua Z, Zhengxi L (2008) Research on hybrid modulation strategies based on general hybrid topology of multilevel inverter. In: Proceedings of international symposium on, electrical drives, motion. Ischia (Italy) Jinghua Z, Zhengxi L (2008) Research on hybrid modulation strategies based on general hybrid topology of multilevel inverter. In: Proceedings of international symposium on, electrical drives, motion. Ischia (Italy)
go back to reference Kim TH, Ehsani M (2004) Sensorless control of the BLDC motors from near-zero to high speeds. IEEE Trans Power Electron 19(6):1635–1645CrossRef Kim TH, Ehsani M (2004) Sensorless control of the BLDC motors from near-zero to high speeds. IEEE Trans Power Electron 19(6):1635–1645CrossRef
go back to reference Liu CS, Hwang JC, Chen LR, Fu CC (2009) Development of new structure of Brushless DC servo motor for ceiling fan. In: Industrial electronics and applications, ICIEA 2009. 4th IEEE conference on, 25–27 May 2009. pp 2640–2643 Liu CS, Hwang JC, Chen LR, Fu CC (2009) Development of new structure of Brushless DC servo motor for ceiling fan. In: Industrial electronics and applications, ICIEA 2009. 4th IEEE conference on, 25–27 May 2009. pp 2640–2643
go back to reference Majdinasab H, Attar MZ, Moosavyan I (2014) Implementation sinusoidal pulse width modulation (SPWM) in three level inverters for hybrid PV/wind system Majdinasab H, Attar MZ, Moosavyan I (2014) Implementation sinusoidal pulse width modulation (SPWM) in three level inverters for hybrid PV/wind system
go back to reference Mondal S, Mitra A, Chattopadhyay M (2015) Mathematical modeling and simulation of Brushless DC motor with ideal back EMF for a precision speed control. In: IEEE international conference on electrical, computer and communication technologies (ICECCT-2015) ISBN: 978-1-4799-6084-2 Mondal S, Mitra A, Chattopadhyay M (2015) Mathematical modeling and simulation of Brushless DC motor with ideal back EMF for a precision speed control. In: IEEE international conference on electrical, computer and communication technologies (ICECCT-2015) ISBN: 978-1-4799-6084-2
go back to reference Mondal S, Mitra A, Chowdhury D, Chattopadhyay M (2015) A new approach of sensorless control methodology for achieving ideal characteristics of Brushless DC motor using MATLAB/Simulink. In: Third international conference on computer, communication, control and information technology (C3IT), IEEE, New York, 7–8 February 2015, ISBN:978-1-4799-4446-0 Mondal S, Mitra A, Chowdhury D, Chattopadhyay M (2015) A new approach of sensorless control methodology for achieving ideal characteristics of Brushless DC motor using MATLAB/Simulink. In: Third international conference on computer, communication, control and information technology (C3IT), IEEE, New York, 7–8 February 2015, ISBN:978-1-4799-4446-0
go back to reference Niapour SK, Tabarraie M, Feyzi MR (2014) A new robust speed-sensorless control strategy for high-performance Brushless DC motor drives with reduced torque ripple. Control Eng Pract 24:42–54CrossRef Niapour SK, Tabarraie M, Feyzi MR (2014) A new robust speed-sensorless control strategy for high-performance Brushless DC motor drives with reduced torque ripple. Control Eng Pract 24:42–54CrossRef
go back to reference Rezanezhad M, Dargahi M, Lesan S, Noee AR (2008) Sliding mode control of modified Sheppard–Taylor PFC converter. In: Proceedings of the 12th IEEE international multitopic conference, 23–24 December 2008 Rezanezhad M, Dargahi M, Lesan S, Noee AR (2008) Sliding mode control of modified Sheppard–Taylor PFC converter. In: Proceedings of the 12th IEEE international multitopic conference, 23–24 December 2008
go back to reference Samin J et al (1997) Optimal sizing of photovoltaic systems in varied climates. Sol Energy 6(2):97–107CrossRef Samin J et al (1997) Optimal sizing of photovoltaic systems in varied climates. Sol Energy 6(2):97–107CrossRef
go back to reference Tse CK, Chow MHL (1996) Single stage high power factor converter using the Sheppard–Taylor topology. IEEE, New YorkCrossRef Tse CK, Chow MHL (1996) Single stage high power factor converter using the Sheppard–Taylor topology. IEEE, New YorkCrossRef
go back to reference Uoya M, Koizumi H (2015) A calculation method of photovoltaic array’s operating point for MPPT evaluation based on one-dimensional Newton–Raphson method. IEEE Trans Ind Appl 51(1):567–575CrossRef Uoya M, Koizumi H (2015) A calculation method of photovoltaic array’s operating point for MPPT evaluation based on one-dimensional Newton–Raphson method. IEEE Trans Ind Appl 51(1):567–575CrossRef
go back to reference Zhang C, Bian D (2008) A PWM control algorithm for eliminating torque ripple caused by stator magnetic field jump of Brushless DC motors. In: Proceedings of the 7th world congress on intelligent control and automation, Chongqing, China, 25–27 June 2008 Zhang C, Bian D (2008) A PWM control algorithm for eliminating torque ripple caused by stator magnetic field jump of Brushless DC motors. In: Proceedings of the 7th world congress on intelligent control and automation, Chongqing, China, 25–27 June 2008
go back to reference Zhao L, Zhang B, Ma H, Liu X (2005) Research and experiment of Sheppard–Taylor topology. In: Proceedings IECON’05, 06–10 November 2005 Zhao L, Zhang B, Ma H, Liu X (2005) Research and experiment of Sheppard–Taylor topology. In: Proceedings IECON’05, 06–10 November 2005
Metadata
Title
An efficient power delivering scheme for sensorless drive of Brushless DC motor
Authors
Santanu Mondal
Arijit Majumder
Debjyoti Chowdhury
Madhurima Chattopadhyay
Publication date
16-01-2018
Publisher
Springer Berlin Heidelberg
Published in
Microsystem Technologies / Issue 10/2020
Print ISSN: 0946-7076
Electronic ISSN: 1432-1858
DOI
https://doi.org/10.1007/s00542-018-3715-7

Other articles of this Issue 10/2020

Microsystem Technologies 10/2020 Go to the issue