Top

Journal of Materials Engineering and Performance

Published in:

01-02-2011

An Experimental Evaluation of the Temperature Profiles in Super Duplex Pipe Subjected to Induction Heating and Bending

Authors: G. J. Collie, I. Black

Published in: Journal of Materials Engineering and Performance | Issue 1/2011

Activate our intelligent search to find suitable subject content or patents.

search-config

AI-assisted search

Off

Abstract

This article briefly explains the technique of induction heating as applied to thick-walled super duplex pipe. It describes the theoretical temperature distribution which might be expected through the wall of such a pipe. An experiment is outlined that uses thermocouples to determine the actual temperature profiles within the wall of induction-heated pipe. The results of the experiment are given, and identifiable trends are discussed. A second experiment is then performed where the pipe is subjected to induction bending, and again the results are explained and discussed. Apparent discrepancies between theoretical and actual temperature profiles are then explained.

previous article Tensile and Impact Toughness Properties of Gas Tungsten Arc Welded and Friction Stir Welded Interstitial Free Steel Joints

next article Role of the Austenite-Ferrite Transformation Start Temperature on the High-Temperature Ductility of Electrical Steels

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Online-Abonnement

Mit Springer Professional "Wirtschaft+Technik" erhalten Sie Zugriff auf:

über 102.000 Bücher
über 537 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Finance + Banking
Management + Führung
Marketing + Vertrieb
Maschinenbau + Werkstoffe
Versicherung + Risiko

Jetzt Wissensvorsprung sichern!

inform now

Springer Professional "Technik"

Online-Abonnement

Mit Springer Professional "Technik" erhalten Sie Zugriff auf:

über 67.000 Bücher
über 390 Zeitschriften

aus folgenden Fachgebieten:

Automobil + Motoren
Bauwesen + Immobilien
Business IT + Informatik
Elektrotechnik + Elektronik
Energie + Nachhaltigkeit
Maschinenbau + Werkstoffe

Jetzt Wissensvorsprung sichern!

inform now

G.J. Collie and I. Black, An Experimental Evaluation of Induction Bending as a Method of Producing Pipe Bends with Radii < 2.5D, Proc. Inst. Mech. Eng., Part E, 2008, 222, p 103–114CrossRef

G.J. Collie and I. Black, An Investigation into the Mechanical Properties of Super Duplex Stainless Steels at the Elevated Temperatures Expected During Induction Bending, Mater. High Temp., 2007, 24(2), p 103–112CrossRef

G. Frommeyer, H. Hofmann, and J. Löhr, Structural Superplasticity at High Strain Rates of Super Duplex Stainless Steel Fe-25Cr-7Ni-3Mo-0.3N, Steel Res., 2003, 74(5), p 338–344

G.J. Collie and I. Black, Metallurgical Aspects of Induction Bending of Thick-Walled Super Duplex Pipe, Proc. Inst. Mech. Eng., Part L, 2008, 223, p 19–29

W. Li, M. Wang, F. Du, and Z. Xu, FEM Simulation of Large Diameter Pipe Bending Using Local Heating, J. Iron Steel Res. Int., 2006, 13(5), p 25–29CrossRef

Z. Hu and J.Q. Li, Computer Simulation of Pipe-Bending Process with Small Bending Radius Using Local Induction Heating, J. Mater. Process. Technol., 1999, 91, p 75–79CrossRef

Z. Wang and Z. Hu, Theory of Pipe Bending to a Small Radius Using Induction Heating, J. Mater. Process. Technol., 1990, 21(3), p 275–284CrossRef

N.R. Stansel, Induction Heating Handbook, McGraw-Hill, 1979

S. Zinn and S.L. Semiatin, Coil Design and Fabrication: Basic Design and Modifications, Heat Treat., June 1988, p 32–36

10.

J. Reason, Watch Materials Properties During Induction Bending, Power, 1987, 131(12), p 33–36

11.

J. Davies and P. Simpson, Induction Heating Handbook, McGraw-Hill, 1979

12.

G. Dahake, Precision Induction Heating with Advanced Solid State Technology. http://www.ameritherm.com/PDFs/prec_ind_htg.pdf?84,179. Accessed May 2009

Title: An Experimental Evaluation of the Temperature Profiles in Super Duplex Pipe Subjected to Induction Heating and Bending
Authors: G. J. Collie
I. Black
Publication date: 01-02-2011
Publisher: Springer US
Published in: Journal of Materials Engineering and Performance / Issue 1/2011
Print ISSN: 1059-9495
Electronic ISSN: 1544-1024
DOI: https://doi.org/10.1007/s11665-010-9660-y

Springer Professional

Abstract

Please log in to get access to your license.

Dont have a licence yet? Then find out more about our products and how to get one now:

Springer Professional "Wirtschaft+Technik"

Springer Professional "Technik"

Other articles of this Issue 1/2011

Swan-like Memory Compressive Connector

Tensile and Impact Toughness Properties of Gas Tungsten Arc Welded and Friction Stir Welded Interstitial Free Steel Joints

Design and Clinical Application of Proximal Humerus Memory Connector

Plate Thickness Variation Effects on Crack Growth Rates in 7050-T7451 Alloy Thick Plate

Energy Efficient Heat Treatment for Linerless Hypereutectic Al-Si Engine Blocks Made Using Vacuum HPDC Process

Development of a Robust and Cost-Effective Friction Stir Welding Process for Use in Advanced Military Vehicles

Premium Partners